Adding AR-15 Treillage Stock by Warfairy.

Rifles/AR-15_Treillage_Stock-Warfairy/README.md

@@ -0,0 +1,44 @@
+# Treillage AR-15 Competition Stock 
+
+#### Version
+1.0
+
+#### Author
+Warfairy
+
+#### Description
+
+The Treillage AR-15 Competition Stock is meant to bring a low cost option to NRA High Power competition and 3-Gun for fully adjustable stocks. The milled ones I've seen go for 180 USD or more. What it does is give you a fully adjustable stock, including length of pull, camber, and cast. The clamp around the tube allows the user to move the stock arm 360 degrees around the buffer tube, the clamp around the stock arm allows the user to adjust the length of pull and angle of the rear plate, and finally, the rear plate is adjusted using a threaded rod to move the rear plate up and down in relation to the stock arm. You can now truly make your rifle fit your body with around 15 USD worth of materials.
+
+#### Required parts
+
+* 8x M3 16mm Socket Head Cap Screw (McMaster part number 95263A158)
+* 8x Type 316 Stainless Steel Belleville Spring Lock Washer (McMaster part number 93237A102)
+* 8x Zinc Yellow-Chromate Plated Steel Hex Nut (McMaster part number 92497A200)
+
+#### Printing
+
+All of the individual parts should be relatively easy prints. Ensure your support is on as there are overhangs on most of the parts.
+
+#### Assembly
+
+1. Place Rear_Adjust into slot of Arm. The threaded section should sit inside the channel of the Arm.
+
+2. Place Rear_Plate onto Arm assembly and thread Rear_Adjust into threaded tab of Rear_Plate, drawing it down until the top and bottom surfaces of Arm and Rear_Plate are approximately level.
+
+3. Place Base_2 onto the underside of your Carbine Buffer Tube, making sure that the peg rests in the rear most adjustment hole of the Buffer Tube Rail. Now Place Base_1 onto the top of the buffer tube such that the grooves in the Base align.
+
+4. Place Clamp_2 over the Base ring, ensuring smooth mating of the ridges with the grooves. Do the same with Clamp_1. Secure losely by placing nuts into appropriate slots in Clamp_1, and threading 16mm M3 screws and washers to clamp in place.
+
+5. Install Clamp_3 onto buffer tube assembly using same method as Clamp_1 and 2. Leave loose. Slide Arm Assembly into the clamp and lightly tighten Clamp assmebly onto the Arm.
+
+6. Adjust stock as desired. When optimum position is attained, tighten down all 8 M3 screws to lock in place. Rear_Plate may be adjusted using a coin or large screw driver. Installation is complete.
+
+#### Author's notes
+
+I really like this one, and I hope it works. All credit to duces of the #FOSSCAD channel on irc.oftc.net for the idea. If you have questions, concerns, gripes, complaints, or just want to talk to us, swing by www.fosscad.org/fc/chat
+
+As always,
+
+You are free men. Act like it.
+-WarFairy

Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_1.step

@@ -0,0 +1,504 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Trellais_Base_1.step',
+    '2016-04-19T10:44:26',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2015',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#2 = ORIENTED_EDGE ( 'NONE', *, *, #242, .T. ) ;
+#3 = STYLED_ITEM ( 'NONE', ( #381 ), #236 ) ;
+#4 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#5 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#6 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#7 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #14 ) ;
+#8 = ORIENTED_EDGE ( 'NONE', *, *, #282, .F. ) ;
+#9 = ORIENTED_EDGE ( 'NONE', *, *, #201, .T. ) ;
+#10 = AXIS2_PLACEMENT_3D ( 'NONE', #220, #64, #298 ) ;
+#11 = AXIS2_PLACEMENT_3D ( 'NONE', #458, #473, #467 ) ;
+#12 = ADVANCED_FACE ( 'NONE', ( #435 ), #230, .T. ) ;
+#13 = EDGE_LOOP ( 'NONE', ( #472, #437, #88, #39 ) ) ;
+#14 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#15 = AXIS2_PLACEMENT_3D ( 'NONE', #422, #188, #1 ) ;
+#16 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#17 = ADVANCED_FACE ( 'NONE', ( #464 ), #285, .T. ) ;
+#18 = PRODUCT_CONTEXT ( 'NONE', #59, 'mechanical' ) ;
+#19 = PLANE ( 'NONE',  #436 ) ;
+#20 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#21 = ORIENTED_EDGE ( 'NONE', *, *, #174, .F. ) ;
+#22 = VERTEX_POINT ( 'NONE', #5 ) ;
+#23 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#24 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#25 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#26 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#27 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #311, #124 ) ;
+#28 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#29 = ORIENTED_EDGE ( 'NONE', *, *, #319, .F. ) ;
+#30 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#31 = AXIS2_PLACEMENT_3D ( 'NONE', #146, #23, #20 ) ;
+#32 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#33 = ORIENTED_EDGE ( 'NONE', *, *, #261, .F. ) ;
+#34 = SURFACE_SIDE_STYLE ('',( #385 ) ) ;
+#35 = AXIS2_PLACEMENT_3D ( 'NONE', #91, #274, #468 ) ;
+#36 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#37 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#38 = ORIENTED_EDGE ( 'NONE', *, *, #160, .T. ) ;
+#39 = ORIENTED_EDGE ( 'NONE', *, *, #180, .T. ) ;
+#40 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#41 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #237, #42 ) ;
+#42 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #261, .T. ) ;
+#44 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#45 = AXIS2_PLACEMENT_3D ( 'NONE', #179, #480, #216 ) ;
+#46 =( CONVERSION_BASED_UNIT ( 'INCH', #299 ) LENGTH_UNIT ( ) NAMED_UNIT ( #116 ) );
+#47 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #74, #62 ) ;
+#48 = AXIS2_PLACEMENT_3D ( 'NONE', #103, #105, #77 ) ;
+#49 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#50 = ADVANCED_FACE ( 'NONE', ( #457 ), #452, .T. ) ;
+#51 = SURFACE_STYLE_USAGE ( .BOTH. , #53 ) ;
+#52 = ORIENTED_EDGE ( 'NONE', *, *, #277, .F. ) ;
+#53 = SURFACE_SIDE_STYLE ('',( #308 ) ) ;
+#54 = AXIS2_PLACEMENT_3D ( 'NONE', #73, #438, #192 ) ;
+#55 = FILL_AREA_STYLE ('',( #86 ) ) ;
+#56 = ORIENTED_EDGE ( 'NONE', *, *, #250, .T. ) ;
+#57 = EDGE_LOOP ( 'NONE', ( #301, #270, #29, #466 ) ) ;
+#58 = VERTEX_POINT ( 'NONE', #373 ) ;
+#59 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#60 = AXIS2_PLACEMENT_3D ( 'NONE', #297, #30, #300 ) ;
+#61 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #59 ) ;
+#62 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #14, 'design' ) ;
+#63 = ORIENTED_EDGE ( 'NONE', *, *, #304, .F. ) ;
+#64 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#65 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #200 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #279, #98, #314 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#66 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#67 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#68 = ORIENTED_EDGE ( 'NONE', *, *, #248, .F. ) ;
+#69 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#70 = EDGE_LOOP ( 'NONE', ( #485, #21, #78, #80, #302, #397, #79, #233, #432, #474, #2, #195 ) ) ;
+#71 = PRODUCT ( 'Trellais_Base_1', 'Trellais_Base_1', '', ( #18 ) ) ;
+#72 = AXIS2_PLACEMENT_3D ( 'NONE', #433, #161, #254 ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#74 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #71, .NOT_KNOWN. ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ;
+#76 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#77 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#78 = ORIENTED_EDGE ( 'NONE', *, *, #164, .T. ) ;
+#79 = ORIENTED_EDGE ( 'NONE', *, *, #234, .T. ) ;
+#80 = ORIENTED_EDGE ( 'NONE', *, *, #360, .F. ) ;
+#81 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #126, #128 ) ;
+#82 = AXIS2_PLACEMENT_3D ( 'NONE', #463, #410, #396 ) ;
+#83 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#84 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#85 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #280, #232 ) ;
+#86 = FILL_AREA_STYLE_COLOUR ( '', #312 ) ;
+#87 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#88 = ORIENTED_EDGE ( 'NONE', *, *, #350, .F. ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#90 =( CONVERSION_BASED_UNIT ( 'INCH', #318 ) LENGTH_UNIT ( ) NAMED_UNIT ( #44 ) );
+#91 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#92 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#93 = EDGE_LOOP ( 'NONE', ( #137, #246, #240, #225 ) ) ;
+#94 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #71 ) ) ;
+#95 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#96 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#97 = EDGE_LOOP ( 'NONE', ( #430, #486, #455, #184, #295, #224, #114, #245, #149, #487, #9, #460 ) ) ;
+#98 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#99 = AXIS2_PLACEMENT_3D ( 'NONE', #317, #284, #40 ) ;
+#100 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#101 = AXIS2_PLACEMENT_3D ( 'NONE', #208, #214, #218 ) ;
+#102 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ;
+#103 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ;
+#104 = ORIENTED_EDGE ( 'NONE', *, *, #325, .F. ) ;
+#105 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#106 = ADVANCED_FACE ( 'NONE', ( #459 ), #450, .T. ) ;
+#107 = ORIENTED_EDGE ( 'NONE', *, *, #242, .F. ) ;
+#108 = ADVANCED_FACE ( 'NONE', ( #453 ), #227, .F. ) ;
+#109 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#110 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #375, #440 ) ;
+#111 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#112 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#113 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #46, 'distance_accuracy_value', 'NONE');
+#114 = ORIENTED_EDGE ( 'NONE', *, *, #282, .T. ) ;
+#115 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#116 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#117 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#118 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#119 = ORIENTED_EDGE ( 'NONE', *, *, #319, .T. ) ;
+#120 = ORIENTED_EDGE ( 'NONE', *, *, #288, .T. ) ;
+#121 = AXIS2_PLACEMENT_3D ( 'NONE', #247, #244, #243 ) ;
+#122 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#123 = VERTEX_POINT ( 'NONE', #37 ) ;
+#124 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#125 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #3 ) ) ;
+#126 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#127 = EDGE_CURVE ( 'NONE', #348, #421, #454, .T. ) ;
+#128 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#129 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#130 = EDGE_LOOP ( 'NONE', ( #104, #38, #119, #145 ) ) ;
+#131 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#134 = EDGE_CURVE ( 'NONE', #283, #58, #461, .T. ) ;
+#135 = ORIENTED_EDGE ( 'NONE', *, *, #250, .F. ) ;
+#136 = VERTEX_POINT ( 'NONE', #197 ) ;
+#137 = ORIENTED_EDGE ( 'NONE', *, *, #219, .T. ) ;
+#138 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#139 = ADVANCED_FACE ( 'NONE', ( #444 ), #441, .T. ) ;
+#140 = AXIS2_PLACEMENT_3D ( 'NONE', #293, #290, #305 ) ;
+#141 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#142 = PLANE ( 'NONE',  #264 ) ;
+#143 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#144 = EDGE_CURVE ( 'NONE', #405, #123, #451, .T. ) ;
+#145 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ;
+#146 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#147 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#148 = CLOSED_SHELL ( 'NONE', ( #108, #294, #139, #106, #173, #262, #207, #50, #456, #241, #337, #17, #169, #12 ) ) ;
+#149 = ORIENTED_EDGE ( 'NONE', *, *, #239, .F. ) ;
+#150 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#151 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#152 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#153 = EDGE_CURVE ( 'NONE', #462, #276, #445, .T. ) ;
+#154 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#155 = ORIENTED_EDGE ( 'NONE', *, *, #313, .T. ) ;
+#156 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#157 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#158 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Base_1', ( #236, #31 ), #249 ) ;
+#159 = ORIENTED_EDGE ( 'NONE', *, *, #190, .T. ) ;
+#160 = EDGE_CURVE ( 'NONE', #289, #265, #439, .T. ) ;
+#161 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#162 = AXIS2_PLACEMENT_3D ( 'NONE', #215, #212, #206 ) ;
+#163 = VERTEX_POINT ( 'NONE', #129 ) ;
+#164 = EDGE_CURVE ( 'NONE', #475, #22, #425, .T. ) ;
+#165 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#166 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#167 = VERTEX_POINT ( 'NONE', #287 ) ;
+#168 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#169 = ADVANCED_FACE ( 'NONE', ( #427 ), #257, .T. ) ;
+#170 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#171 = EDGE_CURVE ( 'NONE', #407, #193, #418, .T. ) ;
+#172 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#173 = ADVANCED_FACE ( 'NONE', ( #415 ), #380, .T. ) ;
+#174 = EDGE_CURVE ( 'NONE', #475, #309, #414, .T. ) ;
+#175 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#176 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
+#177 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#178 = ORIENTED_EDGE ( 'NONE', *, *, #201, .F. ) ;
+#179 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#180 = EDGE_CURVE ( 'NONE', #123, #470, #416, .T. ) ;
+#181 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#182 = EDGE_LOOP ( 'NONE', ( #63, #221, #75, #43 ) ) ;
+#183 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#184 = ORIENTED_EDGE ( 'NONE', *, *, #277, .T. ) ;
+#185 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#186 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #90, 'distance_accuracy_value', 'NONE');
+#187 = EDGE_CURVE ( 'NONE', #470, #475, #413, .T. ) ;
+#188 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#189 = ORIENTED_EDGE ( 'NONE', *, *, #164, .F. ) ;
+#190 = EDGE_CURVE ( 'NONE', #462, #421, #419, .T. ) ;
+#191 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#192 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#193 = VERTEX_POINT ( 'NONE', #89 ) ;
+#194 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#195 = ORIENTED_EDGE ( 'NONE', *, *, #304, .T. ) ;
+#196 = EDGE_CURVE ( 'NONE', #265, #315, #401, .T. ) ;
+#197 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#198 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#199 = ORIENTED_EDGE ( 'NONE', *, *, #144, .T. ) ;
+#200 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #279, 'distance_accuracy_value', 'NONE');
+#201 = EDGE_CURVE ( 'NONE', #283, #470, #402, .T. ) ;
+#202 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#203 = ORIENTED_EDGE ( 'NONE', *, *, #127, .F. ) ;
+#204 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #175, #172 ) ;
+#205 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#206 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#207 = ADVANCED_FACE ( 'NONE', ( #399 ), #392, .T. ) ;
+#208 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#209 = EDGE_CURVE ( 'NONE', #315, #477, #393, .T. ) ;
+#210 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#211 = ORIENTED_EDGE ( 'NONE', *, *, #350, .T. ) ;
+#212 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#213 = EDGE_CURVE ( 'NONE', #289, #278, #404, .T. ) ;
+#214 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#215 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#216 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#217 = ORIENTED_EDGE ( 'NONE', *, *, #153, .F. ) ;
+#218 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#219 = EDGE_CURVE ( 'NONE', #22, #283, #395, .T. ) ;
+#220 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#221 = ORIENTED_EDGE ( 'NONE', *, *, #313, .F. ) ;
+#222 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#223 = FILL_AREA_STYLE ('',( #423 ) ) ;
+#224 = ORIENTED_EDGE ( 'NONE', *, *, #255, .F. ) ;
+#225 = ORIENTED_EDGE ( 'NONE', *, *, #360, .T. ) ;
+#226 = EDGE_CURVE ( 'NONE', #462, #163, #394, .T. ) ;
+#227 = PLANE ( 'NONE',  #72 ) ;
+#228 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#229 = AXIS2_PLACEMENT_3D ( 'NONE', #266, #272, #205 ) ;
+#230 = PLANE ( 'NONE',  #110 ) ;
+#231 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#232 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#233 = ORIENTED_EDGE ( 'NONE', *, *, #196, .F. ) ;
+#234 = EDGE_CURVE ( 'NONE', #276, #315, #388, .T. ) ;
+#235 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#236 = MANIFOLD_SOLID_BREP ( 'Stock-Treillage_Base-1', #148 ) ;
+#237 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#238 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#239 = EDGE_CURVE ( 'NONE', #58, #421, #372, .T. ) ;
+#240 = ORIENTED_EDGE ( 'NONE', *, *, #288, .F. ) ;
+#241 = ADVANCED_FACE ( 'NONE', ( #383 ), #19, .F. ) ;
+#242 = EDGE_CURVE ( 'NONE', #278, #447, #365, .T. ) ;
+#243 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#244 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#245 = ORIENTED_EDGE ( 'NONE', *, *, #127, .T. ) ;
+#246 = ORIENTED_EDGE ( 'NONE', *, *, #134, .T. ) ;
+#247 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#248 = EDGE_CURVE ( 'NONE', #276, #348, #367, .T. ) ;
+#249 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #186 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #90, #87, #84 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#250 = EDGE_CURVE ( 'NONE', #278, #136, #363, .T. ) ;
+#251 = SURFACE_STYLE_USAGE ( .BOTH. , #34 ) ;
+#252 = ORIENTED_EDGE ( 'NONE', *, *, #234, .F. ) ;
+#253 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #3 ), #65 ) ;
+#254 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#255 = EDGE_CURVE ( 'NONE', #477, #407, #366, .T. ) ;
+#256 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#257 = PLANE ( 'NONE',  #48 ) ;
+#258 = EDGE_LOOP ( 'NONE', ( #420, #316, #120, #336 ) ) ;
+#259 = EDGE_LOOP ( 'NONE', ( #52, #135, #484, #465 ) ) ;
+#260 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#261 = EDGE_CURVE ( 'NONE', #405, #167, #362, .T. ) ;
+#262 = ADVANCED_FACE ( 'NONE', ( #361 ), #469, .F. ) ;
+#263 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#264 = AXIS2_PLACEMENT_3D ( 'NONE', #122, #118, #117 ) ;
+#265 = VERTEX_POINT ( 'NONE', #478 ) ;
+#266 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#267 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#268 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #47 ) ;
+#269 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#270 = ORIENTED_EDGE ( 'NONE', *, *, #255, .T. ) ;
+#271 = EDGE_CURVE ( 'NONE', #479, #136, #357, .T. ) ;
+#272 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#273 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#274 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#275 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#276 = VERTEX_POINT ( 'NONE', #398 ) ;
+#277 = EDGE_CURVE ( 'NONE', #136, #193, #354, .T. ) ;
+#278 = VERTEX_POINT ( 'NONE', #358 ) ;
+#279 =( CONVERSION_BASED_UNIT ( 'INCH', #377 ) LENGTH_UNIT ( ) NAMED_UNIT ( #202 ) );
+#280 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#281 = EDGE_LOOP ( 'NONE', ( #211, #286, #33, #199 ) ) ;
+#282 = EDGE_CURVE ( 'NONE', #477, #348, #352, .T. ) ;
+#283 = VERTEX_POINT ( 'NONE', #345 ) ;
+#284 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#285 = PLANE ( 'NONE',  #99 ) ;
+#286 = ORIENTED_EDGE ( 'NONE', *, *, #374, .T. ) ;
+#287 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#288 = EDGE_CURVE ( 'NONE', #163, #58, #346, .T. ) ;
+#289 = VERTEX_POINT ( 'NONE', #335 ) ;
+#290 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#291 = EDGE_CURVE ( 'NONE', #405, #479, #342, .T. ) ;
+#292 = SHAPE_DEFINITION_REPRESENTATION ( #268, #158 ) ;
+#293 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
+#294 = ADVANCED_FACE ( 'NONE', ( #343 ), #333, .F. ) ;
+#295 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ;
+#296 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#297 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#298 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#299 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #49 );
+#300 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#301 = ORIENTED_EDGE ( 'NONE', *, *, #209, .T. ) ;
+#302 = ORIENTED_EDGE ( 'NONE', *, *, #226, .F. ) ;
+#303 = ORIENTED_EDGE ( 'NONE', *, *, #209, .F. ) ;
+#304 = EDGE_CURVE ( 'NONE', #447, #167, #356, .T. ) ;
+#305 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#306 = STYLED_ITEM ( 'NONE', ( #307 ), #158 ) ;
+#307 = PRESENTATION_STYLE_ASSIGNMENT (( #51 ) ) ;
+#308 = SURFACE_STYLE_FILL_AREA ( #55 ) ;
+#309 = VERTEX_POINT ( 'NONE', #275 ) ;
+#310 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#311 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#312 = COLOUR_RGB ( '',0.8980392156862745400, 0.9176470588235293700, 0.9294117647058823800 ) ;
+#313 = EDGE_CURVE ( 'NONE', #479, #447, #330, .T. ) ;
+#314 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#315 = VERTEX_POINT ( 'NONE', #267 ) ;
+#316 = ORIENTED_EDGE ( 'NONE', *, *, #226, .T. ) ;
+#317 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
+#318 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #83 );
+#319 = EDGE_CURVE ( 'NONE', #265, #407, #331, .T. ) ;
+#320 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#321 = VECTOR ( 'NONE', #154, 39.37007874015748100 ) ;
+#322 = VECTOR ( 'NONE', #181, 39.37007874015748100 ) ;
+#323 = CYLINDRICAL_SURFACE ( 'NONE', #229, 0.8000000000000000400 ) ;
+#324 = LINE ( 'NONE', #177, #321 ) ;
+#325 = EDGE_CURVE ( 'NONE', #289, #193, #339, .T. ) ;
+#326 = FACE_OUTER_BOUND ( 'NONE', #57, .T. ) ;
+#327 = CIRCLE ( 'NONE', #204, 0.5875000000000001300 ) ;
+#328 = FACE_OUTER_BOUND ( 'NONE', #130, .T. ) ;
+#329 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#330 = CIRCLE ( 'NONE', #121, 0.8999999999999999100 ) ;
+#331 = CIRCLE ( 'NONE', #101, 0.8000000000000000400 ) ;
+#332 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #306 ) ) ;
+#333 = CYLINDRICAL_SURFACE ( 'NONE', #140, 0.5875000000000001300 ) ;
+#334 = LINE ( 'NONE', #152, #322 ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#336 = ORIENTED_EDGE ( 'NONE', *, *, #239, .T. ) ;
+#337 = ADVANCED_FACE ( 'NONE', ( #328 ), #323, .T. ) ;
+#338 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#339 = CIRCLE ( 'NONE', #162, 0.8000000000000000400 ) ;
+#340 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#341 = VECTOR ( 'NONE', #296, 39.37007874015748100 ) ;
+#342 = LINE ( 'NONE', #351, #341 ) ;
+#343 = FACE_OUTER_BOUND ( 'NONE', #281, .T. ) ;
+#344 = VECTOR ( 'NONE', #338, 39.37007874015748100 ) ;
+#345 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#346 = CIRCLE ( 'NONE', #60, 0.8000000000000000400 ) ;
+#347 = VECTOR ( 'NONE', #340, 39.37007874015748100 ) ;
+#348 = VERTEX_POINT ( 'NONE', #183 ) ;
+#349 = ORIENTED_EDGE ( 'NONE', *, *, #248, .T. ) ;
+#350 = EDGE_CURVE ( 'NONE', #123, #309, #327, .T. ) ;
+#351 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#352 = LINE ( 'NONE', #403, #344 ) ;
+#353 = VECTOR ( 'NONE', #391, 39.37007874015748100 ) ;
+#354 = LINE ( 'NONE', #387, #347 ) ;
+#355 = VECTOR ( 'NONE', #269, 39.37007874015748100 ) ;
+#356 = LINE ( 'NONE', #273, #355 ) ;
+#357 = LINE ( 'NONE', #408, #353 ) ;
+#358 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#359 = VECTOR ( 'NONE', #109, 39.37007874015748100 ) ;
+#360 = EDGE_CURVE ( 'NONE', #163, #22, #334, .T. ) ;
+#361 = FACE_OUTER_BOUND ( 'NONE', #476, .T. ) ;
+#362 = CIRCLE ( 'NONE', #11, 0.5875000000000001300 ) ;
+#363 = CIRCLE ( 'NONE', #481, 0.8999999999999999100 ) ;
+#364 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#365 = LINE ( 'NONE', #231, #389 ) ;
+#366 = LINE ( 'NONE', #132, #359 ) ;
+#367 = CIRCLE ( 'NONE', #482, 0.8999999999999999100 ) ;
+#368 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#369 = VECTOR ( 'NONE', #426, 39.37007874015748100 ) ;
+#370 = ORIENTED_EDGE ( 'NONE', *, *, #219, .F. ) ;
+#371 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#372 = LINE ( 'NONE', #368, #369 ) ;
+#373 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#374 = EDGE_CURVE ( 'NONE', #309, #167, #324, .T. ) ;
+#375 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#376 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #306 ), #411 ) ;
+#377 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #67 );
+#378 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#379 = ORIENTED_EDGE ( 'NONE', *, *, #187, .F. ) ;
+#380 = PLANE ( 'NONE',  #41 ) ;
+#381 = PRESENTATION_STYLE_ASSIGNMENT (( #251 ) ) ;
+#382 = COLOUR_RGB ( '',0.8980392156862745400, 0.9176470588235293700, 0.9294117647058823800 ) ;
+#383 = FACE_OUTER_BOUND ( 'NONE', #259, .T. ) ;
+#384 = VECTOR ( 'NONE', #364, 39.37007874015748100 ) ;
+#385 = SURFACE_STYLE_FILL_AREA ( #223 ) ;
+#386 = VECTOR ( 'NONE', #66, 39.37007874015748100 ) ;
+#387 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#388 = LINE ( 'NONE', #222, #384 ) ;
+#389 = VECTOR ( 'NONE', #166, 39.37007874015748100 ) ;
+#390 = VECTOR ( 'NONE', #95, 39.37007874015748100 ) ;
+#391 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#392 = CYLINDRICAL_SURFACE ( 'NONE', #10, 0.8000000000000000400 ) ;
+#393 = CIRCLE ( 'NONE', #15, 0.8999999999999999100 ) ;
+#394 = LINE ( 'NONE', #32, #386 ) ;
+#395 = CIRCLE ( 'NONE', #27, 0.8999999999999999100 ) ;
+#396 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#397 = ORIENTED_EDGE ( 'NONE', *, *, #153, .T. ) ;
+#398 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#399 = FACE_OUTER_BOUND ( 'NONE', #258, .T. ) ;
+#400 = VECTOR ( 'NONE', #185, 39.37007874015748100 ) ;
+#401 = LINE ( 'NONE', #25, #400 ) ;
+#402 = LINE ( 'NONE', #150, #406 ) ;
+#403 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#404 = LINE ( 'NONE', #157, #390 ) ;
+#405 = VERTEX_POINT ( 'NONE', #147 ) ;
+#406 = VECTOR ( 'NONE', #417, 39.37007874015748100 ) ;
+#407 = VERTEX_POINT ( 'NONE', #143 ) ;
+#408 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#409 = ORIENTED_EDGE ( 'NONE', *, *, #271, .F. ) ;
+#410 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#411 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #113 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #46, #24, #26 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#412 = VECTOR ( 'NONE', #198, 39.37007874015748100 ) ;
+#413 = CIRCLE ( 'NONE', #45, 0.8999999999999999100 ) ;
+#414 = LINE ( 'NONE', #16, #442 ) ;
+#415 = FACE_OUTER_BOUND ( 'NONE', #93, .T. ) ;
+#416 = LINE ( 'NONE', #448, #412 ) ;
+#417 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#418 = LINE ( 'NONE', #133, #429 ) ;
+#419 = CIRCLE ( 'NONE', #35, 0.8000000000000000400 ) ;
+#420 = ORIENTED_EDGE ( 'NONE', *, *, #190, .F. ) ;
+#421 = VERTEX_POINT ( 'NONE', #151 ) ;
+#422 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#423 = FILL_AREA_STYLE_COLOUR ( '', #382 ) ;
+#424 = VECTOR ( 'NONE', #260, 39.37007874015748100 ) ;
+#425 = LINE ( 'NONE', #378, #424 ) ;
+#426 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#427 = FACE_OUTER_BOUND ( 'NONE', #70, .T. ) ;
+#428 = VECTOR ( 'NONE', #76, 39.37007874015748100 ) ;
+#429 = VECTOR ( 'NONE', #320, 39.37007874015748100 ) ;
+#430 = ORIENTED_EDGE ( 'NONE', *, *, #144, .F. ) ;
+#431 = VECTOR ( 'NONE', #6, 39.37007874015748100 ) ;
+#432 = ORIENTED_EDGE ( 'NONE', *, *, #160, .F. ) ;
+#433 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ;
+#434 = EDGE_LOOP ( 'NONE', ( #189, #379, #178, #370 ) ) ;
+#435 = FACE_OUTER_BOUND ( 'NONE', #97, .T. ) ;
+#436 = AXIS2_PLACEMENT_3D ( 'NONE', #371, #210, #194 ) ;
+#437 = ORIENTED_EDGE ( 'NONE', *, *, #174, .T. ) ;
+#438 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#439 = LINE ( 'NONE', #36, #428 ) ;
+#440 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#441 = CYLINDRICAL_SURFACE ( 'NONE', #54, 0.8999999999999999100 ) ;
+#442 = VECTOR ( 'NONE', #156, 39.37007874015748100 ) ;
+#443 = VECTOR ( 'NONE', #131, 39.37007874015748100 ) ;
+#444 = FACE_OUTER_BOUND ( 'NONE', #434, .T. ) ;
+#445 = LINE ( 'NONE', #235, #431 ) ;
+#446 = VECTOR ( 'NONE', #228, 39.37007874015748100 ) ;
+#447 = VERTEX_POINT ( 'NONE', #170 ) ;
+#448 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#449 = VECTOR ( 'NONE', #256, 39.37007874015748100 ) ;
+#450 = CYLINDRICAL_SURFACE ( 'NONE', #81, 0.8999999999999999100 ) ;
+#451 = LINE ( 'NONE', #165, #443 ) ;
+#452 = CYLINDRICAL_SURFACE ( 'NONE', #85, 0.8999999999999999100 ) ;
+#453 = FACE_OUTER_BOUND ( 'NONE', #182, .T. ) ;
+#454 = LINE ( 'NONE', #191, #446 ) ;
+#455 = ORIENTED_EDGE ( 'NONE', *, *, #271, .T. ) ;
+#456 = ADVANCED_FACE ( 'NONE', ( #326 ), #142, .T. ) ;
+#457 = FACE_OUTER_BOUND ( 'NONE', #471, .T. ) ;
+#458 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ;
+#459 = FACE_OUTER_BOUND ( 'NONE', #483, .T. ) ;
+#460 = ORIENTED_EDGE ( 'NONE', *, *, #180, .F. ) ;
+#461 = LINE ( 'NONE', #4, #449 ) ;
+#462 = VERTEX_POINT ( 'NONE', #141 ) ;
+#463 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#464 = FACE_OUTER_BOUND ( 'NONE', #13, .T. ) ;
+#465 = ORIENTED_EDGE ( 'NONE', *, *, #325, .T. ) ;
+#466 = ORIENTED_EDGE ( 'NONE', *, *, #196, .T. ) ;
+#467 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#468 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#469 = PLANE ( 'NONE',  #82 ) ;
+#470 = VERTEX_POINT ( 'NONE', #115 ) ;
+#471 = EDGE_LOOP ( 'NONE', ( #107, #56, #409, #155 ) ) ;
+#472 = ORIENTED_EDGE ( 'NONE', *, *, #187, .T. ) ;
+#473 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#474 = ORIENTED_EDGE ( 'NONE', *, *, #213, .T. ) ;
+#475 = VERTEX_POINT ( 'NONE', #111 ) ;
+#476 = EDGE_LOOP ( 'NONE', ( #203, #68, #217, #159 ) ) ;
+#477 = VERTEX_POINT ( 'NONE', #92 ) ;
+#478 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#479 = VERTEX_POINT ( 'NONE', #112 ) ;
+#480 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#481 = AXIS2_PLACEMENT_3D ( 'NONE', #238, #329, #138 ) ;
+#482 = AXIS2_PLACEMENT_3D ( 'NONE', #310, #28, #263 ) ;
+#483 = EDGE_LOOP ( 'NONE', ( #252, #349, #8, #303 ) ) ;
+#484 = ORIENTED_EDGE ( 'NONE', *, *, #213, .F. ) ;
+#485 = ORIENTED_EDGE ( 'NONE', *, *, #374, .F. ) ;
+#486 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ;
+#487 = ORIENTED_EDGE ( 'NONE', *, *, #134, .F. ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_2.step

@@ -0,0 +1,996 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Trellais_Base_2.step',
+    '2016-04-19T10:44:27',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2015',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#2 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#3 = EDGE_CURVE ( 'NONE', #611, #59, #673, .T. ) ;
+#4 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.8903699539794776000, -1.505499999999999600 ) ) ;
+#5 = AXIS2_PLACEMENT_3D ( 'NONE', #161, #716, #220 ) ;
+#6 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #519 ) ;
+#7 = ORIENTED_EDGE ( 'NONE', *, *, #728, .T. ) ;
+#8 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#9 = EDGE_CURVE ( 'NONE', #791, #21, #670, .T. ) ;
+#10 = EDGE_CURVE ( 'NONE', #21, #779, #671, .T. ) ;
+#11 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#12 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#14 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#15 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#16 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#17 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.0000000000000000000, -1.000000000000000200 ) ) ;
+#18 = CARTESIAN_POINT ( 'NONE',  ( 0.1906249999999999900, 0.8356249999999997300, -3.000000000000000400 ) ) ;
+#19 = EDGE_CURVE ( 'NONE', #747, #830, #677, .T. ) ;
+#20 = ORIENTED_EDGE ( 'NONE', *, *, #23, .F. ) ;
+#21 = VERTEX_POINT ( 'NONE', #215 ) ;
+#22 = EDGE_CURVE ( 'NONE', #208, #208, #661, .T. ) ;
+#23 = EDGE_CURVE ( 'NONE', #937, #944, #659, .T. ) ;
+#24 = ORIENTED_EDGE ( 'NONE', *, *, #23, .T. ) ;
+#25 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ;
+#26 = EDGE_CURVE ( 'NONE', #347, #208, #667, .T. ) ;
+#27 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#28 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#29 = VERTEX_POINT ( 'NONE', #245 ) ;
+#30 = EDGE_CURVE ( 'NONE', #756, #59, #654, .T. ) ;
+#31 = CARTESIAN_POINT ( 'NONE',  ( -0.08299456471625589500, 0.9043408528552404600, -1.361910545740200100 ) ) ;
+#32 = ORIENTED_EDGE ( 'NONE', *, *, #775, .F. ) ;
+#33 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#34 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000006700, 0.8903699539794773800, -1.000000000000000200 ) ) ;
+#35 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#36 = ADVANCED_FACE ( 'NONE', ( #653 ), #83, .F. ) ;
+#37 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#38 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#39 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#40 = EDGE_CURVE ( 'NONE', #142, #706, #644, .T. ) ;
+#41 = CARTESIAN_POINT ( 'NONE',  ( -5.463695987328526400E-016, 0.7373699539794775800, -1.505499999999999600 ) ) ;
+#42 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#43 = ADVANCED_FACE ( 'NONE', ( #650 ), #637, .T. ) ;
+#44 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#45 = EDGE_CURVE ( 'NONE', #208, #900, #639, .T. ) ;
+#46 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#47 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#48 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#49 = ORIENTED_EDGE ( 'NONE', *, *, #665, .T. ) ;
+#50 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#51 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#52 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#54 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#55 = AXIS2_PLACEMENT_3D ( 'NONE', #824, #563, #181 ) ;
+#56 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#57 = CARTESIAN_POINT ( 'NONE',  ( 0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ;
+#58 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.8903699539794776000, -3.000000000000000400 ) ) ;
+#59 = VERTEX_POINT ( 'NONE', #734 ) ;
+#60 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#61 = EDGE_CURVE ( 'NONE', #753, #96, #636, .T. ) ;
+#62 = EDGE_CURVE ( 'NONE', #900, #851, #642, .T. ) ;
+#63 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#64 = EDGE_CURVE ( 'NONE', #874, #763, #628, .T. ) ;
+#65 = AXIS2_PLACEMENT_3D ( 'NONE', #210, #104, #618 ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#67 = VERTEX_POINT ( 'NONE', #231 ) ;
+#68 = ORIENTED_EDGE ( 'NONE', *, *, #842, .T. ) ;
+#69 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
+#70 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#71 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#72 = AXIS2_PLACEMENT_3D ( 'NONE', #57, #361, #291 ) ;
+#73 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#74 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#75 = EDGE_CURVE ( 'NONE', #851, #142, #622, .T. ) ;
+#76 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#77 = ORIENTED_EDGE ( 'NONE', *, *, #147, .F. ) ;
+#78 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#79 = ORIENTED_EDGE ( 'NONE', *, *, #597, .T. ) ;
+#80 = EDGE_CURVE ( 'NONE', #829, #386, #623, .T. ) ;
+#81 = EDGE_CURVE ( 'NONE', #347, #156, #615, .T. ) ;
+#82 = ORIENTED_EDGE ( 'NONE', *, *, #61, .T. ) ;
+#83 = PLANE ( 'NONE',  #551 ) ;
+#84 = STYLED_ITEM ( 'NONE', ( #481 ), #476 ) ;
+#85 = ORIENTED_EDGE ( 'NONE', *, *, #593, .T. ) ;
+#86 = CARTESIAN_POINT ( 'NONE',  ( 0.08303899349228448200, 0.9043370025374136700, -1.361927527457784900 ) ) ;
+#87 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#88 = CARTESIAN_POINT ( 'NONE',  ( -0.1092859923199244000, 0.9009199821345862400, -1.380741065600105800 ) ) ;
+#89 = EDGE_CURVE ( 'NONE', #67, #386, #625, .T. ) ;
+#90 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#91 = PLANE ( 'NONE',  #784 ) ;
+#92 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#93 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#94 = ORIENTED_EDGE ( 'NONE', *, *, #934, .T. ) ;
+#95 = EDGE_CURVE ( 'NONE', #763, #944, #608, .T. ) ;
+#96 = VERTEX_POINT ( 'NONE', #815 ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #252, .F. ) ;
+#98 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#99 = ADVANCED_FACE ( 'NONE', ( #612 ), #591, .T. ) ;
+#100 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #276 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #108, #621, #157 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#101 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999900, 0.8356249999999995100, -1.000000000000000200 ) ) ;
+#102 = CARTESIAN_POINT ( 'NONE',  ( -1.690330946079762900E-015, 0.7373699539794775800, -1.497499999999998700 ) ) ;
+#103 = ADVANCED_FACE ( 'NONE', ( #605 ), #589, .F. ) ;
+#104 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#105 = AXIS2_PLACEMENT_3D ( 'NONE', #599, #867, #533 ) ;
+#106 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#107 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#108 =( CONVERSION_BASED_UNIT ( 'INCH', #298 ) LENGTH_UNIT ( ) NAMED_UNIT ( #51 ) );
+#109 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#110 = ORIENTED_EDGE ( 'NONE', *, *, #61, .F. ) ;
+#111 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#112 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#113 = EDGE_CURVE ( 'NONE', #660, #67, #590, .T. ) ;
+#114 = AXIS2_PLACEMENT_3D ( 'NONE', #112, #278, #894 ) ;
+#115 = VERTEX_POINT ( 'NONE', #289 ) ;
+#116 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#117 = ORIENTED_EDGE ( 'NONE', *, *, #64, .F. ) ;
+#118 = EDGE_CURVE ( 'NONE', #386, #803, #601, .T. ) ;
+#119 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#120 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#121 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#122 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#123 = ORIENTED_EDGE ( 'NONE', *, *, #842, .F. ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.8903699539794777100, -1.494531455293122400 ) ) ;
+#125 = AXIS2_PLACEMENT_3D ( 'NONE', #912, #559, #12 ) ;
+#126 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#127 = EDGE_CURVE ( 'NONE', #757, #195, #588, .T. ) ;
+#128 = ORIENTED_EDGE ( 'NONE', *, *, #869, .F. ) ;
+#129 = ORIENTED_EDGE ( 'NONE', *, *, #292, .T. ) ;
+#130 = ORIENTED_EDGE ( 'NONE', *, *, #597, .F. ) ;
+#131 = EDGE_CURVE ( 'NONE', #803, #660, #604, .T. ) ;
+#132 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #213, #349 ) ;
+#133 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#134 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999900, 0.8356249999999995100, -1.000000000000000200 ) ) ;
+#135 = AXIS2_PLACEMENT_3D ( 'NONE', #893, #886, #810 ) ;
+#136 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#137 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #528, 'distance_accuracy_value', 'NONE');
+#138 = CARTESIAN_POINT ( 'NONE',  ( 0.05356634221386298600, 0.9070503678270005500, -1.348538400958563700 ) ) ;
+#139 = EDGE_CURVE ( 'NONE', #691, #756, #583, .T. ) ;
+#140 = CARTESIAN_POINT ( 'NONE',  ( -0.1314786984691889100, 0.8972860744427430000, -1.404408607860570000 ) ) ;
+#141 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#142 = VERTEX_POINT ( 'NONE', #715 ) ;
+#143 = CARTESIAN_POINT ( 'NONE',  ( -1.690330946079762900E-015, 0.5453699539794775200, -1.497499999999998700 ) ) ;
+#144 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#145 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#146 = ADVANCED_FACE ( 'NONE', ( #578 ), #627, .T. ) ;
+#147 = EDGE_CURVE ( 'NONE', #706, #156, #577, .T. ) ;
+#148 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#149 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#150 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999900, 0.8356249999999995100, -3.000000000000000400 ) ) ;
+#151 = ADVANCED_FACE ( 'NONE', ( #571 ), #568, .T. ) ;
+#152 = ORIENTED_EDGE ( 'NONE', *, *, #947, .F. ) ;
+#153 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
+#154 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#155 = CARTESIAN_POINT ( 'NONE',  ( 0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ;
+#156 = VERTEX_POINT ( 'NONE', #4 ) ;
+#157 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#158 = DIRECTION ( 'NONE',  ( 2.208330889770546000E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#159 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.0000000000000000000, -3.000000000000000400 ) ) ;
+#160 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #84 ) ) ;
+#161 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#162 = DIRECTION ( 'NONE',  ( -1.370950816492604200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #64, .T. ) ;
+#164 = ORIENTED_EDGE ( 'NONE', *, *, #728, .F. ) ;
+#165 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#166 = EDGE_CURVE ( 'NONE', #939, #829, #570, .T. ) ;
+#167 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#168 = CARTESIAN_POINT ( 'NONE',  ( 0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
+#169 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#170 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#171 = EDGE_CURVE ( 'NONE', #29, #852, #581, .T. ) ;
+#172 = STYLED_ITEM ( 'NONE', ( #280 ), #191 ) ;
+#173 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#174 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#175 = VERTEX_POINT ( 'NONE', #808 ) ;
+#176 = PLANE ( 'NONE',  #125 ) ;
+#177 = AXIS2_PLACEMENT_3D ( 'NONE', #219, #87, #202 ) ;
+#178 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#179 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#180 = CARTESIAN_POINT ( 'NONE',  ( 0.1644204344883926900, 0.8906171820826315200, -1.483753186687025900 ) ) ;
+#181 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#182 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#183 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#184 = VERTEX_POINT ( 'NONE', #724 ) ;
+#185 = SURFACE_STYLE_USAGE ( .BOTH. , #228 ) ;
+#186 = EDGE_CURVE ( 'NONE', #142, #347, #562, .T. ) ;
+#187 = AXIS2_PLACEMENT_3D ( 'NONE', #804, #634, #162 ) ;
+#188 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #196, #190 ) ;
+#189 = ORIENTED_EDGE ( 'NONE', *, *, #840, .T. ) ;
+#190 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#191 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Base_2', ( #476, #462 ), #100 ) ;
+#192 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#193 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #84 ), #239 ) ;
+#194 = CARTESIAN_POINT ( 'NONE',  ( 0.02172755346967101100, 0.9086645110077499200, -1.341070851559779800 ) ) ;
+#195 = VERTEX_POINT ( 'NONE', #696 ) ;
+#196 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#197 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#198 = CARTESIAN_POINT ( 'NONE',  ( -0.1486664976559613200, 0.8939971990083345200, -1.431977152334762900 ) ) ;
+#199 = EDGE_CURVE ( 'NONE', #175, #96, #564, .T. ) ;
+#200 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ;
+#201 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#202 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#203 = ADVANCED_FACE ( 'NONE', ( #565 ), #549, .T. ) ;
+#204 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#205 = EDGE_CURVE ( 'NONE', #791, #184, #550, .T. ) ;
+#206 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #172 ) ) ;
+#207 = ORIENTED_EDGE ( 'NONE', *, *, #760, .F. ) ;
+#208 = VERTEX_POINT ( 'NONE', #424 ) ;
+#209 = ADVANCED_FACE ( 'NONE', ( #555 ), #539, .T. ) ;
+#210 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
+#212 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999998200, -5.244785863205042700E-017, -1.000000000000000200 ) ) ;
+#213 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#214 = AXIS2_PLACEMENT_3D ( 'NONE', #259, #222, #165 ) ;
+#215 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#216 = PLANE ( 'NONE',  #928 ) ;
+#217 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #272 ) ;
+#218 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#219 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ;
+#220 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#221 = ORIENTED_EDGE ( 'NONE', *, *, #541, .T. ) ;
+#222 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#223 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
+#224 = EDGE_CURVE ( 'NONE', #952, #756, #545, .T. ) ;
+#225 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#226 = AXIS2_PLACEMENT_3D ( 'NONE', #635, #167, #726 ) ;
+#227 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#228 = SURFACE_SIDE_STYLE ('',( #473 ) ) ;
+#229 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000009500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
+#230 = AXIS2_PLACEMENT_3D ( 'NONE', #148, #145, #141 ) ;
+#231 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#232 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#233 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#234 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#235 = CARTESIAN_POINT ( 'NONE',  ( -0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ;
+#236 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
+#237 = CARTESIAN_POINT ( 'NONE',  ( 0.1569997460273125400, 0.8922583492056802600, -1.452031913512531700 ) ) ;
+#238 = ORIENTED_EDGE ( 'NONE', *, *, #205, .T. ) ;
+#239 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #406 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #729, #387, #1 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#240 = EDGE_CURVE ( 'NONE', #29, #96, #548, .T. ) ;
+#241 = EDGE_LOOP ( 'NONE', ( #683, #872, #882, #938 ) ) ;
+#242 = ORIENTED_EDGE ( 'NONE', *, *, #312, .F. ) ;
+#243 = ORIENTED_EDGE ( 'NONE', *, *, #484, .F. ) ;
+#244 = EDGE_CURVE ( 'NONE', #29, #841, #579, .T. ) ;
+#245 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#246 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #172 ), #293 ) ;
+#247 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#248 = AXIS2_PLACEMENT_3D ( 'NONE', #452, #456, #717 ) ;
+#249 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#250 = ORIENTED_EDGE ( 'NONE', *, *, #224, .T. ) ;
+#251 = CARTESIAN_POINT ( 'NONE',  ( -0.01068973362340016800, 0.9089055585831014000, -1.339990935699883800 ) ) ;
+#252 = EDGE_CURVE ( 'NONE', #747, #936, #537, .T. ) ;
+#253 = CARTESIAN_POINT ( 'NONE',  ( -0.1601231443816663600, 0.8915719896986321600, -1.462272985395308700 ) ) ;
+#254 = AXIS2_PLACEMENT_3D ( 'NONE', #223, #2, #897 ) ;
+#255 = ORIENTED_EDGE ( 'NONE', *, *, #292, .F. ) ;
+#256 = ADVANCED_FACE ( 'NONE', ( #532, #529 ), #520, .T. ) ;
+#257 = ORIENTED_EDGE ( 'NONE', *, *, #22, .T. ) ;
+#258 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
+#259 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
+#260 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#261 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#262 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #98, #92 ) ;
+#263 = ADVANCED_FACE ( 'NONE', ( #524 ), #664, .T. ) ;
+#264 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#265 = PLANE ( 'NONE',  #65 ) ;
+#266 = CARTESIAN_POINT ( 'NONE',  ( -0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
+#267 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#268 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #54 );
+#269 = DIRECTION ( 'NONE',  ( 2.208330889770546000E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#270 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.208330889770546000E-016, 0.0000000000000000000 ) ) ;
+#271 = ORIENTED_EDGE ( 'NONE', *, *, #371, .T. ) ;
+#272 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#273 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#274 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#275 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#276 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #108, 'distance_accuracy_value', 'NONE');
+#277 = AXIS2_PLACEMENT_3D ( 'NONE', #204, #783, #260 ) ;
+#278 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#279 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#280 = PRESENTATION_STYLE_ASSIGNMENT (( #451 ) ) ;
+#281 = PLANE ( 'NONE',  #254 ) ;
+#282 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#283 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#284 = EDGE_CURVE ( 'NONE', #839, #175, #522, .T. ) ;
+#285 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #274, 'design' ) ;
+#286 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#287 = ORIENTED_EDGE ( 'NONE', *, *, #224, .F. ) ;
+#288 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#289 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007000, 0.8903699539794772700, -1.505499999999999600 ) ) ;
+#290 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#291 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#292 = EDGE_CURVE ( 'NONE', #573, #184, #521, .T. ) ;
+#293 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #137 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #528, #111, #626 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#294 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#295 = CARTESIAN_POINT ( 'NONE',  ( 0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
+#296 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -1.505499999999999600 ) ) ;
+#297 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#298 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #969 );
+#299 = ORIENTED_EDGE ( 'NONE', *, *, #371, .F. ) ;
+#300 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#301 = AXIS2_PLACEMENT_3D ( 'NONE', #39, #28, #27 ) ;
+#302 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#303 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#304 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#305 = CARTESIAN_POINT ( 'NONE',  ( 0.1436005536913934900, 0.8950191934951699000, -1.422519181586778800 ) ) ;
+#306 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#307 = FILL_AREA_STYLE ('',( #469 ) ) ;
+#308 = CYLINDRICAL_SURFACE ( 'NONE', #132, 0.5875000000000001300 ) ;
+#309 = SHAPE_DEFINITION_REPRESENTATION ( #6, #191 ) ;
+#310 = FACE_OUTER_BOUND ( 'NONE', #949, .T. ) ;
+#311 = ORIENTED_EDGE ( 'NONE', *, *, #341, .T. ) ;
+#312 = EDGE_CURVE ( 'NONE', #747, #757, #518, .T. ) ;
+#313 = AXIS2_PLACEMENT_3D ( 'NONE', #116, #641, #170 ) ;
+#314 = SURFACE_STYLE_FILL_AREA ( #357 ) ;
+#315 = LINE ( 'NONE', #798, #321 ) ;
+#316 = AXIS2_PLACEMENT_3D ( 'NONE', #41, #35, #33 ) ;
+#317 = CIRCLE ( 'NONE', #845, 0.8999999999999999100 ) ;
+#318 = FACE_OUTER_BOUND ( 'NONE', #680, .T. ) ;
+#319 = CARTESIAN_POINT ( 'NONE',  ( 0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ;
+#320 = VERTEX_POINT ( 'NONE', #525 ) ;
+#321 = VECTOR ( 'NONE', #269, 39.37007874015748100 ) ;
+#322 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#323 = VECTOR ( 'NONE', #44, 39.37007874015748100 ) ;
+#324 = VECTOR ( 'NONE', #261, 39.37007874015748100 ) ;
+#325 = LINE ( 'NONE', #511, #324 ) ;
+#326 = LINE ( 'NONE', #873, #328 ) ;
+#327 = AXIS2_PLACEMENT_3D ( 'NONE', #789, #264, #875 ) ;
+#328 = VECTOR ( 'NONE', #343, 39.37007874015748100 ) ;
+#329 = VECTOR ( 'NONE', #866, 39.37007874015748100 ) ;
+#330 = CARTESIAN_POINT ( 'NONE',  ( -0.04294414358913817300, 0.9077458242970448700, -1.345301919354580100 ) ) ;
+#331 = FACE_OUTER_BOUND ( 'NONE', #762, .T. ) ;
+#332 = ORIENTED_EDGE ( 'NONE', *, *, #312, .T. ) ;
+#333 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007600, 0.8903699539794776000, -1.494531313619976700 ) ) ;
+#334 = EDGE_CURVE ( 'NONE', #936, #863, #513, .T. ) ;
+#335 = ADVANCED_FACE ( 'NONE', ( #514 ), #497, .F. ) ;
+#336 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#337 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#338 = LINE ( 'NONE', #606, #329 ) ;
+#339 = LINE ( 'NONE', #959, #323 ) ;
+#340 = ADVANCED_FACE ( 'NONE', ( #503 ), #494, .F. ) ;
+#341 = EDGE_CURVE ( 'NONE', #573, #691, #502, .T. ) ;
+#342 = VECTOR ( 'NONE', #393, 39.37007874015748100 ) ;
+#343 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#344 = LINE ( 'NONE', #746, #342 ) ;
+#345 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#346 = LINE ( 'NONE', #34, #350 ) ;
+#347 = VERTEX_POINT ( 'NONE', #917 ) ;
+#348 = CIRCLE ( 'NONE', #431, 0.5875000000000001300 ) ;
+#349 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#350 = VECTOR ( 'NONE', #598, 39.37007874015748100 ) ;
+#351 = ADVANCED_FACE ( 'NONE', ( #499 ), #490, .F. ) ;
+#352 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#353 = ORIENTED_EDGE ( 'NONE', *, *, #186, .T. ) ;
+#354 = AXIS2_PLACEMENT_3D ( 'NONE', #275, #364, #337 ) ;
+#355 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#356 = VECTOR ( 'NONE', #825, 39.37007874015748100 ) ;
+#357 = FILL_AREA_STYLE ('',( #885 ) ) ;
+#358 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #561, #124, #180, #749, #237, #834, #305, #923, #400, #458, #495, #86, #592, #138, #686, #194, #773, #251, #860, #330, #945, #425, #31, #501, #88, #596, #140, #689, #198, #778, #253, #862, #333, #951 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.0000000000000000000, 0.0008237336438414783900, 0.001647467287682956800, 0.002471200931524435100, 0.003294934575365913600, 0.004118668219207391600, 0.004942401863048870100, 0.005766135506890348600, 0.006589869150731827100, 0.007413602794573305600, 0.008237336438414783300, 0.009061070082256261800, 0.009884803726097740300, 0.01070853736993921900, 0.01153227101378069700, 0.01235600465762217600, 0.01317973830146365400 ),
+ .UNSPECIFIED. ) ;
+#359 = VECTOR ( 'NONE', #297, 39.37007874015748100 ) ;
+#360 = CYLINDRICAL_SURFACE ( 'NONE', #542, 0.8000000000000000400 ) ;
+#361 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#362 = LINE ( 'NONE', #378, #359 ) ;
+#363 = LINE ( 'NONE', #233, #356 ) ;
+#364 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#365 = FACE_OUTER_BOUND ( 'NONE', #766, .T. ) ;
+#366 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ;
+#367 = FACE_OUTER_BOUND ( 'NONE', #770, .T. ) ;
+#368 = ORIENTED_EDGE ( 'NONE', *, *, #139, .T. ) ;
+#369 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.8903699539794776000, -1.000000000000000200 ) ) ;
+#370 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999600, 0.6809919235938120000, -1.000000000000000200 ) ) ;
+#371 = EDGE_CURVE ( 'NONE', #573, #952, #496, .T. ) ;
+#372 = AXIS2_PLACEMENT_3D ( 'NONE', #735, #232, #821 ) ;
+#373 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000009500, 0.8903699539794776000, -3.000000000000000400 ) ) ;
+#374 = VECTOR ( 'NONE', #909, 39.37007874015748100 ) ;
+#375 = FACE_OUTER_BOUND ( 'NONE', #765, .T. ) ;
+#376 = LINE ( 'NONE', #8, #374 ) ;
+#377 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#378 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#379 = VECTOR ( 'NONE', #290, 39.37007874015748100 ) ;
+#380 = CIRCLE ( 'NONE', #313, 0.7482017767938234900 ) ;
+#381 = AXIS2_PLACEMENT_3D ( 'NONE', #18, #192, #90 ) ;
+#382 = VECTOR ( 'NONE', #227, 39.37007874015748100 ) ;
+#383 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#385 = LINE ( 'NONE', #720, #382 ) ;
+#384 = CARTESIAN_POINT ( 'NONE',  ( -0.3419776119402986300, 0.4777107523717784600, -3.000000000000000400 ) ) ;
+#386 = VERTEX_POINT ( 'NONE', #474 ) ;
+#387 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#388 = ORIENTED_EDGE ( 'NONE', *, *, #30, .F. ) ;
+#389 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#390 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#391 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#392 = CIRCLE ( 'NONE', #372, 0.2500000000000001100 ) ;
+#393 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#394 = LINE ( 'NONE', #229, #379 ) ;
+#395 = CIRCLE ( 'NONE', #226, 0.2500000000000001100 ) ;
+#396 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#397 = FACE_OUTER_BOUND ( 'NONE', #777, .T. ) ;
+#398 = LINE ( 'NONE', #366, #403 ) ;
+#399 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#400 = CARTESIAN_POINT ( 'NONE',  ( 0.1246321506638823400, 0.8984903836471271900, -1.396079798429413300 ) ) ;
+#401 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#402 = FACE_OUTER_BOUND ( 'NONE', #879, .T. ) ;
+#403 = VECTOR ( 'NONE', #889, 39.37007874015748100 ) ;
+#404 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#405 = ORIENTED_EDGE ( 'NONE', *, *, #139, .F. ) ;
+#406 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #729, 'distance_accuracy_value', 'NONE');
+#407 = EDGE_CURVE ( 'NONE', #852, #175, #491, .T. ) ;
+#408 = FACE_OUTER_BOUND ( 'NONE', #241, .T. ) ;
+#409 = CIRCLE ( 'NONE', #5, 0.7482017767938234900 ) ;
+#410 = VECTOR ( 'NONE', #158, 39.37007874015748100 ) ;
+#411 = LINE ( 'NONE', #449, #410 ) ;
+#412 = LINE ( 'NONE', #109, #418 ) ;
+#413 = FACE_OUTER_BOUND ( 'NONE', #871, .T. ) ;
+#414 = EDGE_CURVE ( 'NONE', #691, #611, #489, .T. ) ;
+#415 = CYLINDRICAL_SURFACE ( 'NONE', #861, 0.8000000000000000400 ) ;
+#416 = CLOSED_SHELL ( 'NONE', ( #440, #955, #870, #256, #796, #876, #701, #785, #693, #263, #600, #516, #436, #705, #203, #103, #613, #151, #335, #43, #146, #340, #209, #510, #351, #99, #36, #960 ) ) ;
+#417 = CIRCLE ( 'NONE', #755, 0.1574999999999998900 ) ;
+#418 = VECTOR ( 'NONE', #712, 39.37007874015748100 ) ;
+#419 = VECTOR ( 'NONE', #355, 39.37007874015748100 ) ;
+#420 = FACE_OUTER_BOUND ( 'NONE', #854, .T. ) ;
+#421 = VECTOR ( 'NONE', #617, 39.37007874015748100 ) ;
+#422 = LINE ( 'NONE', #962, #421 ) ;
+#423 = CIRCLE ( 'NONE', #633, 0.04687500000000001400 ) ;
+#424 = CARTESIAN_POINT ( 'NONE',  ( -2.421206997196959000E-014, 0.7373699539794775800, -1.339999999999999400 ) ) ;
+#425 = CARTESIAN_POINT ( 'NONE',  ( -0.07335619563912319800, 0.9053669957282992600, -1.356747874808138700 ) ) ;
+#426 = LINE ( 'NONE', #970, #419 ) ;
+#427 = EDGE_CURVE ( 'NONE', #67, #939, #488, .T. ) ;
+#428 = CYLINDRICAL_SURFACE ( 'NONE', #455, 0.8999999999999999100 ) ;
+#429 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#430 = CIRCLE ( 'NONE', #687, 0.5875000000000001300 ) ;
+#431 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #828, #303 ) ;
+#432 = CIRCLE ( 'NONE', #327, 0.7482017767938234900 ) ;
+#433 = CIRCLE ( 'NONE', #569, 0.2500000000000002200 ) ;
+#434 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#435 = FACE_OUTER_BOUND ( 'NONE', #932, .T. ) ;
+#436 = ADVANCED_FACE ( 'NONE', ( #482 ), #730, .T. ) ;
+#437 = VECTOR ( 'NONE', #37, 39.37007874015748100 ) ;
+#438 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#439 = CARTESIAN_POINT ( 'NONE',  ( 0.4875000000000000400, 0.6809919235938120000, -3.000000000000000400 ) ) ;
+#440 = ADVANCED_FACE ( 'NONE', ( #483 ), #176, .F. ) ;
+#441 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#442 = CARTESIAN_POINT ( 'NONE',  ( 0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ;
+#443 = FACE_OUTER_BOUND ( 'NONE', #774, .T. ) ;
+#444 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#445 = VECTOR ( 'NONE', #336, 39.37007874015748100 ) ;
+#446 = LINE ( 'NONE', #655, #445 ) ;
+#447 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#448 = LINE ( 'NONE', #953, #437 ) ;
+#449 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999998200, -5.244785863205042700E-017, -1.000000000000000200 ) ) ;
+#450 = CIRCLE ( 'NONE', #277, 0.8000000000000000400 ) ;
+#451 = SURFACE_STYLE_USAGE ( .BOTH. , #972 ) ;
+#452 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#453 = CARTESIAN_POINT ( 'NONE',  ( -1.690330946079762900E-015, 0.5453699539794775200, -1.497499999999998700 ) ) ;
+#454 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#455 = AXIS2_PLACEMENT_3D ( 'NONE', #602, #429, #699 ) ;
+#456 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#457 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999600, 0.6809919235938120000, -3.000000000000000400 ) ) ;
+#458 = CARTESIAN_POINT ( 'NONE',  ( 0.1094200760253842400, 0.9008993506511299200, -1.380867739114418200 ) ) ;
+#459 = EDGE_CURVE ( 'NONE', #839, #863, #480, .T. ) ;
+#460 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ;
+#461 = CARTESIAN_POINT ( 'NONE',  ( 0.3419776119402984600, 0.4777107523717784600, -3.000000000000000400 ) ) ;
+#462 = AXIS2_PLACEMENT_3D ( 'NONE', #447, #714, #218 ) ;
+#463 = CARTESIAN_POINT ( 'NONE',  ( -0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
+#464 = CARTESIAN_POINT ( 'NONE',  ( -5.463695987328526400E-016, 0.7373699539794775800, -1.505499999999999600 ) ) ;
+#465 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #197 );
+#466 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#467 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#468 = CARTESIAN_POINT ( 'NONE',  ( -1.690330946079762900E-015, 0.5453699539794775200, -1.497499999999998700 ) ) ;
+#469 = FILL_AREA_STYLE_COLOUR ( '', #486 ) ;
+#470 = AXIS2_PLACEMENT_3D ( 'NONE', #468, #306, #126 ) ;
+#471 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#473 = SURFACE_STYLE_FILL_AREA ( #307 ) ;
+#472 = CARTESIAN_POINT ( 'NONE',  ( -0.3419776119402986300, 0.4777107523717784600, -1.000000000000000200 ) ) ;
+#474 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#475 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#476 = MANIFOLD_SOLID_BREP ( 'Stock-Treillage_Base-1', #416 ) ;
+#477 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#478 = EDGE_CURVE ( 'NONE', #927, #841, #446, .T. ) ;
+#479 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#480 = LINE ( 'NONE', #122, #493 ) ;
+#481 = PRESENTATION_STYLE_ASSIGNMENT (( #185 ) ) ;
+#482 = FACE_OUTER_BOUND ( 'NONE', #681, .T. ) ;
+#483 = FACE_OUTER_BOUND ( 'NONE', #891, .T. ) ;
+#484 = EDGE_CURVE ( 'NONE', #184, #779, #448, .T. ) ;
+#485 = VECTOR ( 'NONE', #396, 39.37007874015748100 ) ;
+#486 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#487 = AXIS2_PLACEMENT_3D ( 'NONE', #740, #651, #648 ) ;
+#488 = LINE ( 'NONE', #925, #485 ) ;
+#489 = CIRCLE ( 'NONE', #657, 0.04687499999999999300 ) ;
+#490 = CYLINDRICAL_SURFACE ( 'NONE', #887, 0.7482017767938234900 ) ;
+#491 = CIRCLE ( 'NONE', #711, 0.8000000000000000400 ) ;
+#492 = VECTOR ( 'NONE', #133, 39.37007874015748100 ) ;
+#493 = VECTOR ( 'NONE', #300, 39.37007874015748100 ) ;
+#494 = CYLINDRICAL_SURFACE ( 'NONE', #831, 0.04687500000000001400 ) ;
+#495 = CARTESIAN_POINT ( 'NONE',  ( 0.1011131468003748600, 0.9020957037658874400, -1.374028859226739100 ) ) ;
+#496 = LINE ( 'NONE', #743, #492 ) ;
+#497 = CYLINDRICAL_SURFACE ( 'NONE', #768, 0.5875000000000001300 ) ;
+#498 = AXIS2_PLACEMENT_3D ( 'NONE', #93, #42, #512 ) ;
+#499 = FACE_OUTER_BOUND ( 'NONE', #935, .T. ) ;
+#500 = VECTOR ( 'NONE', #479, 39.37007874015748100 ) ;
+#501 = CARTESIAN_POINT ( 'NONE',  ( -0.1008883795968710400, 0.9021252105212961300, -1.373865794683199400 ) ) ;
+#502 = LINE ( 'NONE', #17, #500 ) ;
+#503 = FACE_OUTER_BOUND ( 'NONE', #929, .T. ) ;
+#504 = VECTOR ( 'NONE', #78, 39.37007874015748100 ) ;
+#505 = ORIENTED_EDGE ( 'NONE', *, *, #3, .T. ) ;
+#506 = CARTESIAN_POINT ( 'NONE',  ( -0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ;
+#507 = ORIENTED_EDGE ( 'NONE', *, *, #685, .T. ) ;
+#508 = EDGE_CURVE ( 'NONE', #822, #839, #450, .T. ) ;
+#509 = ORIENTED_EDGE ( 'NONE', *, *, #3, .F. ) ;
+#510 = ADVANCED_FACE ( 'NONE', ( #435 ), #428, .T. ) ;
+#511 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#512 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#513 = CIRCLE ( 'NONE', #585, 0.8999999999999999100 ) ;
+#514 = FACE_OUTER_BOUND ( 'NONE', #832, .T. ) ;
+#515 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#516 = ADVANCED_FACE ( 'NONE', ( #443 ), #958, .F. ) ;
+#517 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#518 = LINE ( 'NONE', #183, #504 ) ;
+#519 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #582, #285 ) ;
+#520 = CYLINDRICAL_SURFACE ( 'NONE', #470, 0.1574999999999998900 ) ;
+#521 = CIRCLE ( 'NONE', #72, 0.2500000000000002200 ) ;
+#522 = LINE ( 'NONE', #401, #538 ) ;
+#523 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#524 = FACE_OUTER_BOUND ( 'NONE', #843, .T. ) ;
+#525 = CARTESIAN_POINT ( 'NONE',  ( -1.690330946079762900E-015, 0.5453699539794775200, -1.654999999999998700 ) ) ;
+#526 = AXIS2_PLACEMENT_3D ( 'NONE', #924, #566, #477 ) ;
+#527 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
+#528 =( CONVERSION_BASED_UNIT ( 'INCH', #268 ) LENGTH_UNIT ( ) NAMED_UNIT ( #880 ) );
+#529 = FACE_OUTER_BOUND ( 'NONE', #725, .T. ) ;
+#530 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#531 = VECTOR ( 'NONE', #666, 39.37007874015748100 ) ;
+#532 = FACE_OUTER_BOUND ( 'NONE', #700, .T. ) ;
+#533 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#534 = EDGE_CURVE ( 'NONE', #611, #874, #432, .T. ) ;
+#535 = VECTOR ( 'NONE', #60, 39.37007874015748100 ) ;
+#536 = PLANE ( 'NONE',  #187 ) ;
+#537 = LINE ( 'NONE', #144, #531 ) ;
+#538 = VECTOR ( 'NONE', #574, 39.37007874015748100 ) ;
+#539 = CYLINDRICAL_SURFACE ( 'NONE', #354, 0.8999999999999999100 ) ;
+#540 = ORIENTED_EDGE ( 'NONE', *, *, #113, .F. ) ;
+#541 = EDGE_CURVE ( 'NONE', #952, #779, #433, .T. ) ;
+#542 = AXIS2_PLACEMENT_3D ( 'NONE', #173, #544, #547 ) ;
+#543 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ;
+#544 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#545 = LINE ( 'NONE', #159, #552 ) ;
+#546 = CARTESIAN_POINT ( 'NONE',  ( -0.1906249999999999900, 0.8356249999999997300, -3.000000000000000400 ) ) ;
+#547 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#548 = CIRCLE ( 'NONE', #301, 0.8999999999999999100 ) ;
+#549 = CYLINDRICAL_SURFACE ( 'NONE', #248, 0.8999999999999999100 ) ;
+#550 = CIRCLE ( 'NONE', #214, 0.5875000000000001300 ) ;
+#551 = AXIS2_PLACEMENT_3D ( 'NONE', #25, #966, #619 ) ;
+#552 = VECTOR ( 'NONE', #273, 39.37007874015748100 ) ;
+#553 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#554 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#555 = FACE_OUTER_BOUND ( 'NONE', #918, .T. ) ;
+#556 = VECTOR ( 'NONE', #895, 39.37007874015748100 ) ;
+#557 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#558 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000009500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
+#559 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#560 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#561 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.8903699539794776000, -1.505499999999999600 ) ) ;
+#562 = LINE ( 'NONE', #782, #556 ) ;
+#563 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#564 = LINE ( 'NONE', #607, #576 ) ;
+#565 = FACE_OUTER_BOUND ( 'NONE', #807, .T. ) ;
+#566 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#567 = VECTOR ( 'NONE', #942, 39.37007874015748100 ) ;
+#568 = CYLINDRICAL_SURFACE ( 'NONE', #177, 0.2500000000000000600 ) ;
+#569 = AXIS2_PLACEMENT_3D ( 'NONE', #439, #47, #517 ) ;
+#570 = CIRCLE ( 'NONE', #135, 0.8000000000000000400 ) ;
+#571 = FACE_OUTER_BOUND ( 'NONE', #788, .T. ) ;
+#572 = ORIENTED_EDGE ( 'NONE', *, *, #252, .T. ) ;
+#573 = VERTEX_POINT ( 'NONE', #609 ) ;
+#574 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#575 = EDGE_CURVE ( 'NONE', #863, #830, #422, .T. ) ;
+#576 = VECTOR ( 'NONE', #454, 39.37007874015748100 ) ;
+#577 = LINE ( 'NONE', #369, #587 ) ;
+#578 = FACE_OUTER_BOUND ( 'NONE', #898, .T. ) ;
+#579 = LINE ( 'NONE', #225, #535 ) ;
+#580 = VECTOR ( 'NONE', #174, 39.37007874015748100 ) ;
+#581 = LINE ( 'NONE', #279, #567 ) ;
+#582 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #674, .NOT_KNOWN. ) ;
+#583 = LINE ( 'NONE', #69, #580 ) ;
+#584 = ORIENTED_EDGE ( 'NONE', *, *, #19, .F. ) ;
+#585 = AXIS2_PLACEMENT_3D ( 'NONE', #713, #48, #46 ) ;
+#586 = VECTOR ( 'NONE', #169, 39.37007874015748100 ) ;
+#587 = VECTOR ( 'NONE', #283, 39.37007874015748100 ) ;
+#588 = CIRCLE ( 'NONE', #794, 0.8000000000000000400 ) ;
+#589 = CYLINDRICAL_SURFACE ( 'NONE', #965, 0.04687499999999999300 ) ;
+#590 = LINE ( 'NONE', #377, #594 ) ;
+#591 = CYLINDRICAL_SURFACE ( 'NONE', #913, 0.1655000000000001700 ) ;
+#592 = CARTESIAN_POINT ( 'NONE',  ( 0.07346159783481195900, 0.9053553647116803200, -1.356806724310162900 ) ) ;
+#593 = EDGE_CURVE ( 'NONE', #874, #937, #423, .T. ) ;
+#594 = VECTOR ( 'NONE', #383, 39.37007874015748100 ) ;
+#595 = ORIENTED_EDGE ( 'NONE', *, *, #334, .T. ) ;
+#596 = CARTESIAN_POINT ( 'NONE',  ( -0.1246537087686272600, 0.8984875672001423300, -1.396094000529339900 ) ) ;
+#597 = EDGE_CURVE ( 'NONE', #790, #848, #430, .T. ) ;
+#598 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#599 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.0000000000000000000, -1.000000000000000200 ) ) ;
+#600 = ADVANCED_FACE ( 'NONE', ( #420 ), #415, .T. ) ;
+#601 = LINE ( 'NONE', #304, #586 ) ;
+#602 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#603 = AXIS2_PLACEMENT_3D ( 'NONE', #464, #554, #119 ) ;
+#604 = CIRCLE ( 'NONE', #850, 0.8999999999999999100 ) ;
+#605 = FACE_OUTER_BOUND ( 'NONE', #890, .T. ) ;
+#606 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#607 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#608 = CIRCLE ( 'NONE', #738, 0.04687500000000001400 ) ;
+#609 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.6809919235938120000, -1.000000000000000200 ) ) ;
+#610 = VECTOR ( 'NONE', #14, 39.37007874015748100 ) ;
+#611 = VERTEX_POINT ( 'NONE', #155 ) ;
+#612 = FACE_OUTER_BOUND ( 'NONE', #884, .T. ) ;
+#613 = ADVANCED_FACE ( 'NONE', ( #413 ), #216, .T. ) ;
+#614 = ORIENTED_EDGE ( 'NONE', *, *, #685, .F. ) ;
+#615 = LINE ( 'NONE', #296, #610 ) ;
+#616 = AXIS2_PLACEMENT_3D ( 'NONE', #745, #732, #663 ) ;
+#617 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#618 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#619 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#620 = VECTOR ( 'NONE', #121, 39.37007874015748100 ) ;
+#621 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#622 = LINE ( 'NONE', #558, #620 ) ;
+#623 = LINE ( 'NONE', #178, #643 ) ;
+#624 = VECTOR ( 'NONE', #302, 39.37007874015748100 ) ;
+#625 = CIRCLE ( 'NONE', #487, 0.8999999999999999100 ) ;
+#626 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#627 = PLANE ( 'NONE',  #105 ) ;
+#628 = LINE ( 'NONE', #235, #624 ) ;
+#629 = PLANE ( 'NONE',  #114 ) ;
+#630 = VECTOR ( 'NONE', #553, 39.37007874015748100 ) ;
+#631 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ;
+#632 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#633 = AXIS2_PLACEMENT_3D ( 'NONE', #266, #877, #352 ) ;
+#634 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.370950816492604200E-016 ) ) ;
+#635 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ;
+#636 = LINE ( 'NONE', #827, #630 ) ;
+#637 = CYLINDRICAL_SURFACE ( 'NONE', #676, 0.2500000000000001100 ) ;
+#638 = EDGE_CURVE ( 'NONE', #195, #830, #426, .T. ) ;
+#639 = CIRCLE ( 'NONE', #616, 0.1655000000000001700 ) ;
+#640 = CARTESIAN_POINT ( 'NONE',  ( -5.463695987328526400E-016, 1.060741146872564000, -1.505499999999999600 ) ) ;
+#641 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#642 = LINE ( 'NONE', #543, #646 ) ;
+#643 = VECTOR ( 'NONE', #294, 39.37007874015748100 ) ;
+#644 = LINE ( 'NONE', #211, #658 ) ;
+#645 = ORIENTED_EDGE ( 'NONE', *, *, #40, .F. ) ;
+#646 = VECTOR ( 'NONE', #833, 39.37007874015748100 ) ;
+#647 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #674 ) ) ;
+#648 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#649 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#650 = FACE_OUTER_BOUND ( 'NONE', #919, .T. ) ;
+#651 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#652 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#653 = FACE_OUTER_BOUND ( 'NONE', #954, .T. ) ;
+#654 = CIRCLE ( 'NONE', #381, 0.04687499999999999300 ) ;
+#655 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#656 = VECTOR ( 'NONE', #136, 39.37007874015748100 ) ;
+#657 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #812, #288 ) ;
+#658 = VECTOR ( 'NONE', #154, 39.37007874015748100 ) ;
+#659 = LINE ( 'NONE', #134, #656 ) ;
+#660 = VERTEX_POINT ( 'NONE', #53 ) ;
+#661 = CIRCLE ( 'NONE', #262, 0.1574999999999998900 ) ;
+#662 = ORIENTED_EDGE ( 'NONE', *, *, #697, .F. ) ;
+#663 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#664 = PLANE ( 'NONE',  #526 ) ;
+#665 = EDGE_CURVE ( 'NONE', #937, #739, #411, .T. ) ;
+#666 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#667 = CIRCLE ( 'NONE', #316, 0.1655000000000001700 ) ;
+#668 = VECTOR ( 'NONE', #249, 39.37007874015748100 ) ;
+#669 = EDGE_CURVE ( 'NONE', #757, #939, #412, .T. ) ;
+#670 = LINE ( 'NONE', #247, #668 ) ;
+#671 = CIRCLE ( 'NONE', #188, 0.5875000000000001300 ) ;
+#672 = VECTOR ( 'NONE', #322, 39.37007874015748100 ) ;
+#673 = LINE ( 'NONE', #319, #672 ) ;
+#674 = PRODUCT ( 'Trellais_Base_2', 'Trellais_Base_2', '', ( #802 ) ) ;
+#675 = ORIENTED_EDGE ( 'NONE', *, *, #760, .T. ) ;
+#676 = AXIS2_PLACEMENT_3D ( 'NONE', #442, #106, #515 ) ;
+#677 = CIRCLE ( 'NONE', #230, 0.8999999999999999100 ) ;
+#678 = ORIENTED_EDGE ( 'NONE', *, *, #40, .T. ) ;
+#679 = ORIENTED_EDGE ( 'NONE', *, *, #780, .T. ) ;
+#680 = EDGE_LOOP ( 'NONE', ( #776, #899, #792, #460, #849, #915, #97, #332, #744, #694, #540, #692 ) ) ;
+#681 = EDGE_LOOP ( 'NONE', ( #242, #737, #721, #857 ) ) ;
+#682 = EDGE_CURVE ( 'NONE', #320, #320, #417, .T. ) ;
+#683 = ORIENTED_EDGE ( 'NONE', *, *, #334, .F. ) ;
+#684 = ORIENTED_EDGE ( 'NONE', *, *, #80, .F. ) ;
+#685 = EDGE_CURVE ( 'NONE', #751, #763, #409, .T. ) ;
+#686 = CARTESIAN_POINT ( 'NONE',  ( 0.04310274982936467700, 0.9077375800253002500, -1.345340128641096600 ) ) ;
+#687 = AXIS2_PLACEMENT_3D ( 'NONE', #52, #523, #107 ) ;
+#688 = ORIENTED_EDGE ( 'NONE', *, *, #780, .F. ) ;
+#689 = CARTESIAN_POINT ( 'NONE',  ( -0.1434656637721816700, 0.8950454831143117600, -1.422291100029821300 ) ) ;
+#690 = ORIENTED_EDGE ( 'NONE', *, *, #682, .F. ) ;
+#691 = VERTEX_POINT ( 'NONE', #527 ) ;
+#692 = ORIENTED_EDGE ( 'NONE', *, *, #926, .F. ) ;
+#693 = ADVANCED_FACE ( 'NONE', ( #408 ), #629, .F. ) ;
+#694 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ;
+#695 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ;
+#696 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#697 = EDGE_CURVE ( 'NONE', #900, #115, #398, .T. ) ;
+#698 = ORIENTED_EDGE ( 'NONE', *, *, #62, .F. ) ;
+#699 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#700 = EDGE_LOOP ( 'NONE', ( #690 ) ) ;
+#701 = ADVANCED_FACE ( 'NONE', ( #397 ), #536, .F. ) ;
+#702 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#703 = ORIENTED_EDGE ( 'NONE', *, *, #131, .F. ) ;
+#704 = ORIENTED_EDGE ( 'NONE', *, *, #869, .T. ) ;
+#705 = ADVANCED_FACE ( 'NONE', ( #402 ), #281, .T. ) ;
+#706 = VERTEX_POINT ( 'NONE', #58 ) ;
+#707 = ORIENTED_EDGE ( 'NONE', *, *, #896, .T. ) ;
+#708 = ORIENTED_EDGE ( 'NONE', *, *, #934, .F. ) ;
+#709 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ;
+#710 = ORIENTED_EDGE ( 'NONE', *, *, #127, .T. ) ;
+#711 = AXIS2_PLACEMENT_3D ( 'NONE', #557, #71, #120 ) ;
+#712 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#713 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
+#714 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#715 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
+#716 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#717 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#718 = EDGE_CURVE ( 'NONE', #864, #739, #395, .T. ) ;
+#719 = VERTEX_POINT ( 'NONE', #457 ) ;
+#720 = CARTESIAN_POINT ( 'NONE',  ( -0.3419776119402986300, 0.4777107523717784600, -1.000000000000000200 ) ) ;
+#721 = ORIENTED_EDGE ( 'NONE', *, *, #638, .F. ) ;
+#722 = ORIENTED_EDGE ( 'NONE', *, *, #80, .T. ) ;
+#723 = ORIENTED_EDGE ( 'NONE', *, *, #81, .F. ) ;
+#724 = CARTESIAN_POINT ( 'NONE',  ( 0.3419776119402984600, 0.4777107523717784600, -1.000000000000000200 ) ) ;
+#725 = EDGE_LOOP ( 'NONE', ( #257 ) ) ;
+#726 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#727 = ORIENTED_EDGE ( 'NONE', *, *, #186, .F. ) ;
+#728 = EDGE_CURVE ( 'NONE', #864, #790, #385, .T. ) ;
+#729 =( CONVERSION_BASED_UNIT ( 'INCH', #465 ) LENGTH_UNIT ( ) NAMED_UNIT ( #267 ) );
+#730 = PLANE ( 'NONE',  #55 ) ;
+#731 = ORIENTED_EDGE ( 'NONE', *, *, #534, .T. ) ;
+#732 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#733 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#734 = CARTESIAN_POINT ( 'NONE',  ( 0.2033659178868795500, 0.8807352497931432200, -3.000000000000000400 ) ) ;
+#735 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000000000400, 0.6809919235938120000, -3.000000000000000400 ) ) ;
+#736 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ;
+#737 = ORIENTED_EDGE ( 'NONE', *, *, #19, .T. ) ;
+#738 = AXIS2_PLACEMENT_3D ( 'NONE', #546, #475, #471 ) ;
+#739 = VERTEX_POINT ( 'NONE', #370 ) ;
+#740 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#741 = ORIENTED_EDGE ( 'NONE', *, *, #669, .F. ) ;
+#742 = ORIENTED_EDGE ( 'NONE', *, *, #752, .T. ) ;
+#743 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.6809919235938120000, -1.000000000000000200 ) ) ;
+#744 = ORIENTED_EDGE ( 'NONE', *, *, #669, .T. ) ;
+#745 = CARTESIAN_POINT ( 'NONE',  ( -5.463695987328526400E-016, 0.7373699539794775800, -1.505499999999999600 ) ) ;
+#747 = VERTEX_POINT ( 'NONE', #286 ) ;
+#746 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999600, 0.6809919235938120000, -1.000000000000000200 ) ) ;
+#748 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#749 = CARTESIAN_POINT ( 'NONE',  ( 0.1601970945664288300, 0.8915557081971854400, -1.462559412450504400 ) ) ;
+#750 = ORIENTED_EDGE ( 'NONE', *, *, #956, .F. ) ;
+#751 = VERTEX_POINT ( 'NONE', #373 ) ;
+#752 = EDGE_CURVE ( 'NONE', #59, #706, #380, .T. ) ;
+#753 = VERTEX_POINT ( 'NONE', #811 ) ;
+#754 = ORIENTED_EDGE ( 'NONE', *, *, #45, .F. ) ;
+#755 = AXIS2_PLACEMENT_3D ( 'NONE', #453, #56, #530 ) ;
+#756 = VERTEX_POINT ( 'NONE', #901 ) ;
+#757 = VERTEX_POINT ( 'NONE', #733 ) ;
+#758 = ORIENTED_EDGE ( 'NONE', *, *, #341, .F. ) ;
+#759 = ORIENTED_EDGE ( 'NONE', *, *, #244, .T. ) ;
+#760 = EDGE_CURVE ( 'NONE', #851, #751, #394, .T. ) ;
+#761 = ORIENTED_EDGE ( 'NONE', *, *, #166, .F. ) ;
+#762 = EDGE_LOOP ( 'NONE', ( #946 ) ) ;
+#763 = VERTEX_POINT ( 'NONE', #816 ) ;
+#764 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ;
+#765 = EDGE_LOOP ( 'NONE', ( #974, #723, #727, #678 ) ) ;
+#766 = EDGE_LOOP ( 'NONE', ( #817, #914, #801, #805, #709, #353 ) ) ;
+#767 = ORIENTED_EDGE ( 'NONE', *, *, #813, .F. ) ;
+#768 = AXIS2_PLACEMENT_3D ( 'NONE', #826, #234, #389 ) ;
+#769 = ORIENTED_EDGE ( 'NONE', *, *, #956, .T. ) ;
+#770 = EDGE_LOOP ( 'NONE', ( #800, #797, #809, #844 ) ) ;
+#771 = ORIENTED_EDGE ( 'NONE', *, *, #697, .T. ) ;
+#772 = ORIENTED_EDGE ( 'NONE', *, *, #81, .T. ) ;
+#773 = CARTESIAN_POINT ( 'NONE',  ( 0.01096858461318989600, 0.9089015226106074200, -1.340009181759160600 ) ) ;
+#774 = EDGE_LOOP ( 'NONE', ( #820, #835, #836, #722 ) ) ;
+#775 = EDGE_CURVE ( 'NONE', #848, #927, #376, .T. ) ;
+#776 = ORIENTED_EDGE ( 'NONE', *, *, #775, .T. ) ;
+#777 = EDGE_LOOP ( 'NONE', ( #704, #207, #698, #771 ) ) ;
+#778 = CARTESIAN_POINT ( 'NONE',  ( -0.1569740449793527400, 0.8922638404417874100, -1.451960427187773100 ) ) ;
+#779 = VERTEX_POINT ( 'NONE', #461 ) ;
+#780 = EDGE_CURVE ( 'NONE', #790, #719, #392, .T. ) ;
+#781 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#782 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
+#783 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#784 = AXIS2_PLACEMENT_3D ( 'NONE', #143, #201, #781 ) ;
+#785 = ADVANCED_FACE ( 'NONE', ( #367 ), #360, .T. ) ;
+#786 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ;
+#787 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#788 = EDGE_LOOP ( 'NONE', ( #679, #123, #847, #7 ) ) ;
+#789 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#790 = VERTEX_POINT ( 'NONE', #384 ) ;
+#791 = VERTEX_POINT ( 'NONE', #11 ) ;
+#792 = ORIENTED_EDGE ( 'NONE', *, *, #244, .F. ) ;
+#793 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.6809919235938120000, -3.000000000000000400 ) ) ;
+#794 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #63, #16 ) ;
+#795 = ORIENTED_EDGE ( 'NONE', *, *, #947, .T. ) ;
+#796 = ADVANCED_FACE ( 'NONE', ( #365 ), #911, .T. ) ;
+#797 = ORIENTED_EDGE ( 'NONE', *, *, #508, .F. ) ;
+#798 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999998200, -5.244785863205042700E-017, -3.000000000000000400 ) ) ;
+#799 = ORIENTED_EDGE ( 'NONE', *, *, #859, .T. ) ;
+#800 = ORIENTED_EDGE ( 'NONE', *, *, #284, .F. ) ;
+#801 = ORIENTED_EDGE ( 'NONE', *, *, #45, .T. ) ;
+#802 = PRODUCT_CONTEXT ( 'NONE', #272, 'mechanical' ) ;
+#803 = VERTEX_POINT ( 'NONE', #649 ) ;
+#804 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ;
+#805 = ORIENTED_EDGE ( 'NONE', *, *, #62, .T. ) ;
+#806 = EDGE_CURVE ( 'NONE', #936, #822, #363, .T. ) ;
+#807 = EDGE_LOOP ( 'NONE', ( #948, #943, #950, #964 ) ) ;
+#808 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#809 = ORIENTED_EDGE ( 'NONE', *, *, #903, .F. ) ;
+#810 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#811 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#812 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#813 = EDGE_CURVE ( 'NONE', #829, #195, #362, .T. ) ;
+#814 = ORIENTED_EDGE ( 'NONE', *, *, #926, .T. ) ;
+#815 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#816 = CARTESIAN_POINT ( 'NONE',  ( -0.2033659178868795500, 0.8807352497931432200, -3.000000000000000400 ) ) ;
+#817 = ORIENTED_EDGE ( 'NONE', *, *, #26, .T. ) ;
+#818 = ORIENTED_EDGE ( 'NONE', *, *, #9, .F. ) ;
+#819 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ;
+#820 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ;
+#821 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#822 = VERTEX_POINT ( 'NONE', #70 ) ;
+#823 = ORIENTED_EDGE ( 'NONE', *, *, #896, .F. ) ;
+#824 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#825 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#826 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
+#827 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#828 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#829 = VERTEX_POINT ( 'NONE', #467 ) ;
+#830 = VERTEX_POINT ( 'NONE', #390 ) ;
+#831 = AXIS2_PLACEMENT_3D ( 'NONE', #295, #748, #179 ) ;
+#832 = EDGE_LOOP ( 'NONE', ( #32, #130, #164, #189 ) ) ;
+#833 = DIRECTION ( 'NONE',  ( -1.370950816492604000E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#834 = CARTESIAN_POINT ( 'NONE',  ( 0.1486841504824485100, 0.8939936438474120900, -1.432010001220678700 ) ) ;
+#835 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ;
+#836 = ORIENTED_EDGE ( 'NONE', *, *, #166, .T. ) ;
+#837 = ORIENTED_EDGE ( 'NONE', *, *, #541, .F. ) ;
+#838 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#839 = VERTEX_POINT ( 'NONE', #74 ) ;
+#840 = EDGE_CURVE ( 'NONE', #864, #927, #348, .T. ) ;
+#841 = VERTEX_POINT ( 'NONE', #13 ) ;
+#842 = EDGE_CURVE ( 'NONE', #739, #719, #344, .T. ) ;
+#843 = EDGE_LOOP ( 'NONE', ( #853, #855, #856, #764 ) ) ;
+#844 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ;
+#845 = AXIS2_PLACEMENT_3D ( 'NONE', #963, #441, #50 ) ;
+#846 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ;
+#847 = ORIENTED_EDGE ( 'NONE', *, *, #718, .F. ) ;
+#848 = VERTEX_POINT ( 'NONE', #652 ) ;
+#849 = ORIENTED_EDGE ( 'NONE', *, *, #903, .T. ) ;
+#850 = AXIS2_PLACEMENT_3D ( 'NONE', #182, #973, #632 ) ;
+#851 = VERTEX_POINT ( 'NONE', #920 ) ;
+#852 = VERTEX_POINT ( 'NONE', #15 ) ;
+#853 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ;
+#854 = EDGE_LOOP ( 'NONE', ( #767, #761, #741, #710 ) ) ;
+#855 = ORIENTED_EDGE ( 'NONE', *, *, #240, .T. ) ;
+#856 = ORIENTED_EDGE ( 'NONE', *, *, #199, .F. ) ;
+#857 = ORIENTED_EDGE ( 'NONE', *, *, #127, .F. ) ;
+#858 = ORIENTED_EDGE ( 'NONE', *, *, #575, .T. ) ;
+#859 = EDGE_CURVE ( 'NONE', #156, #115, #358, .T. ) ;
+#860 = CARTESIAN_POINT ( 'NONE',  ( -0.02169339886360440200, 0.9086646133200405600, -1.341070620153132200 ) ) ;
+#861 = AXIS2_PLACEMENT_3D ( 'NONE', #444, #149, #345 ) ;
+#862 = CARTESIAN_POINT ( 'NONE',  ( -0.1643964897245952800, 0.8906226517141285800, -1.483550277347146300 ) ) ;
+#863 = VERTEX_POINT ( 'NONE', #76 ) ;
+#864 = VERTEX_POINT ( 'NONE', #472 ) ;
+#865 = ORIENTED_EDGE ( 'NONE', *, *, #9, .T. ) ;
+#866 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#867 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#868 = ORIENTED_EDGE ( 'NONE', *, *, #593, .F. ) ;
+#869 = EDGE_CURVE ( 'NONE', #115, #751, #346, .T. ) ;
+#870 = ADVANCED_FACE ( 'NONE', ( #331 ), #91, .T. ) ;
+#871 = EDGE_LOOP ( 'NONE', ( #750, #20, #49, #68 ) ) ;
+#872 = ORIENTED_EDGE ( 'NONE', *, *, #806, .T. ) ;
+#873 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#874 = VERTEX_POINT ( 'NONE', #506 ) ;
+#875 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#876 = ADVANCED_FACE ( 'NONE', ( #375 ), #957, .F. ) ;
+#877 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#878 = ORIENTED_EDGE ( 'NONE', *, *, #484, .T. ) ;
+#879 = EDGE_LOOP ( 'NONE', ( #823, #795, #933, #902, #941, #940, #868, #904, #819, #758, #129, #961 ) ) ;
+#880 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#881 = DIRECTION ( 'NONE',  ( -2.208330889770546000E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#882 = ORIENTED_EDGE ( 'NONE', *, *, #508, .T. ) ;
+#883 = ORIENTED_EDGE ( 'NONE', *, *, #30, .T. ) ;
+#884 = EDGE_LOOP ( 'NONE', ( #799, #662, #754, #888, #772 ) ) ;
+#885 = FILL_AREA_STYLE_COLOUR ( '', #282 ) ;
+#886 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#887 = AXIS2_PLACEMENT_3D ( 'NONE', #391, #404, #466 ) ;
+#888 = ORIENTED_EDGE ( 'NONE', *, *, #26, .F. ) ;
+#889 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#890 = EDGE_LOOP ( 'NONE', ( #968, #117, #85, #24 ) ) ;
+#891 = EDGE_LOOP ( 'NONE', ( #865, #708, #786, #684, #921, #916, #910, #906, #922, #930, #110, #707 ) ) ;
+#892 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #274 ) ;
+#893 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#894 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#895 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#896 = EDGE_CURVE ( 'NONE', #753, #791, #338, .T. ) ;
+#897 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#898 = EDGE_LOOP ( 'NONE', ( #287, #299, #311, #368 ) ) ;
+#899 = ORIENTED_EDGE ( 'NONE', *, *, #478, .T. ) ;
+#900 = VERTEX_POINT ( 'NONE', #695 ) ;
+#901 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.8356249999999997300, -3.000000000000000400 ) ) ;
+#902 = ORIENTED_EDGE ( 'NONE', *, *, #840, .F. ) ;
+#903 = EDGE_CURVE ( 'NONE', #852, #822, #325, .T. ) ;
+#904 = ORIENTED_EDGE ( 'NONE', *, *, #534, .F. ) ;
+#905 = ORIENTED_EDGE ( 'NONE', *, *, #752, .F. ) ;
+#906 = ORIENTED_EDGE ( 'NONE', *, *, #459, .F. ) ;
+#907 = ORIENTED_EDGE ( 'NONE', *, *, #240, .F. ) ;
+#908 = AXIS2_PLACEMENT_3D ( 'NONE', #258, #434, #38 ) ;
+#910 = ORIENTED_EDGE ( 'NONE', *, *, #575, .F. ) ;
+#909 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#911 = PLANE ( 'NONE',  #603 ) ;
+#912 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ;
+#913 = AXIS2_PLACEMENT_3D ( 'NONE', #640, #73, #560 ) ;
+#914 = ORIENTED_EDGE ( 'NONE', *, *, #22, .F. ) ;
+#915 = ORIENTED_EDGE ( 'NONE', *, *, #806, .F. ) ;
+#916 = ORIENTED_EDGE ( 'NONE', *, *, #638, .T. ) ;
+#917 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -1.505499999999999600 ) ) ;
+#918 = EDGE_LOOP ( 'NONE', ( #595, #858, #584, #572 ) ) ;
+#919 = EDGE_LOOP ( 'NONE', ( #221, #243, #255, #271 ) ) ;
+#920 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000009500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
+#921 = ORIENTED_EDGE ( 'NONE', *, *, #813, .T. ) ;
+#922 = ORIENTED_EDGE ( 'NONE', *, *, #284, .T. ) ;
+#923 = CARTESIAN_POINT ( 'NONE',  ( 0.1315959633413563700, 0.8972652091767202600, -1.404557255450115800 ) ) ;
+#924 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
+#925 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
+#926 = EDGE_CURVE ( 'NONE', #848, #660, #326, .T. ) ;
+#927 = VERTEX_POINT ( 'NONE', #787 ) ;
+#928 = AXIS2_PLACEMENT_3D ( 'NONE', #212, #270, #881 ) ;
+#929 = EDGE_LOOP ( 'NONE', ( #388, #405, #631, #505 ) ) ;
+#930 = ORIENTED_EDGE ( 'NONE', *, *, #199, .T. ) ;
+#931 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ;
+#932 = EDGE_LOOP ( 'NONE', ( #152, #82, #907, #759 ) ) ;
+#933 = ORIENTED_EDGE ( 'NONE', *, *, #478, .F. ) ;
+#934 = EDGE_CURVE ( 'NONE', #803, #21, #339, .T. ) ;
+#935 = EDGE_LOOP ( 'NONE', ( #971, #77, #905, #509, #731, #163, #614, #128 ) ) ;
+#936 = VERTEX_POINT ( 'NONE', #438 ) ;
+#937 = VERTEX_POINT ( 'NONE', #101 ) ;
+#938 = ORIENTED_EDGE ( 'NONE', *, *, #459, .T. ) ;
+#939 = VERTEX_POINT ( 'NONE', #702 ) ;
+#940 = ORIENTED_EDGE ( 'NONE', *, *, #665, .F. ) ;
+#941 = ORIENTED_EDGE ( 'NONE', *, *, #718, .T. ) ;
+#942 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#943 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ;
+#944 = VERTEX_POINT ( 'NONE', #150 ) ;
+#945 = CARTESIAN_POINT ( 'NONE',  ( -0.05327696250579244000, 0.9070723181441187100, -1.348433480799067900 ) ) ;
+#946 = ORIENTED_EDGE ( 'NONE', *, *, #682, .T. ) ;
+#947 = EDGE_CURVE ( 'NONE', #753, #841, #317, .T. ) ;
+#948 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ;
+#949 = EDGE_LOOP ( 'NONE', ( #818, #238, #878, #736 ) ) ;
+#950 = ORIENTED_EDGE ( 'NONE', *, *, #131, .T. ) ;
+#951 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007000, 0.8903699539794772700, -1.505499999999999600 ) ) ;
+#952 = VERTEX_POINT ( 'NONE', #793 ) ;
+#953 = CARTESIAN_POINT ( 'NONE',  ( 0.3419776119402984600, 0.4777107523717784600, -1.000000000000000200 ) ) ;
+#954 = EDGE_LOOP ( 'NONE', ( #703, #94, #846, #837, #250, #883, #742, #645, #931, #675, #507, #967, #769, #688, #79, #814 ) ) ;
+#955 = ADVANCED_FACE ( 'NONE', ( #318 ), #265, .F. ) ;
+#956 = EDGE_CURVE ( 'NONE', #944, #719, #315, .T. ) ;
+#957 = PLANE ( 'NONE',  #908 ) ;
+#958 = PLANE ( 'NONE',  #498 ) ;
+#959 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
+#960 = ADVANCED_FACE ( 'NONE', ( #310 ), #308, .F. ) ;
+#961 = ORIENTED_EDGE ( 'NONE', *, *, #205, .F. ) ;
+#962 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#963 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
+#964 = ORIENTED_EDGE ( 'NONE', *, *, #113, .T. ) ;
+#965 = AXIS2_PLACEMENT_3D ( 'NONE', #463, #399, #838 ) ;
+#966 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#967 = ORIENTED_EDGE ( 'NONE', *, *, #95, .T. ) ;
+#968 = ORIENTED_EDGE ( 'NONE', *, *, #95, .F. ) ;
+#969 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#970 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
+#971 = ORIENTED_EDGE ( 'NONE', *, *, #859, .F. ) ;
+#972 = SURFACE_SIDE_STYLE ('',( #314 ) ) ;
+#973 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#974 = ORIENTED_EDGE ( 'NONE', *, *, #147, .T. ) ;
+ENDSEC;
+END-ISO-10303-21;