1.6 KiB
1.6 KiB
Skorpion VZ-61
Author
Daviot
Version
6.0
Description
This is the VZ-61 Version 6 by Daviot. This version is a modification of brute's vz61 receiver that requires less tooling.
Changelog
Update 2/21/2017-Added threads to the lower receiver to allow the grip screw to thread into the printed receiver as on the metal versions, as finding a tap for ISO M15x1 RH threads is a pain. Also included is a printable M15x1 RH nut to testfit if your printer can print adequate threads.-Daviot
Update 4/22/2014
- Increased OAL between takedown pin hole and buffer tower .014 in
- tightened magwell length to proper spec
- adjusted mag release button diameter and slot
- adjusted bolt hold open hole diameter and made cut for clearance on bottom
- adjusted fcg hole diameter
- increased material behind ejector to improve strength
- added fillets inside fcg pocket to improve strength
- increase pistol grip hole size
- adjusted pistol grip slot for more clearance towards front
- added stock clearance cut and retainer hole
- added clearance for stock when open
- added clearance cut for fcg pin to sit flush
- added two 'lightening' on sides of magwell as well as buffer tower rear for cosmetics.
Build notes (Daviot)
- This new v6 includes printed threads for the grip screw. If you would rather cut said threads yourself, use the the v5 model and use a high-speed steel tap.
- If printing in ABS, the magazine well will require sanding and test fitting due to shrinkage.
- If building a semi-auto Vz-61 from a military parts kit, you will need either a semi-auto sear or to cut the interruptor prong off the sear and a semi-auto selector switch.