The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes#8876.
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
This PR adds a new config option to the `push` section of the homeserver config, `group_unread_count_by_room`. By default Synapse will group push notifications by room (so if you have 1000 unread messages, if they lie in 55 rooms, you'll see an unread count on your phone of 55).
However, it is also useful to be able to send out the true count of unread messages if desired. If `group_unread_count_by_room` is set to `false`, then with the above example, one would see an unread count of 1000 (email anyone?).
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
The [postgres setup docs](https://github.com/matrix-org/synapse/blob/develop/docs/postgres.md#set-up-database) recommend setting up your database with user `synapse_user`.
However, uncommenting the postgres defaults in the sample config leave you with user `synapse`.
This PR switches the sample config to recommend `synapse_user`. Took a me a second to figure this out, so assume this will beneficial to others.
Fixes https://github.com/matrix-org/synapse/issues/2431
Adds config option `encryption_enabled_by_default_for_room_type`, which determines whether encryption should be enabled with the default encryption algorithm in private or public rooms upon creation. Whether the room is private or public is decided based upon the room creation preset that is used.
Part of this PR is also pulling out all of the individual instances of `m.megolm.v1.aes-sha2` into a constant variable to eliminate typos ala https://github.com/matrix-org/synapse/pull/7637
Based on #7637
* Expose `return_html_error`, and allow it to take a Jinja2 template instead of a raw string
* Clean up exception handling in SAML2ResponseResource
* use the existing code in `return_html_error` instead of re-implementing it
(giving it a jinja2 template rather than inventing a new form of template)
* do the exception-catching in the REST layer rather than in the handler
layer, to make sure we catch all exceptions.
'client_auth_method' commented out value was erronously 'client_auth_basic',
when code and docstring says it should be 'client_secret_basic'.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
That fallback sets the redirect URL to itself (so it can process the login
token then return gracefully to the client). This would make it pointless to
ask the user for confirmation, since the URL the confirmation page would be
showing wouldn't be the client's.
* Give `notif_template_html`, `notif_template_text` default values (fixes#6960)
* Don't complain if `smtp_host` and `smtp_port` are unset, since they have sensible defaults (fixes#6961)
* Set the example for `enable_notifs` to `True`, for consistency and because it's more useful
* Raise errors as ConfigError rather than RuntimeError for nicer formatting
Generally try to make this more comprehensible, and make it match the
conventions.
I've removed the documentation for all the settings which allow you to change
the names of the template files, because I can't really see why they are
useful.
Second part of solving #6076Fixes#6076
We return a submit_url parameter on calls to POST */msisdn/requestToken so that clients know where to submit token information to.
Uses a SimpleHttpClient instance equipped with the federation_ip_range_blacklist list for requests to identity servers provided by user input. Does not use a blacklist when contacting identity servers specified by account_threepid_delegates. The homeserver trusts the latter and we don't want to prevent homeserver admins from specifying delegates that are on internal IP addresses.
Fixes#5935
We want to assign unique mxids to saml users based on an incrementing
suffix. For that to work, we need to record the allocated mxid in a separate
table.
This is a combination of a few different PRs, finally all being merged into `develop`:
* #5875
* #5876
* #5868 (This one added the `/versions` flag but the flag itself was actually [backed out](891afb57cb (diff-e591d42d30690ffb79f63bb726200891)) in #5969. What's left is just giving /versions access to the config file, which could be useful in the future)
* #5835
* #5969
* #5940
Clients should not actually use the new registration functionality until https://github.com/matrix-org/synapse/pull/5972 is merged.
UPGRADE.rst, changelog entries and config file changes should all be reviewed closely before this PR is merged.
Template config files
* Imagine a system composed entirely of x, y, z etc and the basic operations..
Wait George, why XOR? Why not just neq?
George: Eh, I didn't think of that..
Co-Authored-By: Erik Johnston <erik@matrix.org>
The `expire_access_token` didn't do what it sounded like it should do. What it
actually did was make Synapse enforce the 'time' caveat on macaroons used as
access tokens, but since our access token macaroons never contained such a
caveat, it was always a no-op.
(The code to add 'time' caveats was removed back in v0.18.5, in #1656)
* Opentracing survival guide
* Update decorator names in doc
* Doc cleanup
These are all alterations as a result of comments in #5703, it
includes mostly typos and clarifications. The most interesting
changes are:
- Split developer and user docs into two sections
- Add a high level description of OpenTracing
* newsfile
* Move contributer specific info to docstring.
* Sample config.
* Trailing whitespace.
* Update 5703.misc
* Apply suggestions from code review
Mostly just rewording parts of the docs for clarity.
Co-Authored-By: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
Clean up config settings and dead code.
This is mostly about cleaning up the config format, to bring it into line with our conventions. In particular:
* There should be a blank line after `## Section ##' headings
* There should be a blank line between each config setting
* There should be a `#`-only line between a comment and the setting it describes
* We don't really do the `# #` style commenting-out of whole sections if we can help it
* rename `tracer_enabled` to `enabled`
While we're here, do more config parsing upfront, which makes it easier to use
later on.
Also removes redundant code from LogContextScopeManager.
Also changes the changelog fragment to a `feature` - it's exciting!
* Configure and initialise tracer
Includes config options for the tracer and sets up JaegerClient.
* Scope manager using LogContexts
We piggy-back our tracer scopes by using log context.
The current log context gives us the current scope. If new scope is
created we create a stack of scopes in the context.
* jaeger is a dependency now
* Carrier inject and extraction for Twisted Headers
* Trace federation requests on the way in and out.
The span is created in _started_processing and closed in
_finished_processing because we need a meaningful log context.
* Create logcontext for new scope.
Instead of having a stack of scopes in a logcontext we create a new
context for a new scope if the current logcontext already has a scope.
* Remove scope from logcontext if logcontext is top level
* Disable tracer if not configured
* typo
* Remove dependence on jaeger internals
* bools
* Set service name
* :Explicitely state that the tracer is disabled
* Black is the new black
* Newsfile
* Code style
* Use the new config setup.
* Generate config.
* Copyright
* Rename config to opentracing
* Remove user whitelisting
* Empty whitelist by default
* User ConfigError instead of RuntimeError
* Use isinstance
* Use tag constants for opentracing.
* Remove debug comment and no need to explicitely record error
* Two errors a "s(c)entry"
* Docstrings!
* Remove debugging brainslip
* Homeserver Whitlisting
* Better opentracing config comment
* linting
* Inclue worker name in service_name
* Make opentracing an optional dependency
* Neater config retreival
* Clean up dummy tags
* Instantiate tracing as object instead of global class
* Inlcude opentracing as a homeserver member.
* Thread opentracing to the request level
* Reference opetnracing through hs
* Instantiate dummy opentracin g for tests.
* About to revert, just keeping the unfinished changes just in case
* Revert back to global state, commit number:
9ce4a3d9067bf9889b86c360c05ac88618b85c4f
* Use class level methods in tracerutils
* Start and stop requests spans in a place where we
have access to the authenticated entity
* Seen it, isort it
* Make sure to close the active span.
* I'm getting black and blue from this.
* Logger formatting
Co-Authored-By: Erik Johnston <erik@matrix.org>
* Outdated comment
* Import opentracing at the top
* Return a contextmanager
* Start tracing client requests from the servlet
* Return noop context manager if not tracing
* Explicitely say that these are federation requests
* Include servlet name in client requests
* Use context manager
* Move opentracing to logging/
* Seen it, isort it again!
* Ignore twisted return exceptions on context exit
* Escape the scope
* Scopes should be entered to make them useful.
* Nicer decorator names
* Just one init, init?
* Don't need to close something that isn't open
* Docs make you smarter
Patrick Cloke