27 lines
1.2 KiB
Markdown
27 lines
1.2 KiB
Markdown
# WarFairy Hermes AR-15
|
|
|
|
#### Version
|
|
1.3
|
|
|
|
#### Description
|
|
|
|
This release is meant to be the lightest AR-15 lower possible. Total weight, not including any support material used, is just a hair over 0.65 pounds (+/- 295 grams)
|
|
|
|
#### Instructions
|
|
|
|
Support material should not be required for any parts except the trigger guard section.
|
|
|
|
Print all parts with as fine layer height as possible, 100% infill. All parts are oriented for printing.
|
|
|
|
Parts should be bonded with Acetone or Weld-On #3 or #4. Parts should be smoothed lightly with acetone or MEK. Ensure interior of buffer tube sections are free of protrusions and are reasonably smooth.
|
|
|
|
Do NOT test fire for 24 hours after bonding parts together to allow bonds to fully set.
|
|
|
|
NOTE: If you have trouble printing the plug, make a simple cylinder with a diameter of .255 inches and use that to hold the buffer retainer and spring, then sand it flat against the receiver.
|
|
|
|
##### Known Issues
|
|
|
|
Slic3r v0.98 fills in the trigger pin and hammer pin holes. v0.99 fixes the issue. Ensure your slicing program is up to date.
|
|
|
|
Please report any issues to the #fosscad IRC channel on irc.oftc.net or via the chat link on www.fosscad.org. Please include pictures if possible.
|