`uDom` is old and crusty and `dom` is meant as replacement. The
goal of `dom` is to be simpler and mainly just convenience
methods for handling the DOM with vanilla JS -- this is not a
framework.
Additionally, removed keyboard shortcuts pane which was useful
only on very old versions of Firefox.
Spurious updates to registered content scripts would occur when
using some regional lists, for example DEU would cause spurious
updates to registered script `css-procedural`.
Network filters with csp= option will now be enforced.
Caveat: DNR API does not have support for exception csp= rules,
so excepted csp= filters are currently rejected at conversion time.
This commit adds the ability to inject entity-based plain CSS
filters and also a set of the most commonly used entity-based
scriptlet injection filters.
Since the scripting API is not compatible with entity patterns,
the entity-related content scripts are injected in all documents
and the entity-matching is done by the content script themselves.
Given this, entity-based content scripts are enabled only when
working in the Complete filtering mode, there won't be any
entity-based filters injected in lower modes.
Also, since there is no way to reasonably have access to the
Public Suffix List in the content scripts, the entity-matching
algorithm is an approximation, though I expect false positives
to be rare (time will tell). In the event of such false
positive, simply falling back to Optimal mode will fix the
issue.
The following issues have been fixed at the same time:
Fixed the no-filtering mode related rules having lower priority
then redirect rules, i.e. redirect rules would still be applied
despite disabling all filtering on a site.
Fixed improper detection of changes to the generic-related CSS
content script, potentially causing undue delays when for example
trying to access the popup panel while working in Complete mode.
The scripting MV3 can be quite slow when registering/updating
large content scripts, so uBOL does its best to call the API only
if really needed, but there had been a regression in the recent
builds preventing uBO from properly detecting unchanged content
script parameters.
This adds support for `redirect=` filters. As with `removeparam=`
filters, `redirect=` filters can only be enforced when the
default filtering mode is set to Optimal or Complete, since these
filters require broad host permissions to be enforced by the DNR
engine.
`redirect-rule=` filters are not supported since there is no
corresponding DNR syntax.
Additionally, fixed the dropping of whole network filters even though
those filters are still useful despite not being completely
enforceable -- for example a filter with a single (unsupported) domain
using entity syntax in its `domain=` option should not be wholly
dropped when there are other valid domains in the list.
With the new csstree-based parser, it should now be
safe to parse `-abp-has` as declarative. There are over
a hundred such cosmetic filters in EasyList, and we want
to have these filters declaratively enforced whenever
possible in order to let the browser do the work natively
rather than rely on JS code.
The addition of those scriptlets will help uBOL to properly
filter more anti-blocker mechanisms on various site and also prevents
popups on many sites.
Also, fixed properly injecting scriptlets in embedded frames -- it
turns out I misunderstood the `allFrames` settings in the `scripting`
API.
Fixed trusted sites not being excluded from declarative
scripting.
Assign "uBOL_"-prefixed name to anonymous scripting functions
so that they can be easily found in performance profiler results
in dev tools.
Imrpove spread of chunks of filters across declarative scripting
files.
Consequently, AdGuard URL Tracking Protection (AUTP) has been
added to the set of available filter lists.
However, removeparam= equivalent DNR rules can only be enforced
when granting uBOL broad permissions. If broad permissions are
not granted, removeparam= equivalent DNR rules are ignored.
Exception removeparam= filters are not supported, and these are
present in AUTP and meant to unbreak some websites which are
known to break as a result of removing query parameters.
This is issue might be mitigated in the future by making the
conversion from filters to DNR rules more complicated but this
can never replace the accuracy of uBO's filtering engine being
able to fully enforce arbitrary exception removeparam= filters.
Also, it is not possible to translate regex-based removeparam=
values to DNR rules, so these are dropped at conversion time.
As with other filters to DNR rules conversion, the converter
coallesce many distinct removeparam= filters into fewer DNR
rules.
The new parser no longer uses the browser DOM to validate
that a cosmetic filter is valid or not, this is now done
through a JS library, CSSTree.
This means filter list authors will have to be more careful
to ensure that a cosmetic filter is really valid, as there is
no more guarantee that a cosmetic filter which works for a
given browser/version will still work properly on another
browser, or different version of the same browser.
This change has become necessary because of many reasons,
one of them being the flakiness of the previous parser as
exposed by many issues lately:
- https://github.com/uBlockOrigin/uBlock-issues/issues/2262
- https://github.com/uBlockOrigin/uBlock-issues/issues/2228
The new parser introduces breaking changes, there was no way
to do otherwise. Some current procedural cosmetic filters will
be shown as invalid with this change. This occurs because the
CSSTree library gets confused with some syntax which was
previously allowed by the previous parser because it was more
permissive.
Mainly the issue is with the arguments passed to some procedural
cosmetic filters, and these issues can be solved as follow:
Use quotes around the argument. You can use either single or
double-quotes, whichever is most convenient. If your argument
contains a single quote, use double-quotes, and vice versa.
Additionally, try to escape a quote inside an argument using
backslash. THis may work, but if not, use quotes around the
argument.
When the parser encounter quotes around an argument, it will
discard them before trying to process the argument, same with
escaped quotes inside the argument. Examples:
Breakage:
...##^script:has-text(toscr')
Fix:
...##^script:has-text(toscr\')
Breakage:
...##:xpath(//*[contains(text(),"VPN")]):upward(2)
Fix:
...##:xpath('//*[contains(text(),"VPN")]'):upward(2)
There are not many filters which break in the default set of
filter lists, so this should be workable for default lists.
Unfortunately those fixes will break the filter for previous
versions of uBO since these to not deal with quoted argument.
In such case, it may be necessary to keep the previous filter,
which will be discarded as broken on newer version of uBO.
THis was a necessary change as the old parser was becoming
more and more flaky after being constantly patched for new
cases arising, The new parser should be far more robust and
stay robist through expanding procedural cosmetic filter
syntax.
Additionally, in the MV3 version, filters are pre-compiled
using a Nodejs script, i.e. outside the browser, so validating
cosmetic filters using a live DOM no longer made sense.
This new parser will have to be tested throughly before stable
release.
This solves the following remaining issues regarding specific cosmetic
filtering:
- High rate of false positives in last build
- High number of generated content css files in the package
First iteration of adding scriptlet support. As with cosmetic
filtering, scriptlet niijection occurs only on sites for which
uBO Lite was granted extended permissions.
At the moment, only three scriptlets are supported:
- abort-current-script
- json-prune
- set-constant
More will be added in the future.
Specific plain CSS cosmetic filters are now supported.
Cosmetic filtering will occur only after the user explicitly
grant uBO extended permissions for a given site, so that it
can inject CSS on the site.
A new button in the popup panel allows a user to grant/revoke
extended permissions to/from uBO Lite for the current site.
More capabilities will be carefully added for when extended
permissions are granted on a site, so specific cosmetic
filtering through plain CSS is the first implemented capability.
Generic and procedural cosmetic filtering is not implemented.
The current implementation for plain CSS cosmetic filters is
through declarative content injection, which does not require
the service worker to be alive, the browser takes care to
inject the cosmetic filters.
However declarative CSS injection does not support user
styles, so the injected cosmetic filters are "weak". I consider
this is a browser issue, since user styles are supported by
Chromium, there is just no way in the API to specify user
styles for the injected content.
Also:
- Fixed dark theme issues
- Added Steven Black's hosts file
Keep in mind all this is very experimental and implementation
details in this release may (will) greatly change in the future.
Related discussion:
- a0a9497b4a (commitcomment-62560291)
The new setting, when disabled (enabled by default), allows a user
to prevent uBO from waiting for all filter lists to be loaded
before allowing network activity at launch. The setting is enabled
by default, meaning uBO waits for all filter lists to be loaded in
memory before unsuspending network activity. Some users may find
this behavior undesirable, hence the new setting.
This gives the option to potentially speed up page load at launch,
at the cost of potentially not properly filtering network requests
as per filter lists/rules.
For platforms not supporting the suspension of network activity,
the setting will merely prevent whatever mechanism exists on the
platform to mitigate improper filtering of network requests at
launch. For example, in Chromium-based browsers, unchecking the
new setting will prevent the browser from re-loading tabs for
which there was network activity while in "suspended" state at
launch.
Fixed serious regression in previous dev build in applying
`csp=` filters. Reported internally by uBO team.
Promote usage of `removeparam` in code instead of `queryprune`,
which is to be deprecated.
Removed test against previously tested hostname in
FilterHostnameDict since as per various benchmark, the
test does not really help.
Remove serialization API in Node.js code as the API is now
present in SNFE itself.
Not sure this can really happen, but if ever Math.random() would
return `0.9999999999999999`, the attribute name would start with
`{`, i.e. an invalid attribute name.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/1732
The regression affect filter with the `important` option when
the following conditions were fulfilled:
- The filter pattern is pure hostname
- The filter has not one of the following options:
- domain
- denyallow
- header
- strict1p, strict3p
- csp
- removeparam
- There is a matching exception filter
Related commit:
- a2a8ef7e85
A related mocha test has been added in order to detect this
specific regression in the future through `make test`.
This is a replacement for the dubious approach when the
extension itself was used to run benchmarks to detect
performance and filtering behavior regressions.
The main nodejs flavor is "npm", which is to be used to
lint/test and the publication of an official npm
package -- and by design it has dependencies on mocha,
eslint, etc.
A new flavor "dig" has been created with minimal
dependencies and which purpose is to easily allow to
write specialized code to investigate local code changes
in uBO -- and it's not meant for publication.
Consequently, "make nodejs" has been replaced with
"make npm", and a new "dig" target has been added to the
makefile, to be used for instrumenting local code changes
for investigation purpose.
Whereas before the string segment was encoded as:
LL OOOOOOOOOOOO
where L are the upper 8 bits and used to encode the length
of the segment, and O are the lower 24 bits and used to
encode the offset of the string data in the character
buffer, the new code encode as follow:
OOOOOOOOOOOO LL
And furthermore the most significant bit of the length
LL is now used to mark whether the current string segment
is a label boundary.
This means a cell can't reference a segment longer then
127 characters. To work around this limitation for when a
segment is longer than 127 characters (a rare occurrence),
the algorithm will simply split the segment into multiple
adjacent cells.
As a result, there is no longer a need to encode
"boundariness" into special cells, which simplifies
both the storing and matching algorithms.
Additionally, added minimal documentation for the NPM
package on how to import and use HNTrieContainer as a
standalone API.
For clients who may wish to persist the intermediate compiled form
in order to be able to skip costly parsing operation when the
list is fed to the static network filtering engine.
In the static network filtering engine (snfe), the
compiling-related code was spread across two classes.
This commit makes it so that all the compiling-related
code is in FilterCompiler class, which clear purpose is
to compile raw filters into a form which can be persisted
and later fed to the snfe with no parsing overhead.
To compile raw static network filter, the new approach is:
snfe.createCompiler(parser);
Then for each single raw filter to compile:
compiler.compile(parser, writer);
The caller is responsible to keep a reference to the
compiler instance for as long as it is needed. This removes
the need for the clunky code used to keep an instance of
compiler alive in the snfe.
Additionally, snfe.tokenHistograms() has been moved to
benchmarks.js, as it has no dependency on the snfe, it's
just a utility function.
Ports can be disconnected under certain conditions,
and in such case runtime.lastError must be accessed
to avoid the extensions framework from emitting
error messages in the console.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/1664
The changes are enough to fulfill the related issue.
A new platform has been added in order to allow for building
a NodeJS package. From the root of the project:
./tools/make-nodejs
This will create new uBlock0.nodejs directory in the
./dist/build directory, which is a valid NodeJS package.
From the root of the package, you can try:
node test
This will instantiate a static network filtering engine,
populated by easylist and easyprivacy, which can be used
to match network requests by filling the appropriate
filtering context object.
The test.js file contains code which is typical example
of usage of the package.
Limitations: the NodeJS package can't execute the WASM
versions of the code since the WASM module requires the
use of fetch(), which is not available in NodeJS.
This is a first pass at modularizing the codebase, and
while at it a number of opportunistic small rewrites
have also been made.
This commit requires the minimum supported version for
Chromium and Firefox be raised to 61 and 60 respectively.
Disconnected ports could still happen Even when the port
was still seen as valid internally. Using a try-catch
block makes invalid port detection more reliable. This
is an occurrence I often encountered when stepping into
content script code, causing suprious error messages to
be thrown into uBO's background dev console.
Though Firefox shares a lot of WebExtensions code with Chromium,
these platforms have their own specific code paths, for various
reasons.
The reorganization here makes it clear that Chromium platform is
just one flavor of WebExtensions, and as such all Chromium-specific
code paths should no longer be automatically pulled by other
platforms where these code paths are not needed.
Given that the filepath of many files changed, here is the
parent commit to quickly browse back to the previous directory
layout:
ec7db30b2f
There were spurious error messages in the dev console of
uBO in Firefox, because Firefox does not silently ignore
duplicate contextual menu entries, which could occur
transiently when the contextual menu entries were updated.
The fix simplifies contextual menu code, and actually
fulfill the original goal of avoiding to call extensions
framework API as much as possible.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/1513
Prior to this commit, the ability to enable/disable the
uncloaking of canonical names was only available to advanced
users. This commit make it so that the setting can be
toggled from the _Settings_ pane.
The setting is enabled by default. The documentation should
be clear that the setting should not be disabled unless it
actually solves serious network issues, for example:
https://bugzilla.mozilla.org/show_bug.cgi?id=1694404
Also, as a result, the advanced setting `cnameUncloak` is no
longer available from within the advanced settings editor.
The managed `userSettings` entry is an array of entries,
where each entry is a name/value pair encoded into an array
of strings.
The first item in the entry array is the name of a setting,
and the second item is the stringified value for the
setting.
This is a more convenient way for administrators to set
specific user settings. The settings set through
`userSettings` policy will always be set at uBO launch
time.
The new entry is an array of strings, each representing a
distinct line, and all entries are used to populate the
"My filters" pane.
This offers an more straightforward way for administrators
to specify a list of custom filters to use for all
installations.
The entry `toOverwrite.filterLists` is an array of
string, where each string is a token identifying a
stock filter list, or a URL for an external filter
list.
This new entry is to make it easier for an
administrator to centrally configure uBO with a
custom set of filter lists.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/1433
The new "extraTrustedSiteDirectives" policy is an array
of strings, each of which is parsed as a trusted-site
directive to append to a user's own set of trusted-site
directives at launch time.
The added trusted-site directives will be considered as
part of the default set of directives by uBO.
Related issue:
- https://github.com/gorhill/uBlock/issues/1744
A new context menu entry, "Block element in frame...", will
be present when right-clicking on a frame element. When
this entry is clicked, uBO's element picker will be
launched from within the embedded frame and function the
same way as when launched from within the page.
The condition has been spotted occurring when bringing
up the DOM inspector for a page on which cosmetic filters
are being applied.
Not clear why this happens, but uBO must be ready to
graciously handle such condition.
Reported internally by @gwarser.
In rare occasion, a timing issue could cause uBO to redirect
to a web accessible resource meant to be used for another
network request. This is a regression introduced with the
following commit:
- 2e5d32e967
Additionally, I identified another issue which would cause
cached redirection to fail when a cache entry with redirection
to a web accessible resource was being reused, an issue which
could especially affect pages which are generated dynamically
(i.e. without full page reload).
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/760
The purpose of this new network filter option is to remove
query parameters form the URL of network requests.
The name `queryprune` has been picked over `querystrip`
since the purpose of the option is to remove some
parameters from the URL rather than all parameters.
`queryprune` is a modifier option (like `csp`) in that it
does not cause a network request to be blocked but rather
modified before being emitted.
`queryprune` must be assigned a value, which value will
determine which parameters from a query string will be
removed. The syntax for the value is that of regular
expression *except* for the following rules:
- do not wrap the regex directive between `/`
- do not use regex special values `^` and `$`
- do not use literal comma character in the value,
though you can use hex-encoded version, `\x2c`
- to match the start of a query parameter, prepend `|`
- to match the end of a query parameter, append `|`
`queryprune` regex-like values will be tested against each
key-value parameter pair as `[key]=[value]` string. This
way you can prune according to either the key, the value,
or both.
This commit introduces the concept of modifier filter
options, which as of now are:
- `csp=`
- `queryprune=`
They both work in similar way when used with `important`
option or when used in exception filters. Modifier
options can apply to any network requests, hence the
logger reports the type of the network requests, and no
longer use the modifier as the type, i.e. `csp` filters
are no longer reported as requests of type `csp`.
Though modifier options can apply to any network requests,
for the time being the `csp=` modifier option still apply
only to top or embedded (frame) documents, just as before.
In some future we may want to apply `csp=` directives to
network requests of type script, to control the behavior
of service workers for example.
A new built-in filter expression has been added to the
logger: "modified", which allow to see all the network
requests which were modified before being emitted. The
translation work for this new option will be available
in a future commit.
Months ago, usage of synchronous localStorage was replaced
with asynchronous extension storage. There was code for the
conversion to be seamless by importing the content of now
obsolete localStorage.
This code is no longer needed as majority of users are
assumed to use versions of uBO above 1.25.0.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/899
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/763
Changes:
From now on, uBO will allow click-to-subscribe on only
a few select domains, currently:
- https://filterlists.com/
- https://github.com/
- https://github.io/
More domains can be added if and only the demonstration
is made that more than a marginal number of filter lists
can be subscribed from those domains.
The browser alert box is no longer used to confirm
subscription to a filter list. Instead, the asset
viewer has been expanded to serve that purpose. This
way, users can peruse at the content of a filter list
before subscribing to it.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/1226
Related commit:
- 9eb455ab5e
In the previous commit, the element picker dialog was
isolated from the page content. This commit is to also
isolate the svg layers from the page content.
With this commit, there is no longer a need for an anonymous
iframe and the isolated world iframe is now directly
embedded in the page.
As a result, pages are now unable to interfere with any
of the element picker user interface. Pages can now only
see an iframe, but are unable to see the content of that
iframe. The styles applied to the iframe are from a user
stylesheet, so as to ensure pages can't override the
iframe's style properties set by uBO.
This commit fixes deleting all entries when cloud
storage usage is beyond allowed limit.
The issue would prevent pushing new data well within
quota limit because the old data beyond limit was
never removed in the first place.
Cloud storage is a limited resource, and thus it
makes sense to support data compression before
sending the data to cloud storage.
A new hidden setting allows to toggle on
cloud storage compression:
name: cloudStorageCompression
default: false
By default, this hidden setting is `false`, and a
user must set it to `true` to enable compression
of cloud storage items.
This hidden setting will eventually be toggled
to `true` by default, when there is good confidence
a majority of users are using a version of uBO
which can properly handle compressed cloud storage
items.
A cursory assessment shows that compressed items
are roughly 40-50% smaller in size.
The pseudo user styles code served only browsers based
on Chromium 65 and earlier -- Chromium 66 supports
native user styles and was first released more than two
years ago.
In Chromium-based browsers, the pseudo user styles code
is being unconditionally injected in every page/frame
just in case the browser is version 65 or earlier.
Removing pseudo user styles reduce uBO's main content
script in Chromium-based browsers by more than 20K.
Related thread:
- https://github.com/NanoAdblocker/NanoCore/issues/348#issuecomment-653646507
Related discussion:
- https://bugzilla.mozilla.org/show_bug.cgi?id=1652925
It's not clear the code here will fix the reported
issue, but I did identify that the subframe
dictionary of a very long-lived web page can
theoretically grow unbound.
Related feedback:
- https://www.reddit.com/r/uBlockOrigin/comments/hbea3z/
It appears the implementation of the `disable_non_proxied_udp`
setting changed in Chromium, leading to WebRTC becoming
wholly unfunctional. Fall back to use `default_public_interface_only`
in Chromium-based browsers.
The old "classic" popup panel will still be used
when at least one of the following is true:
- advanced setting `uiFlavor` is set to `classic`; or
- the browser is Chromium 65 or older; or
- the browser is Firefox 67 or older
The default configuration of the new popup panel
at installation time is to show the power button,
statistics and the basic tool icons, i.e. access
to dashboard, logger, pickers.
For existing installations, the new popup panel
will be configured by respecting the existing
configuration of the classic one.
The new popup panel is currently already in use
on Firefox for Android, and the visual redesign
was made according to suggestions and feedback
from <https://github.com/brampitoyo> to be
optimal for Firefox for Android.
The new popup panel will allow closing the following
pending issues:
- https://github.com/uBlockOrigin/uBlock-issues/issues/255
- https://github.com/uBlockOrigin/uBlock-issues/issues/178
Related commit:
- 2ac288397c
Instead of having the `localStorage` data being accessed
from different locations, all accesses are now funnelled
to the main process.
Doing so simplifies the code in auxiliary processes and
also remove the need for browser.storage.local.onChanged()
listeners.
No longer using an onChanged() listener also happens to
remove spurious warnings from the Firefox console.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/911
Since cname-uncloaking is available only on Firefox
at the moment, the fix is relevant only to Firefox.
By default uBO will no longer cname-uncloak when it
detects that network requests are being being proxied.
This default behavior can be overriden by setting the
new advanced setting `cnameUncloakProxied` to `true`.
The new setting default to `false`, i.e. cname-uncloaking
is disabled when uBO detects that a proxy is in use.
This new advanced setting may disappear once the
following Firefox issue is fixed:
- https://bugzilla.mozilla.org/show_bug.cgi?id=1618271
***
New procedural cosmetic operator: `:remove()`
Related issue:
- https://github.com/gorhill/uBlock/issues/2252
The purpose is to outright remove elements from the
DOM tree. Since `:remove()` is an "action" operator,
it must only be used as a trailing operator (just
like the `:style()` operator).
AdGuard's cosmetic filter syntax `{ remove: true; }`
will be converted to uBO's `:remove()` operator
internally.
***
New procedural cosmetic operator: `:upward(...)`
The purpose is to lookup an ancestor element.
When used with an integer argument, it is synonym of
`:nth-ancestor()`, which will be deprecated and which
will no longer be supported once no longer used in
mainstream filter lists.
Filter lists maintainers must only use `:upward(int)`
instead of `:nth-ancestor(int)` once the new operator
become available in all stable releases of uBO.
`:upward()` can also accept a CSS selector as argument,
in which case the nearest ancestor which matches the
CSS selector will be selected.
The stricter mode `disable_non_proxied_udp` is preferable
to `default_public_interface_only` to prevent local IP
address leakage through WebRTC.
This mode is properly supported since Firefox 70, so the
less strict `default_public_interface_only` will now be
used only for Firefox 69 and older.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/899
browser.storage.local is now used to store non-critical
local settings.
These settings are all collated under the key
`localStorage`, and vAPI.localStorage is an API to
handle access to these values stored under this key.
vAPI.localStorage.getItem() is still synchronous but
its purpose is to return internally cached values --
this minimizes code changes throughout uBO.
This is to fix the rendering of the menu entry in
Firefox Fenix, which displays both the icon title
and badge text as a menu entry:
Before the fix:
uBlock Origin (76) 76
After the fix:
uBlock Origin 76
The badge text will still be part of the icon title
when the icon badge is disabled by the user or when
the platform does not supprt browserAction.setIcon()
(as is the case on current Firefox for Android).
Advanced setting `cnameAliasList` has been removed.
New advanced settings:
cnameUncloak:
Boolean
Default value:
true
Description:
Whether to CNAME-uncloak hostnames.
cnameIgnoreExceptions:
Boolean
Default value:
true
Description:
Whether to bypass the uncloaking of network requests
which were excepted by filters/rules. This is
necessary so as to avoid undue breakage by having
exception filters being rendered useless as a result
of CNAME-uncloaking.
For example, `google-analytics.com` uncloaks to
`www-google-analytics.l.google.com` and both hostnames
appear in Peter Lowe's list, which means exception
filters for `google-analytics.com` (to fix site
breakage) would be rendered useless as the uncloaking
would cause the network request to be ultimately
blocked.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/780
Related commit:
- https://github.com/gorhill/uBlock/commit/3a564c199260
This adds two new advanced settings:
- cnameIgnoreRootDocument
- Default to `true`
- Tells uBO to skip CNAME-lookup for root document.
- cnameReplayFullURL
- Default to `false`
- Tells uBO whether to replay the whole URL or just
the origin part of it.
Replaying only the origin part is meant to lower
undue breakage and improve performance by avoiding
repeating the pattern-matching of the whole URL --
which pattern-matching was most likely already
accomplished with the original request.
This commit is meant to explore enabling CNAME-lookup
by default for the next stable release while:
- Eliminating a development burden by removing the
need to create a new filtering syntax to deal with
undesirable CNAME-cloaked hostnames
- Eliminating a filter list maintainer burden by
removing the need to find/deal with all base
domains which engage in undesirable CNAME-cloaked
hostnames
The hope is that the approach implemented in this
commit should require at most a few unbreak rules
with no further need for special filtering syntax
or filter list maintance efforts.
This fixes the ability to block when a hostname
had to be cname-resolved the first time it was
encountered. The result being cached allowed
the subsequent requests to be correctly blockable.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/780
- Handle DNS lookup failure
- Skip DNS lookup for non network-based URLs
- Benchmark code to be able to provide an estimate
based on objective measurements regarding added
overhead when DNS lookup is enabled
(quick answer: a complete non-issue)
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/780
New webext permission added: `dns`, which purpose is
to allow an extension to fetch the DNS record of
specific hostnames, reference documentation:
https://developer.mozilla.org/en-US/docs/Mozilla/Add-ons/WebExtensions/API/dns
The webext API `dns` is available in Firefox 60+ only.
The new API will enable uBO to "uncloak" the actual
hostname used in network requests. The ability is
currently disabled by default for now -- this is only
a first commit related to the above issue to allow
advanced users to immediately use the new ability.
Four advanced settings have been created to control the
uncloaking of actual hostnames:
cnameAliasList: a space-separated list of hostnames.
Default value: unset => empty list.
Special value: * => all hostnames.
A space-separated list of hostnames => this tells uBO
to "uncloak" the hostnames in the list will.
cnameIgnoreList: a space-separated list of hostnames.
Default value: unset => empty list.
Special value: * => all hostnames.
A space-separated list of hostnames => this tells uBO
to NOT re-run the network request through uBO's
filtering engine with the CNAME hostname. This is
useful to exclude commonly used actual hostnames
from being re-run through uBO's filtering engine, so
as to avoid pointless overhead.
cnameIgnore1stParty: boolean.
Default value: true.
Whether uBO should ignore to re-run a network request
through the filtering engine when the CNAME hostname
is 1st-party to the alias hostname.
cnameMaxTTL: number of minutes.
Default value: 120.
This tells uBO to clear its CNAME cache after the
specified time. For efficiency purpose, uBO will
cache alias=>CNAME associations for reuse so as
to reduce calls to `browser.dns.resolve`. All the
associations will be cleared after the specified time
to ensure the map does not grow too large and too
ensure uBO uses up to date CNAME information.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/759
If for some reasons the launch code throws, uBO could
find itself in permanent suspend mode, thus preventing
web pages from loading in Firefox.
Though uBO should not have exceptions thrown during
it's initialization code, this commit will ensure
uBO complete its initialization process should it
ever happen for whatever reason.
Tabless network requests were bypassing uBO's
onBeforeRequest's listener when in suspended
mode. Suspend mode occurs during the time the
filter lists are all reloaded.
Regression from:
- 1dfdc40e09 (diff-d04c15ee6bff6a6269c6aee25a7c7522R1122)
Related commit:
- 87d0e456f1
Ensure that the code which depends on extending
`vapi-client.js` is ready to deal with
`vapi-client-extra.js` failing to load.
These spurious error messages can occur when a
extension framework API method return a
rejected Promise. In uBO the results of
browserAction methods is not used so it can be
safely discarded.
Related feedback:
- https://www.reddit.com/r/uBlockOrigin/comments/d6zbqv/
For static filter `popup` filter purpose, the URL of the
embedded frame from which the popup was launched will
be used in the matching algorithm.
... from platform-independent code.
This should complete the de-chromiumification of
uBO. Next step will be to swap the content of the
`platform/chromium` and `platform/firefox`
folders so as to reflect that Firefox is the
natural platform for uBO.
Little-used code from vapi-client.js has been moved
to vapi-client-extra.js. Given that vapi-client.js
is injected in all web pages, this means less dead
code being injected in all pages.
Swathes of code in vapi-client.js was used only in
a few very specific cases, such as when the logger's
DOM inspector is opened or when the "Filter lists"
pane in the dashboard is opened -- and thus to avoid
that little used code to be loaded in every web page
unconditionally, it has been moved to its own
separate file, vapi-client.extra.js.
vapi-client-extra.js is loaded declaratively or
programmatically only where needed.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/710
Messages from unprivileged ports (i.e. from content scripts)
are no longer relayed to message handlers which are to be
strictly used to execute privileged code.
The last remaining case of unprivileged messages which
should be converted into a privileged ones will be taken
care of when the following issue is fixed:
- https://github.com/gorhill/uBlock/issues/3497
Related feedback:
- https://www.reddit.com/r/uBlockOrigin/comments/cmh910/
Additionally, the `3p` rule has been made distinct from
`3p-script`/`3p-frame` for the purpose of
"Relax blocking mode" command.
The badge color will hint at the current blocking mode.
There are four colors for the four following blocking
modes:
- JavaScript wholly disabled
- All 3rd parties blocked
- 3rd-party scripts and frames blocked
- None of the above
The default badge color will be used when JavaScript is not
wholly disabled and when there are no rules for `3p`,
`3p-script` or `3p-frame`.
A new advanced setting has been added to let the user choose
the badge colors for the various blocking modes,
`blockingProfileColors`. The value *must* be a sequence of
4 valid CSS color values that match 6 hexadecimal digits
prefixed with`#` -- anything else will be ignored.
Related Chromium issue:
- https://bugs.chromium.org/p/chromium/issues/detail?id=985759
By expressly restricting JavaScript execution to only code
from the extension package, this explicitly tells code reviewer
that uBO can't execute remote code.
I also had to add `object-src 'self'`, otherwise Chromium
refused to load the extension with the following error message:
> 'content_security_policy': CSP directive 'object-src' must be specified
`object-src 'self'` is the default value.
This works only for platforms supporting the return of
Promise by network listeners, i.e. only Firefox at this
point.
When filter lists are reloaded[1], there is a small
time window in which some network requests which should
have normally been blocked are not being blocked
because the static network filtering engine may not
have yet loaded all the filters in memory
This is now addressed by suspending the network request
handler when filter lists are reloaded -- again, this
works only on supported platforms.
[1] Examples: when a filter list update session
completes; when user filters change, when
adding/removing filter lists.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/371
By default, no specific keyboard shortcut is predefined,
this will have to be assigned by the user. The command
name in English is "Toggle blocking profile".
The default behavior is to toggle down according to one
of the following scenarios.
a) If script execution is disabled through the no-scripting
switch, the no-scripting switch will be locally toggled
so as to allow script execution. The page will be
automatically reloaded.
b) If script execution is not blocked but the 3rd-party
script and/or frame cells are blocked, local no-op rules
will be set so as to no longer block 3rd-party scripts
and/or frames. The page will be automatically reloaded.
Given this, it may take more than one toggle down command
to reach the lowest blocking profile, which is one where
JavaScript execution is not blocked and 3rd-party scripts
and frames resources block rules, if any, are bypassed
with local no-op rules.
TODO: At this point, I haven't yet decided whether
toggling from the lowest profile should restore the
original highest blocking profile.
Regression from:
- 62387fb87a
Repro steps were:
- Open the logger
- Navigate to `https://news.ycombinator.com/`
- Select an element using the element picker
- Click "Preview"
An attribute selector used internally by uBO to
hide targeted nodes was being reported in the
logger.
I had exceptions thrown by that code once in a while,
about the `port` object not being connected; possibly
occurs only when using dev tools with breakpoints
in uBO's code. Even if this can be reproduced randomly
only when debugging uBO, it costs nothing to add code
in there to handle exceptions.
Related issue:
- https://github.com/gorhill/uBlock/issues/127
Additionally, the extended exception filters in the
logger will be rendered with a line-through to more
easily distinguish them from non-exception ones.
Also, opportunistically converted revisited code to
ES6 syntax.
Raymond Hill