Update Raspberry Pi build instructions

We don't have to compile boost by ourselves anymore!
This commit is contained in:
Mike C 2017-09-20 16:56:20 -06:00 committed by GitHub
parent a6403846ef
commit 7cdb343184
1 changed files with 9 additions and 19 deletions

View File

@ -209,13 +209,13 @@ invokes cmake commands as needed.
HAVE_DOT=YES doxygen Doxyfile HAVE_DOT=YES doxygen Doxyfile
#### On the Raspberry Pi 2 #### On the Raspberry Pi
Tested on a Raspberry Pi 2 with a clean install of minimal Debian Jessie from https://www.raspberrypi.org/downloads/raspbian/ Tested on a Raspberry Pi Zero with a clean install of minimal Debian Stretch (2017-09-07 or later) from https://www.raspberrypi.org/downloads/raspbian/
* `apt-get update && apt-get upgrade` to install all of the latest software * `apt-get update && apt-get upgrade` to install all of the latest software
* Install the dependencies for Monero except libunwind and libboost-all-dev * Install the dependencies for Monero from the 'Debian' column in the table above.
* Increase the system swap size: * Increase the system swap size:
``` ```
@ -224,27 +224,17 @@ Tested on a Raspberry Pi 2 with a clean install of minimal Debian Jessie from ht
CONF_SWAPSIZE=1024 CONF_SWAPSIZE=1024
sudo /etc/init.d/dphys-swapfile start sudo /etc/init.d/dphys-swapfile start
``` ```
* Install the latest version of boost (this may first require invoking `apt-get remove --purge libboost*` to remove a previous version if you're not using a clean install): * Clone monero and checkout most recent release version:
```
cd
wget https://sourceforge.net/projects/boost/files/boost/1.64.0/boost_1_64_0.tar.bz2
tar xvfo boost_1_64_0.tar.bz2
cd boost_1_64_0
./bootstrap.sh
sudo ./b2
```
* Wait ~8 hours
```
sudo ./bjam install
```
* Wait ~4 hours
* Change to the root of the source code directory and build:
``` ```
git clone https://github.com/monero-project/monero.git
cd monero cd monero
git checkout tags/v0.11.0.0
```
* Build:
```
make release make release
``` ```
* Wait ~4 hours * Wait 4-6 hours
* The resulting executables can be found in `build/release/bin` * The resulting executables can be found in `build/release/bin`