wownero/src/blockchain_utilities/bootstrap_file.cpp

479 lines
16 KiB
C++
Raw Normal View History

// Copyright (c) 2014-2017, The Monero Project
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification, are
// permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this list of
// conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
// of conditions and the following disclaimer in the documentation and/or other
// materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its contributors may be
// used to endorse or promote products derived from this software without specific
// prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include "bootstrap_serialization.h"
#include "serialization/binary_utils.h" // dump_binary(), parse_binary()
#include "serialization/json_utils.h" // dump_json()
#include "bootstrap_file.h"
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
#undef MONERO_DEFAULT_LOG_CATEGORY
#define MONERO_DEFAULT_LOG_CATEGORY "bcutil"
namespace po = boost::program_options;
using namespace cryptonote;
using namespace epee;
namespace
{
// This number was picked by taking the leading 4 bytes from this output:
// echo Monero bootstrap file | sha1sum
const uint32_t blockchain_raw_magic = 0x28721586;
const uint32_t header_size = 1024;
std::string refresh_string = "\r \r";
}
bool BootstrapFile::open_writer(const boost::filesystem::path& file_path)
{
const boost::filesystem::path dir_path = file_path.parent_path();
if (!dir_path.empty())
{
if (boost::filesystem::exists(dir_path))
{
if (!boost::filesystem::is_directory(dir_path))
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MFATAL("export directory path is a file: " << dir_path);
return false;
}
}
else
{
if (!boost::filesystem::create_directory(dir_path))
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MFATAL("Failed to create directory " << dir_path);
return false;
}
}
}
m_raw_data_file = new std::ofstream();
bool do_initialize_file = false;
uint64_t num_blocks = 0;
if (! boost::filesystem::exists(file_path))
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MDEBUG("creating file");
do_initialize_file = true;
num_blocks = 0;
}
else
{
num_blocks = count_blocks(file_path.string());
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MDEBUG("appending to existing file with height: " << num_blocks-1 << " total blocks: " << num_blocks);
}
m_height = num_blocks;
if (do_initialize_file)
m_raw_data_file->open(file_path.string(), std::ios_base::binary | std::ios_base::out | std::ios::trunc);
else
m_raw_data_file->open(file_path.string(), std::ios_base::binary | std::ios_base::out | std::ios::app | std::ios::ate);
if (m_raw_data_file->fail())
return false;
m_output_stream = new boost::iostreams::stream<boost::iostreams::back_insert_device<buffer_type>>(m_buffer);
if (m_output_stream == nullptr)
return false;
if (do_initialize_file)
initialize_file();
return true;
}
bool BootstrapFile::initialize_file()
{
const uint32_t file_magic = blockchain_raw_magic;
std::string blob;
if (! ::serialization::dump_binary(file_magic, blob))
{
throw std::runtime_error("Error in serialization of file magic");
}
*m_raw_data_file << blob;
bootstrap::file_info bfi;
bfi.major_version = 0;
bfi.minor_version = 1;
bfi.header_size = header_size;
bootstrap::blocks_info bbi;
bbi.block_first = 0;
bbi.block_last = 0;
bbi.block_last_pos = 0;
buffer_type buffer2;
boost::iostreams::stream<boost::iostreams::back_insert_device<buffer_type>>* output_stream_header;
output_stream_header = new boost::iostreams::stream<boost::iostreams::back_insert_device<buffer_type>>(buffer2);
uint32_t bd_size = 0;
blobdata bd = t_serializable_object_to_blob(bfi);
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MDEBUG("bootstrap::file_info size: " << bd.size());
bd_size = bd.size();
if (! ::serialization::dump_binary(bd_size, blob))
{
throw std::runtime_error("Error in serialization of bootstrap::file_info size");
}
*output_stream_header << blob;
*output_stream_header << bd;
bd = t_serializable_object_to_blob(bbi);
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MDEBUG("bootstrap::blocks_info size: " << bd.size());
bd_size = bd.size();
if (! ::serialization::dump_binary(bd_size, blob))
{
throw std::runtime_error("Error in serialization of bootstrap::blocks_info size");
}
*output_stream_header << blob;
*output_stream_header << bd;
output_stream_header->flush();
*output_stream_header << std::string(header_size-buffer2.size(), 0); // fill in rest with null bytes
output_stream_header->flush();
std::copy(buffer2.begin(), buffer2.end(), std::ostreambuf_iterator<char>(*m_raw_data_file));
return true;
}
void BootstrapFile::flush_chunk()
{
m_output_stream->flush();
uint32_t chunk_size = m_buffer.size();
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
// MTRACE("chunk_size " << chunk_size);
if (chunk_size > BUFFER_SIZE)
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MWARNING("WARNING: chunk_size " << chunk_size << " > BUFFER_SIZE " << BUFFER_SIZE);
}
std::string blob;
if (! ::serialization::dump_binary(chunk_size, blob))
{
throw std::runtime_error("Error in serialization of chunk size");
}
*m_raw_data_file << blob;
if (m_max_chunk < chunk_size)
{
m_max_chunk = chunk_size;
}
long pos_before = m_raw_data_file->tellp();
std::copy(m_buffer.begin(), m_buffer.end(), std::ostreambuf_iterator<char>(*m_raw_data_file));
m_raw_data_file->flush();
long pos_after = m_raw_data_file->tellp();
long num_chars_written = pos_after - pos_before;
if (static_cast<unsigned long>(num_chars_written) != chunk_size)
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MFATAL("Error writing chunk: height: " << m_cur_height << " chunk_size: " << chunk_size << " num chars written: " << num_chars_written);
throw std::runtime_error("Error writing chunk");
}
m_buffer.clear();
delete m_output_stream;
m_output_stream = new boost::iostreams::stream<boost::iostreams::back_insert_device<buffer_type>>(m_buffer);
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MDEBUG("flushed chunk: chunk_size: " << chunk_size);
}
void BootstrapFile::write_block(block& block)
{
bootstrap::block_package bp;
bp.block = block;
std::vector<transaction> txs;
uint64_t block_height = boost::get<txin_gen>(block.miner_tx.vin.front()).height;
// now add all regular transactions
for (const auto& tx_id : block.tx_hashes)
{
if (tx_id == null_hash)
{
throw std::runtime_error("Aborting: tx == null_hash");
}
transaction tx = m_blockchain_storage->get_db().get_tx(tx_id);
txs.push_back(tx);
}
// these non-coinbase txs will be serialized using this structure
bp.txs = txs;
// These three attributes are currently necessary for a fast import that adds blocks without verification.
bool include_extra_block_data = true;
if (include_extra_block_data)
{
size_t block_size = m_blockchain_storage->get_db().get_block_size(block_height);
difficulty_type cumulative_difficulty = m_blockchain_storage->get_db().get_block_cumulative_difficulty(block_height);
uint64_t coins_generated = m_blockchain_storage->get_db().get_block_already_generated_coins(block_height);
bp.block_size = block_size;
bp.cumulative_difficulty = cumulative_difficulty;
bp.coins_generated = coins_generated;
}
blobdata bd = t_serializable_object_to_blob(bp);
m_output_stream->write((const char*)bd.data(), bd.size());
}
bool BootstrapFile::close()
{
if (m_raw_data_file->fail())
return false;
m_raw_data_file->flush();
delete m_output_stream;
delete m_raw_data_file;
return true;
}
bool BootstrapFile::store_blockchain_raw(Blockchain* _blockchain_storage, tx_memory_pool* _tx_pool, boost::filesystem::path& output_file, uint64_t requested_block_stop)
{
uint64_t num_blocks_written = 0;
m_max_chunk = 0;
m_blockchain_storage = _blockchain_storage;
m_tx_pool = _tx_pool;
uint64_t progress_interval = 100;
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MINFO("Storing blocks raw data...");
if (!BootstrapFile::open_writer(output_file))
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MFATAL("failed to open raw file for write");
return false;
}
block b;
// block_start, block_stop use 0-based height. m_height uses 1-based height. So to resume export
// from last exported block, block_start doesn't need to add 1 here, as it's already at the next
// height.
uint64_t block_start = m_height;
uint64_t block_stop = 0;
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MINFO("source blockchain height: " << m_blockchain_storage->get_current_blockchain_height()-1);
if ((requested_block_stop > 0) && (requested_block_stop < m_blockchain_storage->get_current_blockchain_height()))
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MINFO("Using requested block height: " << requested_block_stop);
block_stop = requested_block_stop;
}
else
{
block_stop = m_blockchain_storage->get_current_blockchain_height() - 1;
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MINFO("Using block height of source blockchain: " << block_stop);
}
for (m_cur_height = block_start; m_cur_height <= block_stop; ++m_cur_height)
{
// this method's height refers to 0-based height (genesis block = height 0)
crypto::hash hash = m_blockchain_storage->get_block_id_by_height(m_cur_height);
m_blockchain_storage->get_block_by_hash(hash, b);
write_block(b);
if (m_cur_height % NUM_BLOCKS_PER_CHUNK == 0) {
flush_chunk();
num_blocks_written += NUM_BLOCKS_PER_CHUNK;
}
if (m_cur_height % progress_interval == 0) {
std::cout << refresh_string;
std::cout << "block " << m_cur_height << "/" << block_stop << std::flush;
}
}
// NOTE: use of NUM_BLOCKS_PER_CHUNK is a placeholder in case multi-block chunks are later supported.
if (m_cur_height % NUM_BLOCKS_PER_CHUNK != 0)
{
flush_chunk();
}
// print message for last block, which may not have been printed yet due to progress_interval
std::cout << refresh_string;
std::cout << "block " << m_cur_height-1 << "/" << block_stop << ENDL;
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MINFO("Number of blocks exported: " << num_blocks_written);
if (num_blocks_written > 0)
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MINFO("Largest chunk: " << m_max_chunk << " bytes");
return BootstrapFile::close();
}
uint64_t BootstrapFile::seek_to_first_chunk(std::ifstream& import_file)
{
uint32_t file_magic;
std::string str1;
char buf1[2048];
import_file.read(buf1, sizeof(file_magic));
if (! import_file)
throw std::runtime_error("Error reading expected number of bytes");
str1.assign(buf1, sizeof(file_magic));
if (! ::serialization::parse_binary(str1, file_magic))
throw std::runtime_error("Error in deserialization of file_magic");
if (file_magic != blockchain_raw_magic)
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MFATAL("bootstrap file not recognized");
throw std::runtime_error("Aborting");
}
else
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MINFO("bootstrap file recognized");
uint32_t buflen_file_info;
import_file.read(buf1, sizeof(buflen_file_info));
str1.assign(buf1, sizeof(buflen_file_info));
if (! import_file)
throw std::runtime_error("Error reading expected number of bytes");
if (! ::serialization::parse_binary(str1, buflen_file_info))
throw std::runtime_error("Error in deserialization of buflen_file_info");
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MINFO("bootstrap::file_info size: " << buflen_file_info);
if (buflen_file_info > sizeof(buf1))
throw std::runtime_error("Error: bootstrap::file_info size exceeds buffer size");
import_file.read(buf1, buflen_file_info);
if (! import_file)
throw std::runtime_error("Error reading expected number of bytes");
str1.assign(buf1, buflen_file_info);
bootstrap::file_info bfi;
if (! ::serialization::parse_binary(str1, bfi))
throw std::runtime_error("Error in deserialization of bootstrap::file_info");
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MINFO("bootstrap file v" << unsigned(bfi.major_version) << "." << unsigned(bfi.minor_version));
MINFO("bootstrap magic size: " << sizeof(file_magic));
MINFO("bootstrap header size: " << bfi.header_size);
uint64_t full_header_size = sizeof(file_magic) + bfi.header_size;
import_file.seekg(full_header_size);
return full_header_size;
}
uint64_t BootstrapFile::count_blocks(const std::string& import_file_path)
{
boost::filesystem::path raw_file_path(import_file_path);
boost::system::error_code ec;
if (!boost::filesystem::exists(raw_file_path, ec))
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MFATAL("bootstrap file not found: " << raw_file_path);
throw std::runtime_error("Aborting");
}
std::ifstream import_file;
import_file.open(import_file_path, std::ios_base::binary | std::ifstream::in);
uint64_t h = 0;
if (import_file.fail())
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MFATAL("import_file.open() fail");
throw std::runtime_error("Aborting");
}
uint64_t full_header_size; // 4 byte magic + length of header structures
full_header_size = seek_to_first_chunk(import_file);
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MINFO("Scanning blockchain from bootstrap file...");
block b;
bool quit = false;
uint64_t bytes_read = 0;
int progress_interval = 10;
std::string str1;
char buf1[2048];
while (! quit)
{
uint32_t chunk_size;
import_file.read(buf1, sizeof(chunk_size));
if (!import_file) {
std::cout << refresh_string;
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MDEBUG("End of file reached");
quit = true;
break;
}
h += NUM_BLOCKS_PER_CHUNK;
if ((h-1) % progress_interval == 0)
{
std::cout << "\r" << "block height: " << h-1 <<
" " <<
std::flush;
}
bytes_read += sizeof(chunk_size);
str1.assign(buf1, sizeof(chunk_size));
if (! ::serialization::parse_binary(str1, chunk_size))
throw std::runtime_error("Error in deserialization of chunk_size");
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MDEBUG("chunk_size: " << chunk_size);
if (chunk_size > BUFFER_SIZE)
{
std::cout << refresh_string;
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MWARNING("WARNING: chunk_size " << chunk_size << " > BUFFER_SIZE " << BUFFER_SIZE
<< " height: " << h-1);
throw std::runtime_error("Aborting: chunk size exceeds buffer size");
}
if (chunk_size > 100000)
{
std::cout << refresh_string;
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MDEBUG("NOTE: chunk_size " << chunk_size << " > 100000" << " height: "
<< h-1);
}
else if (chunk_size <= 0) {
std::cout << refresh_string;
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MDEBUG("ERROR: chunk_size " << chunk_size << " <= 0" << " height: " << h-1);
throw std::runtime_error("Aborting");
}
// skip to next expected block size value
import_file.seekg(chunk_size, std::ios_base::cur);
if (! import_file) {
std::cout << refresh_string;
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MFATAL("ERROR: unexpected end of file: bytes read before error: "
<< import_file.gcount() << " of chunk_size " << chunk_size);
throw std::runtime_error("Aborting");
}
bytes_read += chunk_size;
// std::cout << refresh_string;
MDEBUG("Number bytes scanned: " << bytes_read);
}
import_file.close();
std::cout << ENDL;
std::cout << "Done scanning bootstrap file" << ENDL;
std::cout << "Full header length: " << full_header_size << " bytes" << ENDL;
std::cout << "Scanned for blocks: " << bytes_read << " bytes" << ENDL;
std::cout << "Total: " << full_header_size + bytes_read << " bytes" << ENDL;
std::cout << "Number of blocks: " << h << ENDL;
std::cout << ENDL;
// NOTE: h is the number of blocks.
// Note that a block's stored height is zero-based, but parts of the code use
// one-based height.
return h;
}