62e95f1409
build: README add device status and openwrt URL correction
2018-06-22 07:47:40 -07:00
bc27c4c863
build: update to OpenWRT 18.06 branch and README
2018-06-15 21:45:24 -05:00
8cbc9a1435
hardware: add aredn definition for mikrotik 912uag-5hpnd
...
Mikrotik RouterBOARD 912UAG-5HPnD or BaseBox 5 definition
2018-06-15 17:50:18 -05:00
d66a7e8842
bugfix: sysupgrade no longer supports -d option
2018-05-19 07:12:14 -07:00
9fd3f30934
ar71xx: Add Support for the TP-LINK CPE210 V2.0 Device
...
Once Support for the TP-LINK CPE210 V2.0 gets added to the OpenWrt code we will need to drop the patch 001-add_support_for_TP-Link_CPE210_v2.patch
2018-05-15 21:20:44 -07:00
68c1ba7fa9
bugfix: ubnt uboot firmware check fails via tftp
...
newer versions of Ubiquiti uboot constrain
the firmware header version sting. Current
openwrt formated versioning results in a
uboot firmware check error
2018-05-13 23:11:51 -05:00
7ee18ed05b
hardware: add tplink cpe510 v1.1 aredn device definition
...
Power settings at or below vendor max specs. Some channels
further limited within driver likely from vender
flash config data settings
2018-05-13 23:11:51 -05:00
3e4e6270b7
feature: add bootloader version to supporttool output ( #8 )
...
* feature: add U-Boot version to supporttool output
* feature: add bootloader version to supporttool output
2018-05-13 23:02:57 -05:00
d33df3dab7
aredn: define vlans for aredn devices ( #7 )
...
aredn devices configured with lan, wan, and dtdlink
networks.
2018-05-03 00:07:55 -05:00
d090ba8038
fix prebuild shellcheck tests to run properly with external sources ( #5 )
2018-05-02 22:16:03 -05:00
c0f368809e
update contributors file to add KK4ZUZ ( #6 )
2018-05-02 22:11:34 -05:00
7f78757bc2
correct issues in files so build test will pass without issue ( #4 )
...
* correct issues in files so build test will pass without issue
* correct issues in files so build test will pass without issue
2018-05-02 19:42:04 -05:00
b344a73505
bugfix: update dnsmasq procd scripts
...
Pull forward AREDN 3.16.1.1 procd scripts in sync with
usage of OLSR
2018-04-27 18:41:03 -07:00
01b30a4c63
aredn: port ar71xx_board_name
2018-03-31 21:26:49 -07:00
5d09d7e005
aredn: port customized MeshNode SSID
2018-03-31 08:51:01 -07:00
8dad202d0e
aredn: update and port customized banner
2018-03-31 08:43:39 -07:00
2626060908
busybox: port AREDN usage of telnet from 3.16.1.1
2018-03-31 08:42:36 -07:00
31dbc2c552
bugfix: enable dnsmasq in 18.01.x
2018-03-31 08:36:14 -07:00
8bc2921d88
build: upgrade to openwrt 18.01.x
2018-03-31 08:31:42 -07:00
714fb257c5
aredn: port part97 extended spectrum to openwrt 18.01.x
...
This commit requires US FCC Part 97 licensing
or equivilent in your country. Ported from
AREDN 3.16.1.1 release
2018-03-30 15:41:44 -07:00
770fe43e23
aredn: upgrade setup_aredn_include to new generate_led
2018-03-29 23:55:55 -07:00
1fc7a926ab
bugfix: fix scripts to current standards
...
local can only be used in a function
2018-03-29 22:00:19 -07:00
b7cacc3d18
package: olsr: AREDN upgrade to 0.9.6.2
2018-03-29 21:03:16 -07:00
72322e2e6e
build: update aredn_packages and openwrt repo references to develop branch
2018-03-23 00:43:31 -07:00
91ee8671b6
build: create top level make structure
2018-03-23 00:39:07 -07:00
8c5be0cf0b
hardware: Add definition for 0xe6e5 PBE-M5-400-ISO
...
{{{
board.sysid=0xe6e5
board.cpurevision=0x00001122
board.name=PowerBeam? M5
board.shortname=P5B
board.subtype=400-ISO
board.netmodes=7
board.hwaddr=F09FC24EEF7E
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe6e5
radio.1.subvendorid=0x0777
radio.1.txpower.max=26
radio.1.txpower.min=-4
radio.1.txpower.offset=4
radio.1.ieee_modes=5
radio.1.antennas=2
radio.1.def_antenna=1
radio.1.antenna.1.id=1
radio.1.antenna.1.name=400
radio.1.antenna.1.gain=25
radio.1.antenna.1.builtin=1
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Horizontal
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Vertical
radio.1.antenna.2.id=2
radio.1.antenna.2.name=Feed only
radio.1.antenna.2.gain=3
radio.1.antenna.2.builtin=1
radio.1.antenna.2.chains=2
radio.1.antenna.2.chain.1.id=0
radio.1.antenna.2.chain.1.name=Horizontal
radio.1.antenna.2.chain.2.id=1
radio.1.antenna.2.chain.2.name=Vertical
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=4
feature.ext_reset=0
}}}
ref AREDN->ticket:253
Change-Id: Iec7080fa73ed0c03402b85daef870f6be45d1d95
2018-02-28 03:40:03 +00:00
f9a74b709d
hardware: Add RM2T 0xe1d2 device config
...
Adds testing support for the Rocket M2 Titanim
{{{
TI.v5.5# cat /etc/board.info
board.sysid=0xe1d2
board.cpurevision=0x00002122
board.name=Rocket M2 Titanium
board.shortname=R2T
board.subtype=
board.netmodes=7
board.hwaddr=DC9FDB061725
board.reboot=30
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=9192
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe1d2
radio.1.subvendorid=0x0777
radio.1.txpower.max=28
radio.1.txpower.offset=10
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
}}}
Change-Id: I86308a1f6331eb9edc0366fccd172b93d7be2e08
2018-02-03 10:41:07 -08:00
98b72b5159
hardware: Add testing support for RM5T
...
Adds testing support for the Rocket M5 Titanium
{{{
board.sysid=0xe4d5
board.cpurevision=0x00002122
board.name=Rocket M5 Titanium
board.shortname=R5T
board.subtype=GPS
board.netmodes=7
board.hwaddr=0418D60C3216
board.reboot=40
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
board.gps=1
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe4d5
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
}}}
ref AREDN->ticket:252
Change-Id: I9b1c4bb1fda5bee4ed9efd98ec717a9fcd5baace
2018-02-03 10:23:05 -08:00
69937359c3
bugfix: correct rfband settings for 0xe235 NBM5 model
...
Change-Id: Iae180905820fb5827fefb002662ad3db1c9f5551
2017-12-04 19:12:49 -08:00
d18d14f326
hardware: Add ubnt NSM2 Loco XW 0xe867 device config
...
{{{
board.sysid=0xe867
board.cpurevision=0x00001122
board.name=NanoStation Loco M2
board.shortname=LM2
board.subtype=
board.netmodes=7
board.hwaddr=687251704683
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe867
radio.1.subvendorid=0x0777
radio.1.txpower.max=23
radio.1.txpower.min=-4
radio.1.txpower.offset=2
radio.1.ieee_modes=10
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Built in
radio.1.antenna.1.gain=8
radio.1.antenna.1.builtin=1
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Horizontal
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Vertical
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=4
feature.ext_reset=0
}}}
ref AREDN->ticket:246
Change-Id: I4248ef878bebc9cf1ee356801c3ac659507af789
2017-10-28 03:59:15 +00:00
3580a9a555
hardware: Add ubnt NSM2 XW 0xe866 device config
...
{{{
board.sysid=0xe866
board.cpurevision=0x00001122
board.name=NanoStation? M2
board.shortname=N2N
board.subtype=
board.netmodes=7
board.hwaddr=687251720121
board.reboot=40
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe866
radio.1.subvendorid=0x0777
radio.1.txpower.max=28
radio.1.txpower.min=-4
radio.1.txpower.offset=6
radio.1.ieee_modes=10
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Built in
radio.1.antenna.1.gain=11
radio.1.antenna.1.builtin=1
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Horizontal
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Vertical
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=4
feature.ext_reset=0
}}}
ref AREDN->ticket:247
Change-Id: Iefae267d47561fb83d0ca400b8f77155c32d31b2
2017-10-26 19:48:03 -07:00
17b9d5357c
Merge branch 'release-3.17.1.0' into develop.
...
Bring current changes in release to develop to allow
development to continue.
Change-Id: I6c6e44026978ac4f938e687d540d476e5e8a610e
2017-10-01 11:36:00 -07:00
be514ffb5d
bugfix: sysinfo.json not returning all services properly
...
Change-Id: I2b796a9ae03ef979d0776a9c2285354c60fb49f7
2017-09-14 14:22:18 +00:00
d5b06415c2
bugfix: charts realtime default language corrected
...
fixes AREDN->ticket:233
Change-Id: I4ccc1051bf9e008cb320e6eac07f8fa67bc96234
2017-08-30 02:38:37 +00:00
7eeb7164f7
feature: add meminfo to supporttool
...
Change-Id: Id301b511567b14192369744ef3f0b54886191ace
2017-04-29 20:58:15 -05:00
f532ee6a40
bugfix: tun_client connection does not persist/retry
...
refs AREDN->ticket:229
Change-Id: I843bd2eb7c6d88ec4917e52cfc5bbdfaeda9f4c0
2017-04-26 12:06:24 -05:00
e5fc675cfc
bugfix: OTA Upgrade fails with static WAN.
...
Wan interface settings are not correctly copied
over after an OTA causing node-setup to fail
when using a static WAN ip.
fixes->AREDN🎫 226
Change-Id: I494c05bc0047f1db4c1452cbdbd8e236f4fcd945
2017-04-20 12:41:09 -07:00
60e2310917
bugfix: Remove references to Status 4 LED
...
AirRouter does not have a Status 4 LED.
The Power LED does similar to the Status 4 on the AirRouter.
Changing the text to be more generic removing reference
to LED's and leave the documentation of how to know
a node has booted to be done elsewhere.
fixes AREDN->ticket:208
Change-Id: I8821f86e89e17d25e4a21abfdd94d989619d081a
2017-04-12 02:32:44 +00:00
835d7e021c
bugfix: Upgrades of packages leaves node in upgrade mode.
...
Due to the removal of odhcpd in
I0897be587cd1f46da758dda3efe65aea32c8a965
uploadctlservices no longer returns successfully.
Remove odhcpd to allow to return correctly.
Change-Id: I8e4bc2ff5846b793e31ce5ffedfba91806df7ed1
2017-04-11 19:26:28 -07:00
474c7e4b86
build: bugfix: Set package repo URL on release build
...
For example when building 3.17.1.0b01 for Ubiquiti devices
packages would be found at:
http://downloads.aredn.org/releases/3/17/3.17.1.0b01/ar71xx/generic/packages/
This makes BUILD_SET_VERSION setable only for release builds
and not snapshots or development builds.
Change-Id: Ie6218c5e935c48475ed77023131314a7bef890ef
2017-04-09 05:41:04 +00:00
2415c56c3e
bugfix: sysupgrade needs more tmpfs space.
...
Increase space on tmpfs just before launching sysupgrade
when the device has had tmpfs limited to 6.5mb
Change-Id: I5b27e6812017c4cbe5d9cb3f53cb04d09892edf4
2017-04-04 23:31:50 -07:00
7d8496282b
bugfix: remove unnecessary packages in order to reduce memory footprint
...
Change-Id: I0897be587cd1f46da758dda3efe65aea32c8a965
2017-04-04 03:11:46 +00:00
a57d5cd08c
bugfix: olsrd-watchdog false reports
...
olsrd-watchdog can trigger when the olsrd service is restarted
Such as when a tunnel comes up, or when a config change is
made to olsrd.
procd already monitors olsrd and makes sure it remains running.
With procd we no longer need olsrd-watchdog and can remove it.
fixes AREDN->ticket:215
Change-Id: I5067d380a22bd0ab5e597746478ef3e1ba05d72d
2017-03-31 19:34:49 +00:00
9c0f5bf7c6
bugfix: DHCP Reservation allows duplicate hostname usage.
...
The DHCP Name reservation on the ports page would allow
a user to use the name of the mesh node as a hostname
for a reserved host which would mess up the remote display
of hosts on the mesh status screen.
In addition while testing the verification code it was found
that it was case sensitive while dns is case insensitive.
fixes AREDN->ticket:198
Change-Id: Ie51a594f733eca38e8547faeab0260d7b23b8818
2017-03-24 18:27:20 +00:00
507ceed577
bugfix: invalid lat/lon values when dragging marker across wrapped boundry
...
refs AREDN->ticket:221
Change-Id: Id60213e72428c86f51b17c9c137785e340bca3eb
2017-03-21 16:31:12 +00:00
8ee8fbefe0
bugfix: Increase available memory during upgrade/install process
...
It is possible for the system to run out of memory when dealing
with large file uploads and installs.
As part of the upgrade procedure shutdown services that are not
essential for node operations to allow more memory for install
to take place.
Includes changes to linkled to indicate this new state as it will
be shutdown as part of the cleanup process.
Memory gain (approximate)
dropbear 100kb
linkled 200kb
logd 200kb
odhcp 100kb
snmpd 500kb
xinetd 100kb
Total(approximate): 1200kb (around %4 on 32mb devices)
This is somewhat similar to files/usr/local/bin/upgrade_kill_prep
except that it kills only a select group of services
so that the system can handle the file upload while
upgrade_kill_prep does the final system cleanup to run the full
upgrade.
ref AREDN->ticket:204
Change-Id: Ic6d3aa028725064a97c4723f6d9b36e1e51d87a7
2017-03-08 03:23:52 +00:00
a2208dbc5a
bugfix: Prevent users from uploading files when tunnels are active.
...
If a user tries to upload a file (especially firmware images) while
a tunnel is active the nodes run a high risk of running out of
available RAM.
Change-Id: I6c31a5c641c7266f337aa4b209367ae0491703ad
2017-03-05 16:57:37 -08:00
24a3243215
Bugfix: read_postdata() accepts files when not expected
...
Correct read_postdata() to only accept files from pages that are
specifically designed to accept files.
This should be limited to authenticated pages only.
SCS-2017-001
Change-Id: Ic40f19a88e543d83a8097abcd4e7254ccea90f49
2017-03-05 02:45:04 +00:00
8e08363414
bugfix: extend admin page reload time after reboot to 3 mins
...
Change-Id: Iffa664bf495fdb20d1d8450e00457722399bfcbf
2017-02-08 03:55:22 +00:00
956c6b7cd8
bugfix: change charts to be time linear
...
Change-Id: I06e0c8d1d5d39e9faa46bfec3442bf2e3071c8ff
2017-02-03 16:34:25 +00:00
Joe AE6XE