#!/bin/sh
export PATH=$PATH:/bin/vs/cgi-bin:/bin/vs:/komod


## 加载/卸载 wifi ko
wifiko()
{
    if [ $1 = "load" ]
    then
        $drvload
    elif [ $1 = "unload" ]
    then
        $drvunload
    fi
        
}

wifiko_ap()
{
    if [ $1 = "load" ]
    then
        $drvload_ap
    elif [ $1 = "unload" ]
    then
        $drvunload_ap
    fi
}



#$1 ssid
#$2 wifikeytype
#$3 wepid
#$4 wifikey
#$5 wpa_config filename

gen_wpa_config()
{
    wifiessid=$1
    wifikeytype=$2
    wifiwhichkey=$3
    wifikey=$4
    wifi_wpa_conf=$5
    show_dbg2 "gen_wpa_config $*"
    show_info "gen wpa ssid:$wifiessid,keytype:$wifikeytype,keyidx:$wifiwhichkey,key:$wifikey,file:$wifi_wpa_conf"
    
	##实时匹配当前ssid的加密类型,如果匹配不上就按原来文件里保存的类型去执行
	##这样做的目的是防止用户改了加密类型但是ssid和pwd都没有改从而导致设备连不上route
	if [ ! -z $customernum ] && [ $customernum == "123" ];then
		echo -n "NOTFOUND" > /etc/network/wifista.conf
	fi
    rm   -Rf $wpa_config_tmp 2>/dev/null
    echo "ctrl_interface=/var/run/wpa_supplicant" > $wpa_config_tmp

    echo "ap_scan=1" >>  $wpa_config_tmp
    echo "update_config=1" >>  $wpa_config_tmp
    
    #wifikeytype define in file $wifi_config
    #wifikeytype =1: no key
    #wifikeytype =2: wep
    #wifikeytype =3:wpa
    
    if [ $wifikeytype = 1 ]
    then
        echo "network={" >>  $wpa_config_tmp
        echo "ssid=${wifiessid} " >>  $wpa_config_tmp
        echo   "key_mgmt=NONE" >>  $wpa_config_tmp
        echo "}" >>  $wpa_config_tmp
    elif [ $wifikeytype = 2 ]
    then
        echo "network={" >>  $wpa_config_tmp
        echo "ssid=${wifiessid} " >>  $wpa_config_tmp
        wifikeylen=`expr length "$wifikey"`        
        show_info wifikey $wifikey wifikeylen is $wifikeylen
        
        if [ $wifikeylen -eq 5 ] || [ $wifikeylen -eq 13 ] || [ $wifikeylen -eq 16 ] 
        then
            ##字符
            show_info "wepkey char"
            echo   "wep_key${wifiwhichkey}=\"${wifikey}\"" >>  $wpa_config_tmp 
        elif [ $wifikeylen -eq 10 ] || [ $wifikeylen -eq 26 ] || [ $wifikeylen -eq 32 ] 
        then
            show_info "wepkey hex"
            echo   "wep_key${wifiwhichkey}=${wifikey}" >>  $wpa_config_tmp 
        else
            show_info "wepkey err"
        fi
        ####echo   "wep_key${wifiwhichkey}=${wifikey}" >>  $wpa_config_tmp 
        
        echo   "key_mgmt=NONE" >>  $wpa_config_tmp
        echo   "wep_tx_keyidx=${wifiwhichkey}" >>  $wpa_config_tmp
        echo   "auth_alg=OPEN SHARED" >>  $wpa_config_tmp
        echo " }" >>  $wpa_config_tmp

    elif [ $wifikeytype = 3 ]
    then
        if [ x"$wifikey" = x ] 
        then
            echo "ERROR. WifiKey is null"
            wifikey="12345678"
        fi

        wifikeylen=`expr length "$wifikey"`
        echo wifikey is $wifikey wifikeylen is $wifikeylen
        if [ $wifikeylen -lt 8 ]
        then
            echo "ERROR. Wifikey length must large than 8"
            wifikey="12345678"
        fi
        #wpa_passphrase  "$wifiessid" "$wifikey" >> $wpa_config_tmp
		wpaconf $wifiessid $wifikey >> $wpa_config_tmp
    fi
    
    #for hide ssid
    networkline=`cat $wpa_config_tmp | grep "network={" -n | awk -F ":" '{print $1}'`
    if [ -n "$networkline" ];then
        networkline=`expr $networkline + 1`
        sed -i "$networkline s/^/\tscan_ssid=1\n/" $wpa_config_tmp
    fi    
    
    sync
}

wifi_sta_connect_ex()
{
	show_dbg2 "XXXXXXXXXX DONNOTCALL wifi_sta_connect_ex"
	return
	sta_ssid=$1
	sta_key=$2
	sta_key_type=$3
	wifiwhichkey=0
	
	#if [  -e "$wpa_config_tmp" ];then
		show_info "wifi_sta_connect_ex wifiessid:$sta_ssid  wifikey:$sta_key wifikeytype:$sta_key_type" 
		
		show_dbg2 "wpa_config_tmp:$wpa_config_tmp"
		gen_wpa_config "${sta_ssid}" ${sta_key_type} ${wifiwhichkey} "${sta_key}" "${wpa_config_tmp}"
		#mv -f $wpa_config_tmp $wpa_config 
	#fi

    ####wifi_ledflash 4
    
    ##gen_wpa_config
    ## 重新启动wpa_supplicant

	show_func "wifi_sta_connect_ex"
    echo "">$tmpfs_path/wifi.disconnect
    if [ ! -z `pidof wpa_supplicant` ]
    then
		show_info "wifi_sta_connect_ex, stop wpa_supplicant"
        wpa_cli -i $wifidev disconnect >>$tmpfs_path/wifi.disconnect 2>&1
        wpa_cli -i $wifidev terminate  >>$tmpfs_path/wifi.disconnect 2>&1
    fi
	
    #ifconfig $wifidev up
	net_up $wifidev 
    show_info "wifi_sta_connect_ex, start wpa_supplicant"
    wpa_supplicant -B -d -D$wpa_driver  -i $wifidev -c $wpa_config_tmp >$tmpfs_path/wifi.connect 2>&1
    ####wpa_cli -i $wifidev reconfigure
	sleep 3
    wpa_cli  -i $wifidev disconnect  >>$tmpfs_path/wifi.disconnect 2>&1
    wpa_cli  -i $wifidev select_network 0 >>$tmpfs_path/wifi.disconnect 2>&1
    wpa_cli  -i $wifidev enable_network 0  >>$tmpfs_path/wifi.disconnect 2>&1

}

#"$wifiessid=$1"
#"$wifikey=$2"
#"$wifikeytype=$3"
wifi_sta_save_info()
{
	TmpFile=/tmpfs/wifi_config_tmp
	#TmpFile=./wifi_config_tmp
	. $wifi_config
	
	###目的是兼容老分支的版本,老版本的wifi配置文件和新分支版本不一样
	isIndexExist=0
	if [ -z "$last_index" ]
	then
		isIndexExist=1
	fi
	
	#replace
	case $1 in
		$wifiessid)
			last_index=0
			wifiessid=wifiessid
			wifikey=wifikey
			wifikeytype=wifikeytype
			;;
		$wifiessid1)
			last_index=1
			wifiessid=wifiessid1
			wifikey=wifikey1
			wifikeytype=wifikeytype1
			;;
		$wifiessid2)
			last_index=2
			wifiessid=wifiessid2
			wifikey=wifikey2
			wifikeytype=wifikeytype2
			;;
		*)
			if [ $group_index -eq 0 ];then
				wifiessid=wifiessid
				wifikey=wifikey
				wifikeytype=wifikeytype
			else
				wifiessid=wifiessid$group_index
				wifikey=wifikey$group_index
				wifikeytype=wifikeytype$group_index
			fi		
			
			last_index=$group_index
			
			group_index=`expr $group_index + 1`
			if [ $group_index -eq 3 ];then
				group_index=0
			fi
			;;
	esac
	
	wifiessid_line=`cat $wifi_config | grep ^$wifiessid= -n | cut -d : -f 1`
	wifikey_line=`cat $wifi_config | grep ^$wifikey= -n | cut -d : -f 1`
	wifikeytype_line=`cat $wifi_config | grep ^$wifikeytype= -n | cut -d : -f 1`
	group_index_line=`cat $wifi_config | grep ^group_index= -n | cut -d : -f 1`
	last_index_line=`cat $wifi_config | grep ^last_index= -n | cut -d : -f 1`
	
    sta_ssid="$wifiessid=\"$1\""
	sta_key="$wifikey=\"$2\""
	sta_key_type="$wifikeytype=$3"
	sta_group_index="group_index=$group_index"
	sta_last_index="last_index=$last_index"
	
	if [ $isIndexExist == 1 ]
	then
		sed  -e "${wifiessid_line}s/^.*$/$sta_ssid/" -e "${wifikeytype_line}s/^.*$/$sta_key_type/"  -e "${wifikey_line}s/^.*$/$sta_key/" $wifi_config > $TmpFile
	else
		sed  -e "${last_index_line}s/^.*$/$sta_last_index/" -e "${group_index_line}s/^.*$/$sta_group_index/" -e "${wifiessid_line}s/^.*$/$sta_ssid/" -e "${wifikeytype_line}s/^.*$/$sta_key_type/"  -e "${wifikey_line}s/^.*$/$sta_key/" $wifi_config > $TmpFile
	fi
	
	sync
	mv $TmpFile $wifi_config
}

get_last_ssid()
{
	sta_ssid=
	. $wifi_config
	###老分支版本机器升级新分支版本时因为没有last_index会导致设备进ap,故在此做个判断
	if [ -z "$last_index" ]
	then
		last_index=0
	fi

	case $last_index in
		0)
			sta_ssid=$wifiessid
		;;
		1)
			sta_ssid=$wifiessid1
		;;
		*)
			sta_ssid=$wifiessid2
		;;
	esac
	
	echo "$sta_ssid"
}

gen_last_wpa_config()
{
	sta_ssid=$(get_last_ssid)
	sta_key=
	sta_key_type=
	
	. $wifi_config
	
	case "$sta_ssid" in
		"$wifiessid")
			sta_key=$wifikey
			sta_key_type=$wifikeytype
			;;
		"$wifiessid1")
			sta_key=$wifikey1
			sta_key_type=$wifikeytype1
			;;
		"$wifiessid2")
			sta_key=$wifikey2
			sta_key_type=$wifikeytype2
			;;
		*)
			echo "err"
			return 
		;;
	esac
	
	gen_wpa_config "${sta_ssid}" $sta_key_type $wifiwhichkey "${sta_key}" "${wpa_config_tmp}"
}

connect_last_sta_ssid()
{
	sta_ssid=$(get_last_ssid)
	
	#检查最新配置的ssid是否在搜索列表中
	sta_ssid_tmp=`cat $wifiscanresult | grep -w "$sta_ssid" | cut -f5 | awk '{print $0}' | head -n 1 `
	if [ -n "$sta_ssid_tmp" ];then
		oldssidlen=`expr length "$sta_ssid"`
		newssidlen=`expr length "$sta_ssid_tmp"`
		##如果找到了,需要再比较长度,长度相同说明真正找到了该ssid
		if [ $oldssidlen == $newssidlen ];then
			echo "$sta_ssid"
			show_info "find curr connect ssid"
		else
			echo ""
			show_info "no match ssid"
		fi;
		
	else
		echo ""
		show_info "The match failed to use the user's current input wifi"
	fi
}

wifi_sta_connect_ap_list()
{
	wifi_scan
	
	. $wifi_config
	
	sta_ssid=$(connect_last_sta_ssid)
	sta_key=
	sta_key_type=
	
	if [ -z "$sta_ssid" ];then
		if [ "$#" -eq 0 ] 
		then
			ssid_index=1
		else
			ssid_index=`expr $1 + 1`
		fi
		
		sta_ssid=`cat $wifiscanresult | grep -E "$wifiessid|$wifiessid1|$wifiessid2" | awk '{print $NF}'  | head -n $ssid_index | tail -n 1`
		
		#如所有sta记录都没有在热点列表中，默认用最新的一组进行连接
		if [ -z "$sta_ssid" ];then
			sta_ssid=$(get_last_ssid)
		fi
	fi
	
	show_info "wifi_sta_connect_ap_list sta_ssid:$sta_ssid"
	
	case "$sta_ssid" in
		"$wifiessid")
			sta_key=$wifikey
			sta_key_type=$wifikeytype
			;;
		"$wifiessid1")
			sta_key=$wifikey1
			sta_key_type=$wifikeytype1
			;;
		"$wifiessid2")
			sta_key=$wifikey2
			sta_key_type=$wifikeytype2
			;;
		*)
			echo "err"
			return 
		;;
	esac
		
	wifi_sta_connect_ex "${sta_ssid}" "${sta_key}" $sta_key_type
	
	echo "ok"
	
}

wifi_sta_connect()
{
    echo "">$tmpfs_path/wifi.disconnect
    ## 重新启动wpa_supplicant
	show_func "wifi_sta_connect"
    echo "">$tmpfs_path/wifi.disconnect
    if [ ! -z `pidof wpa_supplicant` ]
    then
		show_info "wifi_sta_connect, stop wpa_supplicant"
        wpa_cli -i $wifidev disconnect >>$tmpfs_path/wifi.disconnect 2>&1
        wpa_cli -i $wifidev terminate  >>$tmpfs_path/wifi.disconnect 2>&1
    fi
	

	net_up $wifidev 
    show_info "wifi_sta_connect, start wpa_supplicant"
    wpa_supplicant -B -d -D$wpa_driver  -i $wifidev -c $wpa_config >$tmpfs_path/wifi.connect 2>&1
    ####wpa_cli -i $wifidev reconfigure
	#sleep 1
    #wpa_cli  -i $wifidev disconnect  >>$tmpfs_path/wifi.disconnect 2>&1
    #wpa_cli  -i $wifidev select_network 0 >>$tmpfs_path/wifi.disconnect 2>&1
    #wpa_cli  -i $wifidev enable_network 0  >>$tmpfs_path/wifi.disconnect 2>&1
	
}

wifi_sta_disconnect()
{
    wpa_cli -i $wifidev disconnect >$tmpfs_path/wifi.disconnect1 2>&1
}

wifi_fixnet_connect()
{
    ####wifi_ledflash 4
    
    ##gen_wpa_config
    ## 重新启动wpa_supplicant
    echo "">$tmpfs_path/wifi.disconnect
    if [ ! -z `pidof wpa_supplicant` ]
    then
        wpa_cli -i $wifidev disconnect >>$tmpfs_path/wifi.disconnect 2>&1
        wpa_cli -i $wifidev terminate  >>$tmpfs_path/wifi.disconnect 2>&1
    sleep 3
    fi
	#ifconfig $wifidev up
	net_up $wifidev 
    wpa_supplicant -B -d -D$wpa_driver  -i $wifidev -c $fixnet_config >$tmpfs_path/wifi.connect 2>&1    
    
    ####wpa_cli -i $wifidev reconfigure
   
    wpa_cli  -i $wifidev disconnect  >>$tmpfs_path/wifi.disconnect 2>&1
    wpa_cli  -i $wifidev select_network 0 >>$tmpfs_path/wifi.disconnect 2>&1
    wpa_cli  -i $wifidev enable_network 0  >>$tmpfs_path/wifi.disconnect 2>&1
    

}

outputwifiscanresult()
{
    echo -e -n "Content-Type:text/plain\n\r\n\r"
	#rt_llq,解决ssid为 "" 时,js报错
    cat $wifiscanresult | cut -f5 | awk '{print "var ssid_"NR"=\""$0"\";"}' | sed 's/""""/"\\"\\""/'
    cat $wifiscanresult | cut -f3 | awk '{print "var signal_"NR"=\""$1"\";"}'
    cat $wifiscanresult | cut -f4 | awk '{print "var secret_"NR"=\""$1"\";"}'
    #结果中, 有一个\n, 所以不需要再多一个\n cat /tmpfs/wifiaplist  | cut -f5 | awk '{print "var ssid_"NR"=\""$0"\";"}'
    echo -e -n "\r\n\r"  

}

wifi_scan_old()
{
    show_info "wifi_scan"
	########如果正在搜索的则直接返回，以免造成搜索结果相互覆盖。
	if [ -e /tmpfs/wifi_scan ];then
		return ;
	else
		echo "" > /tmpfs/wifi_scan
	fi
	
	wpa_cli -i $wifidev scan > /dev/null 2>&1
    sleep 1
    wpa_cli -i $wifidev scan_result > $tmpfs_path/tmpresult.lst
	echo "">>$tmpfs_path/tmpresult.lst
	sleep 2
	wpa_cli -i $wifidev scan_result > $tmpfs_path/tmpresult.lst
    echo "">>$tmpfs_path/tmpresult.lst

    ##20140429 sort $tmpfs_path/tmpresult.lst -k1 | awk 'BEGIN{print "bssid signal ssid"}{ if ($1!=bss && $1 != "bssid" && $1 != "") {print $0}; bss=$1}' > $wifiscanresult 
    sort $tmpfs_path/tmpresult.lst -k1 | awk 'BEGIN{print "bssid signal ssid"}{ if ($1!=bss && $1 != "bssid" && $1 != "") {print $0}; bss=$1}' > $tmpfs_path/tmpresult2.lst
    sort -r $tmpfs_path/tmpresult2.lst -k3 > $wifiscanresult
    
	rm /tmpfs/wifi_scan -rf
	
	show_info "wifi_scan exit"
}

wifi_scan()
{
    show_info "wifi_scan"
	########如果正在搜索的则直接返回，以免造成搜索结果相互覆盖。
	if [ -e /tmpfs/wifi_scan ];then
		return ;
	else
		echo "" > /tmpfs/wifi_scan
	fi
	
	echo "" > $wifiscanresult
	
	iwlist $wifidev scan > /dev/null 2>&1
    sleep 1
	
    iwlist $wifidev scan > $tmpfs_path/tmpresult.lst
	ret=`cat $tmpfs_path/tmpresult.lst | grep "No scan results" > /dev/null; echo $?`
	if [ $ret"A" == "0A" ];then
		rm $tmpfs_path/tmpresult.lst -rf
	fi
	echo "">>$tmpfs_path/tmpresult.lst
	sleep 1
	
	iwlist $wifidev scan > $tmpfs_path/tmpresult.lst
	ret=`cat $tmpfs_path/tmpresult.lst | grep "No scan results" > /dev/null; echo $?`
	if [ $ret"A" == "0A" ];then
		rm $tmpfs_path/tmpresult.lst -rf
	fi
    echo "">>$tmpfs_path/tmpresult.lst

    ##20140429 sort $tmpfs_path/tmpresult.lst -k1 | awk 'BEGIN{print "bssid signal ssid"}{ if ($1!=bss && $1 != "bssid" && $1 != "") {print $0}; bss=$1}' > $wifiscanresult 
    sort $tmpfs_path/tmpresult.lst -k1 | awk 'BEGIN{print "bssid signal ssid"}{ if ($1!=bss && $1 != "bssid" && $1 != "") {print $0}; bss=$1}' > $tmpfs_path/tmpresult2.lst
    sort -r $tmpfs_path/tmpresult2.lst -k3 > $wifiscanresult
    
	rm /tmpfs/wifi_scan -rf
	
	show_info "wifi_scan exit"
}


wifi_getstatus()
{
    tmpname=$tmpfs_path/wifistatus.$$
    wpa_cli -i $wifidev status 1>$tmpname 2>/dev/null
    ##chmod +x $tmpname
    #. $tmpname
    wpa_state=`cat /tmpfs/wifistatus.$$ | grep wpa_state | cut -d= -f2`
	##COMPLETED ....
    if [ -z $wpa_state ]
    then
        echo "ERROR"
    else
        echo $wpa_state
    fi
    rm $tmpname -f 2>/dev/null
}

wifi_wait_connect()
{

    retry_times=10
    retry_waittimes=4
    cnt=0
    
    ##show_dbg2 "wifi_wait_connect retry_times  $retry_times retry_waittimes $retry_waittimes"
    while [ $cnt -lt $retry_times ]
    do
        linkstatus=$(wifi_getstatus)
        if [ -z $linkstatus ]
        then
            linkstatus=ERROR
            break
        else
             ### 只有COMPLETED 才是链接成功, 可能的值为 SCANNING, ASSOCIATING,SCANNING
             if [ ${linkstatus} = COMPLETED ]
             then
                linkstatus="COMPLETED"
                break
             else
                 sleep $retry_waittimes
                 cnt=`expr $cnt + 1`
             fi
        fi
    done
    echo $linkstatus
}
## return 1 offline
wifi_module_offline()
{
	wifi_online=`/bin/vslocal/cgi-bin/getwifioffline.sh`
	echo $wifi_online
}

wifi_getenable()
{
    wifienable=0
    if [ -e $wifi_config ]
    then
        #get wifienable 
        . $wifi_config
        
    else
        wifienable=0
    fi
    
    wifi_offline=$(wifi_module_offline)
    if [ $wifi_offline == 1 ]
    then
        echo -1
    else
        echo $wifienable
    fi
    ##ifconfig ra0 >$tmpfs_path/ra0status 2>&1
    ##ra0status=$?
    ##if [ $ra0status = 1 ]
    ##then
    ##    echo -1
    ##else
    ##    echo $wifienable
    ##fi
}



###BTTODO, get ap config from config file
wifi_ap_ipcfg()
{
    killall -9 udhcpc
    killall -9 udhcpd
    killall -9 dnsd
	
    
    show_info "AP ip config as $ap_ip"
	hostapd_conf=$tmpfs_path/hostapd.conf
	mkdir -p /var/run/hostapd
	#wifi_module_type=`/bin/vslocal/cgi-bin/getwifimoduletype.sh`
	if [ $wifi_module_type == "7601" ]
	then
		ap_ssid=`cat $tmpfs_path/RT2870AP.dat | grep SSID -w | cut -d= -f2`
	elif [ $wifi_module_type == "8189" ]
	then
		ap_ssid=`cat /etc/network/wifi8189ap.conf | grep SSID -w | cut -d= -f2`
	else
		show_error "unknow wifi_module_type $wifi_module_type "
	fi
	
	ap_chn=1
	if [ $ap_ssid"A" == "A" ];then
		ap_ssid="IPCAM-AP"
	fi
	echo "interface=$wifidev" > $hostapd_conf
	echo "ctrl_interface=/var/run/hostapd" >> $hostapd_conf
	echo "driver=nl80211" >> $hostapd_conf
	echo "hw_mode=g" >> $hostapd_conf
	echo "channel=$ap_chn" >> $hostapd_conf
	echo "ssid=$ap_ssid"  >> $hostapd_conf
	echo "beacon_int=100" >>  $hostapd_conf
	echo "dtim_period=2" >>   $hostapd_conf
	echo "max_num_sta=5" >>   $hostapd_conf
	
	wifiap_conf=/etc/network/wifiap.conf
	authMode=`cat $wifiap_conf | grep auth_mode | cut -d "=" -f2`
	if [ $authMode"A" == "WPA2PSK""A" ];then
		echo wpa=2 >> $hostapd_conf 
		echo wpa_key_mgmt=WPA-PSK  >> $hostapd_conf
		echo wpa_pairwise=CCMP  >> $hostapd_conf
		wpaPsk=`cat $wifiap_conf | grep wpa_psk | cut -d "=" -f2`
		echo wpa_passphrase=$wpaPsk >> $hostapd_conf
	fi
	
    hostapd $hostapd_conf -d -B
    ifconfig $wifidev $ap_ip netmask $ap_mask
    #ifconfig $wifidev up
	net_up $wifidev 
    route add default gw $ap_gateway dev $wifidev
    route add -net 239.0.0.0 netmask 255.0.0.0 $wifidev 2>/dev/null
    udhcpd -S
    dnsd -d
    . $mac_lined_file
	#$1 NETTYPE    #$2 IP     #$3 MASK     #$4 GW    #$5 MAC    #$6 DHCPFlag    #$7 DNSFlag(null for get from ifattr)
    net_cache $wifidev $ap_ip $ap_mask $ap_gateway $macaddress "0" "specify"
    /bin/vs/mcast.sh 5 &
    
	wifi_scan
	
    #BT#if [ ! -e $ip_cache1 ]
    #BT#then
    #BT#    . $ip_config 
    #BT#    . $mac_lined_file
    #BT#    if [ $dhcp = "n" ]
    #BT#    then
    #BT#        net_cache $wifidev $address $netmask $gateway $macaddress "0" "0"
    #BT#    else
    #BT#        net_cache $wifidev $address  $netmask $gateway $macaddress "1" "1"
    #BT#    fi
    #BT#    #$1 NETTYPE    #$2 IP     #$3 MASK     #$4 GW    #$5 MAC    #$6 DHCPFlag    #$7 DNSFlag    
    #BT#fi
    
}

ap_name_set_7601()
{
	APSSID=$1

	APFile="/etc/Wireless/RT2870AP/RT2870AP.orig.dat"
    TmpFile="$tmpfs_path/RT2870AP.dat"
    APFileLink="/etc/Wireless/RT2870AP/RT2870AP.dat"
   
    SSIDLine=`cat $APFile | grep ^SSID= -n | cut -d : -f 1`
    #SSID=`cat $APFile | grep ^SSID= -n | cut -d : -f 2`
	
    #SSID="SSID=IPCAM-AP-"$P2P_ID
    SSID="SSID=$APSSID"
    show_info "AP SSID=$APSSID"
    sed "${SSIDLine}s/^.*$/$SSID/" $APFile > $TmpFile
        
    if [ -e $APFileLink ]
    then
        echo "$APFileLink Exist"
        if [ ! -L $APFileLink ]
        then
            echo "$APFileLink Exist. not link"
            rm -f $APFileLink
            ln -s $TmpFile $APFileLink
        fi
    else
            echo "$APFileLink Not Exist"
            ln -s $TmpFile $APFileLink
    fi
}

ap_name_set_8189()
{
	show_func "ap_name_set_8189 apname = $1"
	APSSID=$1
	APFile="/etc/network/wifi8189ap.conf"
	
	SSID="SSID=$APSSID"

	echo $SSID > $APFile
	
}

ap_ssid_update()
{
#####get_ap_ssid在ap_ssid.sh实现
	APSSID=$(get_ap_ssid)
	if [ $APSSID"A" = "null""A" ];then ###未烧录UID显示,默认前缀
		APSSID="IPCAM"
	fi
	
	#根据wifi类型区分设置
	#wifi_module_type=`/bin/vslocal/cgi-bin/getwifimoduletype.sh`
	if [ $wifi_module_type == "7601" ]
	then
		ap_name_set_7601 $APSSID
	elif [ $wifi_module_type == "8189" ]
	then		
		ap_name_set_8189 $APSSID
	else
		show_info "unknow wifi_module_type $wifi_module_type"
	fi

}

wifi_ap_start()
{
    ###AP模式下反复进入时得先stop
	wifiM=`cat /tmpfs/wifimode`
	if [ $wifiM == "AP" ];then
		wifi_ap_stop
	fi
	show_func "wifi_ap_start"
    wifiko_ap load
    wifi_setmode "AP"
	
	#声音播放去掉
	#wifi_audio_to_ap
	
	# 二维码扫描去掉
	#if [ $customernum != "123" ];then
	#    /bin/vslocal/cgi-bin/netqrcodescan.sh &	
	#fi
}

wifi_ap_stop()
{
	sleep 3
	show_func "wifi_ap_stop"
	killall -9 hostapd
    #ifconfig $wifidev down
	net_down $wifidev 
    wifiko_ap unload
    wifi_setmode NONE
	killall netqrcodescan.sh
}

### 加载STA
wifi_sta_start()
{
	killall -9 wpa_supplicant 
	killall -9 hostapd
    show_func "wifi_sta_start"
    wifiko load   
    wifi_setmode "STA"

    wpa_supplicant -B -d -D$wpa_driver  -i $wifidev -c $wpa_config >$tmpfs_path/wifi.connect 2>&1 
    #ifconfig $wifidev up
	net_up $wifidev 
	echo "wifimac=`cat /sys/class/net/${wifidev}/address`" > $mac_wifi_file
}


wifi_sta_stop()
{
    show_func "wifi_sta_stop"
    killall -9 wpa_supplicant
    #ifconfig $wifidev down
	net_down $wifidev 
    wifiko unload
    wifi_setmode NONE
}

wifi_fixnet_start()
{
    show_func "wifi_fixnet_start"
    wifiko load   
    wifi_setmode "FIXNET"
    sleep 1
    wpa_supplicant -B -d -D$wpa_driver  -i $wifidev -c $fixnet_config >$tmpfs_path/wifi.connect 2>&1        
    #ifconfig $wifidev up
	net_up $wifidev 
}


wifi_fixnet_stop()
{
    show_func "wifi_fixnet_stop"
    killall -9 wpa_supplicant
    #ifconfig $wifidev down
	net_down $wifidev 
    wifiko unload
    wifi_setmode NONE
}

### 加载smart link
wifi_smtcn_start()
{
    show_func "wifi_smtcn_start"
 #   wifiko load   
    wifi_setmode "SMTCN"

#    sleep 3  
	smtcn_node=`get_smtcn_node`
	show_func "smtcn_node:"$smtcn_node
	
    #ifconfig $wifidev up
	net_up $wifidev 

	##iwpriv $wifidev elian start
	
	if [ -e $smtcn_node ];then
		echo "stop" > $smtcn_node
#		echo "clear" > $smtcn_node
		echo "start" > $smtcn_node
	else
		show_error "Not support SMARTLINK"
	fi
	###/bin/vslocal/cgi-bin/netqrcodescan.sh &	
}


wifi_smtcn_stop()
{
    show_func "wifi_smtcn_stop"
	smtcn_node=`get_smtcn_node`
	
	if [ -e $smtcn_node ];then
		echo "stop" > $smtcn_node
	fi	
	####iwpriv $wifidev elian stop
	###BTTODO. check it need??
    wifiko unload
    wifi_setmode NONE
    killall netqrcodescan.sh
}

wifi_fatcn_stop()
{
    show_func "wifi_fatcn_stop"
	if [ -e /tmpfs/fastlink.conf ];then
		rm /tmpfs/fastlink.conf -rf
	fi	
	
	killall fastlink
}
###BTTODO, start with wpa_cli
wifi_wps_start()
{
    show_func "wifi_wps_start"
	#ifconfig $wifidev up
	net_up $wifidev 
	wpa_cli -i $wifidev remove_network 0
	wpa_cli -i $wifidev remove_network 1
	wpa_cli -i $wifidev wps_pbc		
}

###wifi_stop()
###{
###    #ifconfig $wifidev 0.0.0.0
###	net_off $wifidev 
###}
###
wifi_stopall()
{
    show_dbg2 "wifi_stop all"
    wifi_sta_stop
    wifi_ap_stop
	wifi_smtcn_stop
}


wifi_wpsOK()
{
    wpa_cli -i $wifidev status > $tmpfs_path/wifistatus.$$
    chmod +x $tmpfs_path/wifistatus.$$
    ###. $tmpfs_path/wifistatus.$$   ###这个是以前老的获取ssid的方式现在屏蔽

    wpa_cli save_config
    ###目前测试发现wps只有使用WPA加密NONE才能使用,wps连接成功后会在/tmpfs/下生产一个wpa_supp.conf文件
    ###以前方式取ssid会因为带空格获取不到完整的ssid字符串,现在将ssid截图加双引号写入文件再获取才能获取到完整的带空格的字符串

    ssidtmp="`cat $tmpfs_path/wifistatus.$$ | grep ssid= | sed '1d,$d' | cut -d "=" -f2`"
    keytmp=`cat /tmpfs/wpa_supp.conf | grep "psk=" | cut -d "=" -f2`
   
    echo "ssid_tmp=\"${ssidtmp}\"" >>  /tmpfs/wifi_tmp
    echo "key_tmp=${keytmp}" >>  /tmpfs/wifi_tmp
    . /tmpfs/wifi_tmp
	
    wifiessid=$ssid_tmp
    wifikeytype=3
    wifikey=$key_tmp
	
    #wifi_sta_save_info "${wifiessid}" "${wifikey}" ${wifikeytype}
    rm /tmpfs/wifi_tmp		
	
    #ssid get from wifistatus.$$
    #wifiessid=$ssid
    #wifiwhichkey=
    #wifikeytype=
    #wifikeyold=
    #wifikey=
    #enable=1
    cat $wifidev_config > $wifi_config_tmp
    echo "wifidev=\"${wifidev}\"" >> $wifi_config_tmp
    echo "wifienable=\"${enable}\"" >> $wifi_config_tmp
    echo "wifiessid=${wifiessid}" >> $wifi_config_tmp
    echo "wifikeytype=$wifikeytype" >> $wifi_config_tmp
    echo "wifiwhichkey=$wifiwhichkey" >> $wifi_config_tmp
    echo "wifikey=\"$wifikey\"" >> $wifi_config_tmp

    rm -f $wifi_config
    cp -f $wifi_config_tmp  $wifi_config
    ## when WPS, default dhcp
    setinetattr.cgi "cmd=aa&-dhcp=on&-dnsstat=1"
    sync
}


SMTCN_TLV_TYPE=""
SMTCN_TLV_LENGHT=""
SMTCN_TLV_VALUE=""

get_tlv_value()
{
	TLV_HEX=$1
	SMTCN_TLV_TYPE=""
	SMTCN_TLV_LENGHT=""
	SMTCN_TLV_VALUE=""

	SMTCN_TLV_TYPE=`echo $TLV_HEX | cut -f1 -d-`
	LENGHT1=`echo $TLV_HEX | cut -f2 -d-`
	SMTCN_TLV_LENGHT=`printf "%d"  "0x"$LENGHT1`
		
	if [ $SMTCN_TLV_LENGHT == "2" ];then
		return ;
	fi
		
	RepeatCnt=3
	while [ 1 ]
	do
		if [ $RepeatCnt -gt $SMTCN_TLV_LENGHT ];then
			break
		fi
		
		TLV_VALUE="0x"`echo $TLV_HEX | cut -f$RepeatCnt -d-`
		SMTCN_TLV_VALUE=$SMTCN_TLV_VALUE`echo $TLV_VALUE | num2char `
		RepeatCnt=$(( $RepeatCnt + 1 ))
		
	done
}

GET_SMTCN_WKTYPE()
{
	SMTCN_SSID=$1
	SMTCN_WKTYPE="3"
	SMTCN_SSID_LEN="${#SMTCN_SSID}"
	
	echo "3" > /tmpfs/smtcn_wktype
	
	cat $wifiscanresult | while read line
	do
		RESULT_SSID=`echo $line | grep "\<${SMTCN_SSID}\>" | awk '{print $5}'`
		if [ "A""${RESULT_SSID}" == "A" ]
		then
			continue
		fi
		
		RESULT_SSID_LEN="${#RESULT_SSID}"
		
		if [ "$SMTCN_SSID_LEN" == "$RESULT_SSID_LEN" ]
		then
			RESULT_WKTYPE=`echo $line | awk '{print $4}' | grep WPA`
			if [ ! -z $RESULT_WKTYPE ];then
				####wpa
				SMTCN_WKTYPE="3"
				echo "3" > /tmpfs/smtcn_wktype
			else
				RESULT_WKTYPE=`echo $line | awk '{print $4}' | grep [ESS]`
				if [ ! -z $RESULT_WKTYPE ] && [ $RESULT_WKTYPE == "[ESS]" ];then
				####no password
					SMTCN_WKTYPE="1"
					echo "1" > /tmpfs/smtcn_wktype
				else
				####wep
					SMTCN_WKTYPE="2"
					echo "2" > /tmpfs/smtcn_wktype
				fi
			fi
			break;
		fi
	done
	
	cat /tmpfs/smtcn_wktype
	
	rm /tmpfs/smtcn_wktype -rf > /dev/null
}


wifi_smtcnOK()
{
	smtcn_node=`get_smtcn_node`
	
	if [ ! -e $smtcn_node ];then
		return "1";
	fi
	
	cat $smtcn_node
	
	SMTCN_SSID=`cat $smtcn_node | awk -F ", " '{printf $2}' | awk -F "=" '{printf $2}'`
	SMTCN_PASSWORD=`cat $smtcn_node  | awk -F ", " '{printf $3}' | awk -F "=" '{printf $2}'`
####SMTCN_AUTHMODE=`cat $smtcn_node  |  grep AUTHMODE | awk -F ": " '{printf $2}'`
	SMTCN_TLV_HEX=`cat $smtcn_node  |  grep TLV_HEX | awk -F ": " '{printf $2}'`
		
#	if [ -z $SMTCN_TLV_HEX ];then
#		show_info "SMTCN_TLV_VALUE not set $smtcn_chk!!!!!!!!!!!"
#		return "1";
#	fi	
#
#	get_tlv_value $SMTCN_TLV_HEX
#	show_info "TLV_HEX:"$SMTCN_TLV_HEX" SMTCN_TLV_TYPE:"$SMTCN_TLV_TYPE" SMTCN_TLV_LENGHT:"$SMTCN_TLV_LENGHT" SMTCN_TLV_VALUE:"$SMTCN_TLV_VALUE
#	
#	if [ -z $SMTCN_TLV_VALUE ];then
#		show_info "SMTCN_TLV_VALUE not set $smtcn_chk!!!!!!!!!!!"
#		return "1";
#	fi
	
	. $wifi_config
	
#	if [ -z $smtcn_chk ];then
#		smtcn_chk="RUNTOP"
#	fi
#	
#	show_info "smtcn_chk:"$smtcn_chk" SMTCN_TLV_VALUE:"$SMTCN_TLV_VALUE
#	
#	if [ $SMTCN_TLV_VALUE != $smtcn_chk ];then
#		show_info "SMTCN_TLV_VALUE not set $smtcn_chk!!!!!!!!!!!"
#		return "1";
#	fi
	
	

####根据之前搜索到wifi列表，找出SSID对应的加密类型	
#	SMTCN_WKTYPE="3"
#	RESULT_SSID=`cat $wifiscanresult | grep "\<${SMTCN_SSID}\>" | cut -f5`
#	if [ "${RESULT_SSID}""A" != "A" ];then
#		RESULT_WKTYPE=`cat $wifiscanresult | grep "${SMTCN_SSID}" | cut -f4 | grep WPA`
#		if [ ! -z $RESULT_WKTYPE ];then
#			####wpa
#			SMTCN_WKTYPE="3"
#		else
#			RESULT_WKTYPE=`cat $wifiscanresult | grep "${SMTCN_SSID}" | cut -f4 | grep [ESS]`
#			if [ ! -z $RESULT_WKTYPE ] && [ $RESULT_WKTYPE == "[ESS]" ];then
#			####no password
#				SMTCN_WKTYPE="1"
#			else
#			####wep
#				SMTCN_WKTYPE="2"
#			fi
#		fi
#	fi
	SMTCN_WKTYPE=`GET_SMTCN_WKTYPE "$SMTCN_SSID"`
	show_info "SSID:"$SMTCN_SSID" PASSWORD:"$SMTCN_PASSWORD" WKTYPE:"$SMTCN_WKTYPE
	wifi_sta_save_info "${SMTCN_SSID}" "${SMTCN_PASSWORD}" ${SMTCN_WKTYPE}
	
	#cat $wifidev_config > $wifi_config_tmp
	#cat $wifidev_config > $wifi_config_tmp
	#echo "wifidev=\"${wifidev}\"" >> $wifi_config_tmp
	#echo "wifienable=\"1\"" >> $wifi_config_tmp
	#echo "wifiessid=\"${SMTCN_SSID}\"" >> $wifi_config_tmp
	#echo "wifikeytype=${SMTCN_WKTYPE}" >> $wifi_config_tmp
	#echo "wifiwhichkey=$wifiwhichkey" >> $wifi_config_tmp
	#echo "wifikey=\"${SMTCN_PASSWORD}\"" >> $wifi_config_tmp
	#
	#cat $wifi_config_tmp  > $wifi_config
	#gen_wpa_config "${SMTCN_SSID}" $SMTCN_WKTYPE $wifiwhichkey "${SMTCN_PASSWORD}" $wpa_config_tmp
	#
	#cp -f $wpa_config_tmp $wpa_config
	wifi_smtcn_stop	
	
	return "0"
}


wifi_voiceOK()
{
	if [ ! -e /tmpfs/voice_wifi ];then
		return "1";
	fi
	
	cat /tmpfs/voice_wifi
	
	SMTCN_SSID=`cat /tmpfs/voice_wifi  |  grep SSID | awk -F ": " '{printf $2}'`
	SMTCN_PASSWORD=`cat /tmpfs/voice_wifi  |  grep PASSWORD | awk -F ": " '{printf $2}'`
####SMTCN_AUTHMODE=`cat /tmpfs/voice_wifi  |  grep AUTHMODE | awk -F ": " '{printf $2}'`
	SMTCN_TLV_HEX=`cat /tmpfs/voice_wifi  |  grep TLV_HEX | awk -F ": " '{printf $2}'`
		
#	if [ -z $SMTCN_TLV_HEX ];then
#		show_info "SMTCN_TLV_VALUE not set $smtcn_chk!!!!!!!!!!!"
#		return "1";
#	fi	
#
#	get_tlv_value $SMTCN_TLV_HEX
#	show_info "TLV_HEX:"$SMTCN_TLV_HEX" SMTCN_TLV_TYPE:"$SMTCN_TLV_TYPE" SMTCN_TLV_LENGHT:"$SMTCN_TLV_LENGHT" SMTCN_TLV_VALUE:"$SMTCN_TLV_VALUE
#	
#	if [ -z $SMTCN_TLV_VALUE ];then
#		show_info "SMTCN_TLV_VALUE not set $smtcn_chk!!!!!!!!!!!"
#		return "1";
#	fi
	
	. $wifi_config
	
#	if [ -z $smtcn_chk ];then
#		smtcn_chk="RUNTOP"
#	fi
#	
#	show_info "smtcn_chk:"$smtcn_chk" SMTCN_TLV_VALUE:"$SMTCN_TLV_VALUE
#	
#	if [ $SMTCN_TLV_VALUE != $smtcn_chk ];then
#		show_info "SMTCN_TLV_VALUE not set $smtcn_chk!!!!!!!!!!!"
#		return "1";
#	fi
	
	

####根据之前搜索到wifi列表，找出SSID对应的加密类型	
#	SMTCN_WKTYPE="3"
#	RESULT_SSID=`cat $wifiscanresult | grep "\<${SMTCN_SSID}\>" | cut -f5`
#	if [ "${RESULT_SSID}""A" != "A" ];then
#		RESULT_WKTYPE=`cat $wifiscanresult | grep "${SMTCN_SSID}" | cut -f4 | grep WPA`
#		if [ ! -z $RESULT_WKTYPE ];then
#			####wpa
#			SMTCN_WKTYPE="3"
#		else
#			RESULT_WKTYPE=`cat $wifiscanresult | grep "${SMTCN_SSID}" | cut -f4 | grep [ESS]`
#			if [ ! -z $RESULT_WKTYPE ] && [ $RESULT_WKTYPE == "[ESS]" ];then
#			####no password
#				SMTCN_WKTYPE="1"
#			else
#			####wep
#				SMTCN_WKTYPE="2"
#			fi
#		fi
#	fi
	SMTCN_WKTYPE=`GET_SMTCN_WKTYPE "$SMTCN_SSID"`
	show_info "SSID:"$SMTCN_SSID" PASSWORD:"$SMTCN_PASSWORD" WKTYPE:"$SMTCN_WKTYPE
	wifi_sta_save_info "${SMTCN_SSID}" "${SMTCN_PASSWORD}" ${SMTCN_WKTYPE}
	
	#cat $wifidev_config > $wifi_config_tmp
	#cat $wifidev_config > $wifi_config_tmp
	#echo "wifidev=\"${wifidev}\"" >> $wifi_config_tmp
	#echo "wifienable=\"1\"" >> $wifi_config_tmp
	#echo "wifiessid=\"${SMTCN_SSID}\"" >> $wifi_config_tmp
	#echo "wifikeytype=${SMTCN_WKTYPE}" >> $wifi_config_tmp
	#echo "wifiwhichkey=$wifiwhichkey" >> $wifi_config_tmp
	#echo "wifikey=\"${SMTCN_PASSWORD}\"" >> $wifi_config_tmp
	#
	#cat $wifi_config_tmp  > $wifi_config
	#gen_wpa_config "${SMTCN_SSID}" $SMTCN_WKTYPE $wifiwhichkey "${SMTCN_PASSWORD}" $wpa_config_tmp
	#
	#cp -f $wpa_config_tmp $wpa_config
	#rm /tmpfs/voice_wifi
	
	return "0"
}

wifi_fatcnOK()
{
	if [ ! -e /tmpfs/fastlink.conf ];then
		return ;
	fi
	
	FATCN_SSID=`cat /tmpfs/fastlink.conf  |  grep SSID | awk -F ": " '{printf $2}'`
	FATCN_PASSWORD=`cat /tmpfs/fastlink.conf  |  grep PASSWORD | awk -F ": " '{printf $2}'`
	FATCN_AUTHMODE=`cat /tmpfs/fastlink.conf  |  grep AUTHMODE | awk -F ": " '{printf $2}'`
	
	if [ $FATCN_AUTHMODE == "0" ];then
########no password	
		FATCN_WKTYPE="1"
	elif [ $FATCN_AUTHMODE == "1" ]||[ $FATCN_AUTHMODE == "1" ];then
########wep		
		FATCN_WKTYPE="2"
	else
########wpa
		FATCN_WKTYPE="3"
	fi
	
	show_info "SSID:"$FATCN_SSID" PASSWORD:"$FATCN_PASSWORD" WKTYPE:"$FATCN_WKTYPE
	wifi_sta_save_info ${FATCN_SSID} ${FATCN_PASSWORD} ${FATCN_WKTYPE}
	
	#. $wifi_config
	#
	#cat $wifidev_config > $wifi_config_tmp
	#cat $wifidev_config > $wifi_config_tmp
	#echo "wifidev=\"${wifidev}\"" >> $wifi_config_tmp
	#echo "wifienable=\"1\"" >> $wifi_config_tmp
	#echo "wifiessid=\"${FATCN_SSID}\"" >> $wifi_config_tmp
	#echo "wifikeytype=${FATCN_WKTYPE}" >> $wifi_config_tmp
	#echo "wifiwhichkey=$wifiwhichkey" >> $wifi_config_tmp
	#echo "wifikey=\"${FATCN_PASSWORD}\"" >> $wifi_config_tmp
	#
	#cat $wifi_config_tmp  > $wifi_config
	#
	#gen_wpa_config $FATCN_SSID $FATCN_WKTYPE $wifiwhichkey $FATCN_PASSWORD $wpa_config_tmp
	#cp -f $wpa_config_tmp $wpa_config
}

wifi_fixnetOK()
{
	if [ ! -e $fixnet_config ];then
		return ;
	fi
	
	FIXNET_SSID=`cat $fixnet_config | grep "ssid=\"" | awk -F "\"" '{print $2}'`
	FIXNET_PASSWORD=`cat $fixnet_config | grep "#psk" | awk -F "\"" '{print $2}'`
	FIXNET_WKTYPE="3"
	
	show_info "SSID:"$FIXNET_SSID" PASSWORD:"$FIXNET_PASSWORD" WKTYPE:"$FIXNET_WKTYPE
	
	. $wifi_config
	
	cat $wifidev_config > $wifi_config_tmp
	cat $wifidev_config > $wifi_config_tmp
	echo "wifidev=\"${wifidev}\"" >> $wifi_config_tmp
	echo "wifienable=\"1\"" >> $wifi_config_tmp
	echo "wifiessid=\"${FIXNET_SSID}\"" >> $wifi_config_tmp
	echo "wifikeytype=${FIXNET_WKTYPE}" >> $wifi_config_tmp
	echo "wifiwhichkey=$wifiwhichkey" >> $wifi_config_tmp
	echo "wifikey=\"${FIXNET_PASSWORD}\"" >> $wifi_config_tmp
	
	cat $wifi_config_tmp  > $wifi_config
}


####BTTODO, Get From config file
wifi_audio_connectsuccess()
{
	return 
#	CustomNum=`cat /mnt/config/ipcamera/config_devm.ini | grep customernum=  -m1 | cut -d = -f 2 `
	if [ ! -z $CustomNum ] && [ $CustomNum == "47" ] || [ $CustomNum == "123" ] || [ $CustomNum == "44" ];#256044a-qks-mw7 不要任何提示音
	then
		return ;
	fi
	
	if [ ! -e /bin/vs/media/connectsuccess.g711a ]
	then
		show_error "Have no connectsuccess audio"
		return
	else
		wget -O /tmpfs/wifiaudio.log "http://127.0.0.1/web/cgi-bin/hi3510/playaudio.cgi?&-playstate=1&-playfile=connectsuccess"
	fi
	
}
####BTTODO, Get From config file
wifi_audio_connecting()
{
	return
#	CustomNum=`cat /mnt/config/ipcamera/config_devm.ini | grep customernum=  -m1 | cut -d = -f 2 `
	###hdx 225056客户要求摄像头开机无wifi声音提示
	if [ ! -z $CustomNum ] && [ $CustomNum == "56" ] || [ $CustomNum == "47" ] || [ $CustomNum == "123" ] || [ $CustomNum == "44" ];
	then
		return ;
	fi
	
	if [ ! -e /bin/vs/media/connecting.g711a ]
	then
		show_error "Have no connecting audio"
		return
	else
		wget -O /tmpfs/wifiaudio.log "http://127.0.0.1/web/cgi-bin/hi3510/playaudio.cgi?&-playstate=1&-playfile=connecting"
	fi
	
}
####BTTODO, Get From config file
wifi_audio_connectfailure()
{
	return
#	CustomNum=`cat /mnt/config/ipcamera/config_devm.ini | grep customernum=  -m1 | cut -d = -f 2 `
	###hdx 225056客户要求摄像头开机无wifi声音提示
	if [ ! -z $CustomNum ] && [ $CustomNum == "56" ] || [ $CustomNum == "123" ] || [ $CustomNum == "44" ];
	then
		return ;
	fi
	
	if [ ! -e /bin/vs/media/connectfailure.g711a ]
	then
		show_error "Have no connectfailure audio"
		return
	else
		wget -O /tmpfs/wifiaudio.log "http://127.0.0.1/web/cgi-bin/hi3510/playaudio.cgi?&-playstate=1&-playfile=connectfailure"
	fi
	
}
####BTTODO, Get From config file
wifi_audio_waitconnect()
{
	return
#	CustomNum=`cat /mnt/config/ipcamera/config_devm.ini | grep customernum=  -m1 | cut -d = -f 2 `
	###hdx 225056客户要求摄像头开机无wifi声音提示
	if [ ! -z $CustomNum ] && [ $CustomNum == "56" ] || [ $CustomNum == "47" ] || [ $CustomNum == "123" ] || [ $CustomNum == "44" ];
	then
		return ;
	fi
	
	if [ ! -e /bin/vs/media/waitconnect.g711a ]
	then
		show_error "Have no waitconnect audio"
		return
	else
		wget -O /tmpfs/wifiaudio.log "http://127.0.0.1/web/cgi-bin/hi3510/playaudio.cgi?&-playstate=1&-playfile=waitconnect"
	fi	
}
####BTTODO, Get From config file
wifi_audio_to_ap()
{
	return
#	CustomNum=`cat /mnt/config/ipcamera/config_devm.ini | grep customernum=  -m1 | cut -d = -f 2 `
	. $wifi_config
	###hdx 225056客户要求摄像头开机无wifi声音提示
	if [ ! -z $CustomNum ] && [ $CustomNum == "56" ] || [ $CustomNum == "123" ] || [ $CustomNum == "44" ];
	then
		return ;
	fi
	
	if [ ! -e /bin/vs/media/toap.g711a ]
	then
		show_error "Have no to_ap audio"
		return
	else
		wget -O /tmpfs/wifiaudio.log "http://127.0.0.1/web/cgi-bin/hi3510/playaudio.cgi?&-playstate=1&-playfile=toap"       
	fi
}

#$1, 切换模式
#$2, 是否强制切换, 如果不输入, 默认为强制

wifi_modeswitch()
{
    
    if [ -z $1 ]
    then
        wifimode_new=NONE
    else
        wifimode_new=$1
    fi
    
    if [ -z $2 ]
    then
        force=Y
    else
        force=$2
    fi
    
    show_dbg "CurrWifiMode $wifimode_curr switchto $wifimode_new, isforce:$force"
    
    if [ $wifimode_new == $wifimode_curr -a $force = N ]
    then
        show_dbg "same wifimode and not force, do nothing"
        return
    fi
    
	###BTTODO Why
	
    if [ $wifimode_new == "LINED" ]
    then
        show_info "Enter LINED Mode"
        if [ $wifimode_curr == "AP" ]
        then
            wifi_ap_stop
            killall -9 udhcpd 2>/dev/null
            killall -9 dnsd  2>/dev/null
		elif [ $wifimode_curr == "SMTCN" ]
        then
			wifi_smtcn_stop	
		elif [ $wifimode_curr == "FATCN" ]
		then
			wifi_fatcn_stop	
        fi 
		
        wifi_setmode "NONE"
        wifi_setstate "NONE"
        
	elif [ $wifimode_new == "AP" ]
		then
        show_info "Enter AP Mode"
        ap_ssid_update
        if [ $wifimode_curr == "STA" ]
        then
            #ifconfig $wifidev up
			net_up $wifidev 
            wifi_scan
            wifi_sta_stop
		elif [ $wifimode_curr == "FIXNET" ]
        then
            #ifconfig $wifidev up
			net_up $wifidev 
            wifi_scan
            wifi_fixnet_stop
        elif [ $wifimode_curr == "AP" ]
        then
            show_info "Now is AP"
		elif [ $wifimode_curr == "SMTCN" ]
        then
			wifi_smtcn_stop
			wifi_sta_start
			wifi_scan
			wifi_sta_stop
		elif [ $wifimode_curr == "FATCN" ]
        then
			wifi_fatcn_stop
			#ifconfig $wifidev up
			net_up $wifidev 
			wifi_scan
			wifi_sta_stop				
        else
            #wifi_sta_start
            #wifi_scan
            #wifi_sta_stop
			show_info "Enter AP Mode"
        fi      
        wifi_ap_start
        wifi_ap_ipcfg
        wifi_setmode "AP"
        
        
    elif [  $wifimode_new == "STA" ]
    then
        show_info "Enter STA Mode"
        rm $wifiscanresult -f 2>/dev/null
        if [ $wifimode_curr == "AP" ]
        then
            wifi_ap_stop
            wifi_sta_start
        elif  [ $wifimode_curr == "NONE" ]
        then
            wifi_sta_start
	    elif  [ $wifimode_curr == "SMTCN" ]
        then
            wifi_smtcn_stop	
		elif [ $wifimode_curr == "FATCN" ]
        then
			wifi_fatcn_stop
		elif [ $wifimode_curr == "FIXNET" ]
        then
			wifi_sta_start
		elif [ $wifimode_curr == "STA" ]
        then
			wifi_sta_connect
        fi		
		
		#elif [ $wifimode_curr == "WPS" ]
        #then
		#	wpa_cli -i $wifidev reconfig
        #fi		
        wifi_setmode "STA"
        #wifi_sta_connect
        wifi_setstate STA_CONNECTING  
    elif [  $wifimode_new == "WPS" ]
    then
        show_info "enter WPS mode"
                        
        if [ $wifimode_curr == "AP" ]
        then
            wifi_ap_stop
            wifi_sta_start
        elif [ $wifimode_curr == "NONE" ]
        then
            wifi_sta_start
		elif [ $wifimode_curr == "SMTCN" ]
        then
            wifi_smtcn_stop
			wifi_sta_start
		elif [ $wifimode_curr == "FATCN" ]
        then
            wifi_fatcn_stop
        fi 
        
		wifi_wps_start
        #wpa_cli -i $wifidev remove_network 0
        #wpa_cli -i $wifidev remove_network 1
        #wpa_cli -i $wifidev wps_pbc		
        
        wifi_setmode WPS
        wifi_setstate WPS_CONNECTING
    
    elif [  $wifimode_new == "SMTCN" ]
    then
    	if [ $wifimode_curr == "SMTCN" ]
        then
            show_info "Now is SMTCN Mode"
			return ;
		fi
		
		if [ $wifimode_curr == "STA" ]
        then
			#ifconfig $wifidev up
			net_up $wifidev 
		elif [ $wifimode_curr == "FIXNET" ]
        then
			#ifconfig $wifidev up
			net_up $wifidev 
		elif [ $wifimode_curr == "AP" ]
		then
			wifi_ap_stop
            		wifi_sta_start
			#ifconfig $wifidev up
			net_up $wifidev 
		elif [ $wifimode_curr == "FATCN" ]
		then
			wifi_fatcn_stop
			#ifconfig $wifidev up
			net_up $wifidev 
		elif [ $wifimode_curr == "NONE" ]
		then
            		wifi_sta_start
			#ifconfig $wifidev up			
			net_up $wifidev 
        	fi   
		
		show_info "Enter SMTCN Mode"
		wifi_scan		
##		wifi_stopall
##		sleep 1
		
        wifi_setmode "SMTCN"
		wifi_smtcn_start
        wifi_setstate SMTCN_CONNECTING  

		wifi_audio_waitconnect
		sleep 3; enter_voice_cfg_wifi_mode.sh
		
	elif [  $wifimode_new == "FATCN" ]
    then
        show_info "Enter FATCN Mode"
        rm $wifiscanresult -f 2>/dev/null
        if [ $wifimode_curr == "AP" ]
        then
            wifi_ap_stop
            wifi_sta_start
        elif  [ $wifimode_curr == "NONE" ]
        then
            wifi_sta_start
	    elif  [ $wifimode_curr == "SMTCN" ]
        then
            wifi_smtcn_stop
			wifi_sta_start			
        fi
		
		killall fastlink
		rm -rf /tmpfs/fastlink.conf
		/bin/vslocal/cgi-bin/fastlink &
        wifi_setmode "FATCN"
        wifi_setstate FATCN_CONNECTING 	
		wifi_audio_waitconnect
	elif [  $wifimode_new == "FIXNET" ]
    then
        show_info "Enter FIXNET Mode"
        rm $wifiscanresult -f 2>/dev/null
        if [ $wifimode_curr == "AP" ]
        then
            wifi_ap_stop
            wifi_fixnet_start
        elif  [ $wifimode_curr == "NONE" ]
        then
            wifi_fixnet_start
	    elif  [ $wifimode_curr == "SMTCN" ]
        then
            wifi_smtcn_stop	
		elif [ $wifimode_curr == "FATCN" ]
        then
			wifi_fatcn_stop
        fi
        wifi_setmode "FIXNET"
		wifi_fixnet_connect
		wifi_setstate FIXNET_CONNECTING
    elif [ $wifimode_new == "NONE" ]
    then
        wifi_ap_stop
        wifi_sta_stop
		wifi_smtcn_stop
        wifi_setmode "NONE" 
    fi
    
}