1.3 KiB

Raw Blame History

N0mad's madsen m50 extra long magazine extension

Author

n0mad

Version

8.0

License

Copyright 2018 distributed under the GNU General Public License v3.0 (GPLv3).

Release Date

2018/09/18

Description

This is a two part magazine extension for madsen m50 magazines.

Test Record

This was tested on with a madsen m50 submachine gun. As of version 8 it feeds and runs when loaded up to 49 rounds (+17).

Printing

All printed parts were printed out of PETG, with an infill of 25%. Abs should also work.
No support material needed
Print both pieces on their backs to preven the need of infill.
Print barrel standing on it rear end.

Finishing

Aquire six bolts of the appropriate diameter and length. I used chicago screws and bolts for a cleaner finish.
Drill out holes to fit bolt size.
A longer magazine spring will be required. This extension should work with extended glock springs.
I used the one found here. https://taccom3g.com/product/taccom-spring-kits/ The bolts and chicago screws will also work.
The existing follower will need to be removed and affixed the the glock spring.
Clamp around magazine bolt down, no floor plate needed.

DISCLAIMER

Use this information at your own risk and responsibility.