With RCT, we allow 0 size outputs, to try and encourage txes
with two inputs and two outputs. Consolidation would then
have two non zero inputs, one zero output, and one larger
output.
Before the normal selection, we attempt to find either one or two
suitable outputs to use as inputs to the rct tx. The intent is that
most rct txes will have one or two inputs, and we want all to look
the same if possible.
When two outputs are needed, we try to find a pair which are not
related (ie, by being from the same or similar block height).
The "transfer" simplewallet command is renamed to "transfer_original".
"transfer_new" is renamed "transfer", "transfer_rct" is removed,
and the new "transfer" now selects rct or non rct transactions
based on the current block height.
Since these are needed at the same time as the output pubkeys,
this is a whole lot faster, and takes less space. Only outputs
of 0 amount store the commitment. When reading other outputs,
a fake commitment is regenerated on the fly. This avoids having
to rewrite the database to add space for fake commitments for
existing outputs.
This code relies on two things:
- LMDB must support fixed size records per key, rather than
per database (ie, all records on key 0 are the same size, all
records for non 0 keys are same size, but records from key 0
and non 0 keys do have different sizes).
- the commitment must be directly after the rest of the data
in outkey and output_data_t.
The mixRing (output keys and commitments) and II fields (key images)
can be reconstructed from vin data.
This saves some modest amount of space in the tx.
If the blockchain gets reorganized, all outputs spent in the part
of the blockchain that's blown away need to be reset to unspent
(they may end up spent again on the blocks that replace the blocks
that are removed, however).
It may be suboptimal, but it's a pain to have to rebuild everything
when some of this changes.
Also, no clue why there seems to be two different code paths for
serializing a tx...
A new version of genRct takes the mixRing as parameter, instead
of the inPk. inPk are part of the mixRing, and it is cleaner to
pass the mixRing data than to fetch it from the RingCT code.
A new version of decodeRct also returns the mask.
Also, failure to decode throws, so errors are properly detected.
This lets my gcc picks those instead of the generic template
where appropriate (and then fail since std::vector<something>
does not have a serialize method.
99dd572 libwallet_api: tests: checking for result while opening wallet (Ilya Kitaev)
bcf7b67 libwallet_api: Wallet::amountFromString fixed (Ilya Kitaev)
32bc7b4 libwallet_api: helper method to return maximumAllowedAmount (Ilya Kitaev)
cbe534d libwallet_api: tests: removed logged passwords (Ilya Kitaev)
b1a5a93 libwallet_api: do not store wallet on close if status is not ok (Ilya Kitaev)
This plugs a privacy leak from the wallet to the daemon,
as the daemon could previously see what input is included
as a transaction input, which the daemon hadn't previously
supplied. Now, the wallet requests a particular set of
outputs, including the real one.
This can result in transactions that can't be accepted if
the wallet happens to select too many outputs with non standard
unlock times. The daemon could know this and select another
output, but the wallet is blind to it. It's currently very
unlikely since I don't think anything uses non default
unlock times. The wallet requests more outputs than necessary
so it can use spares if any of the returns outputs are still
locked. If there are not enough spares to reach the desired
mixin, the transaction will fail.
f0c0a3fFix#864 Squashed commit of the following: commit 9af9e4223b58bbb65a3519af2c2bfc273cbd23d6 fixed some formatting commit c7920e1cf88ff46eb9294101344d9a567f22e2da Merge: 97eb28b 1da1c68 fix#864 fix using boolean commit 97eb28ba5dd49ddde8c8785f39b24d955e5de31c Fix#864 boolean value used to verify on new wallet commit 1da1c68bd3a9a373c70482b6e6e95251096149f1 fix#864 changed to boolean to prompt for verify commit 5bee96652434762d2c91ce31a1b1c9f169446ddc fix 864; made variable names easier for understanding branching. commit 45715960d30293f781b2ff9e5e647c2ec893f4a3 fix#864; allow password to be entered twice for new wallets for verification. fix#864 password entry verification; ammended boolean fix#864 ; default constructor for password_container should set verify=true (guzzi_jones)
Simplewallet improperly skipped the restore from height code if
restoring a deterministic wallet AND not specifying a wallet file in the
command line. The other generate options require a wallet file as an
argument, which prevents "ask_wallet_create_if_needed()" from being
called, which in turn causes "m_generate_new" to remain unset.
Specifying a wallet file at launch with --restore-deterministic emulated
this behavior.
This constrains the number of instances of any amount
to the unlocked ones (as defined by the default unlock time
setting: outputs with non default unlock time are not
considered, so may be counted as unlocked even if they are
not actually unlocked).
Squashed commit of the following:
commit 9af9e4223b58bbb65a3519af2c2bfc273cbd23d6
fixed some formatting
commit c7920e1cf88ff46eb9294101344d9a567f22e2da
Merge: 97eb28b 1da1c68
fix#864 fix using boolean
commit 97eb28ba5dd49ddde8c8785f39b24d955e5de31c
Fix#864 boolean value used to verify on new wallet
commit 1da1c68bd3a9a373c70482b6e6e95251096149f1
fix#864 changed to boolean to prompt for verify
commit 5bee96652434762d2c91ce31a1b1c9f169446ddc
fix 864; made variable names easier for understanding branching.
commit 45715960d30293f781b2ff9e5e647c2ec893f4a3
fix#864; allow password to be entered twice for new wallets for verification.
fix#864 password entry verification; ammended boolean
fix#864 ; default constructor for password_container should set verify=true
The previous logic that used a COMMON_*_FLAGS intermediate variable
and then re-assigned CMAKE_*_FLAGS before including each subdirectory
was confusing and ugly. This PR is the right way to do it.
This commit is purely refactoring: built binaries unchanged.
By default the flag is enabled whenever libunwind is found on the
system, with the exception of static build on OSX (for which we can't
install the throw hook #932 due to lack of support for --wrap in OSX
ld64 linker).
They are used to export a signed set of key images from a wallet
with a private spend key, so an auditor with the matching view key
may see which of those are spent, and which are not.
It is not clear why libunbound was added to this in the first place,
since it wasn't here before and #915 doesn't seem to introduce any
new dependency on it.
Tested build with STATIC=OFF (with and without libunbound-dev libunbound8
installed) and STATIC=ON, on Ubuntu Trusty, Debian Jessie, and Arch
Linux. For static builds, beware of #926 and #907.
If this hack was introduced to make it build on some other system
(Windows? OS X?), then it will have to be dealt with, but not this way.
f07f120 cmake: don't try to link with atomic on Apple (redfish)
19349d7 cmake: ARM: clang: make warning non-fatal: inline asm (redfish)
f3e09f3 cmake: link with -latomic for clang (redfish)
f4b35ae cmake: include -ldl via cmake built-in var (redfish)
fa85cd8 common: stack trace: make clang happy with func ptrs (redfish)
4dce26b cmake: do not pass -stdlib=c++ to clang >=3.7 (redfish)
78cc10f daemon: fix ban seconds being misinterpreted as absolute (moneromooo-monero)
34ecfdb rpc: fix get_bans and set_bans RPC names, they were missing a _ (moneromooo-monero)
Signing is done using the spend key, since the view key may
be shared. This could be extended later, to let the user choose
which key (even a per tx key).
simplewallet's sign/verify API uses a file. The RPC uses a
string (simplewallet can't easily do strings since commands
receive a tokenized set of arguments).
Tested that it builds with:
gcc 6.1.1, STATIC=OFF,i686
gcc 6.1.1, STATIC=OFF,armv7h
clang 3.8, STATIC=OFF,i686
clang 3.8, STATIC=OFF,armv7h
gcc 6.1.1, STATIC=ON,i686
clang 3.8, STATIC=ON,i686
Also tested that stack trace is generated fine on exception on:
i686, gcc 6.1.1, STATIC=OFF
(didn't bother testing all the other platforms/configs)
This should fix the build problem on OSX (#871, #901), but
I don't have OSX, so I could only test Clang on Linux.
Keep the working directory (and umask) inherited from
the parent. Otherwise, it's impossible to control
the working directory of the daemon (from systemd, for
example).
Furthermoer, bitmonerod attempts to create logging directories and files
*in current working directory*. This fails due to permission denied and
generates a (caught, nonfatal) exception. Below is the strace with this
patch applied (so, no `chdir("/")`), showing successful opens at `log/`
relative path. Without this patch they fail (sorry, didn't save the
trace).
```
28911 getcwd("/.../bitmonero", 128) = 25
28911 stat64("/var/lib/bitmonero/.bitmonero", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
28911 stat64("/etc/bitmonerod.conf", {st_mode=S_IFREG|0644, st_size=244, ...}) = 0
28911 open("/etc/bitmonerod.conf", O_RDONLY|O_LARGEFILE) = 3
28911 open("/var/log/bitmonero/bitmonero.log", O_WRONLY|O_CREAT|O_APPEND|O_LARGEFILE, 0666) = 3
28911 stat64("log", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
28911 stat64("log/dbg", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0
28911 open("log/dbg/main.log", O_WRONLY|O_CREAT|O_TRUNC|O_LARGEFILE, 0666) = 4
```
The reasoning of chdir("/") in order to prevent the daemon from holding
a filesystem in busy state is not compelling at all: the choice of
working directory for the daemon is the user's business not the
daemon's.
When an exception happens while reading the config file, we need
to print the error, as the logging system isn't initialized yet,
so the generic catch will not print anything.
moneromooo-monero