19 lines
1.1 KiB
Markdown
19 lines
1.1 KiB
Markdown
# Steyr Pistol Magazine Extension
|
|
|
|
#### Author
|
|
crysys
|
|
|
|
#### Version
|
|
2.5
|
|
|
|
#### Description
|
|
A replacement bottom cap for Steyr 9mm pistol magazines. This one adds three rounds to the 17 round factory magazine, or 5 rounds if you have the older 15 round magazine though it is not tested. The components are front and back magazine cap pieces and a new spring plate. The spring plate is thin and should be reinforced with a small piece of sheet metal cut to fit underneath it. Larger sizes may be added if they are tested and found to function.
|
|
|
|
Print these three pieces, front and back cap faces down and spring plate on back end. Trim front and back pieces until they fit, glue together. Cut a small piece of sheet metal in shape of the bottom of spring plate, ensure it fits in bottom of cap. Reassemble magazine with new parts.
|
|
|
|
The cap pieces are designed to be easy to make on most printers. The spring plate is delicate and can be a challenging print, use plenty of support. I recommend ABS, PLA is likely too brittle and is untested.
|
|
|
|
If you have problems or improvements visit the IRC channel #fosscad on irc.oftc.net.
|
|
|
|
pew pew
|