Monero::AddressBookImpl Invalid destination address अवैध गंतव्य पता Payment ID supplied: this is obsolete Monero::PendingTransactionImpl Attempting to save transaction to file, but specified file(s) exist. Exiting to not risk overwriting. File: लेनदेन को फ़ाइल सहेजने की कोशिश कर रहा है, लेकिन फ़ाइल(लें) पहले से मौजूद। अधिलेखन के जोखिम की वजह से बाहर निकला। फ़ाइल: Failed to write transaction(s) to file फ़ाइल में लेनदेन लिखने में विफल daemon is busy. Please try again later. कार्यकर्ता व्यस्त है। बाद में पुन: प्रयास करें। no connection to daemon. Please make sure daemon is running. कार्यकर्ता से कोई संपर्क नहीं। कृपया सुनिश्चित करें कि कार्यकर्ता चल रहा है। transaction %s was rejected by daemon with status: लेन-देन %s को कार्यकर्ता द्वारा अस्वीकार कर दिया गया, स्थिति: . Reason: कारण: Unknown exception: अज्ञात अपवाद: Unhandled exception अनियंत्रित अपवाद Couldn't multisig sign data: साइन डेटा को मल्टीसिग नहीं कर सका: Couldn't sign multisig transaction: मल्टीसिग लेनदेन पर हस्ताक्षर नहीं कर सकते: Monero::UnsignedTransactionImpl This is a watch only wallet यह वॉलेट केवल देख सकते हैं Failed to sign transaction लेन-देन पर हस्ताक्षर करने में विफल Claimed change does not go to a paid address दावा किया गया परिवर्तन भुगतान किए गए पते पर नहीं जा सका Claimed change is larger than payment to the change address दावा किया गया परिवर्तन परिवर्तन पते के भुगतान से बड़ा है Change goes to more than one address परिवर्तन एक से अधिक पते पर जाता है sending %s to %s %s को %s पर भेज रहा है with no destinations कोई गंतव्य नहीं है %s change to %s %s बदलकर %s करें no change कोई परिवर्तन नहीं Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu. %s लेन-देन %lu लोड, %s के लिए, शुल्क %s, %s,%s, न्यूनतम रिंग आकार %lu के साथ। %s Monero::WalletImpl daemon is busy. Please try again later. कार्यकर्ता व्यस्त है। बाद में पुन: प्रयास करें। no connection to daemon. Please make sure daemon is running. कार्यकर्ता से कोई कनेक्शन नहीं। कृपया सुनिश्चित करें कि कार्यकर्ता चल रहा है। RPC error: RPC त्रुटि: failed to get outputs to mix: %s आउटपुट को मिश्रण करने में विफल: %s not enough outputs for specified ring size निर्दिष्ट रिंग आकार के लिए पर्याप्त आउटपुट नहीं है found outputs to use उपयोग करने के लिए आउटपुट मिले Please sweep unmixable outputs. गैर मिश्रण योग्य उत्पाद को बदलें not enough money to transfer, available only %s, sent amount %s हस्तांतरण के लिए पर्याप्त धनराशि नहीं, उपलब्ध राशि %s, केवल %s भेजे failed to parse address पते की व्याख्या करने में विफल failed to parse secret spend key गुप्त खर्च कुंजी की व्याख्या करने में विफल Neither view key nor spend key supplied, cancelled न तो दर्शन कुंजी और न ही खर्च कुंजी की आपूर्ति की गई, खर्च रद्द किया failed to parse secret view key गुप्त दर्शन कुंजी की व्याख्या करने में विफल failed to verify secret spend key गुप्त खर्च कुंजी की पुष्टि करने में विफल spend key does not match address खर्च की कुंजी पते से मेल नहीं खाती failed to verify secret view key गुप्त दर्शन कुंजी की पुष्टि करने में विफल view key does not match address दर्शन की कुंजी पते से मेल नहीं खाती failed to generate new wallet: नया बटुआ उत्पन्न करने में विफल: Electrum seed is empty एलेक्ट्रम बीज खाली है Electrum-style word list failed verification एलेक्ट्रम-शैली शब्द सूची सत्यापन विफल Failed to send import wallet request वॉलेट आयात अनुरोध भेजने में विफल Failed to load unsigned transactions अहस्ताक्षरित लेनदेन लोड करने में विफल Failed to load transaction from file लेनदेन को फ़ाइल से लोड करने में विफल Wallet is view only बटुआ केवल दर्शनीय योग्य है failed to save file फ़ाइल सहेजने में विफल Key images can only be imported with a trusted daemon मुख्य छवियों को केवल एक विश्वसनीय कार्यकर्ता के माध्यम से आयात किया जा सकता है Failed to import key images: मुख्य छवि आयात करने में विफल: Failed to get subaddress label: उप-पता नामांकन प्राप्त करने में विफल: Failed to set subaddress label: उप पता नामांकन लगाने में विफल: Failed to get multisig info: मल्टीसिग जानकारी प्राप्त करने में विफल: Failed to make multisig: मल्टीसिग बनाने में विफल: Failed to finalize multisig wallet creation मल्टीसिग वॉलेट निर्माण को अंतिम रूप देने में विफल Failed to finalize multisig wallet creation: मल्टीसिग वॉलेट निर्माण को अंतिम रूप देने में विफल: Failed to export multisig images: मल्टीसिग छवियों को निर्यात करने में विफल: Failed to parse imported multisig images आयातित मल्टीसिग छवियों की व्याख्या करने में विफल Failed to import multisig images: मल्टीसिग छवियों को आयात करने में विफल: Failed to check for partial multisig key images: आंशिक मल्टीसिग कुंजी छवियों की जांच करने में विफल: Failed to restore multisig transaction: मल्टीसिग लेनदेन को बहाल करने में विफल: Sending all requires one destination address Destinations and amounts are unequal payment id has invalid format, expected 64 character hex string: Invalid destination address गन्तव्य पता अवैध a single transaction cannot use more than one payment id failed to set up payment id, though it was decoded correctly Invalid output: अवैध उत्पाद: Failed to mark outputs as spent उत्पादों को बतौर खर्च चिह्नित करने में विफल Failed to mark output as spent उत्पाद को बतौर खर्च चिह्नित करने में विफल Failed to mark output as unspent उत्पाद को बतौर अव्ययित चिह्नित करने में विफल not enough money to transfer, overall balance only %s, sent amount %s हस्तांतरण के लिए पर्याप्त धन नहीं, कुल मिलाकर केवल %s, भेजी गयी राशि %s not enough money to transfer, available only %s, transaction amount %s = %s + %s (fee) हस्तांतरण के लिए पर्याप्त धन नहीं, कुल मिलाकर केवल %s, लेनदेन राशि %s = %s + %s (शुल्क) output amount उत्पादित राशि transaction was not constructed लेन-देन का निर्माण नहीं किया गया था transaction %s was rejected by daemon with status: लेन-देन %s को कार्यकर्ता द्वारा अस्वीकार कर दिया गया, स्थिति: one of destinations is zero एक गंतव्य शून्य है failed to find a suitable way to split transactions लेनदेन को विभाजित करने का एक उपयुक्त तरीका खोजने में विफल रहा unknown transfer error: अनजान स्थानांतरण त्रुटि: internal error: आंतरिक त्रुटि: unexpected error: अप्रत्याशित त्रुटि: unknown error अनजान त्रुटि failed to get outputs to mix मिश्रण करने के लिए उत्पाद पाने में विफल Failed to parse txid Txid की व्याख्या करने में विफल no tx keys found for this txid इस txid के लिए कोई tx कुंजियाँ नहीं मिलीं Failed to parse tx key Tx कुंजी की व्याख्या करने में विफल Failed to parse address पते की व्याख्या करने में विफल Address must not be a subaddress पता एक उप-पता नहीं होना चाहिए The wallet must be in multisig ready state वॉलेट मल्टीसिग तैयार अवस्था में होना चाहिए Given string is not a key दिया गया स्ट्रिंग एक कुंजी नहीं है Rescan spent can only be used with a trusted daemon खर्च का पुनः आंकलन केवल एक विश्वसनीय कार्यकर्ता के साथ किया जा सकता है Failed to parse output amount उत्पादित राशि की व्याख्या करने में विफल Failed to parse output offset उत्पादित ओफ़्सेट की व्याख्या करने में विफल Failed to parse key image मुख्य छवि की व्याख्या करने में विफल Failed to get ring रिंग पाने में विफल Failed to get rings रिंग्स पाने में विफल Failed to set ring रिंग निर्धारित करने में विफल Wallet Failed to parse address पते की व्याख्या करने में विफल Failed to parse key कुंजी व्याख्या करने में विफल failed to verify key कुंजी सत्यापित करने में विफल key does not match address कुंजी पते से मेल नहीं खाती command_line yes हाँ no नहीं cryptonote::rpc_args Specify IP to bind RPC server RPC सर्वर को बाँधने के लिए IP निर्दिष्ट करें Specify IPv6 address to bind RPC server Allow IPv6 for RPC Ignore unsuccessful IPv4 bind for RPC Specify username[:password] required for RPC server RPC सर्वर के लिए उपयोगकर्ता नाम [: पासवर्ड] निर्दिष्ट करें Confirm rpc-bind-ip value is NOT a loopback (local) IP Rpc-bind-ip के मान की पुष्टि करें की वह लूपबैक (स्थानीय) IP तो नहीं है Specify a comma separated list of origins to allow cross origin resource sharing पार उत्पत्ति संसाधन साझा करने की अनुमति देने के लिए एक कॉमा से अलग की गई सूची को निर्दिष्ट करें Enable SSL on RPC connections: enabled|disabled|autodetect Path to a PEM format private key Path to a PEM format certificate Path to file containing concatenated PEM format certificate(s) to replace system CA(s). List of certificate fingerprints to allow Allow user (via --rpc-ssl-certificates) chain certificates Allow any peer certificate Invalid IP address given for -- -- के लिए दिया गया अमान्य IP पता permits inbound unencrypted external connections. Consider SSH tunnel or SSL proxy instead. Override with -- आवक अकूटलेखित बाहरी संपर्क की अनुमति देता है। इसके बजाय SSH सुरंग या SSL प्रॉक्सी पर विचार करें। ओवरराइड के साथ - Username specified with -- उपयोगकर्ता नाम के साथ निर्दिष्ट -- cannot be empty खाली नहीं हो सकता requires RPC server password -- RPC सर्वर पासवर्ड की आवश्यकता है -- cryptonote::simple_wallet Daemon uses a different RPC major version (%u) than the wallet (%u): %s. Either update one of them, or use --allow-mismatched-daemon-version. Spending from address index %d Sending %s. Your transaction needs to be split into %llu transactions. This will result in a transaction fee being applied to each transaction, for a total fee of %s The transaction fee is %s , of which %s is dust from change A total of %s from dust change will be sent to dust address Not enough money in unlocked balance No address given missing lockedblocks parameter bad locked_blocks parameter failed to parse Payment ID failed to parse key image No outputs found Multiple transactions are created, which is not supposed to happen The transaction uses multiple or no inputs, which is not supposed to happen Money successfully sent, transaction: missing threshold amount invalid amount threshold Claimed change does not go to a paid address दावा किया गया परिवर्तन भुगतान किए गए पते पर नहीं जा सका Claimed change is larger than payment to the change address दावा किया गया परिवर्तन परिवर्तन पते के भुगतान से बड़ा है Change goes to more than one address परिवर्तन एक से अधिक पते पर जाता है sending %s to %s %s को %s पर भेज रहा है dummy output(s) with no destinations कोई गंतव्य नहीं है no change कोई परिवर्तन नहीं Daemon is local, assuming trusted Password for new watch-only wallet false Commands: Unknown command: Command usage: Command description: wallet is watch-only and has no spend key command not supported by HW wallet wallet is watch-only and has no seed wallet is multisig but not yet finalized wallet is non-deterministic and has no seed Failed to retrieve seed wallet is multisig and has no seed Incorrect password Your original password was incorrect. Error with wallet rewrite: Random payment ID: Current fee is %s %s per %s Payment required, see the 'rpc_payment_info' command Error: failed to estimate backlog array size: Error: bad estimated backlog array size (current) %u block (%u minutes) backlog at priority %u%s %u to %u block (%u to %u minutes) backlog at priority %u No backlog at priority This wallet is already multisig wallet is watch-only and cannot be made multisig This wallet has been used before, please use a new wallet to create a multisig wallet Send this multisig info to all other participants, then use make_multisig <threshold> <info1> [<info2>...] with others' multisig info This includes the PRIVATE view key, so needs to be disclosed only to that multisig wallet's participants Invalid threshold Another step is needed Error creating multisig: Error creating multisig: new wallet is not multisig multisig address: This wallet is not multisig This wallet is already finalized Failed to finalize multisig Failed to finalize multisig: Multisig address: This multisig wallet is not yet finalized failed to save file फ़ाइल सहेजने में विफल Error exporting multisig info: Multisig info exported to failed to read file Multisig info imported Failed to import multisig info: Failed to update spent status after importing multisig info: Untrusted daemon, spent status may be incorrect. Use a trusted daemon and run "rescan_spent" This is not a multisig wallet Failed to sign multisig transaction Multisig error: Failed to sign multisig transaction: Transaction successfully signed to file It may be relayed to the network with submit_multisig Failed to load multisig transaction from file Multisig transaction signed by only %u signers, needs %u more signatures Transaction successfully submitted, transaction You can check its status by using the `show_transfers` command. unknown error अनजान त्रुटि Failed to export multisig transaction to file Saved exported multisig transaction file(s): unexpected error: अप्रत्याशित त्रुटि: Invalid key image अमान्य कुंजी छवि Invalid txid अवैध लेनदेन-आईडी Key image either not spent, or spent with mixin 0 मुख्य छवि या तो खर्च नहीं हुई, या 0 मिश्रण के साथ खर्च की गई Failed to get key image ring: मुख्य छवि रिंग प्राप्त करने में विफल: File doesn't exist फ़ाइल मौजूद नहीं है Invalid ring specification: अमान्य रिंग विनिर्देश: Invalid key image: अवैध कुंजी छवि: Invalid ring type, expected relative or abosolute: अमान्य रिंग प्रकार, सापेक्ष या पूर्ण की उम्मीद: Error reading line: पढ़ने की पंक्ति में त्रुटि: Invalid ring: अवैध रिंग: Invalid relative ring: Invalid absolute ring: Failed to set ring for key image: Continuing. Missing absolute or relative keyword invalid index: must be a strictly positive unsigned integer invalid index: indices wrap invalid index: indices should be in strictly ascending order failed to set ring Invalid key image or txid failed to unset ring RPC client ID: RPC client secret key: Failed to query daemon Using daemon: Payments required for node use, current credits: Credits target: Credits spent this session: Credit discrepancy this session: Difficulty: credits per hash found, credits/hash Mining for payment at %.1f H/s Estimated time till %u credits target mined: %s Mining for payment Not mining No payment needed for node use Bad argument: should be "add" Failed to open file Failed to save known rings: usage: %s <key_image>|<pubkey> Frozen: Not frozen: bytes sent bytes received No known public nodes address last_seen never Error retrieving public node list: Welcome to Wownero, the private cryptocurrency. Wownero, like Bitcoin, is a cryptocurrency. That is, it is digital money. Wownero protects your privacy on the blockchain, and while Wownero strives to improve all the time, no privacy technology can be 100% perfect, Wownero included. Wownero cannot protect you from malware, and it may not be as effective as we hope against powerful adversaries. Flaws in Wownero may be discovered in the future, and attacks may be developed to peek under some of the layers of privacy Wownero provides. Be safe and practice defense in depth. Daemon does not require payment for RPC access Starting mining for RPC access: diff %llu, %f credits/hash%s Run stop_mining_for_rpc to stop wallet is watch-only and cannot transfer ring size must be an integer >= WARNING: this is a non default ring size, which may harm your privacy. Default is recommended. could not change default ring size priority must be either 0, 1, 2, 3, or 4, or one of: could not change default priority invalid unit invalid count: must be an unsigned integer invalid value Invalid height Invalid target Invalid amount invalid argument: must be either 1/yes or 0/no Start mining in the daemon (bg_mining and ignore_battery are optional booleans). Stop mining in the daemon. Set another daemon to connect to. Save the current blockchain data. Synchronize the transactions and balance. Show the wallet's balance of the currently selected account. Show the incoming transfers, all or filtered by availability and address index. Output format: Amount, Spent("T"|"F"), "frozen"|"locked"|"unlocked", RingCT, Global Index, Transaction Hash, Address Index, [Public Key, Key Image] Show the payments for the given payment IDs. Show the blockchain height. Send all unlocked balance to an address and lock it for <lockblocks> (max. 1000000). If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. <priority> is the priority of the sweep. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Send all unmixable outputs to yourself with ring_size 1 Send all unlocked outputs below the threshold to an address. Send a single output of the given key image to an address without change. Donate <amount> to the development team (wownero.org). Sign a transaction from a file. If the parameter "export_raw" is specified, transaction raw hex data suitable for the daemon RPC /sendrawtransaction is exported. Submit a signed transaction from a file. Change the current log detail (level must be <0-4>). If no arguments are specified, the wallet shows all the existing accounts along with their balances. If the "new" argument is specified, the wallet creates a new account with its label initialized by the provided label text (which can be empty). If the "switch" argument is specified, the wallet switches to the account specified by <index>. If the "label" argument is specified, the wallet sets the label of the account specified by <index> to the provided label text. If the "tag" argument is specified, a tag <tag_name> is assigned to the specified accounts <account_index_1>, <account_index_2>, .... If the "untag" argument is specified, the tags assigned to the specified accounts <account_index_1>, <account_index_2> ..., are removed. If the "tag_description" argument is specified, the tag <tag_name> is assigned an arbitrary text <description>. If no arguments are specified or <index> is specified, the wallet shows the default or specified address. If "all" is specified, the wallet shows all the existing addresses in the currently selected account. If "new " is specified, the wallet creates a new address with the provided label text (which can be empty). If "label" is specified, the wallet sets the label of the address specified by <index> to the provided label text. Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID Print all entries in the address book, optionally adding/deleting an entry to/from it. Save the wallet data. Save a watch-only keys file. Display the private view key. Display the private spend key. Display the Electrum-style mnemonic seed Display the encrypted Electrum-style mnemonic seed. Rescan the blockchain for spent outputs. Get the transaction key (r) for a given <txid>. Set the transaction key (r) for a given <txid> in case the tx was made by some other device or 3rd party wallet. Check the amount going to <address> in <txid>. Generate a signature proving funds sent to <address> in <txid>, optionally with a challenge string <message>, using either the transaction secret key (when <address> is not your wallet's address) or the view secret key (otherwise), which does not disclose the secret key. Check the proof for funds going to <address> in <txid> with the challenge string <message> if any. Generate a signature proving that you generated <txid> using the spend secret key, optionally with a challenge string <message>. Check a signature proving that the signer generated <txid>, optionally with a challenge string <message>. Generate a signature proving that you own at least this much, optionally with a challenge string <message>. If 'all' is specified, you prove the entire sum of all of your existing accounts' balances. Otherwise, you prove the reserve of the smallest possible amount above <amount> available in your current account. Check a signature proving that the owner of <address> holds at least this much, optionally with a challenge string <message>. Show the unspent outputs of a specified address within an optional amount range. Set an arbitrary string note for a <txid>. Get a string note for a txid. Set an arbitrary description for the wallet. Get the description of the wallet. Show the wallet's status. Show the wallet's information. Sign the contents of a file. Verify a signature on the contents of a file. Import a signed key images list and verify their spent status. Attempts to reconnect HW wallet. Export a set of outputs owned by this wallet. Import a set of outputs owned by this wallet. Show information about a transfer to/from this address. Change the wallet's password. Print the information about the current fee and transaction backlog. Export data needed to create a multisig wallet Turn this wallet into a multisig wallet Turn this wallet into a multisig wallet, extra step for N-1/N wallets Export multisig info for other participants Import multisig info from other participants Sign a multisig transaction from a file Submit a signed multisig transaction from a file Export a signed multisig transaction to a file Print the ring(s) used to spend a given key image or transaction (if the ring size is > 1) Output format: Key Image, "absolute", list of rings Set the ring used for a given key image, so it can be reused in a fork Unsets the ring used for a given key image or transaction Save known rings to the shared rings database Freeze a single output by key image so it will not be used Thaw a single output by key image so it may be used again Checks whether a given output is currently frozen by key image Prints simple network stats Lists known public nodes Prints basic info about Wownero for first time users Returns version information Get info about RPC payments to current node Start mining to pay for RPC access Stop mining to pay for RPC access Show the help section or the documentation about a <command>. needs an argument set seed: needs an argument. available options: language 0 or 1 integer >= full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase) 0, 1, 2, 3, or 4, or one of 0|1|2 (or never|action|decrypt) wownero, millinero, micronero, nanonero, piconero unsigned integer amount block height <major>:<minor> 1/yes or 0/no floating point >= 0 set: unrecognized argument(s) Wallet name not valid. Please try again or use Ctrl-C to quit. Attempting to generate or restore wallet, but specified file(s) exist. Exiting to not risk overwriting. Wallet and key files found, loading... Key file found but not wallet file. Regenerating... Key file not found. Failed to open wallet: No wallet found with that name. Confirm creation of new wallet named: Generating new wallet... Can't specify more than one of --testnet and --stagenet can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-spend-key="wallet_name", --generate-from-keys="wallet_name", --generate-from-multisig-keys="wallet_name", --generate-from-json="jsonfilename" and --generate-from-device="wallet_name" can't specify both --restore-deterministic-wallet or --restore-multisig-wallet and --non-deterministic --restore-multisig-wallet uses --generate-new-wallet, not --wallet-file --restore-deterministic-wallet uses --generate-new-wallet, not --wallet-file specify a recovery parameter with the --electrum-seed="multisig seed here" specify a recovery parameter with the --electrum-seed="words list here" Multisig seed failed verification Electrum-style word list failed verification एलेक्ट्रम-शैली शब्द सूची सत्यापन विफल No data supplied, cancelled failed to parse address पते की व्याख्या करने में विफल This address is a subaddress which cannot be used here. failed to parse view key secret key failed to verify view key secret key view key does not match standard address account creation failed failed to parse spend key secret key failed to verify spend key secret key spend key does not match standard address Error: expected M/N, but got: Error: expected N > 1 and N <= M, but got: Error: M/N is currently unsupported. Generating master wallet from %u of %u multisig wallet keys failed to parse secret view key गुप्त दर्शन कुंजी की व्याख्या करने में विफल failed to verify secret view key गुप्त दर्शन कुंजी की पुष्टि करने में विफल Error: M/N is currently unsupported No restore height is specified. Assumed you are creating a new account, restore will be done from current estimated blockchain height. account creation aborted specify a wallet path with --generate-new-wallet (not --wallet-file) bad m_restore_height parameter: Restore height is: Restore height can't specify --subaddress-lookahead and --wallet-file at the same time failed to open account wallet is null Failed to initialize ring database: privacy enhancing features will be inactive wallet failed to connect to daemon: Daemon either is not started or wrong port was passed. Please make sure daemon is running or change the daemon address using the 'set_daemon' command. List of available languages for your wallet's seed: If your display freezes, exit blind with ^C, then run again with --use-english-language-names invalid language choice entered. Please try again. invalid password You had been using a deprecated version of the wallet. Please use the new seed that we provide. Generated new wallet: View key: failed to generate new wallet: नया बटुआ उत्पन्न करने में विफल: Your wallet has been generated! To start synchronizing with the daemon, use the "refresh" command. Use the "help" command to see the list of available commands. Use "help <command>" to see a command's documentation. Always use the "exit" command when closing wownero-wallet-cli to save your current session's state. Otherwise, you might need to synchronize your wallet again (your wallet keys are NOT at risk in any case). Generated new wallet on hw device: failed to generate new mutlisig wallet Generated new %u/%u multisig wallet: wallet file path not valid: Key file not found. Failed to open wallet Opened watch-only wallet Opened %u/%u multisig wallet%s Opened wallet You had been using a deprecated version of the wallet. Please proceed to upgrade your wallet. You had been using a deprecated version of the wallet. Your wallet file format is being upgraded now. failed to load wallet: Use the "help" command to see the list of available commands. Use "help <command>" to see a command's documentation. failed to deinitialize wallet Wallet data saved wallet is multisig and cannot save a watch-only version failed to read wallet password Watch only wallet saved as: Failed to save watch only wallet: this command requires a trusted daemon. Enable with --trusted-daemon Mining started in daemon mining has NOT been started: Mining stopped in daemon mining has NOT been stopped: Unexpected array length - Exited simple_wallet::set_daemon() Expected trusted or untrusted, got trusted untrusted This does not seem to be a valid daemon URL. Blockchain saved blockchain can't be saved: Height txid idx spent Enter password Starting refresh... New transfer received since rescan was started. Key images are incomplete. Refresh done, blocks received: daemon is busy. Please try again later. कार्यकर्ता व्यस्त है। बाद में पुन: प्रयास करें। Available options: seed language Set the wallet's seed language. always-confirm-transfers <1|0> Whether to confirm unsplit txes. print-ring-members <1|0> Whether to print detailed information about ring members during confirmation. store-tx-info <1|0> Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference. default-ring-size <n> Set the default ring size (obsolete). auto-refresh <1|0> Whether to automatically synchronize new blocks from the daemon. refresh-type <full|optimize-coinbase|no-coinbase|default> Set the wallet's refresh behaviour. priority [0|1|2|3|4] Set the fee to default/unimportant/normal/elevated/priority. confirm-missing-payment-id <1|0> (obsolete) ask-password <0|1|2 (or never|action|decrypt)> action: ask the password before many actions such as transfer, etc decrypt: same as action, but keeps the spend key encrypted in memory when not needed unit <wownero|millinero|micronero|nanonero|piconero> Set the default wownero (sub-)unit. min-outputs-count [n] Try to keep at least that many outputs of value at least min-outputs-value. min-outputs-value [n] Try to keep at least min-outputs-count outputs of at least that value. merge-destinations <1|0> Whether to merge multiple payments to the same destination address. confirm-backlog <1|0> Whether to warn if there is transaction backlog. confirm-backlog-threshold [n] Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks. confirm-export-overwrite <1|0> Whether to warn if the file to be exported already exists. refresh-from-block-height [n] Set the height before which to ignore blocks. auto-low-priority <1|0> Whether to automatically use the low priority fee level when it's safe to do so. segregate-pre-fork-outputs <1|0> Set this if you intend to spend outputs on both Wownero AND a key reusing fork. key-reuse-mitigation2 <1|0> Set this if you are not sure whether you will spend on a key reusing Wownero fork later. subaddress-lookahead <major>:<minor> Set the lookahead sizes for the subaddress hash table. segregation-height <n> Set to the height of a key reusing fork you want to use, 0 to use default. ignore-fractional-outputs <1|0> Whether to ignore fractional outputs that result in net loss when spending due to fee. ignore-outputs-above <amount> Ignore outputs of amount above this threshold when spending. Value 0 is translated to the maximum value (18 million) which disables this filter. ignore-outputs-below <amount> Ignore outputs of amount below this threshold when spending. track-uses <1|0> Whether to keep track of owned outputs uses. setup-background-mining <1|0> Whether to enable background mining. Set this to support the network and to get a chance to receive new wownero. device-name <device_name[:device_spec]> Device name for hardware wallet. export-format <"binary"|"ascii"> Save all exported files as binary (cannot be copied and pasted) or ascii (can be). persistent-client-id <1|0> Whether to keep using the same client id for RPC payment over wallet restarts. auto-mine-for-rpc-payment-threshold <float> Whether to automatically start mining for RPC payment if the daemon requires it. credits-target <unsigned int> The RPC payment credits balance to target (0 for default). RPC client secret key should be 32 byte in hex format With background mining enabled, the daemon will mine when idle and not on battery. Error checking daemon RPC access prices Error checking daemon RPC access prices: Failed to connect to daemon Daemon RPC credits/hash is less than was claimed. Either this daemon is cheating, or it changed its setup recently. Claimed: Actual: no connection to daemon. Please make sure daemon is running. payment required. RPC error: RPC त्रुटि: refresh error: internal error: आंतरिक त्रुटि: refresh failed: Blocks received: (Some owned outputs have partial key images - import_multisig_info needed) (Some owned outputs have missing key images - import_key_images needed) Currently selected account: [ ] (No tag assigned) Tag: Balance: unlocked balance: Balance per address: Address Balance Unlocked balance Outputs Label %8u %6s %21s %21s %7u %21s pubkey key image spent unlocked ringct global index tx id addr index Used at heights: T F locked [frozen] RingCT - No incoming transfers No incoming available transfers No incoming unavailable transfers payment transaction height unlock time No payments with id payment ID has invalid format, expected 16 or 64 character hex string: failed to get blockchain height: failed to get spent status Transaction %llu/%llu: txid=%s failed to find construction data for tx input failed to get output: output key's originating block height shouldn't be higher than the blockchain height Originating block heights: | | Warning: Some input keys being spent are from the same transaction blocks that are temporally very close , which can break the anonymity of ring signature. Make sure this is intentional! Ring size must not be 0 ring size %u is too small, minimum is %u ring size %u is too large, maximum is %u wrong number of arguments payment id failed to encode Locked blocks too high, max 1000000 (˜4 yrs) failed to parse short payment ID from URI Invalid last argument: a single transaction cannot use more than one payment id failed to parse payment id, though it was detected Is this okay anyway? There is currently a %u block backlog at that fee level. Is this okay? Sweeping %s in %llu transactions for a total fee of %s. Is this okay? Sweeping %s for a total fee of %s. Is this okay? Discarding %s of unmixable outputs that cannot be spent, which can be undone by "rescan_spent". Is this okay? Failed to parse number of outputs Amount of outputs should be greater than 0 payment id has invalid format, expected 16 or 64 character hex string: भुगतान पहचान में अमान्य प्रारूप है, 16 या 64 वर्ण हेक्स स्ट्रिंग: bad locked_blocks parameter: a single transaction cannot use more than one payment id: failed to set up payment id, though it was decoded correctly Send this multisig info to all other participants, then use exchange_multisig_keys <info1> [<info2>...] with others' multisig info Multisig wallet has been successfully created. Current wallet type: Failed to perform multisig keys exchange: Failed to load multisig transaction from MMS Failed to mark output spent: Failed to mark output unspent: Spent: Not spent: Failed to check whether output is spent: Please confirm the transaction on the device Device name not specified Device reconnect failed Device reconnect failed: Show the incoming/outgoing transfers within an optional height range. Output format: In or Coinbase: Block Number, "block"|"in", Time, Amount, Transaction Hash, Payment ID, Subaddress Index, "-", Note Out: Block Number, "out", Time, Amount*, Transaction Hash, Payment ID, Fee, Destinations, Input addresses**, "-", Note Pool: "pool", "in", Time, Amount, Transaction Hash, Payment Id, Subaddress Index, "-", Note, Double Spend Note Pending or Failed: "failed"|"pending", "out", Time, Amount*, Transaction Hash, Payment ID, Fee, Input addresses**, "-", Note * Excluding change and fee. ** Set of address indices used as inputs in this transfer. export_transfers [in|out|all|pending|failed|coinbase] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] [output=<filepath>] Export to CSV the incoming/outgoing transfers within an optional height range. Rescan the blockchain from scratch. If "hard" is specified, you will lose any information which can not be recovered from the blockchain itself. Export a signed set of key images to a <filename>. Synchronizes key images with the hw wallet. Generate a new random full size payment id (obsolete). These will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids. Performs extra multisig keys exchange rounds. Needed for arbitrary M/N multisig wallets Interface with the MMS (Multisig Messaging System) <subcommand> is one of: init, info, signer, list, next, sync, transfer, delete, send, receive, export, note, show, set, help send_signer_config, start_auto_config, stop_auto_config, auto_config Get help about a subcommand with: help mms <subcommand>, or mms help <subcommand> Initialize and configure the MMS for M/N = number of required signers/number of authorized signers multisig Display current MMS configuration Set or modify authorized signer info (single-word label, transport address, Wownero address), or list all signers List all messages Evaluate the next possible multisig-related action(s) according to wallet state, and execute or offer for choice By using 'sync' processing of waiting messages with multisig sync info can be forced regardless of wallet state Force generation of multisig sync info regardless of wallet state, to recover from special situations like "stale data" errors Initiate transfer with MMS support; arguments identical to normal 'transfer' command arguments, for info see there Delete a single message by giving its id, or delete all messages by using 'all' Send a single message by giving its id, or send all waiting messages Check right away for new messages to receive Write the content of a message to a file "mms_message_content" Send a one-line message to an authorized signer, identified by its label, or show any waiting unread notes Show detailed info about a single message Available options: auto-send <1|0> Whether to automatically send newly generated messages right away. Send completed signer config to all other authorized signers Start auto-config at the auto-config manager's wallet by issuing auto-config tokens and optionally set others' labels Delete any auto-config tokens and abort a auto-config process Start auto-config by using the token received from the auto-config manager Mark output(s) as spent so they never get selected as fake outputs in a ring Marks an output as unspent so it may get selected as a fake output in a ring Checks whether an output is marked as spent <device_name[:device_spec]> wrong number range, use: %s NOTE: the following %s can be used to recover access to your wallet. Write them down and store them somewhere safe and secure. Please do not store them in your email or on file storage services outside of your immediate control. string 25 words Secret spend key (%u of %u) Use --restore-height or --restore-date if you want to restore an already setup account from a specific height. Is this okay? Still apply restore height? Enter the number corresponding to the language of your choice Device requires attention Enter device PIN Failed to read device PIN Please enter the device passphrase on the device Enter device passphrase Failed to read device passphrase The first refresh has finished for the HW-based wallet with received money. hw_key_images_sync is needed. Do you want to do it now? (Y/Yes/N/No): Unknown command '%s', try 'help' Inactivity lock timeout disabled on Windows Invalid number of seconds Export format not specified Export format not recognized. Display the restore height Lock the wallet console, requiring the wallet password to continue unsigned integer (seconds, 0 to disable) "binary" or "ascii" Warning: using an untrusted daemon at %s Using a third party daemon can be detrimental to your security and privacy Using your own without SSL exposes your RPC traffic to monitoring You are strongly encouraged to connect to the Wownero network using your own daemon If you or someone you trust are operating this daemon, you can use --trusted-daemon Moreover, a daemon is also less secure when running in bootstrap mode If you are new to Wownero, type "welcome" for a brief overview. Error creating wallet: Failed to query mining status: Failed to setup background mining: Background mining enabled. Thank you for supporting the Wownero network. Background mining not enabled. Run "set setup-background-mining 1" to change. Using an untrusted daemon, skipping background mining check The daemon is not set up to background mine. Enabling this supports the network you are using, and makes you eligible for receiving new wownero Background mining not enabled. Set setup-background-mining to 1 to change. NOTE: This transaction is locked, see details with: show_transfer hw_key_images_sync skipped. Run command manually before a transfer. Invalid keyword: Input %llu/%llu (%s): amount=%s Transaction spends more than one very old output. Privacy would be better if they were sent separately. Spend them now anyway? I locked your Wownero wallet to protect you while you were away Locked due to inactivity. The wallet password is required to unlock the console. amount is wrong: expected number from 0 to transaction cancelled. No outputs found, or daemon is not ready Unlike Bitcoin, your Wownero transactions and balance stay private and are not visible to the world by default. However, you have the option of making those available to select parties if you choose to. Welcome to Wownero and financial privacy. For more information see https://GetWownero.org NOTE: this transaction uses an encrypted payment ID: consider using subaddresses instead WARNING: this transaction uses an unencrypted payment ID: these are obsolete and ignored. Use subaddresses instead. Failed to check for backlog: Transaction WARNING: Outputs of multiple addresses are being used together, which might potentially compromise your privacy. . . This transaction (including %s change) will unlock on block %llu, in approximately %s days (assuming 2 minutes per block) Unsigned transaction(s) successfully written to MMS Failed to write transaction(s) to file फ़ाइल में लेनदेन लिखने में विफल Unsigned transaction(s) successfully written to file: Failed to cold sign transaction with HW wallet No unmixable outputs found Sweeping Failed to parse donation address: Donating %s %s to %s. Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu, %s. %sIs this okay? usage: export_transfers [in|out|all|pending|failed|coinbase] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] [output=<path>] direction timestamp running balance hash payment ID fee destination index note CSV exported to Rescan anyway? Warning: your restore height is higher than wallet restore height: Rescan anyway ? (Y/Yes/N/No): MMS received new message locked due to inactivity <index> is out of bounds Normal Type: Network type: Testnet Stagenet Mainnet मुख्यनेट (Y/Yes/N/No): (ह/हाँ/न/नहीं): Choose processing: प्रसंस्करण चुनें: Sign tx लेन-देन हस्ताक्षर करें Send the tx for submission to Send the tx for signing to Submit tx unknown Choice: Wrong choice Id I/O Authorized Signer Message Type Height R Message State Since ago # Transport Address Auto-Config Token Wownero Address <not set> Message In/out: State: %s since %s, %s ago Sent: Never Sent: %s, %s ago Authorized signer: Content size: bytes Content: (binary data) Send these messages now? Queued for sending. Invalid message id usage: mms init <required_signers>/<authorized_signers> <own_label> <own_transport_address> The MMS is already initialized. Re-initialize by deleting all signer info and messages? Error in the number of required signers and/or authorized signers The MMS is not active. Invalid signer number mms signer [<number> <label> [<transport_address> [<wownero_address>]]] Invalid Wownero address Wallet state does not allow changing Wownero addresses anymore Usage: mms list Usage: mms next [sync] No next step: prepare_multisig make_multisig exchange_multisig_keys export_multisig_info import_multisig_info sign_multisig submit_multisig Send tx Process signer config Replace current signer config with the one displayed above? Process auto config data Nothing ready to process Usage: mms sync Usage: mms delete (<message_id> | all) Delete all messages? Usage: mms send [<message_id>] Usage: mms receive Usage: mms export <message_id> Message content saved to: Failed to to save message content Usage: mms note [<label> <text>] No signer found with label Usage: mms show <message_id> Usage: mms set <option_name> [<option_value>] Wrong option value Auto-send is on Auto-send is off Unknown option Usage: mms help [<subcommand>] Usage: mms send_signer_config Signer config not yet complete Usage: mms start_auto_config [<label> <label> ...] There are signers without a label set. Complete labels before auto-config or specify them as parameters here. Auto-config is already running. Cancel and restart? Usage: mms stop_auto_config Delete any auto-config tokens and stop auto-config? Usage: mms auto_config <auto_config_token> Invalid auto-config token Auto-config already running. Cancel and restart? MMS not available in this wallet The MMS is not active. Activate using the "mms init" command Invalid MMS subcommand Error in MMS command: wallet is watch-only and cannot sign This wallet is multisig and cannot sign Bad signature from Good signature from wallet is watch-only and cannot export key images Signed key images exported to command only supported by HW wallet hw wallet does not support cold KI sync Please confirm the key image sync on the device Key images synchronized to height Running untrusted daemon, cannot determine which transaction output is spent. Use a trusted daemon with --trusted-daemon and run rescan_spent spent, unspent Failed to import key images Failed to import key images: मुख्य छवि आयात करने में विफल: Failed to reconnect device Failed to reconnect device: Outputs exported to Double spend seen on the network: this transaction may or may not end up being mined Transaction ID not found Transaction successfully saved to , txid Failed to save transaction to true failed to parse refresh type Enter optional seed offset passphrase, empty to see raw seed Enter seed offset passphrase, empty if none You may want to remove the file "%s" and try again Donating %s %s to The Wownero Project (wownero.org or %s). This is a multisig wallet, it can only sign with sign_multisig This is a watch only wallet यह वॉलेट केवल देख सकते हैं Failed to sign transaction लेन-देन पर हस्ताक्षर करने में विफल Failed to sign transaction: Transaction raw hex data exported to Failed to load transaction from file लेनदेन को फ़ाइल से लोड करने में विफल failed to parse txid Tx key: no tx keys found for this txid इस txid के लिए कोई tx कुंजियाँ नहीं मिलीं failed to parse tx_key Tx key successfully stored. Failed to store tx key: signature file saved to: failed to save signature file error: failed to parse tx key received in txid WARNING: this transaction is not yet included in the blockchain! WARNING: failed to determine number of confirmations! received nothing in txid failed to load signature file Good signature Bad signature wallet is watch-only and cannot generate the proof The reserve proof can be generated only by a full wallet Address must not be a subaddress पता एक उप-पता नहीं होना चाहिए usage: show_transfers [in|out|all|pending|failed|coinbase] [index=<N1>[,<N2>,...]] [<min_height> [<max_height>]] bad min_height parameter: bad max_height parameter: block in [Double spend seen on the network: this transaction may or may not end up being mined] <min_amount> should be smaller than <max_amount> There is no unspent output in the specified address Amount: , number of keys: Min block height: Max block height: Min amount found: Max amount found: Total count: Bin size: Outputs per *: count ^ | + +--> block height ^ ^ Warning: this will lose any information which can not be recovered from the blockchain. This includes destination addresses, tx secret keys, tx notes, etc Good signature -- total: %s, spent: %s, unspent: %s First line is not an amount Invalid output: अवैध उत्पाद: Invalid output key, and file doesn't exist Invalid output WARNING: from v8, ring size will be fixed and this setting will be ignored. invalid argument: must be either 0/never, 1/action, or 2/encrypt/decrypt Transfer <amount> to <address>. If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding URI_2 or <address_2> <amount_2> etcetera (before the payment ID, if it's included) Transfer <amount> to <address> and lock it for <lockblocks> (max. 1000000). If the parameter "index=<N1>[,<N2>,...]" is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. <priority> is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <ring_size> is the number of inputs to include for untraceability. Multiple payments can be made at once by adding URI_2 or <address_2> <amount_2> etcetera (before the payment ID, if it's included) Send all unlocked balance to an address. If the parameter "index<N1>[,<N2>,...]" is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. If the parameter "outputs=<N>" is specified and N > 0, wallet splits the transaction into N even outputs. Password needed (%s) - use the refresh command Daemon requests payment at diff %llu, with %f credits/hash%s. Run start_mining_for_rpc to start mining to pay for RPC access, or use another daemon Error mining to daemon: Failed to start mining for RPC payment wallet (no daemon) (out of sync) (Untitled account) failed to parse index: specify an index between 0 and Grand total: Balance: , unlocked balance: Untagged accounts: Tag %s is unregistered. Accounts with tag: Tag's description: Account %c%8u %6s %21s %21s %21s ---------------------------------------------------------------------------------- %15s %21s %21s Primary address (used) (Untitled address) <index_min> is already out of bound <index_max> exceeds the bound Integrated addresses can only be created for account 0 Matching integrated address: Integrated address: %s, payment ID: %s Subaddress: Standard address: failed to parse payment ID or address failed to parse index Address book is empty. Index: Address: Description: no description found description found: Filename: Watch only %u/%u multisig%s %s change to %s %s बदलकर %s करें This transaction has %u confirmations gencert Filename to save the certificate Filename to save the private key Passphrase with which to encrypt the private key File containing the passphrase with which to encrypt the private key Prompt for a passphrase with which to encrypt the private key Argument is needed: Failed to read passphrase Failed to create certificate Failed to write certificate: Failed to write private key: Failed to save certificate file Failed to save private key file genms Base filename (-1, -2, etc suffixes will be appended as needed) Give threshold and participants at once as M/N How many participants will share parts of the multisig wallet How many signers are required to sign a valid transaction Create testnet multisig wallets Create stagenet multisig wallets Create an address file for new wallets Generating %u %u/%u multisig wallets Failed to verify multisig info Error verifying multisig extra info Generated multisig wallets for address Error creating multisig wallets: This program generates a set of multisig wallets - use this simpler scheme only if all the participants trust each other Error: Can't specify more than one of --testnet and --stagenet Error: expected N/M, but got: Error: either --scheme or both of --threshold and --participants may be given Error: expected N > 1 and N <= M, but got N==%u and M==%d Error: --filename-base is required mms::message_store Use PyBitmessage instance at URL <arg> Specify <arg> as username:password for PyBitmessage API Auto-config cannot proceed because auto config data from other signers is not complete The signer config is not complete. Wallet can't go multisig because key sets from other signers are missing or not complete. Wallet can't start another key exchange round because key sets from other signers are missing or not complete. Syncing not done because multisig sync data from other signers are missing or not complete. There are waiting messages, but nothing is ready to process under normal circumstances Use "mms next sync" if you want to force processing of the waiting sync data Use "mms note" to display the waiting notes There are no messages waiting to be processed. key set additional key set multisig sync data partially signed tx fully signed tx note signer config auto-config data unknown message type in out unknown message direction ready to send sent waiting processed cancelled unknown message state sw Generate new wallet and save it to <arg> Generate new wallet from device and save it to <arg> Generate incoming-only wallet from view key Generate deterministic wallet from spend key Generate wallet from private keys Generate a master wallet from multisig wallet keys Language for mnemonic Specify Electrum seed for wallet recovery/creation Recover wallet using Electrum-style mnemonic seed alias for --restore-deterministic-wallet Recover multisig wallet using Electrum-style mnemonic seed Generate non-deterministic view and spend keys Restore from estimated blockchain height on specified date failed to read wallet password Enter a new password for the wallet Wallet password invalid argument: must be either 0/1, true/false, y/n, yes/no DNSSEC validation passed WARNING: DNSSEC validation was unsuccessful, this address may not be correct! For URL: Wownero Address = you have cancelled the transfer request failed to parse index: invalid format for subaddress lookahead; must be <major>:<minor> no connection to daemon. Please make sure daemon is running. RPC error: RPC त्रुटि: failed to get random outputs to mix: Not enough money in unlocked balance Failed to find a way to create transactions. This is usually due to dust which is so small it cannot pay for itself in fees, or trying to send more money than the unlocked balance, or not leaving enough for fees not enough outputs for specified ring size निर्दिष्ट रिंग आकार के लिए पर्याप्त आउटपुट नहीं है output amount उत्पादित राशि found outputs to use उपयोग करने के लिए आउटपुट मिले Please use sweep_unmixable. transaction was not constructed लेन-देन का निर्माण नहीं किया गया था Reason: one of destinations is zero एक गंतव्य शून्य है failed to find a suitable way to split transactions लेनदेन को विभाजित करने का एक उपयुक्त तरीका खोजने में विफल रहा unknown transfer error: अनजान स्थानांतरण त्रुटि: Multisig error: internal error: आंतरिक त्रुटि: unexpected error: अप्रत्याशित त्रुटि: There was an error, which could mean the node may be trying to get you to retry creating a transaction, and zero in on which outputs you own. Or it could be a bona fide error. It may be prudent to disconnect from this node, and not try to send a transaction immediately. Alternatively, connect to another node so the original node cannot correlate information. File %s likely stores wallet private keys! Use a different file name. seconds minutes hours days months a long time This is the command line wownero wallet. It needs to connect to a wownero daemon to work correctly. WARNING: Do not reuse your Wownero keys on another fork, UNLESS this fork has key reuse mitigations built in. Doing so will harm your privacy. Unknown command: Allow communicating with a daemon that uses a different RPC version Restore from specific blockchain height The newly created transaction will not be relayed to the wownero network Create an address file for new wallets Display English language names daemon is busy. Please try again later. कार्यकर्ता व्यस्त है। बाद में पुन: प्रयास करें। possibly lost connection to daemon Error: Is this OK? transaction %s was rejected by daemon File %s already exists. Are you sure to overwrite it? Failed to initialize wallet tools::wallet2 Use daemon instance at <host>:<port> Use daemon instance at host <arg> instead of localhost Wallet password file Use daemon instance at port <arg> instead of 18081 For testnet. Daemon must also be launched with --testnet flag can't specify daemon host or port more than once can't specify more than one of --password and --password-file the password file specified could not be read Failed to load file Wallet password (escape/quote as needed) [<ip>:]<port> socks proxy to use for daemon connections Enable commands which rely on a trusted daemon Disable commands which rely on a trusted daemon Specify username[:password] for daemon RPC client Enable SSL on daemon RPC connections: enabled|disabled|autodetect List of valid fingerprints of allowed RPC servers Allow any SSL certificate from the daemon Allow user (via --daemon-ssl-ca-certificates) chain certificates For stagenet. Daemon must also be launched with --stagenet flag Set shared ring database path Number of rounds for the key derivation function HW device to use HW device wallet derivation path (e.g., SLIP-10) Do not use DNS Do not connect to a daemon, nor use DNS File containing extra entropy to initialize the PRNG (any data, aim for 256 bits of entropy to be useful, wihch typically means more than 256 bits of data) Invalid argument for Enabling -- requires -- or -- or use of a .onion/.i2p domain --trusted-daemon and --untrusted-daemon are both seen, assuming untrusted Daemon is local, assuming trusted no password specified; use --prompt-for-password to prompt for a password Enter a new password for the wallet Wallet password Failed to parse JSON Version %u too new, we can only grok up to %u failed to parse view key secret key failed to verify view key secret key failed to parse spend key secret key failed to verify spend key secret key Electrum-style word list failed verification एलेक्ट्रम-शैली शब्द सूची सत्यापन विफल At least one of either an Electrum-style word list, private view key, or private spend key must be specified Both Electrum-style word list and private key(s) specified invalid address view key does not match standard address spend key does not match standard address Cannot generate deprecated wallets from JSON failed to parse address: Address must be specified in order to create watch-only wallet failed to generate new wallet: नया बटुआ उत्पन्न करने में विफल: Password is needed to compute key image for incoming wownero Invalid password: password is needed to compute key image for incoming wownero Primary account No funds received in this tx. failed to read file Set subaddress lookahead sizes to <major>:<minor> Path to a PEM format private key Path to a PEM format certificate Path to file containing concatenated PEM format certificate(s) to replace system CA(s). tools::wallet_rpc_server Failed to create directory Failed to create directory %s: %s Cannot specify -- and -- Failed to create file . Check permissions or remove file Error writing to file RPC username/password is stored in file Tag %s is unregistered. Transaction not possible. Available only %s, transaction amount %s = %s + %s (fee) This is the RPC wownero wallet. It needs to connect to a wownero daemon to work correctly. Can't specify more than one of --testnet and --stagenet Can't specify more than one of --wallet-file and --generate-from-json Must specify --wallet-file or --generate-from-json or --wallet-dir Loading wallet... Saving wallet... Successfully saved Successfully loaded Wallet initialization failed: Failed to initialize wallet RPC server Starting wallet RPC server Failed to run wallet: Stopped wallet RPC server Failed to save wallet: wallet_args Wallet options Generate wallet from JSON format file Use wallet <arg> Set RPC client secret key for RPC payments Max number of threads to use for a parallel job Specify log file Config file General options This is the command line wownero wallet. It needs to connect to a wownero daemon to work correctly. Can't find config file Logging to: Logging to %s WARNING: You may not have a high enough lockable memory limit see ulimit -l Usage: