aredn/files/usr/local/bin/mgr/lqm.lua

1179 lines
48 KiB
Lua
Raw Normal View History

Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
--[[
Copyright (C) 2022-2024 Tim Wilkinson
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
See Contributors file for additional contributors
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation version 3 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Additional Terms:
2024-05-29 01:45:25 -06:00
Additional use restrictions exist on the AREDN® trademark and logo.
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
See AREDNLicense.txt for more info.
2024-05-29 01:45:25 -06:00
Attributions to the AREDN® Project must be retained in the source code.
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
If importing this code into a new or existing project attribution
2024-05-29 01:45:25 -06:00
to the AREDN® project must be added to the source code.
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
You must not misrepresent the origin of the material contained within.
Modified versions must be modified to attribute to the original source
and be marked in reasonable ways as differentiate it from the original
version
--]]
local ip = require("luci.ip")
require("aredn.info")
local socket = require("socket")
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
2024-08-19 10:13:12 -06:00
local refresh_timeout_base = 12 * 60 -- refresh high cost data every 12 minutes
local refresh_timeout_limit = 17 * 60 -- to 17 minutes
local refresh_retry_timeout = 5 * 60
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
local pending_timeout = 5 * 60 -- pending node wait 5 minutes before they are included
local lastseen_timeout = 60 * 60 -- age out nodes we've not seen for 1 hour
local snr_run_avg = 0.8 -- snr running average
local quality_min_packets = 100 -- minimum number of tx packets before we can safely calculate the link quality
local tx_quality_run_avg = 0.8 -- tx quality running average
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
local ping_timeout = 1.0 -- timeout before ping gives a qualtiy penalty
local ping_time_run_avg = 0.8 -- ping time runnng average
local bitrate_run_avg = 0.8 -- rx/tx running average
local dtd_distance = 50 -- distance (meters) after which nodes connected with DtD links are considered different sites
local connect_timeout = 5 -- timeout (seconds) when fetching information from other nodes
local speed_time = 10 --
local speed_limit = 1000 -- close connection if it's too slow (< 1kB/s for 10 seconds)
local default_short_retries = 20 -- More link-level retries helps overall tcp performance (factory default is 7)
local default_long_retries = 20 -- (factory default is 4)
local default_min_routes = 8 -- Minimum number of routes (nodes x2 usually) on a link which *must* be left active. Avoids cutting off poorly behaving leaf nodes.
local wireguard_alive_time = 300 -- 5 minutes
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
local NFT = "/usr/sbin/nft"
2022-06-07 22:15:38 -06:00
local IW = "/usr/sbin/iw"
local ARPING = "/usr/sbin/arping"
local CURL = "/usr/bin/curl"
local IPCMD = "/sbin/ip"
2022-06-07 22:15:38 -06:00
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
local now = 0
local config = {}
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
local total_node_route_count = nil
function update_config()
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
local c = uci.cursor() -- each time as /etc/config/aredn may have changed
config = {
enable = c:get("aredn", "@lqm[0]", "enable") == "1",
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
margin = tonumber(c:get("aredn", "@lqm[0]", "margin_snr")),
low = tonumber(c:get("aredn", "@lqm[0]", "min_snr")),
rts_threshold = tonumber(c:get("aredn", "@lqm[0]", "rts_threshold") or "1"),
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
min_distance = tonumber(c:get("aredn", "@lqm[0]", "min_distance")),
max_distance = tonumber(c:get("aredn", "@lqm[0]", "max_distance")),
auto_distance = tonumber(c:get("aredn", "@lqm[0]", "auto_distance") or "0"),
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
min_quality = tonumber(c:get("aredn", "@lqm[0]", "min_quality")),
margin_quality = tonumber(c:get("aredn", "@lqm[0]", "margin_quality")),
ping_penalty = tonumber(c:get("aredn", "@lqm[0]", "ping_penalty")),
min_routes = tonumber(c:get("aredn", "@lqm[0]", "min_routes") or default_min_routes),
user_blocks = c:get("aredn", "@lqm[0]", "user_blocks") or "",
user_allows = c:get("aredn", "@lqm[0]", "user_allows") or ""
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
}
end
2022-05-22 20:06:02 -06:00
-- Connected if we have tracked this link recently
2022-05-20 20:23:57 -06:00
function is_connected(track)
if track.lastseen >= now then
return true
else
return false
end
end
2022-05-22 20:06:02 -06:00
-- Pending if this link is too new
function is_pending(track)
if track.pending > now then
return true
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
else
2022-05-22 20:06:02 -06:00
return false
end
end
function is_user_blocked(track)
if not track.user_allow and track.blocks.user then
return true
end
return false
end
function is_leaf(track)
return (track.leaf == "minor" and track.rev_leaf == "major") or (track.leaf == "major" and track.rev_leaf == "minor")
end
2022-05-22 20:06:02 -06:00
function should_block(track)
if track.user_allow then
return false
elseif not config.enable then
return track.blocks.user
elseif is_pending(track) then
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
return track.blocks.dtd or track.blocks.user
elseif is_leaf(track) then
return false
2022-05-22 20:06:02 -06:00
else
return track.blocks.dtd or track.blocks.signal or track.blocks.distance or track.blocks.user or track.blocks.dup or track.blocks.quality
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
end
function should_nonpair_block(track)
2022-06-07 22:15:38 -06:00
return track.blocks.dtd or track.blocks.signal or track.blocks.distance or track.blocks.user or track.blocks.quality or track.type ~= "RF"
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
2022-05-20 20:23:57 -06:00
function should_ping(track)
if not track.ip or is_user_blocked(track) or track.lastseen < now then
return false
end
if track.type == "Tunnel" or track.type == "Wireguard" then
-- Tunnels use L3 pings, so we can only ping if we're not blocked
if track.blocked then
return false
end
else
-- Non-tunnels use L2 pings, so we can still ping even when blocked
-- but we dont ping if the node is too distance, the signal is too low, or we dont use this RF because
-- we have a DTD connection instead
if track.blocks.distance or track.blocks.signal or track.blocks.dtd then
return false
end
2022-05-20 20:23:57 -06:00
end
return true
end
function should_update_info(track)
if track.blocked and not track.blocks.distance then
return false
end
return true
end
function nft(cmd)
os.execute(NFT .. " " .. cmd)
2022-05-20 20:23:57 -06:00
end
function nft_insert(chain, cmd)
os.execute(NFT .. " insert rule ip fw4 " .. chain .. " " .. cmd)
end
function nft_delete(chain, handle)
os.execute(NFT .. " delete rule ip fw4 " .. chain .. " handle " .. handle)
end
function nft_handle(chain, query)
for line in io.popen(NFT .. " -a list chain ip fw4 " .. chain):lines()
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
do
local handle = line:match(query .. ".*# handle (%d+)$")
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
if handle then
return handle
end
end
return nil
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
function update_block(track)
if should_block(track) then
2022-05-31 20:54:02 -06:00
track.blocked = true
2024-01-17 15:02:20 -07:00
if track.type == "Tunnel" or track.type == "Wireguard" then
if not nft_handle("input_lqm", "iifname \\\"" .. track.device .. "\\\" udp dport 698 drop") then
nft_insert("input_lqm", "iifname \\\"" .. track.device .. "\\\" udp dport 698 drop 2> /dev/null")
2022-06-07 22:15:38 -06:00
return "blocked"
end
else
if not nft_handle("input_lqm", "udp dport 698 ether saddr " .. track.mac .. " drop") then
nft_insert("input_lqm", "udp dport 698 ether saddr " .. track.mac .. " drop 2> /dev/null")
2022-06-07 22:15:38 -06:00
return "blocked"
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
else
2022-05-31 20:54:02 -06:00
track.blocked = false
2024-01-17 15:02:20 -07:00
if track.type == "Tunnel" or track.type == "Wireguard" then
local handle = nft_handle("input_lqm", "iifname \\\"" .. track.device .. "\\\" udp dport 698 drop")
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
if handle then
nft_delete("input_lqm", handle)
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
return "unblocked"
2022-06-07 22:15:38 -06:00
end
else
local handle = nft_handle("input_lqm", "udp dport 698 ether saddr " .. track.mac .. " drop")
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
if handle then
nft_delete("input_lqm", handle)
2022-06-07 22:15:38 -06:00
return "unblocked"
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
end
return "unchanged"
end
2022-05-31 20:54:02 -06:00
function force_remove_block(track)
track.blocked = false
local handle = nft_handle("input_lqm", "udp dport 698 ether saddr " .. track.mac .. " drop")
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
if handle then
nft_delete("input_lqm", handle)
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
end
handle = nft_handle("input_lqm", "iifname \\\"" .. track.device .. "\\\" udp dport 698 drop")
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
if handle then
nft_delete("input_lqm", handle)
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
end
2022-05-31 20:54:02 -06:00
end
2024-08-19 10:13:12 -06:00
function refresh_timeout()
return math.random(refresh_timeout_base, refresh_timeout_limit)
end
2022-05-22 20:06:02 -06:00
-- Distance in meters between two points
function calc_distance(lat1, lon1, lat2, lon2)
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
local r2 = 12742000 -- diameter earth (meters)
local p = 0.017453292519943295 -- Math.PI / 180
local v = 0.5 - math.cos((lat2 - lat1) * p) / 2 + math.cos(lat1 * p) * math.cos(lat2 * p) * (1 - math.cos((lon2 - lon1) * p)) / 2
return math.floor(r2 * math.asin(math.sqrt(v)))
end
function av(c, f, n, o)
if c and o and n then
return f * c + (1 - f) * (n - o)
else
return n
end
end
function round(v)
return math.floor(v + 0.5)
end
-- Canonical hostname
function canonical_hostname(hostname)
return hostname and hostname:lower():gsub("^dtdlink%.",""):gsub("^mid%d+%.",""):gsub("^xlink%d+%.",""):gsub("%.local%.mesh$", "")
end
local myhostname = canonical_hostname(aredn.info.get_nvram("node") or "localnode")
local myip = uci.cursor():get("network", "wifi", "ipaddr")
local is_supernode = uci.cursor():get("aredn", "@supernode[0]", "enable") == "1"
2023-01-12 13:43:55 -07:00
local wgsupport = nixio.fs.stat("/usr/bin/wg")
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- Clear old data
local f = io.open("/tmp/lqm.info", "w")
2023-01-12 20:58:27 -07:00
f:write('{"trackers":{},"hidden_nodes":[]}')
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
f:close()
-- Get radio
2022-06-07 22:15:38 -06:00
local radiomode = "none"
local wlan = aredn.hardware.get_iface_name("wifi")
local phy = "none"
if wlan:match("^wlan(%d+)$") then
phy = iwinfo.nl80211.phyname(wlan)
radiomode = "adhoc"
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
function iw_set(cmd)
if phy ~= "none" then
os.execute(IW .. " " .. phy .. " set " .. cmd .. " > /dev/null 2>&1")
end
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
function lqm()
-- Let things startup for a while before we begin
wait_for_ticks(math.max(0, 30 - nixio.sysinfo().uptime))
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- Create filters (cannot create during install as they disappear on reboot)
nft("flush chain ip fw4 input_lqm 2> /dev/null")
nft("delete chain ip fw4 input_lqm 2> /dev/null")
nft("add chain ip fw4 input_lqm 2> /dev/null")
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
local handle = nft_handle("input", "jump input_lqm comment")
if handle then
nft_delete("input", handle)
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
end
nft_insert("input", "jump input_lqm comment \\\"block low quality links\\\"")
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- We dont know any distances yet
iw_set("distance auto")
-- Or any hidden nodes
iw_set("rts off")
if config.enable then
-- Set the default retries
iw_set("retry short " .. default_short_retries .. " long " .. default_long_retries)
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- If the channel bandwidth is less than 20, we need to adjust what we report as the values from 'iw' will not
-- be correct
local channel_bw_scale = 1
local chanbw = read_all("/sys/kernel/debug/ieee80211/" .. phy .. "/ath10k/chanbw")
if not chanbw then
chanbw = read_all("/sys/kernel/debug/ieee80211/" .. phy .. "/ath9k/chanbw")
end
if chanbw then
chanbw = tonumber(chanbw)
if chanbw == 10 then
channel_bw_scale = 0.5
elseif chanbw == 5 then
channel_bw_scale = 0.25
end
end
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
local noise = -95
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
local tracker = {}
2022-06-07 22:15:38 -06:00
local dtdlinks = {}
local rflinks = {}
local hidden_nodes = {}
local last_coverage = -1
local last_short_retries = -1
local last_long_retries = -1
local pending_count = 0
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
while true
do
now = nixio.sysinfo().uptime
update_config()
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
local cursor = uci.cursor()
local cursorm = uci.cursor("/etc/config.mesh")
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
local lat = cursor:get("aredn", "@location[0]", "lat")
local lon = cursor:get("aredn", "@location[0]", "lon")
lat = tonumber(lat)
lon = tonumber(lon)
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
local arps = {}
for line in io.popen(IPCMD .. " neigh show"):lines()
do
local ip, dev, mac, probes, state = line:match("^(%S+) dev (%S+) lladdr (%S+) .+ probes (%d+) (.+)$")
if ip and (tonumber(probes) < 4 or state ~= "STALE") then
arps[#arps + 1] = {
Device = dev,
["HW address"] = mac:lower(),
["IP address"] = ip
}
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- Find all our devices and know our macs so we can exclude them
local devices = {}
for _, i in ipairs(nixio.getifaddrs())
do
if i.name then
local dev = devices[i.name]
if not dev then
dev = { name = i.name }
devices[i.name] = dev
end
if i.family == "packet" then
if i.addr then
dev.mac = i.addr:lower()
end
dev.tx_packets = i.data.tx_packets
dev.tx_fail = i.data.tx_errors
end
if i.family == "inet" then
dev.ip = i.addr
dev.dstip = i.dstaddr
if not dev.mac then
-- Fake a mac from the ip if we need one
local a, b, c, d = dev.ip:match("^(%d+)%.(%d+)%.(%d+)%.(%d+)$")
dev.mac = string.format("00:00:%02X:%02X:%02X:%02X", a, b, c, d)
end
end
end
end
-- Find the wireguard tunnels that are active
local wgtuns = {}
if wgsupport then
local f = io.popen("/usr/bin/wg show all latest-handshakes")
if f then
for line in f:lines()
do
local iface, handshake = line:match("^(%S+)%s+%S+%s+(%d+)%s*$")
if iface and tonumber(handshake) + wireguard_alive_time > os.time() then
wgtuns[iface] = true
end
end
f:close()
end
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
local stations = {}
2022-06-07 22:15:38 -06:00
-- Legacy and wireguard tunnels
for _, dev in pairs(devices)
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
do
if dev.name:match("^tun%d+") then
stations[#stations + 1] = {
2022-06-07 22:15:38 -06:00
type = "Tunnel",
device = dev.name,
ip = dev.dstip,
mac = dev.mac,
tx_packets = dev.tx_packets,
tx_fail = dev.tx_fail
}
elseif dev.name:match("^wgc%d+") and wgtuns[dev.name] then
local ip123, ip4 = dev.ip:match("^(%d+%.%d+%.%d+%.)(%d+)$")
stations[#stations + 1] = {
type = "Wireguard",
device = dev.name,
ip = ip123 .. (tonumber(ip4) + 1),
mac = dev.mac,
tx_packets = dev.tx_packets,
tx_fail = dev.tx_fail
}
elseif dev.name:match("^wgs%d+") and wgtuns[dev.name] then
local ip123, ip4 = dev.ip:match("^(%d+%.%d+%.%d+%.)(%d+)$")
stations[#stations + 1] = {
type = "Wireguard",
device = dev.name,
ip = ip123 .. (tonumber(ip4) - 1),
mac = dev.mac,
tx_packets = dev.tx_packets,
tx_fail = dev.tx_fail
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
}
end
end
-- Xlink interfaces
local xlinks = {}
cursorm:foreach("xlink", "interface",
function(section)
if section.ifname then
xlinks[section.ifname] = true
end
end
)
-- DtD & Xlinks
2023-02-11 12:45:04 -07:00
for _, entry in ipairs(arps)
2022-06-07 22:15:38 -06:00
do
if entry.Device:match("%.2$") or entry.Device:match("^br%-dtdlink") then
2023-02-01 23:57:06 -07:00
stations[#stations + 1] = {
type = "DtD",
device = entry.Device,
ip = entry["IP address"],
mac = entry["HW address"]
2023-02-01 23:57:06 -07:00
}
elseif xlinks[entry.Device] then
stations[#stations + 1] = {
type = "Xlink",
device = entry.Device,
ip = entry["IP address"],
mac = entry["HW address"]
}
2022-06-07 22:15:38 -06:00
end
end
-- RF
if radiomode == "adhoc" then
local kv = {
["signal avg:"] = "signal",
["tx packets:"] = "tx_packets",
["tx retries:"] = "tx_retries",
["tx failed:"] = "tx_fail",
["tx bitrate:"] = "tx_bitrate",
["rx bitrate:"] = "rx_bitrate"
}
local station = {}
local cnoise = iwinfo.nl80211.noise(wlan)
if cnoise and cnoise < -70 then
noise = round(noise * 0.9 + cnoise * 0.1)
end
for line in io.popen(IW .. " " .. wlan .. " station dump"):lines()
do
local mac = line:match("^Station ([0-9a-fA-F:]+) ")
if mac then
station = {
type = "RF",
device = wlan,
mac = mac:lower(),
signal = nil,
noise = noise,
ip = nil,
tx_bitrate = 0,
rx_bitrate = 0
}
for _, entry in ipairs(arps)
do
if entry["HW address"] == station.mac and entry.Device:match("^wlan") then
station.ip = entry["IP address"]
break
end
end
else
for k, v in pairs(kv)
do
local val = line:match(k .. "%s*([%d%-]+)")
if val then
station[v] = tonumber(val)
if v == "tx_bitrate" or v == "rx_bitrate" then
station[v] = station[v] * channel_bw_scale
end
if v == "signal" then
stations[#stations + 1] = station
end
end
end
end
end
end
-- Update the trackers based on the latest station information
2022-06-07 22:15:38 -06:00
for _, station in ipairs(stations)
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
do
if not tracker[station.mac] then
tracker[station.mac] = {
type = station.type,
device = station.device,
firstseen = now,
lastseen = now,
pending = now + pending_timeout,
refresh = 0,
mac = station.mac,
ip = nil,
hostname = nil,
lat = nil,
lon = nil,
distance = nil,
localarea = nil,
blocks = {
dtd = false,
signal = false,
distance = false,
pair = false,
quality = false
},
blocked = false,
snr = nil,
rev_snr = nil,
avg_snr = nil,
last_tx = nil,
tx_quality = nil,
ping_quality = nil,
ping_success_time = nil,
tx_bitrate = nil,
rx_bitrate = nil,
quality = nil,
quality0_seen = nil,
quality_block_snr = nil,
last_tx_fail = nil,
last_tx_retries = nil,
avg_tx = nil,
avg_tx_retries = nil,
avg_tx_fail = nil,
node_route_count = 0,
leaf = nil,
2024-08-22 01:09:32 -06:00
rev_leaf = nil,
rev_ping_quality = nil,
rev_ping_success_time = nil,
rev_quality = nil
}
end
local track = tracker[station.mac]
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- IP and Hostname
if station.ip and station.ip ~= track.ip then
track.ip = station.ip
track.hostname = nil
end
if not track.hostname and track.ip then
track.hostname = canonical_hostname(nixio.getnameinfo(track.ip))
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- Running average SNR
if station.signal and station.noise then
track.snr = round(av(track.snr, snr_run_avg, station.signal - station.noise, 0))
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- Running average estimate of link quality
local tx = station.tx_packets
local tx_retries = station.tx_retries
local tx_fail = station.tx_fail
if tx and track.tx and tx >= track.tx + quality_min_packets then
track.avg_tx = av(track.avg_tx, tx_quality_run_avg, tx, track.tx)
track.avg_tx_retries = av(track.avg_tx_retries, tx_quality_run_avg, tx_retries, track.tx_retries)
track.avg_tx_fail = av(track.avg_tx_fail, tx_quality_run_avg, tx_fail, track.tx_fail)
local bad = math.max((track.avg_tx_fail or 0), (track.avg_tx_retries or 0))
track.tx_quality = 100 * (1 - math.min(1, math.max(track.avg_tx > 0 and bad / track.avg_tx or 0, 0)))
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
track.tx = tx
track.tx_retries = tx_retries
track.tx_fail = tx_fail
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
track.tx_bitrate = av(track.tx_bitrate, bitrate_run_avg, station.tx_bitrate, track.tx_bitrate)
track.rx_bitrate = av(track.rx_bitrate, bitrate_run_avg, station.rx_bitrate, track.rx_bitrate)
track.lastseen = now
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- Update link tracking state
local ip2tracker = {}
pending_count = 0
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
for _, track in pairs(tracker)
do
if not track.ip then
track.routable = false
else
ip2tracker[track.ip] = track
2023-01-22 19:15:42 -07:00
-- Update if link is routable
local rt = ip.route(track.ip)
if rt and tostring(rt.gw) == track.ip then
track.routable = true
else
track.routable = false
end
-- Refresh remote attributes periodically as this is expensive
2024-08-19 10:13:12 -06:00
-- We dont do it the very first time so we can populate the LQM state with a new node quickly
if now > track.refresh and track.firstseen ~= track.lastseen then
-- Refresh the hostname periodically as it can change
track.hostname = canonical_hostname(nixio.getnameinfo(track.ip)) or track.hostname
if not should_update_info(track) then
-- We cannot update so invalidate any information considered stale and set time to attempt refresh
track.refresh = is_pending(track) and 0 or now + refresh_retry_timeout
track.rev_snr = nil
track.rev_leaf = nil
2024-08-22 01:09:32 -06:00
track.rev_ping_success_time = nil
track.rev_ping_quality = nil
track.rev_quality = nil
else
local raw = io.popen(CURL .. " --retry 0 --connect-timeout " .. connect_timeout .. " --speed-time " .. speed_time .. " --speed-limit " .. speed_limit .. " -s \"http://" .. track.ip .. ":8080/cgi-bin/sysinfo.json?link_info=1&lqm=1\" -o - 2> /dev/null")
local info = luci.jsonc.parse(raw:read("*a"))
raw:close()
wait_for_ticks(0)
if not info then
-- Failed to fetch information. Set time for retry and invalidate any information
-- considered stale
track.refresh = is_pending(track) and 0 or now + refresh_retry_timeout
track.rev_snr = nil
track.rev_leaf = nil
2024-08-22 01:09:32 -06:00
track.rev_ping_success_time = nil
track.rev_ping_quality = nil
track.rev_quality = nil
else
2024-08-19 10:13:12 -06:00
track.refresh = is_pending(track) and 0 or now + refresh_timeout()
dtdlinks[track.mac] = {}
-- Update the distance to the remote node
track.lat = tonumber(info.lat) or track.lat
track.lon = tonumber(info.lon) or track.lon
if track.lat and track.lon and lat and lon then
track.distance = calc_distance(lat, lon, track.lat, track.lon)
if track.type == "DtD" and track.distance < dtd_distance then
track.localarea = true
else
track.localarea = false
end
end
-- Keep some useful info
if info.node_details then
track.model = info.node_details.model
track.firmware_version = info.node_details.firmware_version
end
2024-08-22 01:09:32 -06:00
if info.lqm and info.lqm.enabled and info.lqm.info and info.lqm.info.trackers then
for _, rtrack in pairs(info.lqm.info.trackers)
do
if myhostname == canonical_hostname(rtrack.hostname) then
track.rev_ping_success_time = rtrack.ping_success_time
track.rev_ping_quality = rtrack.ping_quality
track.rev_quality = rtrack.quality
break
end
end
end
if track.type == "RF" then
rflinks[track.mac] = nil
if info.lqm and info.lqm.enabled and info.lqm.info and info.lqm.info.trackers then
rflinks[track.mac] = {}
for _, rtrack in pairs(info.lqm.info.trackers)
do
if rtrack.type == "RF" or not rtrack.type then
local rhostname = canonical_hostname(rtrack.hostname)
if rtrack.ip and rtrack.routable then
local rdistance = nil
if tonumber(rtrack.lat) and tonumber(rtrack.lon) and lat and lon then
rdistance = calc_distance(lat, lon, tonumber(rtrack.lat), tonumber(rtrack.lon))
end
rflinks[track.mac][rtrack.ip] = {
ip = rtrack.ip,
hostname = rhostname,
distance = rdistance
}
end
if myhostname == rhostname then
track.rev_snr = (track.rev_snr and rtrack.snr) and round(snr_run_avg * track.rev_snr + (1 - snr_run_avg) * rtrack.snr) or rtrack.snr
track.rev_leaf = rtrack.leaf
end
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
for ip, link in pairs(info.link_info)
do
if link.hostname and link.linkType == "DTD" then
dtdlinks[track.mac][canonical_hostname(link.hostname)] = true
end
end
elseif info.link_info then
rflinks[track.mac] = {}
-- If there's no LQM information we fallback on using link information.
for ip, link in pairs(info.link_info)
do
local rhostname = canonical_hostname(link.hostname)
if link.linkType == "RF" then
rflinks[track.mac][ip] = {
ip = ip,
hostname = rhostname
}
end
if rhostname then
if link.linkType == "DTD" then
dtdlinks[track.mac][rhostname] = true
elseif link.linkType == "RF" and link.signal and link.noise and myhostname == rhostname then
local snr = link.signal - link.noise
track.rev_snr = track.rev_snr and round(snr_run_avg * track.rev_snr + (1 - snr_run_avg) * snr) or snr
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
end
end
end
end
end
end
end
-- Update avg snr using both ends (if we have them)
if track.snr then
if track.rev_snr then
track.avg_snr = round((track.snr + track.rev_snr) / 2)
2022-05-20 20:23:57 -06:00
else
track.avg_snr = track.snr
2022-05-20 20:23:57 -06:00
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
else
track.avg_snr = nil
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
-- Count number of pending trackers
if is_pending(track) then
pending_count = pending_count + 1
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- Ping addresses and penalize quality for excessively slow links
if should_ping(track) then
local success = false
local ptime
if track.type ~= "Tunnel" and track.type ~= "Wireguard" then
-- For devices which support ARP, send an ARP request and wait for a reply. This avoids the other ends routing
-- table and firewall messing up the response packet.
local pstart = socket.gettime(0)
if os.execute(ARPING .. " -q -c 1 -D -w " .. round(ping_timeout) .. " -I " .. track.device .. " " .. track.ip) ~= 0 then
success = true
end
ptime = socket.gettime(0) - pstart
end
if not success then
2024-09-13 12:34:14 -06:00
if track.routable then
-- If that fails, measure the "ping" time directly to the device by sending a UDP packet
local sigsock = nixio.socket("inet", "dgram")
sigsock:setopt("socket", "rcvtimeo", ping_timeout)
sigsock:setopt("socket", "bindtodevice", track.device)
sigsock:setopt("socket", "dontroute", 1)
-- Must connect or we wont see the error
sigsock:connect(track.ip, 8080)
local pstart = socket.gettime(0)
sigsock:send("")
-- There's no actual UDP server at the other end so recv will either timeout and return 'false' if the link is slow,
-- or will error and return 'nil' if there is a node and it send back an ICMP error quickly (which for our purposes is a positive)
if sigsock:recv(0) ~= false then
success = true
end
ptime = socket.gettime(0) - pstart
sigsock:close()
else
-- We can't ping non-routable targets so don't consider them errors
ptime = nil
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
wait_for_ticks(0)
track.ping_quality = track.ping_quality and (track.ping_quality + 1) or 100
2024-09-13 12:34:14 -06:00
if ptime then
if success then
track.ping_success_time = track.ping_success_time and (track.ping_success_time * ping_time_run_avg + ptime * (1 - ping_time_run_avg)) or ptime
else
track.ping_quality = track.ping_quality - config.ping_penalty
end
end
track.ping_quality = math.max(0, math.min(100, track.ping_quality))
if not success and track.type == "DtD" and track.firstseen == now then
-- If local ping immediately fail, ditch this tracker. This can happen sometimes when we
-- find arp entries which aren't valid.
tracker[track.mac] = nil
end
else
track.ping_quality = nil
track.ping_success_time = nil
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
-- Calculate overall link quality
if track.tx_quality then
if track.ping_quality then
track.quality = round((track.tx_quality + track.ping_quality) / 2)
else
track.quality = round(track.tx_quality)
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
elseif track.ping_quality then
track.quality = round(track.ping_quality)
else
track.quality = nil
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
if track.quality and track.quality == 0 and not track.quality0_seen then
track.quality0_seen = now
end
track.node_route_count = 0
end
--
-- Pull in the routing table to see how many node routes are associated with each tracker.
-- We don't do this for supernodes as the table is very big and we don't use the information.
-- Don't pull the data from OLSR as this can be too distruptive to its operation on slower nodes
-- with large routing tables.
--
if not is_supernode then
total_node_route_count = 0
for line in io.popen(IPCMD .. " route show table 30"):lines()
do
local gw = line:match("^10%.%d+%.%d+%.%d+ via (%d+%.%d+%.%d+%.%d+) dev")
if gw then
local track = ip2tracker[gw];
if track then
track.node_route_count = track.node_route_count + 1
total_node_route_count = total_node_route_count + 1
end
end
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
--
-- At this point we have gather all the data we need to determine which links are best to use and
-- which links should be blocked.
--
local leafs = 0
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
for _, track in pairs(tracker)
do
for _ = 1,1
do
-- Clear state
local oldblocks = track.blocks;
track.blocks = {
dtd = false,
signal = false,
distance = false,
pair = false,
quality = false
}
-- A leaf link is one where most (but not 0) of the nodes are on one end or the other
-- We try to keep leaf links active even if they wouldn't otherwise be, so they dont get cut off.
track.leaf = nil
if track.node_route_count > 0 then
if total_node_route_count - track.node_route_count <= config.min_routes then
track.leaf = "minor"
elseif track.node_route_count <= config.min_routes then
track.leaf = "major"
end
end
-- Always allow if user requested it
for val in string.gmatch(config.user_allows, "([^,]+)")
do
if val:gsub("%s+", ""):gsub("-", ":"):lower() == track.mac then
track.user_allow = true
break
end
2022-06-07 22:15:38 -06:00
end
if track.user_allow then
break
2022-06-07 22:15:38 -06:00
end
-- Block if user requested it
for val in string.gmatch(config.user_blocks, "([^,]+)")
do
if val:gsub("%s+", ""):gsub("-", ":"):lower() == track.mac then
track.blocks.user = true
break
end
2022-06-07 22:15:38 -06:00
end
if track.blocks.user then
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
break
end
-- SNR and distance blocks only related to RF links
if track.type == "RF" then
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- Block any nodes which are too distant
if track.distance and (track.distance < config.min_distance or track.distance > config.max_distance) then
track.blocks.distance = true
break
end
-- If we have a direct dtd connection to this device, make sure we use that
for _, dtd in pairs(tracker) do
if dtd.type == "DtD" and dtd.hostname == track.hostname then
if dtd.distance and dtd.distance < dtd_distance and dtd.routable then
track.blocks.dtd = true
end
break
end
end
if track.blocks.dtd then
break
end
-- When unblocked link signal becomes too low, block
if not oldblocks.signal then
if track.snr < config.low or (track.rev_snr and track.rev_snr < config.low) then
track.blocks.signal = true
break
end
-- when blocked link becomes (low+margin) again, dont maintain block
else
if track.snr < config.low + config.margin or (track.rev_snr and track.rev_snr < config.low + config.margin) then
track.blocks.signal = true
break
else
-- When signal is good enough to unblock a link but the quality is low, artificially bump
-- it up to give the link chance to recover
if oldblocks.quality then
track.quality = config.min_quality + config.margin_quality
track.quality0_seen = nil
end
end
end
-- If we have a quality block and the snr gets sufficiently better, bump the quality to unblock it and see if things have improved
if oldblocks.quality and track.quality_block_snr and track.avg_snr and track.avg_snr > track.quality_block_snr + config.margin then
track.quality = config.min_quality + config.margin_quality
track.quality0_seen = nil
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
-- Block if quality is poor
if track.quality and (track.type ~= "DtD" or (track.distance and track.distance >= dtd_distance)) then
if not oldblocks.quality then
if track.quality < config.min_quality then
track.blocks.quality = true
track.quality_block_snr = track.avg_snr
end
else
if track.quality < config.min_quality + config.margin_quality then
track.blocks.quality = true
end
end
end
end
-- Count block leafs
if is_leaf(track) and (track.blocks.distance or track.blocks.signal or track.blocks.quality) then
leafs = leafs + 1
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
-- Eliminate link pairs, where we might have links to multiple radios at the same site
-- Find them and select the one with the best SNR avg on both ends
for _, track in pairs(tracker)
do
if track.hostname and not should_nonpair_block(track) then
-- Get a list of radio pairs. These are radios we're associated with which are DTD'ed together
local tracklist = { track }
for _, track2 in pairs(tracker)
do
if track ~= track2 and track2.hostname and not should_nonpair_block(track2) then
if dtdlinks[track.mac] and dtdlinks[track.mac][track2.hostname] then
if not (track.lat and track.lon and track2.lat and track2.lon) or calc_distance(track.lat, track.lon, track2.lat, track2.lon) < dtd_distance then
tracklist[#tracklist + 1] = track2
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
end
end
if #tracklist == 1 then
track.blocks.dup = false
else
-- Find the link with the best average snr overall as well as unblocked
local bestany = track
local bestunblocked = nil
for _, track2 in ipairs(tracklist)
do
if track2.avg_snr > bestany.avg_snr then
bestany = track2
end
if not track2.blocks.dup and (not bestunblocked or (track2.avg_snr > bestunblocked.avg_snr)) then
bestunblocked = track2
end
end
-- A new winner if it's sufficiently better than the current
if not bestunblocked or bestany.avg_snr >= bestunblocked.avg_snr + config.margin then
bestunblocked = bestany
end
for _, track2 in ipairs(tracklist)
do
if track2 == bestunblocked then
track2.blocks.dup = false
else
track2.blocks.dup = true
end
end
end
end
end
--
-- We now have updated state on what is blocked and what is not.
-- Reflect this state with the firewall and various other
-- node parameters (e.g. rts, coverage)
--
local distance = -1
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- Update the block state and calculate the routable distance
for _, track in pairs(tracker)
do
if is_connected(track) then
2022-05-22 20:06:02 -06:00
if update_block(track) == "unblocked" then
-- If the link becomes unblocked, return it to pending state
track.pending = now + pending_timeout
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
if track.type == "RF" then
-- Find the most distant, unblocked, RF node
if track.distance then
if track.distance > distance and (not track.blocked or is_pending(track)) then
2022-05-22 20:06:02 -06:00
distance = track.distance
end
elseif is_pending(track) then
distance = config.max_distance
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
end
end
-- Remove any trackers which are too old or if they disconnect when first seen
if ((now > track.lastseen + lastseen_timeout) or
(not is_connected(track) and track.firstseen + pending_timeout > now) or
(track.quality0_seen and now > track.quality0_seen + lastseen_timeout)
) then
2022-05-31 20:54:02 -06:00
force_remove_block(track)
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
tracker[track.mac] = nil
end
end
-- Default distances if we haven't calcuated anything
if distance < 0 then
if config.auto_distance > 0 then
distance = config.auto_distance
else
distance = config.max_distance
end
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- Update the wifi distance
local coverage = math.min(255, math.floor((distance * 2 * 0.0033) / 3))
if config.enable and coverage ~= last_coverage then
iw_set("coverage " .. coverage)
last_coverage = coverage
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
end
-- Set the RTS/CTS state depending on whether everyone can see everyone
-- Build a list of all the nodes our neighbors can see
local theres = {}
for mac, rfneighbor in pairs(rflinks)
do
local track = tracker[mac]
if track and not track.blocked and track.routable then
for nip, ninfo in pairs(rfneighbor)
do
theres[nip] = ninfo
end
end
end
-- Remove all the nodes we can see from this set
for _, track in pairs(tracker)
do
if track.ip then
theres[track.ip] = nil
end
end
2023-01-12 13:43:55 -07:00
-- Including ourself
theres[myip] = nil
-- If there are any nodes left, then our neighbors can see hidden nodes we cant. Enable RTS/CTS
local hidden = {}
for _, ninfo in pairs(theres)
do
hidden[#hidden + 1] = ninfo
end
if config.enable and (#hidden == 0) ~= (#hidden_nodes == 0) and config.rts_threshold >= 0 and config.rts_threshold <= 2347 then
if #hidden > 0 then
iw_set("rts " .. config.rts_threshold)
else
iw_set("rts off")
end
end
hidden_nodes = hidden
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
-- Save this for the UI
f = io.open("/tmp/lqm.info", "w")
if f then
f:write(luci.jsonc.stringify({
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
now = now,
trackers = tracker,
distance = distance,
coverage = coverage,
hidden_nodes = hidden_nodes,
total_node_route_count = total_node_route_count
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
}, true))
f:close()
end
-- Save valid (unblocked) rf mac list for use by OLSR
if config.enable and phy ~= "none" then
if pending_count > 0 or leafs > 0 then
os.remove( "/tmp/lqm." .. phy .. ".macs")
else
local tmpfile = "/tmp/lqm." .. phy .. ".macs.tmp"
f = io.open(tmpfile, "w")
if f then
for _, track in pairs(tracker)
do
if track.device == wlan and is_connected(track) and not track.blocked then
f:write(track.mac .. "\n")
end
end
f:close()
filecopy(tmpfile, "/tmp/lqm." .. phy .. ".macs", true)
os.remove(tmpfile)
end
end
end
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
wait_for_ticks(60) -- 1 minute
end
end
return lqm