AE6XE
31032615a7
merge: bugfix: rssi_monitor increase tolerance on test one notch
2016-01-09 21:02:55 -08:00
AE6XE
97d48c2b84
bugfix: rssi_monitor increase tolerance on test one notch
2016-01-09 21:00:09 -08:00
AE6XE
c21b4f7b35
bugfix: removed Strongest Selection from Archive chart
2016-01-09 20:55:53 -08:00
Conrad Lara - KG6JEI
bb10ca7faf
Merge branch 'FirewallIncludes' into develop
2016-01-09 19:48:18 -08:00
Conrad Lara - KG6JEI
01893b50d0
Merge branch 'DecreaseBeacons' into develop
2016-01-09 18:14:29 -08:00
Conrad Lara - KG6JEI
813c4cefcf
feature: Decrease WIFI Beacon rate in Mesh mode to around 2 times a second.
...
This changes the beacon rate from once every 100tu's to once every 500tu's
1tu=1024 microseconds
This will decrease the amount of RF time being used by beacon packets.
This is especially important on 900MHz and 2.4GHz using 5MHz wide channels where 10 nodes beaconing 10x a second at ~256kbit/s can use up around 45% of the RF channel in beacons alone.
Other bands and channels and widths are not expected to see as significant an advantage due to the faster data rates.
2016-01-09 17:39:44 -08:00
Conrad Lara - KG6JEI
e8b2ffd7ea
feature: FirewallIncludes: Migrate tunnel firewal rules to new include format.
...
These rules setup chains that may be needed by other firewall rules as such we need to set them up early to be sure includes work.
2016-01-09 16:24:54 -08:00
Conrad Lara - KG6JEI
477a20d55a
feature: FirewallIncludes: Add program that will auto include firewall rules that are in a set directory.
...
This is the basis for allowing packages to contain firewall rules that can be just dropped in a folder at install time.
2016-01-09 16:24:45 -08:00
Conrad Lara - KG6JEI
5c87a894c9
license: Add license header to vtun_up file
2016-01-09 15:10:58 -08:00
Trevor Paskett - K7FPV
5e30a3d49f
Merge branch 'ntp' into develop
2016-01-08 21:10:24 -07:00
Trevor Paskett - K7FPV
6f3cb97ea2
fix new lines
2016-01-08 21:09:38 -07:00
Trevor Paskett - K7FPV
ad8e3c0605
revert validate_hostname change
2016-01-08 18:05:31 -07:00
Trevor Paskett - K7FPV
44ab46bc87
move new settings to optional area under table, disable ntp server, ntp server fqdn validation
2016-01-08 18:04:25 -07:00
Trevor Paskett - K7FPV
c6d02d964a
change timezone to time_zone
2016-01-08 11:50:45 -07:00
Trevor Paskett - K7FPV
7653acc333
Merge branch 'develop' into ntp
2016-01-08 11:11:13 -07:00
Trevor Paskett - K7FPV
6f97c52565
add time zone and ntp server to setup page
2016-01-08 10:58:22 -07:00
Darryl Quinn
f62a6d43fa
re-inserted antenna message
2016-01-06 14:47:52 -06:00
Darryl Quinn
cb1bd15823
resized distance field, changed is_online technique
2016-01-06 14:36:40 -06:00
Darryl Quinn
c9b2670d99
removed unnecessary comment
2016-01-06 14:25:09 -06:00
Darryl Quinn
779f33e8fc
removed lat/lon/grid from admin page (moved to setup)
2016-01-06 10:46:59 -06:00
Darryl Quinn
d55f6de4cf
bugfix: removed global css border change
2016-01-06 10:46:27 -06:00
Darryl Quinn
4f2d68bc08
feature: added lat/lon/gridsquare fields and map to capture them
2016-01-06 10:23:18 -06:00
Darryl Quinn
07f447313f
default wifi distance to 0, disallow saving with 0 value, change alert to show on 0
2016-01-05 23:09:34 -06:00
Darryl Quinn
1e24cda1f1
change chart back to spline type
2016-01-05 22:12:24 -06:00
Darryl Quinn
2b2ec5c1fd
removed erroneous reference to Broadband-Hamnet from copyright
2016-01-05 22:11:44 -06:00
Trevor Paskett - K7FPV
4372605f8f
merge: jsoninfo into develop
2016-01-05 11:02:37 -07:00
Trevor Paskett - K7FPV
1cb016dc77
merge: feature: add jsoninfo to olsr and open firewall for ports 9090
2016-01-05 11:00:49 -07:00
Trevor Paskett - K7FPV
3359c44ca7
feature: add jsoninfo to olsr and open firewall ports 9090
2016-01-05 11:00:22 -07:00
Darryl Quinn
16b4e8c798
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into develop
...
* 'develop' of ssh://git.aredn.org/aredn_ar71xx:
feature: TxMbps--Added Mesh Status Help Section and minor code enhancements
bugfix: snrlog better handle neighbor references from mac to ip to hostname
hardware: Add testing support for AirRouter HP
2016-01-04 22:42:34 -06:00
Darryl Quinn
a1bc4fa35b
feature: distance value calculation in km or miles
2016-01-04 22:41:27 -06:00
AE6XE
3c235a0c62
merge: feature: TxMbps--Added Mesh Status Help Section and minor code enhancements
...
dd
2016-01-01 16:10:36 -08:00
AE6XE
0cf75af9df
feature: TxMbps--Added Mesh Status Help Section and minor code enhancements
2016-01-01 16:08:02 -08:00
AE6XE
38209b0af2
bugfix: snrlog better handle neighbor references from mac to ip to hostname
2015-12-30 17:57:49 -08:00
Conrad Lara - KG6JEI
cc6d4ee550
hardware: Add testing support for AirRouter HP
...
board.info
{{{
board.sysid=0xe4b2
board.cpurevision=0x00000101
board.name=AirRouter
board.shortname=LAP
board.subtype=HP
board.netmodes=15
board.hwaddr=687251449BBD
board.reboot=50
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe4b2
radio.1.subvendorid=0x0777
radio.1.txpower.max=28
radio.1.txpower.min=-4
radio.1.txpower.offset=9
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=6
}}}
2015-12-28 22:48:13 -08:00
Conrad Lara - KG6JEI
2dfc911df7
Merge branch 'release-3.15.1.0' into develop
...
Conflicts:
files/www/cgi-bin/mesh
2015-12-22 08:45:09 -08:00
AE6XE
91ad5613fe
feature: Add TxMbps to mesh status
2015-12-21 18:26:45 -08:00
Conrad Lara - KG6JEI
9c21a18f3f
bugfix: IP selection dropdown list is empty on dhcp reseveration/ports page.
2015-12-20 18:52:10 -08:00
Conrad Lara - KG6JEI
d6db48fb48
bugfix: Services were not lined up correctly on mesh status page.
...
Correct services to be correctly lined up.
Note:
It looks like we need to split the two tables eventually on the mesh status page as the services are pushed to the right.
Saving this however to be done in a future release as we may be doing a revamp of this page for sortable fields in the near future and this would fit in with that.
2015-12-16 21:42:43 -08:00
Conrad Lara - KG6JEI
9d0b7d59e1
Revert "bugfix: Services were not lined up correctly on mesh status page."
...
This reverts commit b223259f4f
.
The change was made in the wrong location of the mesh status page.
2015-12-16 21:41:19 -08:00
Conrad Lara - KG6JEI
b223259f4f
bugfix: Services were not lined up correctly on mesh status page.
...
Correct services to be correctly lined up.
Note:
It looks like we need to split the two tables eventually on the mesh status page as the services are pushed to the right.
Saving this however to be done in a future release as we may be doing a revamp of this page for sortable fields in the near future and this would fit in with that.
2015-12-16 21:33:16 -08:00
AE6XE
02a271503e
Merge: feature: enhance snrlog to squareLine, local TZ, fix test condition
2015-12-15 22:47:20 -08:00
AE6XE
265d2eb196
feature: enhance snrlog to squareLine, local TZ, fix test condition
2015-12-15 22:45:29 -08:00
AE6XE
fb224eebc0
Merge: bugfix: resolved rssi shift condition that needed a noise floor calibration
2015-12-14 21:47:24 -08:00
AE6XE
d33726e893
bugfix: resolved rssi shift condition that needed a noise floor calibration
2015-12-14 21:44:08 -08:00
AE6XE
ad856844bf
feature: enhance snrlog to handle neigbors dropping in and out and leaving mesh
2015-12-14 20:55:07 -08:00
Darryl Quinn
b2c4913680
default any error conditions to -95
2015-12-13 15:07:46 -06:00
Darryl Quinn
aa6dbe41d6
minor adjustment to interfaces and hosts (change to array)
2015-12-12 17:33:54 -06:00
Darryl Quinn
839718cc89
minor adjustment to interfaces and hosts (change to array)
2015-12-12 17:19:52 -06:00
AE6XE
a98213f080
Merge: feature: AREDN banner
2015-12-11 15:39:39 -08:00
AE6XE
f6c134fe7c
feature: AREDN banner
2015-12-11 15:38:45 -08:00