978 B

Raw Permalink Blame History

N0mad's madsen m50 short magazine extension

Author

n0mad

Version

8.0

License

Copyright 2018 distributed under the GNU General Public License v3.0 (GPLv3).

Release Date

2018/09/18

Description

This is a two part magazine extension for madsen m50 magazines.

Test Record

This was tested on with a madsen m50 submachine gun. As of version 8 it feeds and runs when loaded up to 40 rounds (+8 rounds).

Printing

All printed parts were printed out of PETG, with an infill of 25%. Abs should also work.
No support material needed.
Print both pieces on their back to prevent the use of supports.

Finishing

Aquire four bolts of the appropriate diameter and length. I used chicago screws and bolts for a cleaner finish.
Drill out holes to fit bolt size.
Existing factory springs will work.
Clamp around magazine bolt down, no floor plate needed.

DISCLAIMER

Use this information at your own risk and responsibility.