Refresh the nodes list by pulling down & bookmark 3–5 nodes to allow Monerujo - to choose the best one for you!
-Monerujo uses a Remote Node (sometimes also called Daemon) to communicate with - the Monero Network without having to download and store a copy of the - whole blockchain itself.
-
If the list is empty, you can either add new nodes manually or let Monerujo - scan the network for you. Or both. Read on…
-The node list shows all currently known nodes. Additionally, the timestamp - of the latest block known to each node is shown under the node name. An icon - representing the node's response behaviour - (which indicates the level of connectivity to be expected) - is shown next to each node.
-Any node in the list can be bookmarked for later use. - Nodes which are not bookmarked will be forgotten.
-
Monerujo will choose the optimal bookmarked node each time you use it. - It does this by checking the blockheight (how up-to-date - is the node?) as well as the response behaviour (how fast does the node respond to requests?).
-The list is sorted by these characteristics, so the top node would be the one Monerujo - would choose right now. The bottom of the list would show very slow or unavailable nodes.
-By touching the "Add Node" button at the bottom, you will be asked to - enter the node details in the following dialog. - The "Address" is the hostname or IP-address of the node - this is the only - mandatory entry. - Enter the "Port" if the node runs on a non-default port (e.g. 18089). - You can also optionally name the node, so you can identify it easier later on. - Some nodes require credentials to use them. Enter the provided username & - password in the appropriate fields. Now you can "Test" these setting. - The "Test Results" will display the blockheight, response time and actual IP used. - The result may also be an error - usually because the hostname provided is - not reachable in a sensible amount of time or the credentials are incorrect. - Or the hostname/port combination does not point to an actual Monero Node! - Once the test passes (no error) - you're set to press "OK" to save & - bookmark this node.
-Additionally, you can scan the network for nodes. Monerujo will start - scanning the network for Remote Nodes on port 18089. It begins by asking your - bookmarked nodes for other peers in the Monero P2P network and then continues - by asking those for their peers, and so on. If you have no bookmarked nodes - (or they don't tell us about their peers), - Monerujo will go straight to the Monero seed nodes hardcoded into Monero. The - scan stops when it finds 10 remote nodes in total.
+下拉節點列表即可重新整理節點狀態,你可以手動新增三至五個節點,Monerujo 將會自動為你挑選最佳的節點!
+Monerujo 必須透過遠端節點 (有時則稱為 Daemon ) 連接至 Monero 交易網路,透過這種方式就不需要下載和儲存整個區塊鏈的副本。
+
如果列表是空白的,你可以自行手動新增節點或是讓 Monerujo 為你掃描網路上的可用節點,以下是詳細教學。
+節點列表中顯示了目前已知的節點,另外,在名稱下方的的時間戳記表示為其最後更新區塊的時間。 + 每個節點旁邊會有一個圖示來呈現他的狀態 (通常代表著其連接的品質)。
+每個在列表中的節點都可以加上書籤標記以保留到後續使用,沒有加上書籤的節點則會被捨棄。
+
Monerujo 會在你每次使用錢包時,在書籤內選擇最好的節點。這是透過檢查該節點的區塊高度 (節點資料有多即時?) 與回應狀態 (節點的反應有多迅速?) 來達成。
+列表會依這些資訊做排序,因此排在最上面的節點就是 Monerujo 目前會使用的節點,列表底部則是反應非常遲鈍或是無法使用的節點。
+點選下方的「新增節點」,你將會被要求輸入節點的資訊。 + 在「位置」這欄請輸入節點的網址或是 IP 位址,這是唯一的必填資訊。 + 如果該節點是運作在非預設的通訊埠 (譬如是 18089),請輸入於「通訊埠」的欄位中。 + 你也可以命名該節點以方便在後續使用時更容易辨識。 + 若有些節點要求登入資訊,請輸入於「登入名稱」與「密碼」的欄位中。 + 現在你可以按下「測試節點」以檢查節點設定。 + 測試結果將會顯示區塊高度、回應速度與實際的 IP 位址。 + 而測試結果也有可能顯示錯誤,這通常代表著無法在可接受的時間內連接到該節點網址,或是登入資訊設定有誤。 + 也有可能是節點網址與通訊埠的組合有誤而導致無法連接到該 Monero 節點! + 只要測試結果通過 (沒有錯誤) - 你就可以按下「好的」以儲存該節點並將之加入書籤。
+此外,你可以掃描可用的遠端節點,Monerujo 將會掃描網路上開放通訊埠 18089 的遠端節點。 + 首先它會從你的書籤節點先取得 P2P 連接清單,接著再從這些清單內檢查可用的節點。 + 如果你沒有任何書籤節點 (或是書籤節點無法提供它們的連接清單),Monerujo 將會直接從 Monero 內建的種子節點取得清單。 + 這個掃描功能將會在總共可用節點的數量達到十個後停止。
]]>