1.1 KiB
1.1 KiB
Vanguard AR-15 Receiver
Author
shadowfall
Version
1.2
Description
The Vanguard series is designed to minimize support material and add ease of printing to the lower design. #### Instructions Set support settings to .40 (40 degrees). If your printer cannot print 40 degree overhangs a higher number may be chosen, this will increase printing time. An 8" build platform is required for this version. The model should be oriented horizontally as seen in the renders.
Changelog Vanguard 1.2
*fixed overhang in trigger pocket so trigger springs function *smoothed rough edges near bolt hold open.
Changelog Vanguard 1.1
- fixed cosmetic defects near mag release
Changelog Vanguard 1.0
- based off the hermes 1.3.3 model
- increased depth of front take down lug recess.
- removed portions of the bottom of the trigger pocket -added spring guides for the trigger.
- expanded buffer end plate hole.
- redesigned magwell profile for ease of printing.
- removed majority of fillets.
- reprofiled the buffer reinforcement to reduce support required.