Commit Graph

28 Commits

Author SHA1 Message Date
Howard Chu a4ebec9afb
Add python method 2021-11-21 01:24:10 +00:00
SChernykh dfee15eee1 RPC and ZeroMQ APIs to support p2pool
Adds the following:

- "get_miner_data" to RPC API
- "json-miner-data" to ZeroMQ subscriber contexts

Both provide the necessary data to create a custom block template. They are used by p2pool.

Data provided:

- major fork version
- current height
- previous block id
- RandomX seed hash
- network difficulty
- median block weight
- coins mined by the network so far
- mineable mempool transactions
2021-09-11 15:15:07 +02:00
moneromooo-monero 19b228393f
New add_aux_pow RPC to support merge mining 2021-02-09 11:58:21 +00:00
Alexander Blair 6b2d3deb20
Merge pull request #6662
e33428012 python-rpc: fix bad in_peers parameter (moneromooo-monero)
2020-08-16 12:45:56 -07:00
moneromooo-monero e334280127
python-rpc: fix bad in_peers parameter 2020-06-17 14:34:16 +00:00
moneromooo-monero c6dc2850c2
python-rpc: add missing sync_txpool python entry point 2020-05-27 13:11:00 +00:00
Lee Clagett babf25d2ec Allow unrestricted rpc calls to get full txpool info 2020-03-30 17:52:42 +00:00
moneromooo-monero da2ffd6abe
python-rpc: add missing daemon RPC 2019-10-25 23:10:35 +00:00
moneromooo-monero a4dc575ccb
rpc: add a flush_cache RPC
This allows flushing internal caches (for now, the bad tx cache,
which will allow debugging a stuck monerod after it has failed to
verify a transaction in a block, since it would otherwise not try
again, making subsequent log changes pointless)
2019-10-25 18:41:54 +00:00
moneromooo-monero 2899379791
daemon, wallet: new pay for RPC use system
Daemons intended for public use can be set up to require payment
in the form of hashes in exchange for RPC service. This enables
public daemons to receive payment for their work over a large
number of calls. This system behaves similarly to a pool, so
payment takes the form of valid blocks every so often, yielding
a large one off payment, rather than constant micropayments.

This system can also be used by third parties as a "paywall"
layer, where users of a service can pay for use by mining Monero
to the service provider's address. An example of this for web
site access is Primo, a Monero mining based website "paywall":
https://github.com/selene-kovri/primo

This has some advantages:
 - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own
 - incentive to run your own node instead of using a third party's, thereby promoting decentralization
 - decentralized: payment is done between a client and server, with no third party needed
 - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance
 - no payment occurs on the blockchain, so there is no extra transactional load
 - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy)
 - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do
 - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue
 - no large credit balance maintained on servers, so they have no incentive to exit scam
 - you can use any/many node(s), since there's little cost in switching servers
 - market based prices: competition between servers to lower costs
 - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others
 - increases network security
 - helps counteract mining pools' share of the network hash rate
 - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner

And some disadvantages:
 - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine)
 - payment is "random", so a server might go a long time without a block before getting one
 - a public node's overall expected payment may be small

Public nodes are expected to compete to find a suitable level for
cost of service.

The daemon can be set up this way to require payment for RPC services:

  monerod --rpc-payment-address 4xxxxxx \
    --rpc-payment-credits 250 --rpc-payment-difficulty 1000

These values are an example only.

The --rpc-payment-difficulty switch selects how hard each "share" should
be, similar to a mining pool. The higher the difficulty, the fewer
shares a client will find.
The --rpc-payment-credits switch selects how many credits are awarded
for each share a client finds.
Considering both options, clients will be awarded credits/difficulty
credits for every hash they calculate. For example, in the command line
above, 0.25 credits per hash. A client mining at 100 H/s will therefore
get an average of 25 credits per second.
For reference, in the current implementation, a credit is enough to
sync 20 blocks, so a 100 H/s client that's just starting to use Monero
and uses this daemon will be able to sync 500 blocks per second.

The wallet can be set to automatically mine if connected to a daemon
which requires payment for RPC usage. It will try to keep a balance
of 50000 credits, stopping mining when it's at this level, and starting
again as credits are spent. With the example above, a new client will
mine this much credits in about half an hour, and this target is enough
to sync 500000 blocks (currently about a third of the monero blockchain).

There are three new settings in the wallet:

 - credits-target: this is the amount of credits a wallet will try to
reach before stopping mining. The default of 0 means 50000 credits.

 - auto-mine-for-rpc-payment-threshold: this controls the minimum
credit rate which the wallet considers worth mining for. If the
daemon credits less than this ratio, the wallet will consider mining
to be not worth it. In the example above, the rate is 0.25

 - persistent-rpc-client-id: if set, this allows the wallet to reuse
a client id across runs. This means a public node can tell a wallet
that's connecting is the same as one that connected previously, but
allows a wallet to keep their credit balance from one run to the
other. Since the wallet only mines to keep a small credit balance,
this is not normally worth doing. However, someone may want to mine
on a fast server, and use that credit balance on a low power device
such as a phone. If left unset, a new client ID is generated at
each wallet start, for privacy reasons.

To mine and use a credit balance on two different devices, you can
use the --rpc-client-secret-key switch. A wallet's client secret key
can be found using the new rpc_payments command in the wallet.
Note: anyone knowing your RPC client secret key is able to use your
credit balance.

The wallet has a few new commands too:

 - start_mining_for_rpc: start mining to acquire more credits,
regardless of the auto mining settings
 - stop_mining_for_rpc: stop mining to acquire more credits
 - rpc_payments: display information about current credits with
the currently selected daemon

The node has an extra command:

 - rpc_payments: display information about clients and their
balances

The node will forget about any balance for clients which have
been inactive for 6 months. Balances carry over on node restart.
2019-10-25 09:34:38 +00:00
moneromooo-monero e037ecb014
functional_tests: check for RPC methods which aren't exposed 2019-09-17 11:38:30 +00:00
moneromooo-monero d53a55204f
functional_tests: add get_transaction_pool_stats
Also fix part of the RPC results being returned as binary.
This makes the RPC backward incompatible.
2019-09-17 11:38:29 +00:00
moneromooo-monero 51bd45c352
functional_tests: add save_bc 2019-09-17 11:38:28 +00:00
moneromooo-monero 230f73e121
functional_tests: add is_key_image_spent tests 2019-09-17 11:38:28 +00:00
luigi1111 50c8147568
Merge pull request #5490
1a93aa4 functional_tests: add get_fee_estimate to blockchain test (moneromooo-monero)
2019-08-17 15:20:15 -05:00
luigi1111 564bb1da3a
Merge pull request #5525
0605406 daemon: sort alt chains by height (moneromooo-monero)
4228ee0  daemon: add optional arguments to alt_chain_info (moneromooo-monero)
880ebfd daemon: add more chain specific info in alt_chain_info (moneromooo-monero)
2019-08-14 15:31:52 -05:00
moneromooo-monero 880ebfdeea
daemon: add more chain specific info in alt_chain_info 2019-06-01 15:43:52 +00:00
moneromooo-monero ddf7890730
python-rpc: add missing getblock RPC parameters 2019-05-09 11:48:54 +00:00
moneromooo-monero 1a93aa4b79
functional_tests: add get_fee_estimate to blockchain test 2019-04-24 13:27:35 +00:00
moneromooo-monero ccb996afc6
rpc: new sanity check on relayed transactions
This will weed out some transactions with silly rings
2019-04-12 20:22:09 +00:00
moneromooo-monero 047af5c343
console.py: can now connect to several daemons/wallets
Also throw exceptions instead of print+exit, since that makes
the error print last, below the python stack trace, where it's
much less easy to miss it.
2019-04-11 11:08:33 +00:00
moneromooo-monero 7c657bb2dd
functional_tests: add alt chains tests 2019-04-11 11:08:15 +00:00
moneromooo-monero 23f86dad02
python-rpc: add set_log_level and set_log_categories 2019-04-11 11:08:06 +00:00
moneromooo-monero 064ab12340
functional_tests: add more blockchain related tests
Related to emission, reorgs, getting tx data back, output
distribution and histogram
2019-04-11 11:07:58 +00:00
moneromooo-monero 21b1ac1dd2
functional_tests: add bans tests 2019-04-11 11:07:55 +00:00
moneromooo-monero 32973434bd
python-rpc: add getblockheadersrange daemon RPC 2019-03-23 18:59:49 +00:00
moneromooo-monero c7bfdc3566
python-rpc: add console.py
It allows one to connect to a running daemon or wallet, and use
its RPC API from python.

Usage: python -i console.py <port>

It will detect whether it's talking to a daemon or wallet and
initialize itself accordingly.
2019-03-23 18:59:47 +00:00
moneromooo-monero 22b644f47e
functional_tests: move RPC API to utils, it is not test specific 2019-03-22 15:29:44 +00:00