aredn/files/www/cgi-bin
Conrad Lara - KG6JEI bb83809472 hardware: Testing support for CPE210 v1.1
Add board definition for CPE210 v1.1 in testing mode.

{{{
 ========== iw phy phy0 info ==========
 Wiphy phy0
	max # scan SSIDs: 4
	max scan IEs length: 2257 bytes
	max # sched scan SSIDs: 0
	max # match sets: 0
	Retry short limit: 7
	Retry long limit: 4
	Coverage class: 9 (up to 4050m)
	Device supports AP-side u-APSD.
	Device supports T-DLS.
	Available Antennas: TX 0x3 RX 0x3
	Configured Antennas: TX 0x3 RX 0x3
	Supported interface modes:
		 * IBSS
		 * managed
		 * AP
		 * AP/VLAN
		 * WDS
		 * monitor
		 * mesh point
		 * P2P-client
		 * P2P-GO
		 * outside context of a BSS
	Band 1:
		Capabilities: 0x11ef
			RX LDPC
			HT20/HT40
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT TX/RX MCS rate indexes supported: 0-15
		Frequencies:
			* 2397 MHz [-2] (30.0 dBm)  <-- This is kernel fallback when channel is
			* 2402 MHz [-1] (30.0 dBm)  <-- not defined in radio EEPROM, set to 22 instead
			* 2412 MHz [1] (22.0 dBm)
			* 2417 MHz [2] (23.0 dBm)
			* 2422 MHz [3] (23.0 dBm)
			* 2427 MHz [4] (23.0 dBm)
			* 2432 MHz [5] (23.0 dBm)
			* 2437 MHz [6] (23.0 dBm)
			* 2442 MHz [7] (23.0 dBm)
			* 2447 MHz [8] (23.0 dBm)
			* 2452 MHz [9] (23.0 dBm)
			* 2457 MHz [10] (23.0 dBm)
			* 2462 MHz [11] (23.0 dBm)
			* 2467 MHz [12] (30.0 dBm)  <-- This is also kernel fallback
			* 2472 MHz [13] (30.0 dBm)  <-- Set to 23 instead as that was was above
			* 2484 MHz [14] (30.0 dBm)
	valid interface combinations:
		 * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1,
		   total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz }
		 * #{ WDS } <= 2048,
		   total <= 2048, #channels <= 1, STA/AP BI must match
	HT Capability overrides:
		 * MCS: ff ff ff ff ff ff ff ff ff ff
		 * maximum A-MSDU length
		 * supported channel width
		 * short GI for 40 MHz
		 * max A-MPDU length exponent
		 * min MPDU start spacing
}}}

ref AREDN->ticket:183

Change-Id: I00e52b80ce5f8e8a774c7bae7d946a6dab73bacf
2016-09-18 17:49:46 +00:00
..
admin bug fix: run sysupgrade forked off from uhttpd, kill un-necessary processes and flush page cache during firmware upgrade 2016-03-08 20:29:35 -07:00
channelmaps.pm bugfix: Channel "0" means "Problem" inside the kernel. 2015-06-18 18:35:41 -07:00
fwinfo Rerand from BBHN to AREDN(TM) 2015-03-09 16:39:04 -07:00
mesh bugfix: TxMbps compatibility with Chaos Calmer 2016-08-12 15:42:59 +00:00
perlfunc.pm hardware: Testing support for CPE210 v1.1 2016-09-18 17:49:46 +00:00
ports remove non-mesh modes from setup options 2016-08-07 21:38:18 +00:00
scan feature: sortable columns in wifi scan 2015-06-09 23:39:10 -05:00
setup change AREDN upload to only pull /links from OLSR 2016-08-24 20:40:47 -05:00
signal enhancement: make snr chart fill more of the screen 2016-08-19 15:08:55 -05:00
signal.json fixes AREDN->ticket:163 2016-05-31 23:01:26 -07:00
status remove non-mesh modes from setup options 2016-08-07 21:38:18 +00:00
supporttool bugfix: add rssi_monitor data and logfiles to download support data 2015-11-03 20:32:36 -08:00
sysinfo bugfix: Cleanup display of rebraned pages. 2015-03-09 19:28:59 -07:00
sysinfo.json enhancement: add services to sysinfo.json api 2016-09-05 19:23:54 +00:00
tunfunc.pm bugfix: Migrate vtund firewall rules to the new firewall system. 2016-02-24 21:06:03 -08:00
ucifunc.pm bugfix: could not delete client connections from vpnc page 2016-06-16 22:37:41 -05:00
vpn bugfix: added tunnel network address constraints. 2016-08-25 03:12:41 +00:00
vpnc bugfix: could not delete client connections from vpnc page 2016-06-16 22:37:41 -05:00