cyberes
/
wlan2eth
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
wlan2eth/bridge/nat
History
Cyberes a7396a23e4 arp proxy: add hotplug 2023-06-27 11:05:04 -06:00
..
README.md update readme 2023-06-20 13:56:59 -06:00
bridge-lan.sh reorganize, start arp proxy 2023-06-20 10:29:28 -06:00
bridge-reset.sh reorganize, add arp proxy 2023-06-20 12:03:35 -06:00
clone-client-mac.sh reorganize, start arp proxy 2023-06-20 10:29:28 -06:00
get-dhcp-dns.sh reorganize, start arp proxy 2023-06-20 10:29:28 -06:00
get_client_mac_address.sh reorganize, start arp proxy 2023-06-20 10:29:28 -06:00
nat-install.sh reorganize, add arp proxy 2023-06-20 12:03:35 -06:00
run-bridge-nat.sh arp proxy: add hotplug 2023-06-27 11:05:04 -06:00
wlan2eth.service arp proxy: add hotplug 2023-06-27 11:05:04 -06:00

README.md

Use

To bridge your wired client to your WiFi network, simply plug it into the port you specified in ETH_IFACE. Wait a few seconds for the bridge to configure itself and once your client is given the IP 192.168.2.2, you're good to go.

The bridge watches the status of the wired interface and when it is unplugged it will reset itself and wait for reconnection. It waits for its wireless interface to get an IP from DHCP before continuing so if you notice the bridge isn't giving your client an IP, check the bridge's WiFi connection.

The bridge device forwards all ports to your client, except the port specified in ROUTER_SSH_PORT (default is 64535). This is the bridge's SSH server.

To access the bridge over SSH, do ssh [username]@[IP] -P [ROUTER_SSH_PORT]. You can use the command sudo journalctl -b -f -u wlan2eth to view the bridge logs.