Most file systems report intrinsic unallocated space using the statvfs()
system call when mounted, but not using their own tools. They are:
ext2/3/4, fat16/32, hfs, nilfs2, reiserfs and xfs. Showing either a
little or no unallocated space, depending on whether a file system is
mounted or not, could be confusing to the user.
When all file systems are created filling their partitions the unused
figure reported by statvfs() and their own tools are the same or very
close. Also the used plus unallocated figure from statvfs() agrees with
the used figure from their own tools.
For all file systems don't display intrinsic unallocated space (that
below the threshold of 2 to 5%), instead include it as used space. As
soon as the amount of unallocated space becomes significant display it
everywhere and also trigger the warning.
For display purposes always use the new Partition methods:
get_sectors_used(), get_sectors_unused(), and get_sectors_unallocated().
When calculating new usage figures during Paste and Resize/Move
operations directly access sectors_used, sectors_unused and
sectors_unallocated members.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
A number of file systems report intrinsic unallocated space even when
they are created filling the partition. As reported using their own
specific tools, they are: jfs, lvm2 pv and ntfs. Therefore when
resizing a partition estimate its minimum size to be used sectors plus
any unallocated sectors up to the significant amount.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
The btrfs programs only provide approximations of file system sizes
because they display figures using binary prefix multipliers to two
decimal places of precision. E.g. 2.00GB. For partition sizes where
the contained file system size rounds upwards, GParted will fail to read
the file system usage and report a warning because the file system will
appear to be larger than the partition.
For example, create a 2047 MiB partition containing a btrfs file system
and display its size.
# btrfs filesystem show
Label: none uuid: 92535375-5e76-4a70-896a-8d796a577993
Total devices 1 FS bytes used 28.00KB
devid 1 size 2.00GB used 240.62MB path /dev/sda12
The file system size appears to be 2048 MiB, but that is larger than the
partition, hence the issue GParted has. (Actually uses the btrfs devid
size which is the size of the btrfs file system within the partition in
question).
This issue is new with the fix for Bug #499202 because it queries the
file system sizes for the first time. The same issue could
theoretically occur previously, but with the used figure (FS bytes
used). This would have been virtually impossible to trigger because
btrfs file system would have to have been greater than 99% full, but
btrfs has been notorious for early reporting of file system full.
The fix is that if a btrfs file system size appears larger than the
partition size, but the minimum possible size which could have been
rounded to the reported figure is within the partition size use the
smaller partition size instead. Apply the method to the used figure
too, in case the file system is 100% full. Also if the btrfs file
system size appears smaller than the partition size, but the maximum
possible size which could have been rounded to the reported figure is
within the partition size use the larger partition size instead to avoid
reporting, presumably false, unallocated space. Not applied to file
system used figure.
Bug 499202 - gparted does not see the difference if partition size
differs from filesystem size
When pasting a copied partition into free space or move/resizing a
partition set its space utilisation so that any unallocated space within
the partition is displayed correctly before the operation is applied.
NOTE:
If the file system does not support file system resizing the Paste and
Move/Resize dialogs don't allow resizing the partition so the preview
will always be correct, unlike the case in the previous patch:
Set unallocated space when performing simple operations (#499202)
Also remove the deprecated and no longer used Partition::Set_Unused()
and Partition::set_used() methods.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
Display the unallocated space within a partition in the main window's
graphical disk representation.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
Add reporting of the LVM2 Physical Volume size allowing the unallocated
space in the partition to be calculated.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
Update file system specific implementations to set the size and free
space, thus allowing the unallocated space in the partition to be
calculated, for the following unmounted file systems:
btrfs, ext2, ext3, ext4, fat16, fat32, jfs, nilfs2, ntfs, reiserfs,
reiser4, xfs
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
Display the unallocated space in the graphical partition representation
and numeric figures in the Partition Information dialog.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
Currently GParted assumes that a file system fills its containing
partition. This is not always true and can occur when resizing is
performed outside of GParted or a resize operation fails. GParted
doesn't display any information about unallocated space to the user
and in most cases it is simply included in used space.
Add partition unallocated space accounting. Make GParted record the
unallocated space for mounted file system and display a warning in the
Partition Information dialog when too much unallocated space is found.
Partition::set_sector_usage( fs_size, fs_unused ), is the new preferred
method of recording file system usage because it allows the unallocated
space in a partition to be calculated. Partition::Set_Unused() and
Partition::set_used() are now deprecated.
NOTES:
1) Set the minimum unallocated space to be 5% before considering it
significant to avoid false reporting. Worst case found was a
mounted xfs file system in a 100MiB partition, which reports as
~4.7% unallocated according to file system size from statvfs().
However, it reports as having no unallocated space using xfs
specific tools.
2) Unallocated space is only a graphical representation for the user.
GParted must still use relevant tools to resize file systems before
shrinking the data and can't assume all unallocated space exists
after the file system at the end of the partition.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
The parted-3.1 release brings back FAT16/FAT32 and HFS/HFS+ file
system resize capabilities in a new libparted fs resize library.
The following operations are again available when GParted is linked
with parted-3.1:
FAT16 - grow and shrink
FAT32 - grow and shrink
HFS - shrink
HFS+ - shrink
Note that there is a difference in how move actions are handled for
FAT16/FAT32 file systems based on parted version.
When GParted is linked with parted >= 3.0:
FAT16 - move performed internally by GParted
FAT32 - move performed internally by GParted
When GParted is linked with parted < 3.0:
FAT16 - move performed by libparted
FAT32 - move performed by libparted
Thanks goes to Jim Meyering for restoring these file system resizing
capabilities in Parted 3.1 with a new libparted fs resize library.
Closes Bug #668281 - minimal file-system resize API? (FAT and HFS*
only)
Also update to use LVM terminology, such that a Physical Volume is
referred to as a member of a Volume Group. Status of an LVM2 PV is now
displayed using one of the following messages:
Not active (Not a member of any volume group)
VGNAME not active
VGNAME not active and exported
VGNAME active
Bug #160787 - lvm support
GParted would crash if there were any embeded spaces in the output from
the command used to query LVM2 PVs. There aren't normally any embeded
spaces, but they can occur in certain degrated situations. For example
if one of the PVs in a VG spanning two PVs is lost the PV is displayed
as "unknown device" rather than its actual device name:
# lvm pvs --nosuffix --units b --separator , -o pv_name,pv_free,vg_name,lv_name,lv_attr
Couldn't find device with uuid DMEi8r-9Vvy-w0Ok-CSSn-oLmY-YrY3-1PBznz.
PV,PFree,VG,LV,Attr
/dev/sda11,2143289344,GParted-VG1,,
unknown device,1619001344,GParted-VG1,lvol0,-wi---
unknown device,1619001344,GParted-VG1,,
This was loaded into the cache as:
["/dev/sda11,2143289344,GParted-VG1,,",
"unknown",
"device,1619001344,GParted-VG1,lvol0,-wi---",
"unknown",
"device,1619001344,GParted-VG1,,"]
The crash would happen when trying to access the VG name or LV flags on
a line without enough comma separated fields.
Improve parsing of the output from "lvm pvs" so that lines are not split
on embeded spaces. Don't crash on lines without without enough comma
separated fields.
Bug #160787 - lvm support
Previously any errors which occurred when running LVM commands used to
load the LVM2_PV_Info cache were simply ignored and the cache wasn't
loaded. This lead to missing information about LVM2 PVs, but the user
had no indication as to why.
Now when any errors occur the command ran and all output is captured.
This is displayed to the user, along with a suitable warning message, in
the Partition Information dialog.
Bug #160787 - lvm support
Create function Utils::kernel_version_at_least() to check that the
current Linux kernel is a particular version or higher.
Update nilfs2 to use this function to determine whether the kernel is
new enough to support file system resizing.
Previously used "dmsetup info" to directly list device-mapper mapping
names in the kernel to identify active Logical Volumes. However GParted
failed to recognise active LVs if the VGNAME contains any hyphens (-).
This is because LVM encodes hyphens as double hyphens in the mapping
name.
To avoid having to duplicate the LVM hyphen encoding in GParted, switch
to using "lvm lvs" to list LVs.
# dmsetup info --columns --noheadings --separator , -o name
GParted_VG1-lvol_00
GParted--VG2-lvol--00
# lvm lvs --noheadings --separator , -o lv_name,vg_name,lv_attr
lvol_00,GParted_VG1,-wi-a-
lvol-00,GParted-VG2,-wi-a-
lvol-01,GParted-VG3,-wi---
.^.
(-) not active, (a) or any other character considered active. Reference
lvs(8).
Bug #160787 - lvm support
As the Mount Point column is being borrowed to display the PV's VGNAME,
also suppress generation of the "Mount on" submenu for LVM2 PVs.
Bug #160787 - lvm support
Previously when GParted was started LVM2_PV_Info cache was loaded twice,
executing LVM2 PV querying commands twice. Firstly when
lvm2_pv::get_filesystem_support() was checking if LVM2 PV support was
available, and secondly when forced by a refresh in
GParted_Core::set_devices().
Implement lazy initialization. Only load the cache when forced by the
above mentioned refresh or having to return a value when the cache is
not yet loaded. Do not initialize the cache when just checking if LVM2
PV support is available.
Bug #160787 - lvm support
Cache results from querying all LVM2 PVs in one go to minimise the
number of times lvm commands are executed. Take inspiration from
caching performed by FS_Info and Proc_Partitions_Info.
Bug #160787 - lvm support
Add minimal support for just reporting the space usage of LVM2 PVs.
Accept libparted / blkid detection of LVM2 PVs first, falling back on
GParted's specific detection code otherwise. Maintain LVM not supported
warning message.
Bug #160787 - lvm support
This is the first step of adding support for just LVM2 Phyiscal Volumes,
a subset of full LVM2 support.
Make it clear that it is only LVM2 PVs being treated like a file system.
Bug #160787 - lvm support
Add the ability to set a new random UUID on file systems that provide
the appropriate tools to perform this action.
Update the help manual to include this new functionality. Also add
reference links to "setting a partition label" and "changing a
partition UUID" in the "copying and pasting a partition" section.
This patch does not include setting the UUID on an NTFS file system.
Bug #667278 - Add support for setting UUID
Bug #608308 - fix documentation - Copying and Pasting a Partition
There is a lot of commonality and code repetition for resizing of file
systems which can only be resized while mounted. Resizing of btrfs, jfs
and xfs all follow the pattern: mkdir, mount, resize, umount and rmdir.
Copying an xfs file system also uses a similar pattern, but for the
source and destination xfs file systems simultaneously.
Add three helper functions to the FileSystem class which implement
common tasks, allowing mounted file system resizing to be implemented
more simply.
Also add a function to the Utils class which checks whether the kernel
supports a file system. It handles the case of non-loaded modules,
which currently leads to reporting the growing of jfs and xfs as
unsupported.
We used to just log libparted exceptions without handling them. This patch
changes the exception handler to display a modal dialog box and return the
chosen action to libparted.
Requires libparted 2.4 or higher, or blkid from utils-linux 2.20 or
higher for nilfs2 file system detection.
Requires nilfs-utils for nilfs2 file system support.
Closes Bug #642842 - nilfs is not detected
When a new operation is added to operations list, check if a merge
is possible depending on the operation type:
OPERATION_RESIZE_MOVE: 2 consecutive "resize" operations on the
same partition
OPERATION_LABEL_PARTITION: 2 "label change" operations (need not be
consecutive) on the same partition
OPERATION_CHECK: 2 "check" operations (need not be
consecutive) on the same partition
OPERATION_FORMAT: 2 consecutive "format" operations on the
same partition
Closes Bug #438573 - Cancel out overlapping actions
Also fix a bug when copying partition using the Partition::Set(...)
method. This method did not initialize "sectors_used" and
"sectors_unused" members.
Some classes contained private attributes which were used only by a single
member function. Such items were moved to the corresponding function implementations
to stress their limited usage scope.
A few unused variables were also deleted.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
The release of (lib)parted 3.0 includes a change to the Application
Programing Interface - API. Most importantly, libparted 3.0 removes
many file system specific function calls, and hence the capabilities
provided by these functions. In order for GParted to compile and link
with libparted 3.0, this libparted functionality is lost.
Specifically, the functionality that is lost when GParted is compiled
and linked with libparted 3.0 is as follows:
- Loss of ability to grow and shrink FAT16 and FAT32 file systems
- Loss of ability to shrink HFS and HFS+ file systems
- Loss of ability to determine used and unused sectors in HFS and
HFS+ file systems
- Loss of ability to erase file system signatures on partition
create and format
It is hoped that other free software projects will include some or all
of the above lost functionality, which can then be added back to
GParted.
This commit includes a change in how FAT16 and FAT32 file systems are
moved. Specifically the move is now performed internally by GParted
when linked with libparted 3.0. The move functionality is provided by
libparted for prior libparted versions (e.g. less than 3.0).
This is the final enhancement in a series of commits that enable
GParted to compile with libparted version 3.0.
Closes Bug #651559 - Doesn't compile against parted 3.0
Usage of the kpartx package to create partition names has been
completely removed. Hence kpartx is no longer even an optionally used
package by gparted.
This change is related to the following bug report:
Ubuntu launchpad bug 719129 - [Natty] Gparted duplicates dmraid
partition devices
https://bugs.launchpad.net/ubuntu/+source/gparted/+bug/719129
The reason for refactoring is to simplify the large GParted_Core
class, to help minimize disk reads, and to group the logic for
processing the file /proc/partitions into a single logical class.
This reason for refactoring is to simplify the large GParted_Core
class, to help minimize disk reads, and to group the logic for
processing the file /proc/partitions into a single logical class.
This adds initial handlers for Btrfs; only .create, .check and
.read_label are done for now, via external btrfs-tools.
Other methods are still only stubs.
Newer versions (dmraid-1.0.0-rc16?) of dmraid default to always
creating partition names by inserting the letter 'p' between the
device name and the partition number. Since this is not
consistent with older versions of dmraid, add extra logic to
ensure that newer versions of dmraid do not insert this extra
letter 'p'.
Rename method get_udev_name to get_udev_dm_name and enhance to
retrieve the property DM_NAME.
Handle situation where parted, and hence libparted, has been
configured with --disable-device-mapper. In this situation on
some distros the device name could be /dev/dm-0. This results in
invalid partition names such as /dev/dm-0p1. Add logic to decode
the actual /dev/mapper name.
Make align to MiB the default setting instead of align to cylinder.
Migrate logic for alignment to cylinder into its own method
snap_to_cylinder, and place common logic in snap_to_alignment.
Add alignment checks for situations where space is needed for Master
Boot Record or Extended Boot Record.
Adjust ranges on spin buttons according to required boot record space.
Copy fix for off by one sector (#596552) from
Dialog_Partition_New::Get_New_Partition to
Dialog_Base_Partition::Get_New_Partition
Enhance resize / move logic for checking locations of nearby logical
partitions to not depend on the partition ordering.
Note: This commit does not include limiting graphic movement according
to required boot record space.
Also add signal handler to alignment menu to update file system
minimum size.
This enhancement is to prepare for adding a third alignment
option to align to MiB.
With the removal of the 512 byte constants, such as MEBIBYTE, it
was possible to rename the _FACTOR constants back to BYTE
constants. The _FACTOR constants, such as MEBI_FACTOR, were a
temporary measure to help in the transition to support devices
with sector sizes > 512 bytes.
The device sector size is needed in all calculations that convert
between sectors and bytes. The device sector_size is included in
the partition object because this object is used to contain
operation information in addition to actual partitions and
unallocated space. A second option was considered to pass the
device object to many methods, but this was considered a much
larger task that might not provide significant gains in
maintainability.
According to parted documentation, only "msdos" and "dvh" disk
types (or partition table types) support extended partitions.
All other disk types support primary partitions only.
Remove commented code and boolean use-C-lang parameter for
Utils::num_to_str() method because this bug was fixed in
gcc-4.0.3. The GNU gcc compiler versions 4 and up are now
commonly in use. Also due to previous partial commenting and
removal of the code, the code was non-functional
Thanks goes to Jan Claeys for pointing out this clean up
opportunity.
Restore copyright entries by original author to those of his last
known repository commit titled "released gparted-0.3.4 on
LarryT's request." on Feb 25, 2007.
Add my own copyright entries for files in which I changed source
code. Files in which I only made spelling changes do not have my
copyright entry added.
Auto detection of Linux software RAID devices was lost in GParted
0.3.8. This was because device scanning by the libparted device
call ped_device_probe_all() was replaced with custom code within
GParted to scan /proc/partitions for devices.
The reason the libparted call was replaced was due to a long
scanning problem with ped_device_probe_all(), a non-existent
physical floppy device, and a BIOS setting indicating a floppy
drive existed. See bug #351753:
https://bugzilla.gnome.org/show_bug.cgi?id=351753
Improve the feedback to the user when creating or pasting a
partition on a device with no partition table found.
Prior to this enhancement if a user tried to create or paste a
partition onto a device with no partition table found, GParted
would present the user with a Create Partition Table dialog.
When creating a new partition this could cause confusion for
users who were trying to format the disk. The user could
mistakenly believe the choice of an MS-DOS file system was being
presented.
Similarly on a paste operation it could be confusing to be
presented with a dialog to create a partition table without any
explanation of why a partition table was suddenly required in the
midst of the paste operation.
Neither the new partition creation, nor the partition paste
actions were performed after the Create Partition Table dialog
was displayed.
It appears that different dmraid versions handle specifying a
single dmraid device differently.
dmraid-1.0.0.rc14 uses a partial name only,
such as "isw" or "isw_cjbdddajhi".
dmriad-1.0.0.rc15 uses a full name only,
such as "isw_cjbdddajhi_Vol0".
To maintain compatibility with the broadest range of dmraid versions,
the ability to specify a single dmraid device is being removed.
Some distros appear to display /dev/dm-# device names with
libparted. Since this fails a pattern match with the dmraid
device name, check with udev to see if a pattern match is
possible with the name returned from udevinfo or udevadm info.
For example:
/dev/mapper/isw_cjbdddajhi_Vol0 is the device name
/dev/dm-0 is a symbolic link pointing to the above device name
Normally, the blkid command will detect the UUID for a file system.
In cases where blkid fails to detect the UUID and the vol_id command
is available, then try using the vol_id command.
- Changed title Features to File System Support.
- Renamed button Refresh to Rescan Support.
- Created expander for legend and added narrative.
- Removed columns detect and read.
svn path=/trunk/; revision=966
* include/Device.h,
include/Dialog_Base_Partition.h,
src/Dialog_Base_Partition.cc: replaced 'long' with 'Sector' to
prefent overflows with really large devices.
* include/Makefile.am,
include/Operation.h,
include/Win_GParted.h,
src/GParted_Core.cc,
src/Makefile.am,
src/Win_GParted.cc,
include/OperationCheck.h (new),
src/OperationCheck.cc (new): added 'check' operation. The
functionality was already there, but it was not possible yet to
activate it from the gui.
* added support for reading volumelabels. Atm we only read ext2/3, but
the infrastructure for adding the other filesystems is in place.
It's simply a matter of finding the right commands and parsing the
output. (see #338528 for more info)
* src/Dialog_Progress.cc: make sure progressfraction stays between 0.0
and 1.0
* include/GParted_Core.h,
src/GParted_Core.cc: implemented rollback in case of failed move of
overlapping filesystems. Together with the readonly test moving
should be quite save now :)
* include/Dialog_Progress.h,
src/Dialog_Progress.cc: Show number of warnings after all operations
are completed. Also urge people to save their details in case of
error.
* include/GParted_Core.h,
src/GParted_Core.cc: declared char * buf global, so it can be
initialized in copy_blocks(). This is a lot more efficient than
initializing it on every copy_block()
* include/Partition.h,
src/Partition.cc: added test_overlap()
* include/GParted_Core.h,
src/GParted_Core.cc: perform a readonly testrun before the actual
move if destination overlaps source.
* include/GParted_Core.h,
src/GParted_Core.cc: update ntfsbootsector after first sector has
changed. This is necessary to let windows boot correctly afterwards.
* src/ntfs.cc: added FIXME
* include/GParted_Core.h,
src/GParted_Core.cc: tried to fix a couple of errors with moving to
the right with overlap (thanks Larry for hunting ;) )
Although everything seems to work well i'm still not sure if
everything is 100% ok.
I guess everything could use some more testing, which is exactly
what i plan to do this weekend :)
* happy 24th birthday Johannes! :^)
* include/GParted_Core.h,
src/GParted_Core.cc: restructured resize_move() to be more robust.
This will hopefully tackle a couple of issues which came up during
the public testing.
* include/Utils.h,
src/Utils.cc: added format_time()
* include/OperationDetail.h,
src/OperationDetail.cc: keep track of elapsed time between
STATUS_EXECUTE and STATUS_[ERROR|SUCCES]
* include/Dialog_Progress.h,
src/Dialog_Progress.cc: show elapsed time in the details per (sub)
process
* src/GParted_Core.cc: use Utils::format_time()
* include/GParted_Core.h,
src/GParted_Core.cc: fixed some issues with combi move+shrink on
fat* and hfs* filesystems.
Also call wait_for_node() from commit() if 'node' was provided.
* include/GParted_Core.h,
src/GParted_Core.cc: created set_progress_info() (i actually planned
on adding some time remaining stuff, but xfiles is waiting ;) )
* include/GParted_Core.h,
src/GParted_Core.cc: did some work on disabling of automounting of
removable drives. The current method is not entirely to my liking
but it seems to work.
* implemented some stuff to find a good blocksize to use for
copy/move. Actually i'm not really happy with it, because probing
seems suboptimal, but it's better than nothing. As soon as i have
some time i should do some research on the subject to find a better
solution.
* include/Win_GParted.h,
src/Win_GParted.cc: construct operations in the activate*()
functions instead of in Add_Operation(). This approach allows for
more customization of operations.
* improved errorhandling a bit. At the initialscan we store
errors/warnings now in a list per partition and show the in the
partitioninfo dialog.
While executing an operation we collect all libparted exceptions in
a list and attach this list to the operationdetails when everything
is done.
* include/FileSystem.h,
include/GParted_Core.h,
src/FileSystem.cc,
src/GParted_Core.cc,
src/ext2.cc,
src/ext3.cc,
src/ntfs.cc,
src/reiserfs.cc: removed cylindersize buffering during resize from
the filesystems. It is not needed anymore now we calculate the new
position before calling this.
Also added some extra progressfeedback in the core
* src/Win_GParted.cc: added FIXME:
* include/GParted_Core.h,
src/GParted_Core.cc,
src/fat32.cc: decoupled libparted partition and filesystemresizing.
This resulted in a much more consistent core. This also affected
several other aspects of resizing/moving in a positive way.
* include/GParted_Core.h,
src/GParted_Core.cc,
src/Win_GParted.cc: perform some checks before adding a new
operation to the list.
* src/Partition.cc: made get_length() a bit safer
* include/Dialog_Progress.h,
include/Operation.h,
src/Dialog_Progress.cc,
src/GParted_Core.cc: show warning in progressfeedback if a certain
action is n/a. Of course we only allow these actions if the results
are non-lethal.
* src/Win_GParted.cc,
include/GParted_Core.h,
src/GParted_Core.cc: implemented snap to cylinder algorithm.
Although the algorithm is very simple, it seems to work perfectly.
However, some additional testing is required.
* include/GParted_Core.h,
src/GParted_Core.cc,
src/ext2.cc: added movesupport, atm in experimental state and needs
lots of cleaning. only enabled for ext2, but should work for all
filesystems.
* src/DialogFeatures.cc: added alternating rowcolours (see #342682)
* include/Dialog_Partition_Copy.h,
include/GParted_Core.h,
include/OperationCopy.h,
include/Win_GParted.h,
src/Dialog_Partition_Copy.cc,
src/GParted_Core.cc,
src/OperationCopy.cc,
src/Win_GParted.cc: made blocksize settable by the user.
* Use ped_device_read and ped_device_write instead of 'dd' to copy
filesystems.
Modified progressdetails to provide more detailed feedback about a
process.
Basicly these were all changes to the infrastructure to make the
incorporation of the 'move-code' a bit easier.
( sorry, not in the mood to list all affected files ;)
* src/DialogManageFlags.cc: disabled resizing of this dialog
* include/DialogFeatures.h,
include/Makefile.am,
include/Win_GParted.h,
src/DialogFeatures.cc,
src/Makefile.am,
src/Win_GParted.cc: renamed 'Filesystems' to 'Features' in the
featuredialog to better reflect the actual functionality
* include/Dialog_Filesystems.h,
src/Dialog_Filesystems.cc: removed
* include/GParted_Core.h,
src/GParted_Core.cc: improved disabling of automounting. It's still
somewhat crude, but right now it's ok for some semi-public testing.
I'll do some cleanups tomorrow morning.
* src/Dialog_Progress.cc: added FIXME
* include/GParted_Core.h,
src/GParted_Core.cc: an initial solution for the automount problem.
I still need to add something to prevent just created partitions from
getting mounted. (see #324220 for more info)
* include/Partition.h,
src/Partition.cc: added set_used() and operator!=
* src/Dialog_Partition_Copy.cc,
src/GParted_Core.cc,
src/OperationCopy.cc,
src/Win_GParted.cc: it's now possible to copy from partition to
partition. (before this it was only possible to copy to unallocated
space)
* include/TreeView_Detail.h,
src/TreeView_Detail.cc: made icon behaviour more intelligent
* src/GParted_Core.cc: small improvement in open_device_and_disk()
* include/DrawingAreaVisualDisk.h,
src/DrawingAreaVisualDisk.cc: fixed a few issues with
selecting/activating partitions.
* include/Utils.h,
src/Utils.cc,
src/Dialog_Disklabel.cc,
src/Dialog_Partition_Info.cc (mk_label): improved support for
aligment.
* src/Win_GParted.cc: fixed a small alignmentissue in the devices
submenu.
* include/DrawingAreaVisualDisk.h,
src/DrawingAreaVisualDisk.cc: another change to highlighting of
selected partition.
* include/Partition.h,
src/Win_GParted.cc: deal properly with just formatted partitions
* src/Operation.cc: added FIXME
* changed the way devices and partitions store their devicepaths.
Instead of holding a 'realpath' and a symbolic path we store paths
in a list. This allows for improved detection of mountpoins, free
space, etc..
Also fixed a nasty bug which showed up when you copy a partition
from one device to another. (thanks to mario for the report)
* include/DrawingAreaVisualDisk.h,
include/Makefile.am,
include/Win_GParted.h
src/DrawingAreaVisualDisk.cc,
src/Makefile.am
src/Win_GParted.cc: removed the frame from the visualdiskwidget and
changed some visual details. Also changed visual representation of
selected partition. The latter might be considered as a work in
progress.
* include/FrameVisualDisk.h,
src/FrameVisualDisk.cc: Removed.
* include/GParted_Core.h,
include/TreeView_Detail.h,
src/GParted_Core.cc,
src/TreeView_Detail.cc: show greyed-out mountpoint of unmounted
partitions in the treeview as an improved way to identify
partitions. (#333027)
* src/Win_GParted.cc: cleanups
* include/FrameVisualDisk.h,
src/FrameVisualDisk.cc: improved the algorithm to deal with lost
pixels after seeing some problems with rather insane
partitiontables.
* src/Dialog_Partition_Info.cc: minor cleanup
* src/GParted_Core.cc: show error in partitioninfo if statvfs fails
* src/TreeView_Detail.cc: added FIXME
* include/Frame_Resizer_Base.h,
include/Frame_Resizer_Extended.h,
src/Dialog_Base_Partition.cc,
src/Dialog_Partition_Copy.cc,
src/Dialog_Partition_New.cc,
src/Dialog_Partition_Resize_Move.cc,
src/Frame_Resizer_Base.cc,
src/Frame_Resizer_Extended.cc: did lots of work on the resizer, it's
behaviour should be more natural and satisfying now. (see also
#331591)
* src/Win_GParted.cc: extended partition was resizable even when it's
busy. fixed.
* src/ntfs.cc: made scan output more readable.
* src/FrameVisualDisk.cc: added FIXME
* include/GParted_Core.h,
src/GParted_Core.cc: catch libparted exceptions and display them in
the operationdetails if an operation has failed.
* src/Dialog_Progress.cc: small cosmetic change to the errordialog.
* in some places i still used MiB's instead of sectors to store sizes.
this has been fixed everywhere. Only the spinbuttons still use
MiB's. I have a few ideas on how to solve this, but i'll take it up
with #usability first.
* src/FrameVisualDisk.cc: prevent crasher when visual_disks is empty.
* include/Win_GParted.h,
src/Win_GParted.cc: load devices at startup on signal_show instead
of dispatching it from the c'tor.
Also did some cleanups in the behaviour of opening and closing of
the operationslist.
* include/GParted_Core.h,
src/GParted_Core.cc,
src/Win_GParted.cc: deal with the rare situation when 2 partitions
are mounted on the same mountpoint. (see also #330327)
* include/GParted_Core.h,
include/Partition.h,
src/Dialog_Partition_Info.cc,
src/GParted_Core.cc,
src/Partition.cc,
src/TreeView_Detail.cc: store flags in a list instead of a string.
* Makefile.am,
src/Makefile.am: cleanups
* include/GParted_Core.h,
include/Partition.h,
src/Dialog_Partition_Info.cc,
src/GParted_Core.cc,
src/Partition.cc,
src/TreeView_Detail.cc,
src/Win_GParted.cc: support partitions with multiple mountpoints
(see also #330327)
* wrap mount/umount/swapon/swapoff instead of implementing it
ourselves (#330641)
* moved execute_command() to Utils and made the filesystems use it. All
in all this decreased the size of the binary with 10% and made stuff
more readable.
* include/Win_GParted.h,
src/Win_GParted.cc: it shouldn't be possible to remove an extended
partition which contains logicals.
* src/TreeView_Detail.cc: only show mountpoint column when there is
mountinfo.
* src/Win_GParted.cc: removed warning about busy device. It's not
really needed and it confuses people.
* include/Operation.h: set default status of operationdetails to NONE
* include/Dialog_Progress.h,
src/Dialog_Progress.cc: implemented export of operationdetails to
external file. This can be very usefull for debugging. (#329968)
* include/TreeView_Detail.h,
src/TreeView_Detail.cc: added mountpointcolumn (#304688)
* include/Win_GParted.h,
src/Win_GParted.cc: added submenu 'Devices' which allows one to
select devices from the menu (#329415)
* use Glib::get_tmp_dir() instead of hardcoding it as '/tmp'
* use Glib::find_program_in_path() instead af a system/which combi
* display current device in windowtitle
* correct partitiontype of destination is now set while copying
* resizing now return correct status (sometimes it would report
succes even when some of the suboperationes failed)
* fixed some issues with resizing and cylindersizes.
* removed Execute_Command() and replaced it by execute_command().
The latter uses Glib::spawn_sync instead of popen().
also made the filesystems call execute_command rather than calling
Glib::spawn_sync themselves.
* implemented Utils::sector_to_unit() and use it in several places
* (finally) fixed errors with ntfsresizing (had a lot to do with
difference between MB and MiB)
* resizing of reiserfs now shows more detailed feedback
* support for TebiByte (TiB) unit
* added detailed progressfeedback. It still needs some polishing, but
is already far better then the old situation. And what's more, it's
finally threadsafe :p
* include/Win_GParted.h,
src/Win_GParted.cc: added visual feedback when unmounting or
deactivating swap. This can be usefull when it takes longer then
usual.
* src/Dialog_Partition_Info.cc: removed separator in accordance to the
HIG
* include/Win_GParted.h,
src/Win_GParted.cc: it's now possible to deactivate swap from within
gparted.
* src/GParted_Core.cc: sleep one second after deletion of a partition to
give the kernel some time to reread the partitiontable.
* include/Device.h,
src/Device.cc: replaced 'device_partitions' with 'partitions'
* src/Win_GParted.cc: use new Device::partitions
* include/Partition.h,
src/Partition.cc: added 'realpath'
* src/Dialog_Partition_Info.cc: use Partition::realpath..
* include/GParted_Core.h,
src/GParted_Core.cc:use ped_partition_get_path() instead of
constructing it ourselves. (#325800)
Also use global maps for mountpoints and shortpaths to prevent
fileaccess from happening more then once per scan.
* include/Partition.h,
src/Partition.cc: added get_length()
* include/Utils.h,
src/Utils.cc,
src/Dialog_Partition_Info.cc,
src/Operation.cc,
src/TreeView_Detail.cc,
src/VBox_VisualDisk.cc,
src/Win_GParted.cc: from now on values >=1024MB are displayed in
GB's (#319840)
* happy new year ;)
* src/TreeView_Detail.cc: fixed some alignment issues
* include/GParted_Core.h,
src/GParted_Core.cc,
include/Operation.h,
src/Operation.cc,
include/Win_GParted.h,
src/Win_GParted.cc: removed confirmationdialogs for delete and
convert partitions (#319841).
Also renamed 'convert' to 'format' to reflect the actual
functionality.
* include/Win_GParted.h,
src/Win_GParted.cc: replaced deprecated OptionMenu with ComboBox.
also fixed some issues which arised when no devices were detected.
* include/Partition.h,
src/Partition.cc: overloaded operator ==
* include/VBox_VisualDisk.h,
src/VBox_VisualDisk.cc: rewrote the graphical partitiondisplay. It
now supports resizing and the extended partition is also selectable.
see also #312656
* include/Win_GParted.h,
src/Win_GParted.cc: use the new graphical partitiondisplay.
* src/TreeView_Detail.cc: minor cleanups
* include/Utils.h,
src/Utils.cc: added get_color_as_pixbuf() to create colored squares
of custom sizes. These can be use troughout the app to represent
filesystems. e.g. in the treeview and convertmenu.
* include/TreeView_Detail.h,
src/TreeView_Detail.cc,
include/VBox_VisualDisk.h,
src/VBox_VisualDisk.cc,
include/Win_GParted.h,
src/Win_GParted.cc: use Utils::get_color_as_pixbuf() instead of
custom drawn widgets.
* include/Utils.h,
src/Utils.cc: added mount() and unmount()
* src/Win_GParted.cc,
src/jfs.cc,
src/xfs.cc: use Utils::mount and Utils::umount instead of wrapping
CLI tools.
* include/GParted_Core.h,
src/GParted_Core.cc: did some cleanups
* include/Operation.h,
src/Operation.cc: added get_index_extended to get the ext_index in a
uniform way instead of calculating it every time ourselves.
* replaced the inline Utils functions with static functions.
This shaves a few kbytes (24 in fact) off the binary and is a bit
cleaner code-wise (imho).
* include/Partition.h,
src/Partition.cc: added 'Glib::ustring mountpoint'
* include/GParted_Core.h,
src/GParted_Core.cc: implemented set_mountpoints() to set mountpoint
in partitions.
* include/Dialog_Partition_Info.h,
src/Dialog_Partition_Info.cc: use Partition::mountpoint instead of
finding it ourselves.
* include/Partition.h,
src/Partition.cc: from now on each partition has a reference to it's
device.
* src/Win_GParted.cc,
src/Dialog_Partition_New.cc: make use of new Set() from partition
* include/GParted_Core.h,
src/GParted_Core.cc: since ped_file_system_clobber() ignored reiser4
i've implemented a custom 'filesystem signature remover'.
Also made use of the fact a partition now knows on which device it
lives.
* src/Operation.cc: the get_string() didn't use
Get_Filesystem_String() and thus returned faulty strings. Also did
some cleanups.
* include/GParted_Core.h,
src/GParted_Core.cc: implemented a 'wait_for_node()' function after
reading http://bugs.gentoo.org/show_bug.cgi?id=102343. I couldn't
reproduce the bug myself, but i hope this wil solve it.
Also made 'set_partition_type()' return a boolean for improved
errorchecking.
* hmmz, lots of shimmery internals..
Instead of using a boolean to indicate support for certain
features i now use and enum (NONE, LIBPARTED, EXTENDED).
This allowed me to clean up some stuff that annoyed me ;)
Still.. the core could use a bit more love...
* include/Makefile.am,
include/Win_GParted.h,
src/Makefile.am: removed Dialog_About.[h,cc]
* src/Win_GParted.cc: from now on we use Gtk::AboutDialog instead of
our own AboutDialog. Also use Gtk::Stock items instead of hardcoded
paths to images (about and harddisk).
* include/FileSystem.h: cleanups
* include/GParted_Core.h,
src/GParted_Core.cc: correct partitiontype is now set after creation
or conversion. (#322281)
* removed INSTALL
* compose/.cvsignore,
compose/Makefile.am,
Makefile.am,
configure.in,
include/Makefile.am: some fixes to make 'make dist' work (thanks to Daniel Holbach)
* src/Dialog_Filesystems.cc: fixed a11y thingy (#316108)
* include/GParted_Core.h,
src/GParted_Core.cc,
include/Dialog_Disklabel.h,
src/Dialog_Disklabel.cc,
src/Win_GParted.cc : get labeltypes from libparted instead of hardcoding them,
also changed some text (#315979)
* compose/ucompose.hpp: quick 'fix' for crashers in some locales (#157871)
* include/Utils.h: basicly the same + minor cleanups
* src/GParted_Core.cc: replaced C-style cast with static_cast..
* include/Win_GParted.h,
src/Win_GParted.cc: Replaced menu "Operations" with "Device" and "Partition". Also implemented a 'set-disklabel feature'.
* src/Dialog_Disklabel.cc: changed title and header to be more generic (was specific for a new disk).
* include/Frame_Resizer_Base.h,
include/Frame_Resizer_Extended.h,
src/Frame_Resizer_Base.cc,
src/Frame_Resizer_Extended.cc: finally got around to fix this annoying 'flickering' while using the resizer :)
* include/Dialog_Base_Partition.h,
src/Dialog_Base_Partition.cc,
src/Dialog_Partition_Copy.cc,
src/Dialog_Partition_Resize_Move.cc: Fixed bug in copy functionality (due to unset ORIG_START startsector wasn't set correctly). Also have ORIG*
initialized in ctor of dialogbase to prevent such errors from ever happening again (this one only showed up with gcc-3.3.5) .
* include/Utils.h: used static_cast<> instead of C-style type conversion.
* src/Makefile.am: install gparted binary in bin/ instead of sbin/ (as soon as i've time i want to implement a read-only modus)
* include/Win_GParted.h,
src/Win_GParted.cc: Added menu 'Operations' to menubar. This menu is a duplicate of the popupmenu and imho a bit unnecessary, but lots of
people requested this.. :) Besides this, i removed 'menu_devices' and performed a few other cleanups.
* Added support for reiser4 (only creation atm, since the other functionality appears to be non-free software :/ )
Also, libparted isn't able to detect reiser4 yet, a patch to fix this is underway, but i should probably add reiser4 detection to gparted as well.
* The Filesystemclasses: Changed 'bool Create( const Glib::ustring & device_path, const Partition & new_partition )'
to 'bool Create( const Partition & new_partition )'. Since i now use external tools for all filesystems, the partitionpath will suffice.
* include/GParted_Core.h,
src/GParted_Core.cc,
src/linux_swap.cc: fixed some issues with linux-swap. From now on you need 'mkswap' to create/resize/move linux-swap.
* include/Device.h,
src/Device.cc,
src/GParted_Core.cc,
src/Win_GParted.cc: Removed the ugly Get_Highest_Logical_Busy() from Device and added a classvariable instead. This one is set in
GParted_Core and used wherever needed. I also removed Device::busy, and used the new variable to check if a device is busy.
* Added cylsize to Device and made Operation contain a Device instead of only the path and lenght.
This way i was able to dump Get_Cyl_Size in the Core. Besides that, i used cylsize in WinGparted and made a lot of
cosmetic changes. Most of them were pretty useless, but hey, i'm bored ;)
* src/GParted_Core.cc,
src/Win_GParted.cc,
include/Utils.h,
include/GParted_Core.h: moved inline Get_FS from Utils.h to GParted_Core, saves a few K in exe size ;)
* include/Dialog_Filesystems.h,
src/Dialog_Filesystems.cc: Replaced treestore with liststore. I decided i didn't need a treeview after all...
* src/Dialog_About.cc: Replaced "Gnome Partition Editor based on libparted" with "Gnome Partition Editor"
* src/xfs.cc: fixed small error with creation of xfs filesystems (adrighem)
* include/GParted_Core.h,
src/GParted_Core.cc: Removed 'deep_scan' flag. From now on all scans are 'deep scans'.
* include/Win_GParted.h,
src/Win_GParted.cc: Gui is now loaded before anything else. (#161054)
* Added dialog (accessable from 'gparted' menu) which shows supported operations for the various filesystems.
I plan to put some more info in it, like what is missing etc..
* Refined checks for functionality a bit. e.g. even if a filesystem can't be read, it's still possible to grow it
(but shrinking gets disabled). Also removed that stupid grow_only flag from Utils.h and reordered Win_GParted::Set_Valid_Operations()
* added support for jfs (create, copy, grow) and hfs (create, copy)
* fixed a bug in copying xfs filesystems.
* fixed a number of small bugs/annoying issues.
* Added support for xfs. this means creating and growing xfs filesystems. Shrinking requires some hacking with dump_xfs etc..
i'll add that at a later point. :)
* Replaced boolean 'resize' with 'shrink' and 'grow'. It seems some filesystems only support growing (e.g. xfs) so i need
two flags to control the behaviour of the filesystemclasses.
* include/GParted_Core.h,
src/GParted_Core.cc: modified layoutscan a bit for improved handling of metadata.
* include/Operation.h,
src/Operation.cc: modified Insert_Unallocated() to prevent potential crasher.
* added MIN and MAX to filesystemstruct to set min. and max sizes of a filesystem. So instead of checking per filesystem
i now simply check the fs.MIN or fs.MAX. this results in less and cleaner code. Also this will come in handy when adding
support for new filesystems. (This also fixed several minor bugs with filesystemsizes and gained some improvement in resizer
performance)
* include/FileSystem.h,
src/FileSystem.cc: Execute_Command() now returns exit status of executed command
* the filesystemclasses: returnvalue (bool) is now set according to the return status of the command
* Every devicescan now tests on beforehand if the kernel is able to reread the partitiontable. If the kernel is unable to do
this, i disallow most operations. This may seem weird and even a bad thing to do, but the fact is it protects
the innocent user from a lot of potential damage. Till the linuxkernel is able to reread partitiontables no matter what, this seems
to be the best option. Of course a dialog with information will popup whenever such a situation is encountered.
In a next release i might consider adding an 'advanced mode' for users who know what they're doing.
* Harddisks without disklabel are now properly initizalized and shown in the menu. When one tries to create a new partition on
such a disk a dialog pops up with some blabla about disklabels and offers to create a disklabel. sweet :P (special thanks to mantiena-baltix
for bringing this issue to my attention)
* fixed minor annoyance with refreshing detailed deviceinfo after a 'deep refresh'
* include/Utils.h,
src/GParted_Core.cc,
src/Partition.cc,
src/TreeView_Detail.cc,
src/VBox_VisualDisk.cc: marked some strings for translation ('unknown', 'used', 'unused') and replaced lowercase 'unallocated' with '---'.
* include/GParted_Core.h,
src/GParted_Core.cc: fixed nasty error with resizing 'fixed-start filesystems'.
* src/Partition.cc: added a check to prevent unused space from being bigger then total space.
* src/ntfs.cc: removed -Q from mkntfs. -Q bypassed some safetychecks to gain performance and (so i heard later) also had a
tendency of failing ;) (Adrighem)
* include/GParted_Core.h,
src/GParted_Core.cc,
src/Makefile.am,
include/ntfs.h,
src/ntfs.cc: added full ntfs support. (couldn't test it very will due to the absence of a win32 box :P )
* Again way too many chances to create a detailed entry (i'm glad i'm the only dev atm :P ).
Resizing of ext2/3 works perfect now. I've even tested it on the partition holding my SG seasons =)
Implemented checking of filesystems (only internally used atm).
Done some overall tweaking, finetuning etc.. release 0.0.7 is getting shape.
* include/Device.h,
src/Device.cc: Removed bool Get_Any_Busy() in favor of public bool busy which is set in gparted_core.
This also fixed a small bug with incorrect mountdetection of logical partitions.
Also added a Reset() function to properly reset the contents of a device. to zero/empty .
* include/GParted_Core.h,
src/GParted_Core.cc: 'busyness' of a device is now determined in get_devices().
Renamed get_partitions() to set_device_partitions to reflect its proper function.
When a new partition is created to contain a copied filesystem the size is now properly set. This fixes
a very annoying bug which no one knew about except for me =) .
* src/Win_GParted.cc: use boolean busy from device instead of Get_Any_Busy() .
* Rewrote a large part of gparteds internal code. Filesystemssupport is now much more separated from the rest of gparted and
adding support for other filesystems should be a piece of cake now (hope that's true :P)
It still needs a lot of love, but the foundations are laid =)
* include/Operation.h,
src/Operation.cc: make use of reference arguments instead of return values in some functions.
Also fixed a small bug with deletion of a virtual (new) logical partition.
* include/VBox_VisualDisk.h,
src/VBox_VisualDisk.cc: logical filesystems weren't shown in the legend, fixed.
* src/Frame_Resizer_Base.cc: fixed small bug with custom cursors.
* src/TreeView_Detail.cc: removed obsolete, already commented code.
* src/Win_GParted.cc: make use of reference arguments instead of return values in some functions. (see Operation)
* instead of listing all partition in one list, logical partitions are now stored in a sublist in extended partition object.
This makes partitionhandling in gparted more natural and transparant. It also allowed me to clean up this ugly Operation class ;)
* configure.in: added checks for libuuid and libdl. Also refined libparted check a bit.
* include/Partition.h,
src/Partition.cc: removed Get_Color()
* include/Utils.h: added inline Glib::ustring Get_Color( const Glib::ustring & filesystem )
* src/Dialog_Partition_New.cc,
src/Win_GParted.cc: make use of Get_Color from Utils.h
* src/Device.cc: fixed a crasher with (at least) pl_PL locale.
* include/Dialog_Partition_Resize_Move.h,
src/Dialog_Partition_Resize_Move.cc: fixed some bugs with minimum size of resizable partition + some codecleanups.
* include/Win_GParted.h,
src/Win_GParted.cc: First load gui and then scan devices, this resulted in way faster startup and is more satisfactory (imho)
Also did some minor code cleanups and rearranged some functions needed for applying operations.
* src/Dialog_Progress.cc: few minor code cleanups.
* include/Operation.h,
src/Operation.h: minor (code) change in displaying errormessage. Made Apply_Resize_Move_Extended_To_Visual() a bit more
readable (and thus debugable). This whole class could still use a soft, caring hand though :P
* src/Device.cc: Unallocate space < 1MB wasn't filtered out. fixed.
* src/Partition.cc (Set_Used): Unused wasn't set properly. fixed.
* include/Device.h,
src/Device.cc: made 'deep-scan' optional in Read_Disk_Layout. Removed obsolete (already) commented function.
* include/Partition.h,
src/Partition.cc: Took used sectors out of Set() and added a Set_Used() function instead. Also added Reset() .
* src/Dialog_Partition_New.cc: minor change to make use of the new Set() in Partition..
* include/Win_GParted.h,
src/Win_GParted.cc: show pulsing progressbar while refreshing devices.
Mike Fleetwood