1.6 KiB

Raw Blame History

Skorpion VZ-61

Author

Daviot

Version

6.0

Description

This is the VZ-61 Version 6 by Daviot. This version is a modification of brute's vz61 receiver that requires less tooling.

Changelog

Update 2/21/2017-Added threads to the lower receiver to allow the grip screw to thread into the printed receiver as on the metal versions, as finding a tap for ISO M15x1 RH threads is a pain. Also included is a printable M15x1 RH nut to testfit if your printer can print adequate threads.-Daviot

Update 4/22/2014

Increased OAL between takedown pin hole and buffer tower .014 in
tightened magwell length to proper spec
adjusted mag release button diameter and slot
adjusted bolt hold open hole diameter and made cut for clearance on bottom
adjusted fcg hole diameter
increased material behind ejector to improve strength
added fillets inside fcg pocket to improve strength
increase pistol grip hole size
adjusted pistol grip slot for more clearance towards front
added stock clearance cut and retainer hole
added clearance for stock when open
added clearance cut for fcg pin to sit flush
added two 'lightening' on sides of magwell as well as buffer tower rear for cosmetics.

Build notes (Daviot)

This new v6 includes printed threads for the grip screw. If you would rather cut said threads yourself, use the the v5 model and use a high-speed steel tap.
If printing in ABS, the magazine well will require sanding and test fitting due to shrinkage.
If building a semi-auto Vz-61 from a military parts kit, you will need either a semi-auto sear or to cut the interruptor prong off the sear and a semi-auto selector switch.

1.6 KiB Raw Blame History