bugfix: Remove references to WRT54*'s

This commit is contained in:
Conrad Lara - KG6JEI 2015-03-11 16:40:31 -07:00
parent 7a5076bc83
commit 0b04c442dd
1 changed files with 11 additions and 11 deletions

View File

@ -279,11 +279,10 @@ In the <strong>WiFi</strong> box there are settings shown as being
Active Settings. These settings can be changed without rebooting the node by
clicking the <strong>Apply</strong> button, but unless they are saved they
will revert to the previously saved values after a reboot.<br> <br>
The <strong>Rx Antenna</strong> and <strong>Tx Antenna</strong> settings of
Right and Left are from the point of view from the front of the router. This
is valid for the WRT54GL, but it is not unreasonable to expect that they may
be reversed for some other router models. If you find this to be the case,
contact the webmaster and it will be accounted for in the firmware.
The <strong>Rx Antenna</strong> and <strong>Tx Antenna</strong> settings are
named to match either the printed name on the antenna connector or in the
case of units that have a built in antenna the names are for units mounted
in its normal orientation.
</p>
<p>
The <strong>Distance</strong> setting adjusts the packet retry timer
@ -699,12 +698,13 @@ How to use failsafe mode:
Now power cycle the node and it should accept your new password.
</p>
<p>
But be warned, I have a version 2 wrt54g for which this method does not
work. Currently it is the only model I am aware of which does not work. If it
doesn't work, you are Simply Outta Luck unless you can get someone with an
authorized ssh key to log in to the node and help you. Failing that, your last
resort is to use the <a href='#tftp'>tftp method</a> described in a separate
article to reinstall the firmware.
If the device has a reset button you may instead press and hold the reset
button for 15 seconds which will cause the unit to behave as if it had
just been flashed with the AREDN&trade; firmware.
</p>
<p>
You would need to go through the node settings again just as if it was
the first time installing the AREDN&trade; firmware on the node.
</p>
<br><hr width=500><br>