fosscad-repo-frozen/Pistols/Skorpion_vz61_Lower_Receiver_v6-Daviot

Skorpion VZ-61

Author

Daviot

Version

6.0

Description

This is the VZ-61 Version 6 by Daviot. This version is a modification of brute's vz61 receiver that requires less tooling.

Changelog

Update 2/21/2017-Added threads to the lower receiver to allow the grip screw to thread into the printed receiver as on the metal versions, as finding a tap for ISO M15x1 RH threads is a pain. Also included is a printable M15x1 RH nut to testfit if your printer can print adequate threads.-Daviot

Update 4/22/2014

• Increased OAL between takedown pin hole and buffer tower .014 in
• tightened magwell length to proper spec
• adjusted mag release button diameter and slot
• adjusted bolt hold open hole diameter and made cut for clearance on bottom
• adjusted fcg hole diameter
• increased material behind ejector to improve strength
• added fillets inside fcg pocket to improve strength
• increase pistol grip hole size
• adjusted pistol grip slot for more clearance towards front
• added stock clearance cut and retainer hole
• added clearance for stock when open
• added clearance cut for fcg pin to sit flush
• added two 'lightening' on sides of magwell as well as buffer tower rear for cosmetics.

Build notes (Daviot)

• This new v6 includes printed threads for the grip screw. If you would rather cut said threads yourself, use the the v5 model and use a high-speed steel tap.
• If printing in ABS, the magazine well will require sanding and test fitting due to shrinkage.
• If building a semi-auto Vz-61 from a military parts kit, you will need either a semi-auto sear or to cut the interruptor prong off the sear and a semi-auto selector switch.