Reticulum/Changelog.md at 60d8da843c4fc6c1f12b3be1c13786978a419b6e

57 KiB

Raw Blame History

2024-10-10: RNS β 0.8.3

This release fixes a bug in resource transfer progress calculation, improves RNode error handling, and brings minor improvements to the rncp utility.

Changes

Fixed a bug in resource transfer progress calculations
Added physical layer transfer rate output option to rncp
Added save directory option to rncp
Improved path handling for the fetch-jail option of of rncp
Added error detection for modem communication timeouts on connected RNode devices

Release Hashes

54ddab32769081045db5fe45b27492cc012bf2fad64bc65ed37011f3651469fb rns-0.8.3-py3-none-any.whl
a04915111d65b05a5f2ef2687ed208813034196c0c5e711cb01e6db72faa23ef rnspure-0.8.3-py3-none-any.whl

2024-10-06: RNS β 0.8.2

This release adds several new boards to rnodeconf, fixes a range of bugs and improves transport reliability.

Thanks to @jacobeva, @prusnak and @deavmi who contributed to this release!

Changes

Added support for T-Beam Supreme devices to rnodeconf
Added support for T3S3 devices to rnodeconf
Added support for T-Deck devices to rnodeconf
Added support for new hardware error codes from connected RNodes
Added the ability to control the display on nRF52-based RNodes
Improved resource transfers over very slow links, by adding more suitable MAX_WINDOW cap if link speed is continously below threshold.
Improved rnodeconf flashing so manual resets for some devices are no longer required
Added edge case handling for receiving a link proof after the link had timed out and been closed, but before it having been purged from active links table
Updated supported hardware section of the manual with new boards
Tuned path request timing for roaming instances
Fixed a bug that caused RNS to fail to initialise in Termux on Android
Fixed a bug in RNodeInterface firmware version comparison
Fixed a bug in the serial framing of RNodeMultiInterface
Fixed a bug in sub-interface spawning of RNodeMultiInterface

Release Hashes

db720a727a09c0c9d76288dec5a995a30146e65d6a4c5c034f47fb60a78f4962 rns-0.8.2-py3-none-any.whl
ee412535edba48817551658247fb0c843d17e1c97cad9d2a819a7fc627c5ba28 rnspure-0.8.2-py3-none-any.whl

2024-10-02: RNS β 0.8.1

This release adds BLE support to RNodeInterface, and support for configuring additional options to rnodeconf.

Changes

Added Bluetooth Low Energy support to RNodeInterface
Added RNode battery information to rnstatus output
Added display blanking configuration to rnodeconf
Added NeoPixel intensity configuration to rnodeconf

Release Hashes

f4b6b99b67d6b33b8a4562e5d5d5ac54c76814fff26e6c7a79950b82bd80123f rns-0.8.1-py3-none-any.whl
c2e540b4bf0f272bb51ae3e33a02f9c07f2619746d069d7ed83d88017bf7ea30 rnspure-0.8.1-py3-none-any.whl

2024-09-25: RNS β 0.8.0

This maintenance release improves the interface statistics API, and updates documentation.

Changes

Added additional information to interface statistics
Updated documentation

Release Hashes

fa5ff6d98230693be6805bb9a94585a6f54ec0af9cba15b771d4e676f140dc43 rns-0.8.0-py3-none-any.whl
ba20f688b69ae861c8aced251e10242a358fea15da6c22df10d4fc8846c9bf48 rnspure-0.8.0-py3-none-any.whl

2024-09-24: RNS β 0.7.9

This maintenance release improves transport reliability in certain (rare) cases.

Changes

Added handling of a transport edge-case

Release Hashes

4c20c46df021d366386d497145024396f904666b0de22a92f9e5c937886ea39d rns-0.7.9-py3-none-any.whl
97d26282df929eca732a15523bc9d7f66387a93ffd911e8063c94c3f8f6ad73c rnspure-0.7.9-py3-none-any.whl

2024-09-18: RNS β 0.7.8

This maintenance release adds support for the openCom XL to rnodeconf, fixes a number of bugs, and also includes a few fine-tunings of timing parameters.

Thanks to @liamcottle and @jacobeva for contributing to this release!

Changes

Added interface prioritisation according to reported bitrate
Added support for openCom XL to rnodeconf
Added performance profiler to built-in debugging tools
Tuned link traffic timeouts
Fixed a module import error in AX25KissInterface
Fixed a missing exception on erroneous destination initialisation

Release Hashes

33fb9443e3b327d1a9125baa52d8ec3208a089dda62f749b819e0a94c06730f9 rns-0.7.8-py3-none-any.whl
cdced2adef4ead146239d0510fe2b9d62f69136bcd54b22d1080686fb56f9927 rnspure-0.7.8-py3-none-any.whl

2024-09-09: RNS β 0.7.7

This release adds support for automatic encryption key ratcheting for all packets, not just those sent over Reticulum links. In practical terms, this adds forward secrecy to packets sent with the raw Packet API.

In this release, the ratchets feature must be enabled on a per-destination basis by calling the enable_ratchets method on the relevant destination. In a future release, ratchets may become the default option, but for backwards-compatibility, it is currently optional. For more information, read the API documentation.

Please note! Versions of RNS prior to 0.7.7 will not be able to pass announces for destinations with ratchets enabled! If you use applications that can use ratchets (for example, LXMF version 0.5.0 and up), it is important that you update all transport instances on your network to 0.7.7.

Thanks to @deavmi, @faragher, @jacobeva, @jeremy and @jeremybox for contributing to this release!

Changes

Added key ratchet rotation and signalling
Added ratchet API to documentation
Added initial support for flashing T-Echo devices to rnodeconf
Added remote management config options to example config
Added automtic integration tests to source repository
Fixed a regression that caused RNS not to work on Python versions lower than 3.10
Fixed missing establishment_rate property init on Link objects

Release Hashes

0a3ab6dc82567a19adabe737358daee3002b60beda8ac0bf228f2a0c134ff6d8 rns-0.7.7-py3-none-any.whl
89b33fe9ab923139d3f5d43726d92817642be05a8c9d328c3becfc3c409e4b4b rnspure-0.7.7-py3-none-any.whl

2024-05-18: RNS β 0.7.6

This release adds support for RNodes with multiple radio transceivers, courtesy of @jacobeva. It also brings a number of functionality and performance improvements, and fixes several bugs.

Thanks to @jacobeva, @faragher, @nathmo, @jschulthess and @liamcottle for contributing to this release!

Changes

Added support for RNode Multi interfaces
Added initial support for remote management of Reticulum instances
Improved resource transfer performance for large resources
Improved path rediscovery in topologies with roaming transport nodes
Fixed incorrect TX power limit on Android RNode interfaces
Added ability to fetch remote files to rncp
Added fetch request jail option to rncp
Improved rncp status display output
Added link table statistics to rnstatus
Fixed rnstatus JSON output bug when IFAC was enabled on an interface
Added remote instance interface status to rnstatus
Added ability to query path- and rate-tables on remote instances with rnpath
Added JSON output option to rnpath utility
Added max hops filter to rnpath path-table out
Added link age getter to API
Added request concluded status to API
Fixed invalid resource progress reported in some cases
Fixed rnodeconf failure to set firmware hash for NRF52 boards on macOS
Fixed broken --rom command line option in rnodeconf
Fixed various typos in documentation
Updated documentation with new API functions and features

Release Hashes

683ac87c62fe8a18d88c26bf639f4eeca550cefb11ee8e38d6e724e268cf14fc rns-0.7.6-py3-none-any.whl
f884806624e57b799f588de9289a31d2e0460d35bc4cc5071635de5642d50ad2 rnspure-0.7.6-py3-none-any.whl

2024-05-18: RNS β 0.7.5

This release adds support for AutoInterface on Windows platforms, fixes a number of bugs and adds several new supported boards to rnodeconf. Thanks to @faragher, @jacobeva and @liamcottle who contributed to this release!

Changes

Added support for AutoInterface on Windows
Added support for recursive path resolution for clients on roaming-mode interfaces
Added RAK4631 support to rnodeconf
Added LilyGO T3S3 support to rnodeconf
Added ability to get target and calculated hashes via rnodeconf
Fixed DTR timing making flashing fail on Windows in rnodeconf
Fixed various output and menu bugs in rnodeconf

Release Hashes

99ec876966afdea45fcf164242c8e76c284f9e3edf09fb907638fba76e1324b1 rns-0.7.5-py3-none-any.whl
11156f6301707e4d17ff2ca6d58059bc8ba6fe1bbc4dc3de165dd96dc41ee75f rnspure-0.7.5-py3-none-any.whl

2024-05-05: RNS β 0.7.4

This maintenance release fixes a number of bugs, improves path requests and responses, and adds several useful features and capabilities. Thanks to @cobraPA, @jschulthess, @thiaguetz and @nothingbutlucas who contributed to this release!

Changes

Added support for flashing and autoinstalling Heltec V3 boards to rnodeconf
Added custom EEPROM bootstrapping capabilities to rnodeconf
Added ability to load identities from file to Echo and Link examples
Added ability to specify multicast address type in AutoInterface configuration
Added link getter to resource advertisement class
Improved path response logic and timing
Improved path request timing
Fixed a bug in Link Request proof delivery on unknown hop count paths
Fixed broken link packet routing in topologies where transport packets leak to non-intended instances in the link chain
Fixed typos in documentation

Release Hashes

f5c35f1b8720778eb508b687d66334d01b4ab266b2d8c2bc186702220dcaae29  rns-0.7.4-py3-none-any.whl
9eaa7170f97dad49551136965d3fcc971b56b1c2eda48c24b9ffd58d71daa016  rnspure-0.7.4-py3-none-any.whl

2024-03-09: RNS β 0.7.3

This release adds the ability to specify custom firmware URLs for flashing boards with rnodeconf. Thanks to @attermann who contributed to this release!

Changes

Added ability to specify custom firmware URLs for flashing boards with rnodeconf

Release Hashes

bb24445ae9a3a63d348e4d7fe80b750608f257851b97b38fadab929b7a774bc9 rns-0.7.3-py3-none-any.whl
1b148d013103c35ba9a8e105082ef50686c130676d0a560ed709cb546129287e rnspure-0.7.3-py3-none-any.whl

2024-03-02: RNS β 0.7.2

This maintenance release improves memory consumption, fixes a few bugs, and adds ability to flash new boards with rnodeconf.

Changes

Added ability to flash new boards with rnodeconf, including T3 boards with TCXOs
Improved memory consumption on Transport Instances with many interfaces
Fixed a bug that could cause the on-disk known destinations store to become corrupted

Release Hashes

3ce3ba80d5ae8d19c6b55bd51f44bd4beccbcea31554cb1f0d65428e4587b3d6 rns-0.7.2-py3-none-any.whl
83f914aaba2a8929a8cee95830a847e190197232a0cca4e7b906b15c6bbf8296 rnspure-0.7.2-py3-none-any.whl

2024-02-14: RNS β 0.7.1

This release adds support for RNodes based on SX1262, SX1268 and SX1280 modems, and fixes a number of bugs. Thanks to @jacobeva, who contributed to this release!

Changes

Added support for SX1262, SX1268 and SX1280 based RNodes
Updated rnodeconf to allow flashing T-Beam devices with SX126x chips
Fixed an invalid RSSI offset reference

Release Hashes

8ecfbb42b6a699fd4ac5374ab5640e4bb164e80bb9ab4401ea82da132e497877 rns-0.7.1-py3-none-any.whl
e0ab487305ba1aee2d16044640e7eb72d332bbf51aeb0b8bf984d037a64cb493 rnspure-0.7.1-py3-none-any.whl

2024-01-17: RNS β 0.7.0

This maintenance release fixes a number of bugs. Thanks to @jooray and @jacobeva, who contributed to this release!

Changes

Fixed large resource transfers failing under some conditions
Fixed a potential division by zero
Fixed a missing check on malformed advertisement packets
Fixed a formatting issue in rnprobe
Improved resource timeout calculations

Release Hashes

0dc2abe5373b9afadfba7ec05bf7ddeff659c004aa339a94001ebed5b46f5b47 rns-0.7.0-py3-none-any.whl
97f6e65a20b53bbdccd54b4d2bdaa36dc1712e144a55f40800c63fe7113819a5 rnspure-0.7.0-py3-none-any.whl

2023-12-07: RNS β 0.6.9

This release adds a few convenience functions to the rnid utility, and improves roaming support on Android.

Changes

Added identity import and export in hex, base32 and base64 formats to the rnid utility.
Added better carrier change detection for AutoInterface on Android.

Release Hashes

258daf22cb6e72c6cd04fe94447daedf51dfd968eb2f3370eab9c71ad0898dd0 rns-0.6.9-py3-none-any.whl
3644b64af5b4efd3969172bf0cf95ae1afba6c8ea99ce47d8e49e31a832bbaf8 rnspure-0.6.9-py3-none-any.whl

2023-11-14: RNS β 0.6.8

This maintenance release fixes a single bug.

Bugfixes

Fixed packet receipts not being initialised in time for arriving proofs on fast interfaces

Release Hashes

3ffb01f3f45e35105ea30e60e5e493ba50528df38b4ea62672c9e1c093073b1c rns-0.6.8-py3-none-any.whl
de372814082ef7db59f4b2745b1f22b2ef9d97815190ec16c0596ba20406e0fb rnspure-0.6.8-py3-none-any.whl

2023-11-06: RNS β 0.6.7

This maintenance release improves tranport performance and fixes a logging bug.

Changes

Improved local and remote transport performance by approximately 6x on faster links
Significantly decreased latency over faster links

Bugfixes

Fixed logging an error message when local clients connect while shared instance is still starting up

Release Hashes

c37dd1f59e037841f69ec518deecdae6719f978947de2473f04e7d95247805ac rns-0.6.7-py3-none-any.whl
1e2dcb44ec7271a4d26180db138fc54dce6d0d3cf3f816432d4d6a4b1cf83868 rnspure-0.6.7-py3-none-any.whl

2023-11-04: RNS β 0.6.6

This maintenance release improves transfers over unreliable links and fixes a bug in requests.

Changes

Improved reliability of resource transfers over very slow and unreliable links

Bugfixes

Fixed a bug that could cause requests to timeout prematurely

Release Hashes

b1127745750a43cd7389212d31aa09ccc735ab2d69e3b80bd28874f10082c322 rns-0.6.6-py3-none-any.whl
bf5ba5da4f37b93c14817367952cda63787ec88bbe601e41c13fcbb3fc22b6b6 rnspure-0.6.6-py3-none-any.whl

2023-11-02: RNS β 0.6.5

This release fixes a bug in path rediscovery for shared instance clients.

Bugfixes

Fixed a bug in path rediscovery for shared instance clients

Release Hashes

5d54a5cfebe907c759351357a8f7d771670c895ff57f1325bf7fec42bcb46ba3 rns-0.6.5-py3-none-any.whl
accd2855e18ff06455b9454957388089e293073ec7093c64dee0dc7aa46ecb46 rnspure-0.6.5-py3-none-any.whl

2023-11-02: RNS β 0.6.4

This release fixes a number of bugs that had crept in while adding the new ultra low bandwidth link timing and faster path rediscovery mechanisms.

Changes

Adjusted link timings for better support of very slow mediums
Adjusted bluetooth read timeouts to account for occasional high latency in congested 2.4GHz environments
Added a probe count option to the rnprobe utility.

Bugfixes

Fixed a missing timeout calculation
Fixed a redundant path request on path rediscovery
Fixed missing path state resetting on stale path rediscovery
Fixed a bug that could cause an attribute to be uninitialised

Release Hashes

566c725f68aa154eaca0880c894a39503027bf91714f17691e51d047800444c0 rns-0.6.4-py3-none-any.whl
a3a447fd40bf02fdb982523de0e4e9933e8e4cd4d4bd478254ea7dcac29e3fc1 rnspure-0.6.4-py3-none-any.whl

2023-10-31: RNS β 0.6.3

This release brings a series of under-the-hood reliability improvements and bugfixes. But most notably, Reticulum can now establish links over even ultra low bandwidth mediums, all the way down to 5 bits per second.

Thanks to @jschulthess, who contributed to this release!

Changes

Implemented link establishment on ultra low bandwidth links
Added link quality calculations to RNode interfaces
Added physical layer link stats to Link and Packet classes
Added userspace service documentation to the manual
Improved path rediscovery in quickly changing topographies
Improved shared interface reconnection on service restart
Improved exception handling on interface detachment
Updated formatted print functions

Bugfixes

Fixed a missing USB command definition in the RNode interface driver
Fixed a bug in link error handling that could cause an interface to detach

Release Hashes

1f54d4c6ff7ab7721089cbee6630783765f65efd51312879c0d3e5bee3ceab2f rns-0.6.3-py3-none-any.whl
5a90840f0fc9f1a62a3c37b514fb6222fd701a30024275dae8bcc27e29d40f25 rnspure-0.6.3-py3-none-any.whl

2023-10-07: RNS β 0.6.2

This maintenance release adds the ability to specify the shared instance RPC key in the Reticulum config file, making it possible to use all Reticulum functionality in the terminal on Android.

Changes

Added configuration option to specify shared instance RPC key
Reordered airtime stats in rnstatus
Updated log levels on Android

Bugfixes

Adding missing superclass init on Android interfaces

Release Hashes

a9958ad90f34f344003e18077f7abd3fa85666a39dc0cae8580071820dee13f9 rns-0.6.2-py3-none-any.whl
e68e8837d35d1a07a82c4b0e9db50ceace737a650e6e7e9ce2d9a013fd28f529 rnspure-0.6.2-py3-none-any.whl

2023-10-01: RNS β 0.6.1

This release brings a number of bugfixes, along with useful new mechanisms for ensuring network stability under high, non-constructive and unusual announce load situation.

Changes

Added announce ingress rate control for new and unknown destinations
Added per-interface announce frequency monitoring to the transport engine
Added per-interface announce burst hold queues
Added announce frequency statistics to rnstatus
Added option to sort rnstatus output according to various metrics
Added timeout options to rnprobe
Added ability to drop all paths via a specific transport instance to rnpath
Added new options and features to documentation and manual

Bugfixes

Fixed announce queue not clearing all announces with exceeded retry limit at the same time
Fixed a bug that caused local packet RSSI and SNR cache to get stuck
Fixed output formatting in rncp
Fixed rnid not allowing single-aspect destination names
Fixed a number of typos in the documentation

Release Hashes

461e5cafa7560dcd3ec047141d10f0f48f151c36e1af1d65ec6c65f732cea46a rns-0.6.1-py3-none-any.whl
be6a4a6069f2d050e21582f2cf9d3bb59ed4040a0f07761a540bd752d90ea591 rnspure-0.6.1-py3-none-any.whl

2023-09-21: RNS β 0.6.0

This release brings a few performance improvements, additions to the included utilities, and fixes a number of bugs.

Changes

Added ability to run automatic probe responder on Transport Instances
Improved rnprobe utility
Improved AutoInterface peering on Android devices
Improved Transport performance
Improved path re-discovery when local nodes roam to other network segments
Updated various parts of the documentation

Bugfixes

Fixed missing timeout check in rncp
Fixed missing link status check on Identify() call, which could lead to an unnecessary exception

Release Hashes

88a26b1593e82a628dab96dbe8820548aea0159235f730fa992bf1833db59246 rns-0.6.0-py3-none-any.whl
bcee416e4fb52346d01f6e0c46b1cebf84b127cc516603367fc2ae00a4149fa2 rnspure-0.6.0-py3-none-any.whl

2023-09-19: RNS β 0.5.9

This release brings major efficiency improvements to Channel and Buffer classes, adds a range of usability improvements to the included utilities and fixes a number of bugs.

Changes

Improved Channel sequencing, retries and transfer efficiency
Added adaptive compression to Buffer class
Added rnid examples and documentation to manual
Added silent mode to rncp
Added remote fetch mode to rncp
Added allowed_identities file support to rncp
Added Transport Instance uptime to rnstatus output
Added channel CSMA parameter stats to RNode Interface rnstatus output
Added ability to set custom RNode OLED display address with rnodeconf

Bugfixes

Fixed inadverdent AutoInterface multi-IF deque hit for resource transfer retries
Fixed invalid path for firmware hash generation while using extracted firmware to autoinstall in rnodeconf
Fixed various minor missing error checks
Fixed rnid status output bug

Release Hashes

207ab20bd68bab16b417fbd41a4ecdbcf1e2f6fa553d48df6c8fc181b6e84dac rns-0.5.9-py3-none-any.whl
93f0965567dfc2c43f3d703481fe1a7d7b1b8d0b3837ad41c37f28a8af5c1acc rnspure-0.5.9-py3-none-any.whl

2023-09-14: RNS β 0.5.8

This maintenance release contains a number of usability improvements to Reticulum and related tools.

Changes

Various documentation updates
Improved path-resolution in mixed networks with roaming-mode nodes
Added channel load and airtime stats to rnstatus output

Release Hashes

27ba5cdc4724fc8c7211c3b504f097f6adf47f7b80775e6297e4c4e621ef6348 rns-0.5.8-py3-none-any.whl
1ea1c949763c9478ec48f064f7f7864d9f859101ab91b44400879371f490800f rnspure-0.5.8-py3-none-any.whl

2023-08-14: RNS β 0.5.7

This maintenance release contains a number of bugfixes and quality improvements to Reticulum and related tools.

Changes

Added bytes input to destination hash convenience functions
Fixed possible invalid comparison in link watchdog job
Add option to rnodeconf to set baud rate when flashing
Added better explanation in rnodeconf when flashing fails
Fixed EEPROM dump directory in rnodeconf

Release Hashes

867fbb5c73c2a49a75e1f8f3e9f376b507b683328e26c64d4387acd0cc1dbbc7 rns-0.5.7-py3-none-any.whl
7bab2865264b32208e023b5c4bbe88c37f51e3176ca4a8cf332d95f59a6d7f2c rnspure-0.5.7-py3-none-any.whl

2023-07-09: RNS β 0.5.6

This maintenance release contains a few bugfixes.

Changes

Fixed an issue in rnodeconf that prevented Heltec LoRa32 v2 boards from being flashed.
Fixed a typo in the rnid utility.

Release Hashes

255a5b4bac28326c6b2cc85f43b26dcb0606404a4abd2dfa8244937155838973 rns-0.5.6-py3-none-any.whl
1510b6da4641ceaa4c599a142e498c7e2c1ae12035868f9db1c111e5600161e9 rnspure-0.5.6-py3-none-any.whl

2023-06-13: RNS β 0.5.5

This maintenance release brings a single bugfix.

Changes

Fixed a race condition for link initiators on timed out link establishments.

Release Hashes

4ae61d28bf981a7cb853c179e9de3b56b350d2dc984fb671a21d38c4ce5b449e rns-0.5.5-py3-none-any.whl
ed417cbd3c90e9f1b68565a3411ca5c9bc936b495300fd1ace3c4a6414aabd5a rnspure-0.5.5-py3-none-any.whl

2023-05-19: RNS β 0.5.4

This maintenance release brings a single bugfix.

Changes

Fixed a potential race condition when timed-out link receives a late establishment proof a few milliseconds after it has timed out.

Release Hashes

71b42fe737da97a4b63bb227c29bb67854a7f003c9585f085b0ff68c8f460815 rns-0.5.4-py3-none-any.whl
af6949d581445444f57cfca75756200e7c509a6fc66483d859716ce6a06064db rnspure-0.5.4-py3-none-any.whl

2023-05-19: RNS β 0.5.3

This maintenance release brings a single, but important bugfix.

Changes

Fixed a bug that could cause data corruption to occur over when using Buffer instances.

Release Hashes

f23c8d655c9e80a12a6728495aec56f19f27184d3d8e6b6ed6184b0e89d4be35 rns-0.5.3-py3-none-any.whl
2c692a2153bb766a9dc2391340a06f429c13a75b86b746b69c6fcd5a4fe5ee33 rnspure-0.5.3-py3-none-any.whl

2023-05-12: RNS β 0.5.2

This maintenance release brings a number of bugfixes and improvements.

Important! This release breaks backwards compatibility with Channel and Buffer for all previous releases, due to the addition of compression and windowing.

Changes

Added ability to trust external signing keys to rnodeconf
Added basic windowing to Channel and Buffer, improving performance over faster links
Added per-packet compression to Channel
Added automatic multi-interface duplicate deque to AutoInterface
Fixed received link packet proofs not resetting link watchdog stale timer
Fixed a missing exception isolation of packet delivery callbacks
Fixed resent packets not getting repacked

Release Hashes

f3b1e9cf39420ad74c2b5c81ad339fd2a548320c9f6925bad9b614feb4c9b9d7 rns-0.5.2-py3-none-any.whl
8463f7365f179d02e7e4d4fe4afc69da4218ce40107305dfd06b9e6b29513e0f rnspure-0.5.2-py3-none-any.whl

2023-05-05: RNS β 0.5.1

This maintenance release brings a number of bugfixes and improvements. Thanks to @VioletEternity, who contributed to this release!

Changes

Removed dependency on netifaces module
Added ability to configure RNode display intensity to rnodeconf
Added preliminary rnodeconf flasher/autoinstaller support for T3 v1.0 boards
Fixed a bug that caused AutoInterface discovery scopes to fail
Fixed rnodeconf firmware extraction for unverifiable devices
Improved setting rnsd verbosity from command line
Improved support for shared instances on Windows
Improved rnodeconf support on Windows
Improved rnodeconf zip-file handling
Fixed a potentail race condition in announce queue handling for AutoInterface
Various minor bugfixes

Release Hashes

01d76e03f93e427d9c0b95ab5d07e84ed39047e912b8afa6d619a65ac6b5e05b rns-0.5.1-py3-none-any.whl
2cfe431bec1160410b80bbcbf87eb2ab0d5abe5c6546f41eaf3f0f5faf9b2140 rnspure-0.5.1-py3-none-any.whl

2023-03-08: RNS β 0.5.0

This release brings two major new additions to the Reticulum API: The Channel and Buffer classes, that provides reliable delivery, and streams over Reticulum. Thanks to @acehoss, @erethon, @gdt and @faragher, who contributed to this release!

Changes

Added the Buffer class to the API
Added the Channel class to the API
Improved error messages for offline RNode flashing
Improved RNode reconnection when serial device disappears
Fixed embedded scope identifier handling for AutoInterface on BSD
Fixed AutoInterface not ignoring lo0 on BSD
Fixed a bug causing JSON output from rnstatus to fail
Fixed invalid installation of test suite into root module path
Added EPUB version of the documentation
Updated documentation

Release Hashes

0aaf8c0b0b58f07071de5ecd432f4d9cc176b9614419c828b81ad71aa7151624 rns-0.5.0-py3-none-any.whl
f310a5192c2df7665339c5998ae13815a647283af75b95ad7acbee8c20989954 rnspure-0.5.0-py3-none-any.whl

2023-02-17: RNS β 0.4.9

This maintenance release contains a number of bugfixes and minor improvements, along with a few additions to the API.

Changes

Added JSON output mode to rnstatus
Added Link ID to response_generator callback
Added Link establishment rate calculation
Added get_establishment_rate call to Link API
Fixed a number of typos in programs and documentation
Fixed some broken links in documentation

Release Hashes

b44eaed796dcd194bec7a541aaeeb1685b07b2ffce068ca268841e6a8661717f rns-0.4.9-py3-none-any.whl
a15f965a27d208493485724486eb6bc6268d699f2a22ae4fb816bb9b979330fc rnspure-0.4.9-py3-none-any.whl

2023-02-04: RNS β 0.4.8

This release introduces the useful rnid utility, which makes it possible to use Reticulum Identities for offline file encryption, decryption, signing and validation. The IFAC system has also been significantly improved, and several outdated parts of the documentation was updated and fixed. Thanks to @Erethon and @jooray who contributed to this release!

Changes

Added header and payload masking to the IFAC system
Added rnid utility for encrypting, decrypting, signing and validating with Reticulum Identities
Added Bluetooth pairing PIN output to rnodeconf utility
Fixed a bug in announce callback handling
Fixed a inconsistency in header flag handling since IFACs were introduced
Updated documentation and manual

Release Hashes

fbbd55ee43a68c18491f5deabed51085c46fadca7e1bda823ad455c2f7c95a51 rns-0.4.8-py3-none-any.whl
335b0d5dd1d2aacd0d8810191aa09567ecf5d3aa990c446f3e3b1bbf7fce1387 rnspure-0.4.8-py3-none-any.whl

2023-01-14: RNS β 0.4.7

This maintenance release adds support for using the rnodeconf utility to replicate RNode devices, and bootstrap device creation using only tools and software packages obtained from an RNode Bootstrap Console.

Changes

Added the ability to use rnodeconf to bootstrap RNode creation without needing a connection to the Internet
Added ability for rnodeconf to extract firmwares from existing RNodes
Added ability for rnodeconf to use extracted firmwares for autoinstaller and updates
Updated documentation and manual

Release Hashes

7ea22be8f4cc9504d8a612c5589132351cc0c6b474899204afd71367ab3fb226 rns-0.4.7-py3-none-any.whl
3dc337b80df37c247abc9cee06c3ecba0f908449005d0eb365c2a9577d689e57 rnspure-0.4.7-py3-none-any.whl

2022-12-23: RNS β 0.4.6

This maintenance release brings two bugfixes.

Changes

Fixed missing path invalidation on failed link establishments made from a shared instance client
Fixed a memory leak in link handling

Release Hashes

7f1b0b254dce5bb1bacc336b026dab2dda5859b43cb0f4ceed3f70ba825f8873 rns-0.4.6-py3-none-any.whl
775c1b9b5bdf202524e50e58dc7c7bad9262ca3c16471cbfc6fb3a528e732460 rnspure-0.4.6-py3-none-any.whl

2022-12-22: RNS β 0.4.5

This maintenance release significantly improves path rediscovery on roaming devices with multiple interfaces, and adds a few tweaks to interface handling, that are especially relevant on Android.

Changes

Faster roaming path recovery for multiple interface non-transport instances
Fixed AutoInterface multicast echoes failing on interfaces with rolling MAC addresses on every re-connect
Added carrier change detection flag to AutoInterface
Adjusted loglevels for some items

Release Hashes

6757d5d815d4d96c45c181daf321447914c0e90892d43e142f2bd3fffacda9d9 rns-0.4.5-py3-none-any.whl
11669065091d67e3abaddb0096e5c92fc48080692b5644559226b2e2e6721060 rnspure-0.4.5-py3-none-any.whl

2022-12-22: RNS β 0.4.4

This maintenance release improves path response handling and log output.

Release Hashes

b0b59c25910151db0c2085d812bcc3d06cb930ddb8cd1e281b40cb592c1427eb rns-0.4.4-py3-none-any.whl
fe29ce3eb9e55f6953312c8db8c350bd58a7777e8c8dffd5491b840254426332 rnspure-0.4.4-py3-none-any.whl

2022-12-22: RNS β 0.4.3

This maintenance release brings faster path rediscovery and improves hardware support on Android, along with a few other minor tweaks and bugfixes.

Changes

Added automatic path rediscovery on failed link establishments
Added signature validation for link request proof packets for every transport hop
Improved RNode hotplug support over Bluetooth on Android
Improved Resource transfer sequencing and retry handling
Fixed driver initialisation for Qinheng CH34x serial chips on Android
Updates to documentation

Release Hashes

c035c2e21b8b207b00937ad57e947c7b4f17a02fe4f253d6e1fcc000479019b7 rns-0.4.3-py3-none-any.whl
e367576893bada72329ad195ebaa1e295bbca8897241f258428e1957d2da9a55 rnspure-0.4.3-py3-none-any.whl

2022-11-24: RNS β 0.4.2

This maintenance release brings a number of minor improvements, and fixes a few bugs related to hardware support on Android.

Changes

Fixed AutoInterface roaming not working on Android devices that rotate Ethernet and WiFi MAC addresses on every physical connection change
Fixed RNode interface not working over Bluetooth on Android versions 10 and below
Greatly improved startup time for programs connecting to a shared Reticulum instance on slow or resource-limited systems
Improvements to internal utility-functions and logging
Added a public development roadmap
Updates and fixes to the documentation

Release Hashes

ba541ead4194e7ae3e295bf2c84b609041e4dc82e1b5bfce0885396ee090e37f rns-0.4.2-py3-none-any.whl
a352cb8d0862a1a23e66bda08357bf7e725b540bbdd3bb3b32914f3c0bb99a05 rnspure-0.4.2-py3-none-any.whl

2022-11-03: RNS β 0.4.1

This maintenance release fixes few bugs, and improves I2P interface recovery on unresponsive I2P tunnels.

Changes

Added better I2P tunnel state visibility to rnstatus util
Improved I2P recovery time on unresponsive tunnels
Improved I2P tunnel state detection
Fixed missing IFAC identity init on spawned TCP clients
Fixed missing IFAC identity init on spawned I2P interfaces
Fixed missing check for socket state on I2P interfaces

Release Hashes

e28643a7396c3a41d859eb7d3a14f166e648003da36fc49094561fbf49c04b7e rns-0.4.1-py3-none-any.whl
feaa326545c928f3d5dc7b6fdb31975517af15da0751927491c4ac23dac36edc rnspure-0.4.1-py3-none-any.whl

2022-11-03: RNS β 0.4.0

This maintenance release fixes minor bug in the rnodeconf utility.

Changes

Fixed incorrect storage location for local firmware cache in the rnodeconf utility

Release Hashes

16dda7b087cff0c21b7b0460798cb433fc96f27d058eb7d50e38898a1a1e49c4 rns-0.4.0-py3-none-any.whl
5f137cfd42ee9d9e7ae43b25d25849bd087145b7edf2c29ffdfd93d57ab34284 rnspure-0.4.0-py3-none-any.whl

2022-11-03: RNS β 0.3.19

This release adds support for Bluetooth-connected RNode interfaces, and includes a few improvements to the rnodeconf utility.

Changes

Added support for RNode interfaces connected over Bluetooth on Linux and Android
Improved rnodeconf install and update timing, which fixes installs sometimes failing on T-Beam devices

Release Hashes

9d5bee8eb9b2160dab985017bfa3e3db9c35033cfae97653a9fa8faa6064f228 rns-0.3.19-py3-none-any.whl
0f0996b5e401ca5d4e91080df3d6de326fc591164c9e6932a2eb79f1d2b8d375 rnspure-0.3.19-py3-none-any.whl

2022-11-03: RNS β 0.3.18

This maintenance release includes the rnodeconf utility directly in the rns package, and brings a few improvements to interface handling and hardware interfacing.

Important! The minimum supported RNode firmware version for this release is 1.51, and the firmware will needs to be updated with rnodeconf version 2.0.0 or greater, since earlier versions won't be able to fetch the new release files.

Changes

Added rnodeconf utility
Added more options for controlling log output
Added ability to write to the external framebuffer of RNode devices
Improved teardown handling on RNode interfaces

Release Hashes

dc0c56950b85be763270695faf441029f7e6c31cdc44447c6c470e09c734aa45 rns-0.3.18-1-py3-none-any.whl
760bfc52419a8c45a420df41c40a1bf96bd494dabd7efe461c7907b152bbf39c rnspure-0.3.18-1-py3-none-any.whl

2022-11-03: RNS β 0.3.17

This maintenance release fixes a regression in the 0.3.16 release.

Changes

Fixed an incorrect import that inadverdently caused Android-specific interfaces to be used on non Android operating systems.

Release Hashes

SHA256 0e8327461e2d39f859059cc14e94fb33f21e1186c422bb766950f42ca1387656 rns-0.3.17-py3-none-any.whl
SHA256 9e31160cc38e0d5531460d5eca7b3f6e6d8c3b2a7afb04338ee72cc488a2ba18 rnspure-0.3.17-py3-none-any.whl

2022-10-20: RNS β 0.3.16

This maintenance release fixes a single bug that prevented running RNS in Termux (and similar) on Android.

Changes

Fixed missing imports and module checks for API-limited environments on Android

Release Hashes

SHA256 dc4202302b1f1503a0f1c8fef7123b31f7d5d7131ae5b9f988064ebe22e29ed8 rns-0.3.16-py3-none-any.whl
SHA256 127624d2592745602d4a056c347fa6f5989f049275a5b8bfa97c296af9bc497f rnspure-0.3.16-py3-none-any.whl

2022-10-20: RNS β 0.3.15

This maintenance release primarily adds support for external hardware interfaces on Android. A number of bugs have also been fixed, and improvements made to logging output consistency.

Changes

Added support for RNode interfaces on Android
Added support for KISS interfaces on Android
Added support for Serial interfaces on Android
Added AutoInterface support for kernel network devices that rotate MAC addresses on roaming and/or reconnects
Updated various helper functions
Minor log output cleanup and fixes
Fixed missing lookup for locally running destinations in Identity.recall() when running as a shared transport instance
Fixed missing announce cap property on hot-plugged interfaces
Fixed incorrect behaviour in announce processing for instance-local destinations to roaming- or boundary-mode interfaces

Release Hashes

SHA256 c56f32dbfd10fae1b5d2dddafe7d2a0f2127908827a71fce9e43fd051ea453bc rns-0.3.15-py3-none-any.whl
SHA256 597d6df05b3586eaa1515c0215cec30d7a018a209e7900634345c39514efcd18 rnspure-0.3.15-py3-none-any.whl

2022-10-07: RNS β 0.3.14

This maintenance release brings a few improvements, including optimised announce packet structure and updated documentation.

Please note! While this is a small maintenance release, it includes changes to packe structure that breaks backwards compatibility with all previous RNS versions.

Changes

Optimised announce packet structure
Reject mismatching public keys on hash collision.
Minor updates to documentation

Release Hashes

SHA256 b761efc24d20c5719817bfefbbe8ce69f7c91d65bb8273cb02578f77d6f88bc5 rns-0.3.14-py3-none-any.whl
SHA256 cc24a1f010431c8f193ec0ffc6dccade614a5be40c47ac12e3e9ae60b52f046e rnspure-0.3.14-py3-none-any.whl

2022-10-04: RNS β 0.3.13

This maintenance release includes a single but important bugfix.

Changes

Fixed missing hash construction step in announce emission and validation

Release Hashes

SHA256 d6c8a7cb8ea7edc99800df92abff246e8159f2d9c9f1a2b57672385d49647c90 rns-0.3.13-py3-none-any.whl
SHA256 c07c28942e374342c4e807a0b6e81d831737b87cf59651670b8c1c191030a326 rnspure-0.3.13-py3-none-any.whl

2022-09-30: RNS β 0.3.12

This maintenance release includes a fix to the serious security flaw discussed here. Please Note! Updating to RNS 0.3.12 will intentionally break backwards compatibility with all previous verstions for link establishment. It is recommended to upgrade all your systems to 0.3.12 as soon as possible.

Additionally, this release brings a range of small, but very useful improvements to reliability and user experience, along with a significant update to the documentation material.

Changes

Fixed a serious security flaw in link establishment key exchanges
Allow hot-plug of RNode devices
Better detachment handler for TCP clients on shutdown
Implemented better config directory path handling
Clarifications and improvements to various documentation chapters
Improved writing quality of documentation, courtesy of @huyndao
Improved overall presentation of documentation and manual
Improved reliability of data persistence in case of unexpected shutdowns or hardware crashes
Added rnsd warning on start as client
Fixed a rendering bug in the rnpath utility
Added initial connection timeout configuration option to TCP Client interfaces
Brought deprecated native python API calls up to date

Release Hashes

SHA256 74a4881ebf8d805bffb43efef91769b1cbb87affe56ac630355946c7484cffbf rns-0.3.12-py3-none-any.whl
SHA256 03429122b3b4133667632ba2404df7bbf57ea5df1b9c815d7608b1d59cd29a76 rnspure-0.3.12-py3-none-any.whl

2022-07-09: RNS β 0.3.11

This maintenance release contains a single but important bug fix in resource transfers.

Changes

Fixed a an incorrect size calculation for resource advertisements, that would lead to resources of specific sizes failing with an MTU error.

Release Hashes

SHA256 7c03a003326bcd127226414b08cf48f87bcc6b88a7279c52e28415315668543c rns-0.3.11-py3-none-any.whl
SHA256 1a6aaa3ba370ece28cc975ba94b0461c61497cf0797f92662472e0ec20576cb1 rnspure-0.3.11-py3-none-any.whl

2022-07-08: RNS β 0.3.10

This maintenance release contains a single but important bug fix for systems running Reticulum Transport Instances.

Changes

Fixed a potential race condition in link establishment flow, that could lead to links not being established over hops with very low latency.

Release Hashes

SHA256 1c9fb56b967aed507694e6b5d5fca7a89b022cad9fa2058d248e359dc150fba7 rns-0.3.10-py3-none-any.whl
SHA256 8eae07f9e6241ea1f3778430456225dee3ef73bb1c4df5e5362dd00226404628 rnspure-0.3.10-py3-none-any.whl

2022-07-05: RNS β 0.3.9

This release expands the address space of Reticulum to 128 bits, and brings improvements to the documentation, along with a few bugfixes and updates.

Changes

Expanded address space to 128 bits
Updated documentation
Improved rnx interactive mode
Improved readme file
Added reticulum.network website
Added periodic cache cleaning
Fixed a bug in the --no-auth option in rncp

Release Hashes

SHA256 892005e95fc9eda4c4c5d9f94dd33cdc27d3ac6e228d1b0b2519e35069951b86 rns-0.3.9-1-py3-none-any.whl
SHA256 cb7d873c51c746ecdb8963a6a7a0e8d010fb6c61ee785c5e97376d3779a7bae8 rnspure-0.3.9-1-py3-none-any.whl

2022-06-22: RNS β 0.3.8

This release brings big improvements to compatibility with various system types, along with several convenient new features, and a lot of tuning, optimisation and stability improvements. In a continued effort, the documentation has also been updated, restructured, and had several new and informative sections added.

Changes

Added ability to install and run RNS without any dependencies
Added backend abstraction for cryptographic primitives
Added pure-python implementations of all cryptographic primitives
Added accept option to Link API
Added several undocumented API calls to the documentation
Added option to filter interfaces to rnstatus utility
Added "Communications Hardware" chapter to the documentation
Improved multiple chapters and restructured documentation
Improved efficiency of Transport instances
Improved performance of Resource transfers
Improved Resource handling strategies over different physical link types
Improved link capacity and speed estimation calculations
Improved I2P interface error handling and stability
Tuned Resource and Link timeouts
Tuned TCP socket options for better reliability over intermittent links
Tuned I2P interface timeouts for better reliability over intermittent links
Fixed a missing check for zero-length packets on IFAC-enabled interfaces
Fixed a socket allocation leak in I2P interfaces
Added unit tests
Added performance profiling tools
Improved build system

Release SHA-256 for rns-0.3.8-py3-none-any.whl is fdb53aba14840edf3d71dde1a745f319e7f60d6993851b7651bf8ba3d5c53ba7 Release SHA-256 for rnspure-0.3.8-py3-none-any.whl is b0eb004c3725bc20496b1c855e7d22729d8a39fd0cde957ab95aa8c7e13ee3a4

2022-05-29: RNS β 0.3.7

This release comes with a big upgrade to reliability and resilience, with lots of small bug fixes and improvements, along with some significant new additions and features. The documentation and API reference has also seen several improvements for clarity.

Users of I2P interfaces will see big improvements in reliability with better handling of errors from the I2P SAM API, and much better automatic recovery when I2P connectivity is intermittent.

Reticulum is now able to perform network-wide discovery of unknown paths, using the new Gateway interface mode. The stability of established links has also been improved by using a better timeout calculation method.

It is also worth mentioning the addition of the two new utilities, rncp and rnx, that allow you to transfer files to remote systems, and perform remote command execution.

Please Note! For using 64-bit IFACs on RNode hardware, your RNodes must be running at least firmware version 1.28.

Changes

Added gateway interface mode
Added rncp utility for transferring files to remote destinations
Added rnx utility for remotely executing commands and returning output
Implemented unknown path discovery
Implemented recursive path request loop avoidance
Implemented bandwidth cap for recursive path requests
Improved Link authentication callbacks
Improved Link stale time calculations and process
Improved error detection and handling in I2P interfaces
Improved automatic recovery and reliability on intermittent I2P interfaces
Added request size to receipts, and updated relevant API documentation
Added default identity storage folder
Fixed deprecated options in libi2p's asyncio calls
Fixed I2P controller startup when event loop is not immediately ready
Fixed bug in conditional resource acceptance callback
Fixed an invalid interface mode check
Fixed missing recursive progress callback allocation in segmented resource transfer
Fixed expired AP and Roaming interface mode paths not being removed at the correct time
Fixed announce rate targets not being set on I2PInterface peers
Fixed naming conflict in resource advertisements
Fixed link stale time calculation on newly created links without any actual traffic
Fixed a bug that caused large packets (over 492 bytes) with IFAC enabled to be dropped on RNode hardware
Improved output of rnstatus utility
Improved Destination and Link API documentation
Updated documentation and readme

Release SHA-256 for Python Wheel is 2cd9a584d6b13bb478a43b49b7de3f2a8270c4b8979666b1ca40cd81daacbf42

2022-05-17: RNS β 0.3.6

This release adds a number of improvements, a new interface type, and some very useful new interface modes.

Changes

Added PipeInterface, create interfaces with any program over stdio
Added "roaming" and "boundary" interface modes
Added per-interface announce rate control
Added ability to drop announce queues to rnpath utility
Added announce rate information output to rnpath utility
Improved announce queue processing
Improved several documentation chapters
Improved logging output

2022-04-28: RNS β 0.3.5

This release brings major improvements and upgrades to Reticulum, along with better documentation and improved usability of the bundled utilities.

Changes

Greatly improved convergence time. Even on huge networks, newly created destinations become globally reachable in less than a minute.
New announce propagation mechanism allows flexible scalability. Extremely slow network segments can now interconnect seamlessly with huge, high-bandwidth networks while still prioritising end-to-end connectivity for local nodes.
Reticulum can now scale to huge and complex networks with up to 128 hops, and billions of active endpoints.
Added virtual network segmentation for running multiple virtual networks over the same physical channel.
Added interface authentication for creating private access network interfaces and access points.
Updated documentation in accordance with current implementation of announce propagation mechanism.
Updated several outdated documentation chapters.
Added documentation for new interface features.
The output display of the rnstatus utility has been greatly improved.
Added ability to drop paths to the rnpath utility.
Added path table display to rnpath utility.
Added interface rate determination and estimation.
Added configurable bandwidth allocation for announce traffic.
Improved and cleaned logging output.
Various Transport optimisations.
Improved AutoInterface peering timing.
Updated manual in accordance with release.
Fixed a possible race condition in Transport startup when a local shared instance was restarted and apps reconnected.

2022-03-28: RNS β 0.3.4

This is a small maintenance release with a bugfix and some documentation and reliability improvements.

Changes

Fixed https://github.com/markqvist/Reticulum/issues/18 that could potentially cause a routing loop if the API was used in an unintended way
Improved cryptography API compatibility
Improved documentation

2022-02-26: RNS β 0.3.3

This release adds major new functionality to Reticulum, including new connectivity options, improves stability, simplifies configuration and fixes a few bugs.

Improvements

Added the I2P Interface to Reticulum
Added I2P tunneling support for TCP interfaces
Improved recovery of AutoInterface on underlying medium carrier loss
Improved AutoInterface timeouts and timing
Enabled the "outbound" interface option as on by default
Added the "Access Point" interface mode
Simplified default configuration
Added verbose configuration example to the "rnsd" program
Improved documentation and manual
Fixed a potential race condition in resource assembly
Fixed a reference error in TCP interfaces
Fixed a configuration keyword error

2022-01-28: RNS β 0.3.2

This maintenance release adds support for using a much wider range of devices as RNode LoRa interfaces with Reticulum, and also contains a few bugfixes and improvements.

Important! From this release, RNodes used with Reticulum must have at least firmware version 1.26 installed, due to the new multiplatform RNode support.

Improvements

Added full support for RNodes based on ESP32 and ATmega2560 boards
Fixed a bug in TCP interfaces on macOS
Updated documentation and manual

2022-01-26: RNS β 0.3.1

This is a small maintenance and update release of Reticulum, including a few improvements. It also adds support for using ESP32-based T-Beam devices.

Improvements:

Added support for using T-Beam devices using the RNodeInterface
Improved AutoInterface on Android
Improved platform handling
Improved malformed packet handling

2021-12-11: RNS β 0.3.0

This is a major release of Reticulum, including a range of stability and performance improvements, along with important new features, expanding the connectivity of Reticulum.

An important improvement in this release is the addition of the AutoInterface, that will now be configured as the default interface on new installs. This interface automatically meshes with other Reticulum peers over any available system network devices, and doesn't require any existing IP infrastructure like a DHCP server or a router. For more information, consult the relevant section of the manual.

Improvements

Added new AutoInterface as default interface for new installs
Serial port interfaces now automatically attempt to reconnect devices that are unplugged and replugged
Added support for KISS over TCP in the TCPClientInterface
Added support for running Reticulum as a systemd service
Initial support for the Android operating system
Added documentation for installing Reticulum on Android in Termux
Improved documentation and manual
Better path request handling for shared instances
Better shutdown handling on external interrupts
Many small stability and reliability improvements
Fine-tuned various timing parameters for different link types

2021-10-15: RNS β 0.2.9

This beta release adds the fundamentals of RSSI and SNR functionality. It also implements timing improvements, allowing Reticulum to function on even lower bitrate physical links.

Improvements

Added RSSI and SNR reporting on supported interfaces
Added RSSI and SNR to rnprobe utility
Added RSSI and SNR to Echo example
Support for physical layer throughput down to 500 bits per second.
Improved callback handling

2021-10-10: RNS β 0.2.8

This beta release brings a single, but important improvement. Paths are now updated much more fluidly for peers moving around the network.

Since updates were made to how tunnels and path table entries are represented in this release, it is recommended to delete the following files on Transport Nodes:

~/.reticulum/storage/destination_table ~/.reticulum/storage/packet_hashlist ~/.reticulum/storage/tunnels ~/.reticulum/storage/cache/*

The files will be recreated when Reticulum is started.

Improvements

Improved path updates for peers moving around the network

2021-10-08: RNS β 0.2.7

This beta release brings a range of stability improvements and one bugfix.

Improvements

Improved output of the rnstatus utility
Improved shared instance and local client handling
Improved documentation
Improved path restoration on tunnels
Added log rotation

Fixed bugs

Fixed incorrect interface detachment on TCP client interfaces

2021-09-25: RNS β 0.2.6

This beta release brings a range of improvements and a few bugfixes.

Improvements

Added the "rnsd" utility for running Reticulum as a service
Added the "rnstatus" utility for viewing interface status
Added the "rnpath" utility for path lookups
Added the "rnprobe" utility for testing connectivity
Documentation has been improved and expanded
Improved shutdown handling for shared instances
Improved default configuration
Improved recovery of TCP interfaces over unreliable links

Fixed bugs

Fixed a bug in reverse table culling
Fixed a regression in TCP interface client spawner

2021-09-18: RNS β 0.2.5

This beta release brings a range of improvements and bugfixes.

Improvements

Added endpoint tunneling for path restoration over intermittent or roving link layer connections.
Added ability for TCP client interfaces to automatically reconnect if TCP socket drops.
Improved link teardown handling.
Improved interface error handling on non-recoverable / hardware errors.

Fixed bugs

Fixed a bug that could cause path table entries to be culled two times in rare cases.
Fixed a bug that could lead to the "outgoing" directive of interface configuration entries not being parsed correctly.

2021-09-11: RNS β 0.2.4

This beta release brings a range of improvements and bugfixes.

Improvements

Increased link MDU from 415 to 431 bytes by optimising transfer of Fernet tokens.
All data lengths are now calculated dynamically from Reticulums base MTU, laying the groundwork for dynamic MTU interoperability.
Disabled option to allow unencrypted links.
Improved documentation.
Improved request timeouts and handling.
Improved link establishment.
Improved resource transfer timing.

Fixed bugs

Fixed a race condition in inbound proof handling.
Fixed sequencing errors caused by duplicate HMU/request packets not being filtered.

2021-08-29: RNS β 0.2.3

This beta release brings a range of improvements and bugfixes.

Improvements

Improved resource handling.
Improved timeout calculation for packets, links, resources and requests.
Improved announce handling for shared instances.
Improved default configuration template.
Added example "Speedtest".

Fixed bugs

Fixed an issue that caused request timeout even though response had occurred.
Fixed an issue that caused identity files to be written incorrectly.
Fixed resource sequencing errors not being handled gracefully.

2021-08-21: RNS β 0.2.2

This beta release brings several new features to Reticulum along with two bugfixes.

IMPORTANT! This version breaks wire-format compatibility with all previous versions of Reticulum. You must update all of your nodes at the same time.

New features

Link initiators can now identify to the remote peer over the link, once it has been set up. This can be used for authentication, amongst other things.
Requests and responses of arbitrary sizes can now be carried out over links.
UDP and TCP interfaces can now be bound to network device names (eth0, wlan0, etc.) instead of manually specifying listen IPs.

Fixed bugs

Fixed a race condition in outbound transport packet filtering.
Fixed an issue where local UDP broadcast echoes could get processed as inbound packets.

2021-05-20: RNS β 0.2.1

This beta release sees significant improvements to bandwidth utilization and efficiency, while improving security by dropping RSA and moving completely to Curve25519.

All asymmetric cryptography migrated to X25519/Ed25519. This has greatly improved efficiency and reduced protocol overhead significantly.
Work has continued on the documentation, and the "Understanding Reticulum" chapters have been improved significantly in this release.
Class methods dealing with setting callbacks have been renamed to be more intuitive.

As a few examples of the improved efficiency, a complete link establishment now only costs 240 bytes, down from 409 in the previous RSA version. An announce takes up 151 bytes vs 323.

2021-05-18: RNS β 0.2.0

This is the first beta release of RNS. This release also marks the publication of the Reticulum documentation, manual, and API documentation. All core features of Reticulum are now implemented, functional and ready to use in external programs. The wire-format and API will only change if there is a very good reason, though internals are still likely to be altered and optimised, and features are likely to be added.