1.0 KiB

Raw Permalink Blame History

Single Shot AR-15 Upper Receiver

Author

Proteus

Version

2.0

Caliber(s)

.380 ACP

Changelog

Fixed barrel to hold round correctly
Added rifling
Fixed issues with upper and re-split
Added single shot custom lower

Description

Print two halves of upper. MEK together, make sure the holes line up in a lower. Single shot lower included but will work on any AR-15 lower. Acquire metal FCG (Printed disconnector works). Put FCG into lower, you do not need mag release etc. Give barrel an acetone vapor treatment. Load barrel by inserting round in back, inserting into upper, twist 45 degrees for a lock. Roofing nail into firing pin hole, make sure it lines up with the hammer.

Note

Always check legality in your area, this would be considered a HANDGUN. For U.S. residents, you do not need to worry about the UFA with metal lowers. Plastic lowers is also probably not an issue as the FCG is all metal (however, be aware).

Credits

SS Lower inspired by the DefDist v5.0 Lower.

1.0 KiB Raw Permalink Blame History