wownero/tests/core_tests/chaingen.h

760 lines
34 KiB
C
Raw Normal View History

2018-01-06 22:05:16 -07:00
// Copyright (c) 2014-2018, The Monero Project
2014-07-23 07:03:52 -06:00
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification, are
// permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this list of
// conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
// of conditions and the following disclaimer in the documentation and/or other
// materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its contributors may be
// used to endorse or promote products derived from this software without specific
// prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers
2014-03-03 15:07:58 -07:00
#pragma once
#include <vector>
#include <iostream>
#include <stdint.h>
#include <boost/archive/binary_oarchive.hpp>
#include <boost/archive/binary_iarchive.hpp>
#include <boost/program_options.hpp>
#include <boost/serialization/vector.hpp>
#include <boost/serialization/variant.hpp>
#include "include_base_utils.h"
#include "common/boost_serialization_helper.h"
#include "common/command_line.h"
#include "cryptonote_basic/account_boost_serialization.h"
#include "cryptonote_basic/cryptonote_basic.h"
#include "cryptonote_basic/cryptonote_basic_impl.h"
#include "cryptonote_basic/cryptonote_format_utils.h"
2014-03-03 15:07:58 -07:00
#include "cryptonote_core/cryptonote_core.h"
#include "cryptonote_basic/cryptonote_boost_serialization.h"
2014-03-03 15:07:58 -07:00
#include "misc_language.h"
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
#undef MONERO_DEFAULT_LOG_CATEGORY
#define MONERO_DEFAULT_LOG_CATEGORY "tests.core"
2014-03-03 15:07:58 -07:00
struct callback_entry
{
std::string callback_name;
BEGIN_SERIALIZE_OBJECT()
FIELD(callback_name)
END_SERIALIZE()
private:
friend class boost::serialization::access;
template<class Archive>
void serialize(Archive & ar, const unsigned int /*version*/)
{
ar & callback_name;
}
};
template<typename T>
struct serialized_object
{
serialized_object() { }
serialized_object(const cryptonote::blobdata& a_data)
: data(a_data)
{
}
cryptonote::blobdata data;
BEGIN_SERIALIZE_OBJECT()
FIELD(data)
END_SERIALIZE()
private:
friend class boost::serialization::access;
template<class Archive>
void serialize(Archive & ar, const unsigned int /*version*/)
{
ar & data;
}
};
typedef serialized_object<cryptonote::block> serialized_block;
typedef serialized_object<cryptonote::transaction> serialized_transaction;
struct event_visitor_settings
{
int valid_mask;
bool txs_keeped_by_block;
enum settings
{
set_txs_keeped_by_block = 1 << 0
};
event_visitor_settings(int a_valid_mask = 0, bool a_txs_keeped_by_block = false)
: valid_mask(a_valid_mask)
, txs_keeped_by_block(a_txs_keeped_by_block)
{
}
private:
friend class boost::serialization::access;
template<class Archive>
void serialize(Archive & ar, const unsigned int /*version*/)
{
ar & valid_mask;
ar & txs_keeped_by_block;
}
};
VARIANT_TAG(binary_archive, callback_entry, 0xcb);
VARIANT_TAG(binary_archive, cryptonote::account_base, 0xcc);
VARIANT_TAG(binary_archive, serialized_block, 0xcd);
VARIANT_TAG(binary_archive, serialized_transaction, 0xce);
VARIANT_TAG(binary_archive, event_visitor_settings, 0xcf);
typedef boost::variant<cryptonote::block, cryptonote::transaction, std::vector<cryptonote::transaction>, cryptonote::account_base, callback_entry, serialized_block, serialized_transaction, event_visitor_settings> test_event_entry;
2014-03-03 15:07:58 -07:00
typedef std::unordered_map<crypto::hash, const cryptonote::transaction*> map_hash2tx_t;
class test_chain_unit_base
{
public:
typedef boost::function<bool (cryptonote::core& c, size_t ev_index, const std::vector<test_event_entry> &events)> verify_callback;
typedef std::map<std::string, verify_callback> callbacks_map;
void register_callback(const std::string& cb_name, verify_callback cb);
bool verify(const std::string& cb_name, cryptonote::core& c, size_t ev_index, const std::vector<test_event_entry> &events);
private:
callbacks_map m_callbacks;
};
class test_generator
{
public:
struct block_info
{
block_info()
: prev_id()
, already_generated_coins(0)
, block_weight(0)
2014-03-03 15:07:58 -07:00
{
}
block_info(crypto::hash a_prev_id, uint64_t an_already_generated_coins, size_t a_block_weight)
2014-03-03 15:07:58 -07:00
: prev_id(a_prev_id)
, already_generated_coins(an_already_generated_coins)
, block_weight(a_block_weight)
2014-03-03 15:07:58 -07:00
{
}
crypto::hash prev_id;
uint64_t already_generated_coins;
size_t block_weight;
2014-03-03 15:07:58 -07:00
};
enum block_fields
{
bf_none = 0,
bf_major_ver = 1 << 0,
bf_minor_ver = 1 << 1,
bf_timestamp = 1 << 2,
bf_prev_id = 1 << 3,
bf_miner_tx = 1 << 4,
bf_tx_hashes = 1 << 5,
bf_diffic = 1 << 6,
2016-06-27 11:56:19 -06:00
bf_max_outs = 1 << 7,
bf_hf_version= 1 << 8
2014-03-03 15:07:58 -07:00
};
void get_block_chain(std::vector<block_info>& blockchain, const crypto::hash& head, size_t n) const;
void get_last_n_block_weights(std::vector<size_t>& block_weights, const crypto::hash& head, size_t n) const;
2014-03-03 15:07:58 -07:00
uint64_t get_already_generated_coins(const crypto::hash& blk_id) const;
uint64_t get_already_generated_coins(const cryptonote::block& blk) const;
void add_block(const cryptonote::block& blk, size_t tsx_size, std::vector<size_t>& block_weights, uint64_t already_generated_coins,
2016-06-27 11:56:19 -06:00
uint8_t hf_version = 1);
2014-03-03 15:07:58 -07:00
bool construct_block(cryptonote::block& blk, uint64_t height, const crypto::hash& prev_id,
const cryptonote::account_base& miner_acc, uint64_t timestamp, uint64_t already_generated_coins,
std::vector<size_t>& block_weights, const std::list<cryptonote::transaction>& tx_list);
2014-03-03 15:07:58 -07:00
bool construct_block(cryptonote::block& blk, const cryptonote::account_base& miner_acc, uint64_t timestamp);
bool construct_block(cryptonote::block& blk, const cryptonote::block& blk_prev, const cryptonote::account_base& miner_acc,
const std::list<cryptonote::transaction>& tx_list = std::list<cryptonote::transaction>());
bool construct_block_manually(cryptonote::block& blk, const cryptonote::block& prev_block,
const cryptonote::account_base& miner_acc, int actual_params = bf_none, uint8_t major_ver = 0,
uint8_t minor_ver = 0, uint64_t timestamp = 0, const crypto::hash& prev_id = crypto::hash(),
const cryptonote::difficulty_type& diffic = 1, const cryptonote::transaction& miner_tx = cryptonote::transaction(),
2016-06-27 11:56:19 -06:00
const std::vector<crypto::hash>& tx_hashes = std::vector<crypto::hash>(), size_t txs_sizes = 0, size_t max_outs = 999,
uint8_t hf_version = 1);
2014-03-03 15:07:58 -07:00
bool construct_block_manually_tx(cryptonote::block& blk, const cryptonote::block& prev_block,
const cryptonote::account_base& miner_acc, const std::vector<crypto::hash>& tx_hashes, size_t txs_size);
private:
std::unordered_map<crypto::hash, block_info> m_blocks_info;
};
inline cryptonote::difficulty_type get_test_difficulty() {return 1;}
void fill_nonce(cryptonote::block& blk, const cryptonote::difficulty_type& diffic, uint64_t height);
bool construct_miner_tx_manually(size_t height, uint64_t already_generated_coins,
const cryptonote::account_public_address& miner_address, cryptonote::transaction& tx,
uint64_t fee, cryptonote::keypair* p_txkey = 0);
bool construct_tx_to_key(const std::vector<test_event_entry>& events, cryptonote::transaction& tx,
const cryptonote::block& blk_head, const cryptonote::account_base& from, const cryptonote::account_base& to,
uint64_t amount, uint64_t fee, size_t nmix);
cryptonote::transaction construct_tx_with_fee(std::vector<test_event_entry>& events, const cryptonote::block& blk_head,
const cryptonote::account_base& acc_from, const cryptonote::account_base& acc_to,
uint64_t amount, uint64_t fee);
void get_confirmed_txs(const std::vector<cryptonote::block>& blockchain, const map_hash2tx_t& mtx, map_hash2tx_t& confirmed_txs);
bool find_block_chain(const std::vector<test_event_entry>& events, std::vector<cryptonote::block>& blockchain, map_hash2tx_t& mtx, const crypto::hash& head);
void fill_tx_sources_and_destinations(const std::vector<test_event_entry>& events, const cryptonote::block& blk_head,
const cryptonote::account_base& from, const cryptonote::account_base& to,
uint64_t amount, uint64_t fee, size_t nmix,
std::vector<cryptonote::tx_source_entry>& sources,
std::vector<cryptonote::tx_destination_entry>& destinations);
uint64_t get_balance(const cryptonote::account_base& addr, const std::vector<cryptonote::block>& blockchain, const map_hash2tx_t& mtx);
//--------------------------------------------------------------------------
template<class t_test_class>
auto do_check_tx_verification_context(const cryptonote::tx_verification_context& tvc, bool tx_added, size_t event_index, const cryptonote::transaction& tx, t_test_class& validator, int)
-> decltype(validator.check_tx_verification_context(tvc, tx_added, event_index, tx))
{
return validator.check_tx_verification_context(tvc, tx_added, event_index, tx);
}
//--------------------------------------------------------------------------
template<class t_test_class>
bool do_check_tx_verification_context(const cryptonote::tx_verification_context& tvc, bool tx_added, size_t /*event_index*/, const cryptonote::transaction& /*tx*/, t_test_class&, long)
{
// Default block verification context check
if (tvc.m_verifivation_failed)
throw std::runtime_error("Transaction verification failed");
2014-03-03 15:07:58 -07:00
return true;
}
//--------------------------------------------------------------------------
template<class t_test_class>
bool check_tx_verification_context(const cryptonote::tx_verification_context& tvc, bool tx_added, size_t event_index, const cryptonote::transaction& tx, t_test_class& validator)
{
// SFINAE in action
return do_check_tx_verification_context(tvc, tx_added, event_index, tx, validator, 0);
}
//--------------------------------------------------------------------------
template<class t_test_class>
auto do_check_tx_verification_context(const std::vector<cryptonote::tx_verification_context>& tvcs, size_t tx_added, size_t event_index, const std::vector<cryptonote::transaction>& txs, t_test_class& validator, int)
-> decltype(validator.check_tx_verification_context(tvcs, tx_added, event_index, txs))
{
return validator.check_tx_verification_context(tvcs, tx_added, event_index, txs);
}
//--------------------------------------------------------------------------
template<class t_test_class>
bool do_check_tx_verification_context(const std::vector<cryptonote::tx_verification_context>& tvcs, size_t tx_added, size_t /*event_index*/, const std::vector<cryptonote::transaction>& /*txs*/, t_test_class&, long)
{
// Default block verification context check
for (const cryptonote::tx_verification_context &tvc: tvcs)
if (tvc.m_verifivation_failed)
throw std::runtime_error("Transaction verification failed");
return true;
}
//--------------------------------------------------------------------------
template<class t_test_class>
bool check_tx_verification_context(const std::vector<cryptonote::tx_verification_context>& tvcs, size_t tx_added, size_t event_index, const std::vector<cryptonote::transaction>& txs, t_test_class& validator)
{
// SFINAE in action
return do_check_tx_verification_context(tvcs, tx_added, event_index, txs, validator, 0);
}
//--------------------------------------------------------------------------
template<class t_test_class>
2014-03-03 15:07:58 -07:00
auto do_check_block_verification_context(const cryptonote::block_verification_context& bvc, size_t event_index, const cryptonote::block& blk, t_test_class& validator, int)
-> decltype(validator.check_block_verification_context(bvc, event_index, blk))
{
return validator.check_block_verification_context(bvc, event_index, blk);
}
//--------------------------------------------------------------------------
template<class t_test_class>
bool do_check_block_verification_context(const cryptonote::block_verification_context& bvc, size_t /*event_index*/, const cryptonote::block& /*blk*/, t_test_class&, long)
{
// Default block verification context check
if (bvc.m_verifivation_failed)
throw std::runtime_error("Block verification failed");
2014-03-03 15:07:58 -07:00
return true;
}
//--------------------------------------------------------------------------
template<class t_test_class>
bool check_block_verification_context(const cryptonote::block_verification_context& bvc, size_t event_index, const cryptonote::block& blk, t_test_class& validator)
{
// SFINAE in action
return do_check_block_verification_context(bvc, event_index, blk, validator, 0);
}
/************************************************************************/
/* */
/************************************************************************/
template<class t_test_class>
struct push_core_event_visitor: public boost::static_visitor<bool>
{
private:
cryptonote::core& m_c;
const std::vector<test_event_entry>& m_events;
t_test_class& m_validator;
size_t m_ev_index;
bool m_txs_keeped_by_block;
public:
push_core_event_visitor(cryptonote::core& c, const std::vector<test_event_entry>& events, t_test_class& validator)
: m_c(c)
, m_events(events)
, m_validator(validator)
, m_ev_index(0)
, m_txs_keeped_by_block(false)
{
}
void event_index(size_t ev_index)
{
m_ev_index = ev_index;
}
bool operator()(const event_visitor_settings& settings)
{
log_event("event_visitor_settings");
if (settings.valid_mask & event_visitor_settings::set_txs_keeped_by_block)
{
m_txs_keeped_by_block = settings.txs_keeped_by_block;
}
return true;
}
bool operator()(const cryptonote::transaction& tx) const
{
log_event("cryptonote::transaction");
cryptonote::tx_verification_context tvc = AUTO_VAL_INIT(tvc);
size_t pool_size = m_c.get_pool_transactions_count();
m_c.handle_incoming_tx(t_serializable_object_to_blob(tx), tvc, m_txs_keeped_by_block, false, false);
2014-03-03 15:07:58 -07:00
bool tx_added = pool_size + 1 == m_c.get_pool_transactions_count();
bool r = check_tx_verification_context(tvc, tx_added, m_ev_index, tx, m_validator);
CHECK_AND_NO_ASSERT_MES(r, false, "tx verification context check failed");
return true;
}
bool operator()(const std::vector<cryptonote::transaction>& txs) const
{
log_event("cryptonote::transaction");
std::vector<cryptonote::blobdata> tx_blobs;
std::vector<cryptonote::tx_verification_context> tvcs;
cryptonote::tx_verification_context tvc0 = AUTO_VAL_INIT(tvc0);
for (const auto &tx: txs)
{
tx_blobs.push_back(t_serializable_object_to_blob(tx));
tvcs.push_back(tvc0);
}
size_t pool_size = m_c.get_pool_transactions_count();
m_c.handle_incoming_txs(tx_blobs, tvcs, m_txs_keeped_by_block, false, false);
size_t tx_added = m_c.get_pool_transactions_count() - pool_size;
bool r = check_tx_verification_context(tvcs, tx_added, m_ev_index, txs, m_validator);
CHECK_AND_NO_ASSERT_MES(r, false, "tx verification context check failed");
return true;
}
2014-03-03 15:07:58 -07:00
bool operator()(const cryptonote::block& b) const
{
log_event("cryptonote::block");
cryptonote::block_verification_context bvc = AUTO_VAL_INIT(bvc);
m_c.handle_incoming_block(t_serializable_object_to_blob(b), bvc);
bool r = check_block_verification_context(bvc, m_ev_index, b, m_validator);
CHECK_AND_NO_ASSERT_MES(r, false, "block verification context check failed");
return r;
}
bool operator()(const callback_entry& cb) const
{
log_event(std::string("callback_entry ") + cb.callback_name);
return m_validator.verify(cb.callback_name, m_c, m_ev_index, m_events);
}
bool operator()(const cryptonote::account_base& ab) const
{
log_event("cryptonote::account_base");
return true;
}
bool operator()(const serialized_block& sr_block) const
{
log_event("serialized_block");
cryptonote::block_verification_context bvc = AUTO_VAL_INIT(bvc);
m_c.handle_incoming_block(sr_block.data, bvc);
cryptonote::block blk;
std::stringstream ss;
ss << sr_block.data;
binary_archive<false> ba(ss);
::serialization::serialize(ba, blk);
if (!ss.good())
{
blk = cryptonote::block();
}
bool r = check_block_verification_context(bvc, m_ev_index, blk, m_validator);
CHECK_AND_NO_ASSERT_MES(r, false, "block verification context check failed");
return true;
}
bool operator()(const serialized_transaction& sr_tx) const
{
log_event("serialized_transaction");
cryptonote::tx_verification_context tvc = AUTO_VAL_INIT(tvc);
size_t pool_size = m_c.get_pool_transactions_count();
m_c.handle_incoming_tx(sr_tx.data, tvc, m_txs_keeped_by_block, false, false);
2014-03-03 15:07:58 -07:00
bool tx_added = pool_size + 1 == m_c.get_pool_transactions_count();
cryptonote::transaction tx;
std::stringstream ss;
ss << sr_tx.data;
binary_archive<false> ba(ss);
::serialization::serialize(ba, tx);
if (!ss.good())
{
tx = cryptonote::transaction();
}
bool r = check_tx_verification_context(tvc, tx_added, m_ev_index, tx, m_validator);
CHECK_AND_NO_ASSERT_MES(r, false, "transaction verification context check failed");
return true;
}
private:
void log_event(const std::string& event_type) const
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MGINFO_YELLOW("=== EVENT # " << m_ev_index << ": " << event_type);
2014-03-03 15:07:58 -07:00
}
};
//--------------------------------------------------------------------------
template<class t_test_class>
inline bool replay_events_through_core(cryptonote::core& cr, const std::vector<test_event_entry>& events, t_test_class& validator)
{
TRY_ENTRY();
//init core here
CHECK_AND_ASSERT_MES(typeid(cryptonote::block) == events[0].type(), false, "First event must be genesis block creation");
cr.set_genesis_block(boost::get<cryptonote::block>(events[0]));
bool r = true;
push_core_event_visitor<t_test_class> visitor(cr, events, validator);
for(size_t i = 1; i < events.size() && r; ++i)
{
visitor.event_index(i);
r = boost::apply_visitor(visitor, events[i]);
}
return r;
CATCH_ENTRY_L0("replay_events_through_core", false);
}
//--------------------------------------------------------------------------
2016-04-02 15:00:55 -06:00
template<typename t_test_class>
struct get_test_options {
const std::pair<uint8_t, uint64_t> hard_forks[2];
const cryptonote::test_options test_options = {
hard_forks
};
get_test_options():hard_forks{std::make_pair((uint8_t)1, (uint64_t)0), std::make_pair((uint8_t)0, (uint64_t)0)}{}
};
2016-04-02 15:00:55 -06:00
//--------------------------------------------------------------------------
template<class t_test_class>
2014-03-03 15:07:58 -07:00
inline bool do_replay_events(std::vector<test_event_entry>& events)
{
boost::program_options::options_description desc("Allowed options");
cryptonote::core::init_options(desc);
boost::program_options::variables_map vm;
bool r = command_line::handle_error_helper(desc, [&]()
{
boost::program_options::store(boost::program_options::basic_parsed_options<char>(&desc), vm);
boost::program_options::notify(vm);
return true;
});
if (!r)
return false;
cryptonote::cryptonote_protocol_stub pr; //TODO: stub only for this kind of test, make real validation of relayed objects
cryptonote::core c(&pr);
// FIXME: make sure that vm has arg_testnet_on set to true or false if
// this test needs for it to be so.
get_test_options<t_test_class> gto;
if (!c.init(vm, NULL, &gto.test_options))
2014-03-03 15:07:58 -07:00
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MERROR("Failed to init core");
2014-03-03 15:07:58 -07:00
return false;
}
c.get_blockchain_storage().get_db().set_batch_transactions(true);
// start with a clean pool
std::vector<crypto::hash> pool_txs;
if (!c.get_pool_transaction_hashes(pool_txs))
{
MERROR("Failed to flush txpool");
return false;
}
c.get_blockchain_storage().flush_txes_from_pool(pool_txs);
2014-03-03 15:07:58 -07:00
t_test_class validator;
bool ret = replay_events_through_core<t_test_class>(c, events, validator);
c.deinit();
return ret;
2014-03-03 15:07:58 -07:00
}
//--------------------------------------------------------------------------
template<class t_test_class>
inline bool do_replay_file(const std::string& filename)
{
std::vector<test_event_entry> events;
if (!tools::unserialize_obj_from_file(events, filename))
{
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MERROR("Failed to deserialize data from file: ");
2014-03-03 15:07:58 -07:00
return false;
}
return do_replay_events<t_test_class>(events);
}
//--------------------------------------------------------------------------
#define GENERATE_ACCOUNT(account) \
cryptonote::account_base account; \
account.generate();
#define GENERATE_MULTISIG_ACCOUNT(account, threshold, total) \
CHECK_AND_ASSERT_MES(threshold >= 2 && threshold <= total, false, "Invalid multisig scheme"); \
std::vector<cryptonote::account_base> account(total); \
do \
{ \
for (size_t msidx = 0; msidx < total; ++msidx) \
account[msidx].generate(); \
std::unordered_set<crypto::public_key> all_multisig_keys; \
std::vector<std::vector<crypto::secret_key>> view_keys(total); \
std::vector<std::vector<crypto::public_key>> spend_keys(total); \
for (size_t msidx = 0; msidx < total; ++msidx) \
{ \
for (size_t msidx_inner = 0; msidx_inner < total; ++msidx_inner) \
{ \
if (msidx_inner != msidx) \
{ \
crypto::secret_key vkh = cryptonote::get_multisig_blinded_secret_key(account[msidx_inner].get_keys().m_view_secret_key); \
view_keys[msidx].push_back(vkh); \
crypto::secret_key skh = cryptonote::get_multisig_blinded_secret_key(account[msidx_inner].get_keys().m_spend_secret_key); \
crypto::public_key pskh; \
crypto::secret_key_to_public_key(skh, pskh); \
spend_keys[msidx].push_back(pskh); \
} \
} \
} \
for (size_t msidx = 0; msidx < total; ++msidx) \
{ \
std::vector<crypto::secret_key> multisig_keys; \
crypto::secret_key spend_skey; \
crypto::public_key spend_pkey; \
if (threshold == total) \
cryptonote::generate_multisig_N_N(account[msidx].get_keys(), spend_keys[msidx], multisig_keys, (rct::key&)spend_skey, (rct::key&)spend_pkey); \
else \
cryptonote::generate_multisig_N1_N(account[msidx].get_keys(), spend_keys[msidx], multisig_keys, (rct::key&)spend_skey, (rct::key&)spend_pkey); \
crypto::secret_key view_skey = cryptonote::generate_multisig_view_secret_key(account[msidx].get_keys().m_view_secret_key, view_keys[msidx]); \
account[msidx].make_multisig(view_skey, spend_skey, spend_pkey, multisig_keys); \
for (const auto &k: multisig_keys) \
all_multisig_keys.insert(rct::rct2pk(rct::scalarmultBase(rct::sk2rct(k)))); \
} \
if (threshold < total) \
{ \
std::vector<crypto::public_key> spend_public_keys; \
for (const auto &k: all_multisig_keys) \
spend_public_keys.push_back(k); \
crypto::public_key spend_pkey = cryptonote::generate_multisig_M_N_spend_public_key(spend_public_keys); \
for (size_t msidx = 0; msidx < total; ++msidx) \
account[msidx].finalize_multisig(spend_pkey); \
} \
} while(0)
2014-03-03 15:07:58 -07:00
#define MAKE_ACCOUNT(VEC_EVENTS, account) \
cryptonote::account_base account; \
account.generate(); \
VEC_EVENTS.push_back(account);
#define DO_CALLBACK(VEC_EVENTS, CB_NAME) \
{ \
callback_entry CALLBACK_ENTRY; \
CALLBACK_ENTRY.callback_name = CB_NAME; \
VEC_EVENTS.push_back(CALLBACK_ENTRY); \
}
#define REGISTER_CALLBACK(CB_NAME, CLBACK) \
register_callback(CB_NAME, boost::bind(&CLBACK, this, _1, _2, _3));
#define REGISTER_CALLBACK_METHOD(CLASS, METHOD) \
register_callback(#METHOD, boost::bind(&CLASS::METHOD, this, _1, _2, _3));
#define MAKE_GENESIS_BLOCK(VEC_EVENTS, BLK_NAME, MINER_ACC, TS) \
test_generator generator; \
cryptonote::block BLK_NAME; \
generator.construct_block(BLK_NAME, MINER_ACC, TS); \
VEC_EVENTS.push_back(BLK_NAME);
#define MAKE_NEXT_BLOCK(VEC_EVENTS, BLK_NAME, PREV_BLOCK, MINER_ACC) \
cryptonote::block BLK_NAME; \
generator.construct_block(BLK_NAME, PREV_BLOCK, MINER_ACC); \
VEC_EVENTS.push_back(BLK_NAME);
#define MAKE_NEXT_BLOCK_TX1(VEC_EVENTS, BLK_NAME, PREV_BLOCK, MINER_ACC, TX1) \
cryptonote::block BLK_NAME; \
{ \
std::list<cryptonote::transaction> tx_list; \
tx_list.push_back(TX1); \
generator.construct_block(BLK_NAME, PREV_BLOCK, MINER_ACC, tx_list); \
} \
VEC_EVENTS.push_back(BLK_NAME);
#define MAKE_NEXT_BLOCK_TX_LIST(VEC_EVENTS, BLK_NAME, PREV_BLOCK, MINER_ACC, TXLIST) \
cryptonote::block BLK_NAME; \
generator.construct_block(BLK_NAME, PREV_BLOCK, MINER_ACC, TXLIST); \
VEC_EVENTS.push_back(BLK_NAME);
#define REWIND_BLOCKS_N(VEC_EVENTS, BLK_NAME, PREV_BLOCK, MINER_ACC, COUNT) \
cryptonote::block BLK_NAME; \
{ \
cryptonote::block blk_last = PREV_BLOCK; \
for (size_t i = 0; i < COUNT; ++i) \
{ \
MAKE_NEXT_BLOCK(VEC_EVENTS, blk, blk_last, MINER_ACC); \
blk_last = blk; \
} \
BLK_NAME = blk_last; \
}
#define REWIND_BLOCKS(VEC_EVENTS, BLK_NAME, PREV_BLOCK, MINER_ACC) REWIND_BLOCKS_N(VEC_EVENTS, BLK_NAME, PREV_BLOCK, MINER_ACC, CRYPTONOTE_MINED_MONEY_UNLOCK_WINDOW)
#define MAKE_TX_MIX(VEC_EVENTS, TX_NAME, FROM, TO, AMOUNT, NMIX, HEAD) \
cryptonote::transaction TX_NAME; \
construct_tx_to_key(VEC_EVENTS, TX_NAME, HEAD, FROM, TO, AMOUNT, TESTS_DEFAULT_FEE, NMIX); \
VEC_EVENTS.push_back(TX_NAME);
#define MAKE_TX(VEC_EVENTS, TX_NAME, FROM, TO, AMOUNT, HEAD) MAKE_TX_MIX(VEC_EVENTS, TX_NAME, FROM, TO, AMOUNT, 0, HEAD)
#define MAKE_TX_MIX_LIST(VEC_EVENTS, SET_NAME, FROM, TO, AMOUNT, NMIX, HEAD) \
{ \
cryptonote::transaction t; \
construct_tx_to_key(VEC_EVENTS, t, HEAD, FROM, TO, AMOUNT, TESTS_DEFAULT_FEE, NMIX); \
SET_NAME.push_back(t); \
VEC_EVENTS.push_back(t); \
}
#define MAKE_TX_LIST(VEC_EVENTS, SET_NAME, FROM, TO, AMOUNT, HEAD) MAKE_TX_MIX_LIST(VEC_EVENTS, SET_NAME, FROM, TO, AMOUNT, 0, HEAD)
#define MAKE_TX_LIST_START(VEC_EVENTS, SET_NAME, FROM, TO, AMOUNT, HEAD) \
std::list<cryptonote::transaction> SET_NAME; \
MAKE_TX_LIST(VEC_EVENTS, SET_NAME, FROM, TO, AMOUNT, HEAD);
#define MAKE_MINER_TX_AND_KEY_MANUALLY(TX, BLK, KEY) \
transaction TX; \
if (!construct_miner_tx_manually(get_block_height(BLK) + 1, generator.get_already_generated_coins(BLK), \
miner_account.get_keys().m_account_address, TX, 0, KEY)) \
return false;
#define MAKE_MINER_TX_MANUALLY(TX, BLK) MAKE_MINER_TX_AND_KEY_MANUALLY(TX, BLK, 0)
#define SET_EVENT_VISITOR_SETT(VEC_EVENTS, SETT, VAL) VEC_EVENTS.push_back(event_visitor_settings(SETT, VAL));
#define GENERATE(filename, genclass) \
{ \
std::vector<test_event_entry> events; \
genclass g; \
g.generate(events); \
if (!tools::serialize_obj_to_file(events, filename)) \
{ \
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MERROR("Failed to serialize data to file: " << filename); \
throw std::runtime_error("Failed to serialize data to file"); \
2014-03-03 15:07:58 -07:00
} \
}
#define PLAY(filename, genclass) \
if(!do_replay_file<genclass>(filename)) \
{ \
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MERROR("Failed to pass test : " << #genclass); \
2014-03-03 15:07:58 -07:00
return 1; \
}
#define GENERATE_AND_PLAY(genclass) \
if (filter.empty() || boost::regex_match(std::string(#genclass), match, boost::regex(filter))) \
2014-03-03 15:07:58 -07:00
{ \
std::vector<test_event_entry> events; \
++tests_count; \
bool generated = false; \
try \
{ \
genclass g; \
generated = g.generate(events);; \
} \
catch (const std::exception& ex) \
{ \
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MERROR(#genclass << " generation failed: what=" << ex.what()); \
2014-03-03 15:07:58 -07:00
} \
catch (...) \
{ \
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MERROR(#genclass << " generation failed: generic exception"); \
2014-03-03 15:07:58 -07:00
} \
if (generated && do_replay_events< genclass >(events)) \
{ \
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MGINFO_GREEN("#TEST# Succeeded " << #genclass); \
2014-03-03 15:07:58 -07:00
} \
else \
{ \
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MERROR("#TEST# Failed " << #genclass); \
2014-03-03 15:07:58 -07:00
failed_tests.push_back(#genclass); \
} \
}
#define CALL_TEST(test_name, function) \
{ \
if(!function()) \
{ \
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MERROR("#TEST# Failed " << test_name); \
2014-03-03 15:07:58 -07:00
return 1; \
} \
else \
{ \
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 09:34:23 -07:00
MGINFO_GREEN("#TEST# Succeeded " << test_name); \
2014-03-03 15:07:58 -07:00
} \
}
#define QUOTEME(x) #x
#define DEFINE_TESTS_ERROR_CONTEXT(text) const char* perr_context = text;
#define CHECK_TEST_CONDITION(cond) CHECK_AND_ASSERT_MES(cond, false, "[" << perr_context << "] failed: \"" << QUOTEME(cond) << "\"")
#define CHECK_EQ(v1, v2) CHECK_AND_ASSERT_MES(v1 == v2, false, "[" << perr_context << "] failed: \"" << QUOTEME(v1) << " == " << QUOTEME(v2) << "\", " << v1 << " != " << v2)
#define CHECK_NOT_EQ(v1, v2) CHECK_AND_ASSERT_MES(!(v1 == v2), false, "[" << perr_context << "] failed: \"" << QUOTEME(v1) << " != " << QUOTEME(v2) << "\", " << v1 << " == " << v2)
#define MK_COINS(amount) (UINT64_C(amount) * COIN)
#define TESTS_DEFAULT_FEE ((uint64_t)20000000000) // 2 * pow(10, 10)