GunChleoc has brought to my attention an inability to create the
Scottish Gaelic (gd) translation files for the GParted help
manual using Damned Lies. In an effort to work around this challenge
I am adding "gd" to LINGUAS in help/Makefile.am, and also adding a
template help/gd/gd.po file for translation.
Work on bug 701075 inadvertently introduced a problem where ext2/3/4,
resierfs, and ntfs file systems were rounding the file system size up
to the nearest kiB.
The problem was discovered when a user resized a partition by moving
only the start boundary to the right thereby shrinking the partition.
In the situation where the resulting partition size was not an integer
kiB value (such as might occur on a 512 byte per sector device) the
file system size was rounded up to the nearest kiB. This resulted in
a file system size being set one sector larger than the partition
size.
This problem was introduced with the following commit:
Shrink file systems to exact size (#701075)
3461413d28
The fix chosen for this problem involved removing the rounding logic.
Bug 723543 - Shrink ext2/3/4 results in attempt to set partition
smaller than file system
Only recognises partitions containing BitLocker Disk Encryption content.
No other actions are supported.
Bug #723232 - BitLocker Disk Encryption not recognised
Restore the order of the source files so that they are once again
compiled in order A-Z, a-z. Order is obtained with:
fgrep .cc src/Makefile.am | LANG=C sort
fgrep .h include/Makefile.am | LANG=C sort
Make the dialog resizable, add a vertical scrollbar and set the minimum
(and therefore initial) height to 500 pixels. This is so that the
dialog entirely fits on an 800x600 screen, thus allowing the rescan
button to be pressed.
100 pixel difference is to account for the size of the top and bottom
GNOME 2 panels and two sets of title bars. Two sets of title bars
because the window manager tries to place the top of dialog title bars
in line with the bottom of the main window title bar.
Bug #342682 - too much information in 'features' dialog
Use padding to indent the legend narrative to better show hierarchy and
association with the "Legend" category as recommended in the:
GNOME HIG 2.2.3 / Visual Design / Window Layout
https://developer.gnome.org/hig-book/stable/design-window.html.en
Padding the legend narrative widget also deliberately increases the
spacing to the legend icons too.
Bug #342682 - too much information in 'features' dialog
Make the legend always shown, ready for when the dialog is resizable.
Change the widget containing the legend from an expander to a frame
widget. Set the frame to be borderless using a bold label as
recommended in the GNOME Human Interface Guidelines 2.2.1 / Controls /
Frames and Separators.
https://developer.gnome.org/hig-book/2.32/controls-frames.html.en
Bug #342682 - too much information in 'features' dialog
The DialogFeatures::DialogFeatures() constructor used four levels of
nested code blocks and reused the same variable names at multiple
levels. The variable hbox was used at three of the four levels. This
was done by commit:
91b971691d
Bug #634090: Change some attributes to local variables
In my opinion this made the code hard to understand. Give every local
variable a unique and meaningful name and remove the nested code blocks.
This is part of parent bug:
Bug #721455 - Obsolete info in license text on multiple modules
and GNOME Goal:
https://wiki.gnome.org/Initiatives/GnomeGoals/Proposals
* verify all source files to make sure they have a license and a
copyright, and that both are up-to-date
Bug #721565 - License text contains obsolete FSF postal address
Write a loop partition table to a disk and then try to create a new
partition on that disk crashes GParted.
Analysis:
1) Loop partition table, actually just the signature / label
"GNU Parted Loopback 0", is written to the disk.
2) create_partition() calls ped_disk_app_partition() to create the
partition which, arguably erroneously, clears the loop signature.
3) In erase_filesystem_signatures(), get_device_and_disk() fails because
there's no longer a loop signature for libparted to recognise. This
leaves lp_device, lp_disk and lp_partition = NULL, but incorrectly
overall_success = true.
4) Overall_success = true allows the signature erasure loop to run and
evaluate lp_device->sector_size, dereferencing a NULL pointer and
crashing GParted.
Fix erase_filesystem_signatures() to correctly handle failure from
get_device_and_disk(), broken by this commit:
246e05559d
Clear btrfs file system super block mirror copies too (#705426)
Bug #721988 - Crash when creating new partition on disk with loop label
In the Create Partition Table dialog display the entries in the combobox
in order.
Previously the default of MSDOS or GPT was moved to the first item in
the combobox. Now the partition table types remain in order with just
either MSDOS or GPT being selected as as the default as required.
The partition table types are displayed in the order supplied by
libparted, which is alphabetic except with "loop" last.
Bug #711098 - Default partition table can not handle > 2 TiB disks
MSDOS partition table is limited to addressing 2^32 sectors, limiting
disks using 512 byte sectors to 2 TiB in size. Fdisk reports the
following warning on disks 2 TiB and larger.
# truncate -s 2T /var/tmp/loop-2T
# losetup /dev/loop0 /var/tmp/loop-2T
# fdisk /dev/loop0
WARNING: The size of this disk is 2.2 TB (2199023255552 bytes).
DOS partition table format can not be used on drives for volumes
larger than (2199023255040 bytes) for 512-byte sectors. Use parted(1) and GUID
partition table format (GPT).
(Fdisk arguably reports this warning one sector too early. Anyway for
safety and consistency GParted will use this limit too). Continue to
use MSDOS as the default partition table type for disks smaller than 2
TiB and use GPT as the default for disks 2 TiB and larger. This
maximises compatibility.
Also remove the advanced expander and always show the partition table
list box.
Bug #711098 - Default partition table can not handle > 2 TiB disks
When the kernel version as stated in /proc/version did not have at least
three numbers separated by periods, the version would fail to be read.
Sample /proc/version to demonstrate problem:
Linux version 3.10-3-686-pae ...
The Linux kernel will always have a major number and a minor number
separated by a period. There is likely also a patch version number too
that would be preceded by a period. This enhancement will read 2 and 3
component Linux kernel versions.
GParted doesn't report extended partitions as busy if it contains only
busy LVM2 PV or SWRAID logical partitions. Libparted's
ped_partition_is_busy() only detects mounted file systems and swap space
as busy, not active LVM2 PVs or SWRAID members. This is as of libparted
3.1 and earlier.
Fix by determining the busy status of an extended partition based solely
on the busy status of the logical partitions it contains. This makes it
unnecessary to check for mounted DMRAID logical partitions or call
ped_partition_is_busy() for extended partitions.
Bug #712533 - Partitions not detected as busy inside Software RAID on
some distros
In this unusual setup of having one Linux Software RAID array
partitioned and a second array not partitioned, /dev/md1p1 partition in
the first array is falsely reported as busy when the file system filling
the second array /dev/md2 is mounted.
Partition RAID File System Mount mount
--------- ----------------- ---------------- -----------
/dev/sdb1 SWRAID /dev/md1
/dev/md1p1 ext4,Label=test1 (Unmounted)
/dev/sdb2 SWRAID /dev/md2 ext4,Label=test2 /mnt/2
This again affects Debian 6, Debian 7 and RHEL/CentOS 6.x and is as a
result of the this bug fixed in libparted 2.4:
http://git.savannah.gnu.org/cgit/parted.git/commit/?id=db52898c214310dab4ed84e6cb2f9ffc8c3aa502
linux: also detect "in-use" dmraid and scsi-Nth (N>=16) partition
Fix by not using libparted's ped_partition_is_busy() to determine if a
normal or logical partition is busy.
Bug #712533 - Partitions not detected as busy inside Software RAID on
some distros
On some distributions GParted doesn't detect when a file system is busy
and mounted when the partition is within a Linux Software RAID array.
Affected distributions include: Debian 6, Debian 7 and RHEL/CentOS 6.x.
This is because of a bug in libparted 2.3 and earlier. It was fixed by
this change in libparted 2.4:
http://git.savannah.gnu.org/cgit/parted.git/commit/?id=db52898c214310dab4ed84e6cb2f9ffc8c3aa502
linux: also detect "in-use" dmraid and scsi-Nth (N>=16) partition
Ubuntu 13.10 with libparted 2.3 is not affected because it contains a
distribution specific patch to correct it.
Fix by using GParted's internal mounted partitions map, mount_info, to
determine if a partition is busy, in addition to using libparted's
ped_partition_is_busy().
Bug #712533 - Partitions not detected as busy inside Software RAID on
some distros
Many file systems are capable of growing while mounted, and a few can
even shrink. This support must be explicitly enabled at configure time
with the --enable-online-resize flag and depends on a patched libparted.
Also requires kernel >= 3.6 for partition resizing, even if the
partition is in use (BLKPG_RESIZE_PARTITION).
Thanks to Mike Fleetwood for double check mark idea instead of a second
column to show the online grow/shrink.
Bug #694622 - Add support for online resize
Curtis Gedak