Mirrors
/
fosscad-repo-frozen
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fosscad-repo-frozen/Rifles/Madsen_M-50-Magazine_Extens...
History
user ae105486ee Adding M-50 Magazine (Short) Extension by n0mad. 2018-09-18 20:17:50 -07:00
..
F3D Adding M-50 Magazine (Short) Extension by n0mad. 2018-09-18 20:17:50 -07:00
Renders Adding M-50 Magazine (Short) Extension by n0mad. 2018-09-18 20:17:50 -07:00
STEP Adding M-50 Magazine (Short) Extension by n0mad. 2018-09-18 20:17:50 -07:00
STL Adding M-50 Magazine (Short) Extension by n0mad. 2018-09-18 20:17:50 -07:00
README.MD Adding M-50 Magazine (Short) Extension by n0mad. 2018-09-18 20:17:50 -07:00

README.MD

N0mad's madsen m50 short magazine extension

Author

n0mad

Version

8.0

License

Copyright 2018 distributed under the GNU General Public License v3.0 (GPLv3).

Release Date

2018/09/18

Description

This is a two part magazine extension for madsen m50 magazines.

Test Record

This was tested on with a madsen m50 submachine gun. As of version 8 it feeds and runs when loaded up to 40 rounds (+8 rounds).

Printing

  • All printed parts were printed out of PETG, with an infill of 25%. Abs should also work.
  • No support material needed.
  • Print both pieces on their back to prevent the use of supports.

Finishing

  • Aquire four bolts of the appropriate diameter and length. I used chicago screws and bolts for a cleaner finish.
  • Drill out holes to fit bolt size.
  • Existing factory springs will work.
  • Clamp around magazine bolt down, no floor plate needed.

DISCLAIMER

Use this information at your own risk and responsibility.