Fix to make mkfs.f2fs properly handle labels longer than 16 characters
was included in f2fs-tools 1.2.0 [1]. The oldest supported
distributions now include this release:
Distro EOL f2fs-tools
- Debian 8 2020-Jun 1.4.0
- RHEL / CentOS 7 2024-Jun 1.4.1
- SLES 12 2027-Oct Unknown
- Ubuntu 14.04 LTS 2019-Apr 1.2.0
Note that on Ubuntu 14.04 LTS blkid from util-linux 2.20.1 is too old to
recognise F2FS file systems, as 2.23 is required for F2FS support [2].
mkfs.f2fs claims the maximum label length is less than 512 characters,
but actually accepts 512 characters.
# label=`head -c 1024 < /dev/zero | tr '\0' 'A'`
# mkfs.f2fs -l `echo -n "$label" | cut -c1-513` /dev/sdb10
F2FS-tools: mkfs.f2fs Ver: 1.4.0 (2014-09-18)
Error: Volume Label should be less than 512 characters
Usage: mkfs.f2fs [options] device [sectors]
[options]:
-a heap-based allocation [default:1]
-d debug level [default:0]
-e [extension list] e.g. "mp3,gif,mov"
-l label
-o overprovision ratio [default:5]
-s # of segments per section [default:1]
-z # of sections per zone [default:1]
-t 0: nodiscard, 1: discard [default:1]
sectors: number of sectors. [default: determined by device size]
# echo $?
1
# mkfs.f2fs -l `echo -n "$label" | cut -c1-512` /dev/sdb10
F2FS-tools: mkfs.f2fs Ver: 1.4.0 (2014-09-18)
Info: Label = AAAAAAAAAAAA...[trimmed from 512 "A"s]...AAAAAAAAAAAA
Info: sector size = 512
Info: total sectors = 1048576 (in 512bytes)
Info: zone aligned segment0 blkaddr: 256
Info: Discarding device
Info: This device doesn't support TRIM
Info: format successful
# echo $?
0
# blkid -V
blkid from util-linux 2.25.2 (libblkid 2.25.0, 24-Oct-2014)
# blkid /dev/sdb
/dev/sdb10: LABEL="AAAAAAAAAAAA...[only 127 "A"s]...AAAAAAAAAAAA"
UUID="f47f3fdc-dd91-4616-bb6d-0d643a884265" TYPE="f2fs"
PARTUUID="3bb4bef8-9494-4e82-8dda-5d8edd9c60d9"
As blkid only reports the first 127 characters and is the only command
used for reading the label of an F2FS file system, use this as the new
increased limit.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=9799d6364dc93e1fd259d812d4a50ed984a6456b
mkfs: handle labels longer than 16 characters
[2] https://mirrors.edge.kernel.org/pub/linux/utils/util-linux/v2.23/v2.23-ReleaseNotes
"add Flash-Friendly File System (f2fs) support [Alejandro Martinez
Ruiz]"
Closes!29 - Enhance F2FS support
On CentOS 7 with f2fs-tools 1.4.1, checking an F2FS file system fails
like this:
# fsck.f2fs -f -y -a /dev/sdb3
Info: Force to fix corruption
fsck.f2fs: invalid option -- 'y'
Error: Unknown option ?
Usage: fsck.f2fs [options] device
[options]:
-a check/fix potential corruption, reported by f2fs
-d debug level default:0]
-f check/fix entire partition
-t show directory tree [-d -1]
# echo $?
1
Turns out that the '-y' option was not available until f2fs-tools 1.10.0
and is identical to the existing '-f' option anyway [1], which GParted
already uses. Just remove the '-y' option passed to fsck.f2fs.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=55ee9e7202f84168f868d863da8ed1c4995a0e6d
fsck.f2fs: add -y for generic fsck
Closes!29 - Enhance F2FS support
Before this commit [1] first included in f2fs-tools 1.5.0, dump.f2fs
didn't report the total space used by the file system. This causes F2FS
file system usage not be reported on older distributions, including
RHEL/CentOS 7 and Debian 8.
On CentOS 7:
# rpm -q f2fs-tools
f2fs-tools-1.4.1-2.el7.nux.x86_64
# dump.f2fs -d 1 /dev/sdb3 | egrep 'sector size =|total.*sectors ='
Info: sector size = 512
Info: total sectors = 2097152 (in 512 bytes)
On Fedora 28:
# rpm -q f2fs-tools
f2f2-tools-1.10.0-1.fc28.x86_64
# dump.f2fs -d 1 /dev/sdb2 | egrep -a 'sector size =|total.*sectors ='
Info: sector size = 512
Info: total sectors = 3145728 (1536 MB)
Info: total FS sectors = 2621440 (1280 MB)
"total sectors" reports the size of the partition.
"total FS sectors" reports the size of the file system.
Cope with the file system size being missing. Pass -1 as the file
system size to partition.set_sector_usage() in this case. Note that
this means GParted won't be able to detect and report unallocated space
within the partition when using f2fs-tools < 1.5.0.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=fea6162a6db9af527648262d9fbb0335a0cc5460
fsck.f2fs: show total sectors consumed by filesystem
Closes!29 - Enhance F2FS support
On Fedora 28 with f2fs-tools 1.10.0, dump.f2fs is producing NUL
characters in it's output and this completely breaks the parsing code in
f2fs::set_used_sectors(). Glib::Regex, as used by
Utils::regexp_label(), just doesn't match any text after the first NUL
character from the output.
# dump.f2fs -d 1 /dev/sdb1
Info: Debug level = 1
Info: [/dev/sdb1] Disk Model: VBOX HARDDISK 1.0 ^@^@^@^@^@^@^@^...
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 2097152 (1024 MB)
...
Grep thinks the output is binary too:
# dump.f2fs -d 1 /dev/sdb1 | \
> egrep 'valid_block_count|user_block_count|log_blocksize|sector size =|total FS sectors ='
Binary file (standard input) matches
# dump.f2fs -d 1 /dev/sdb1 | \
> egrep --text 'valid_block_count|user_block_count|log_blocksize|sector size =|total FS sectors ='
Info: sector size = 512
log_blocksize [0x c : 12]
Info: total FS sectors = 2097152 (1024 MB)
user_block_count [0x 36400 : 222208]
valid_block_count [0x 2 : 2]
Re-write set_used_sectors() using string find() and sscanf() to be
similar to how a number of the other set_used_sectors() are written for
other file systems.
Closes!29 - Enhance F2FS support
Now that GParted requires Gtk3 there is no need to use floating point
numbers for compatibility with Gtk <= 2.22. Replace with symbolic
alignment constants.
Relevant commit history:
* 6efa623401
Add optional yalign argument to Utils::mk_label() method
* be2689ad25
Stop using deprecated widget alignment enumerators (#652044)
btrfs-progs 3.12 includes 'btrfs filesystem label /dev/PTN NEWLABEL'
functionality so stop checking for this before enabling setting the
label.
$ btrfs version
Btrfs v3.12
$ btrfs filesystem label --help
usage: btrfs filesystem label [<device>|<mount_point>] [<newlabel>]
Get or change the label of a filesystem
With one argument, get the label of filesystem on <device>.
If <newlabel> is passed, set the filesystem label on <newlabel>.
$ echo $?
0
Worst case scenario is that some how an old version of the btrfs command
is used which doesn't support the labelling functionality. Then this
commit would change GParted from disallowing labelling of a btrfs, to
allowing it, but presumably it would fail with an error from the btrfs
command reporting so. Arguably better from a support point of view.
Closes!26 - Remove support for btrfs-progs < 3.12
This commit [1] from btrfs-progs 3.12 removed the previously deprecated
programs btrfsctl and btrfs-show. As btrfs-progs 3.12 is now the
minimum requirement, remove support for those removed programs.
This commit is just removing the use of btrfs-show as a fallback to read
the label.
Note that 'btrfs-show /dev/PTN' didn't distinguish between a label of
"none" and no label. Hence the logic in btrfs::read_label() to do with
matching the label "none", or matching the label with or without single
quotes. Unfortunately as identified in this commit [2]
'btrfs filesystem show /dev/PTN' is subject to the same issue, but only
when the file system is mounted and only for btrfs-progs 3.12. This was
fixed by this commit [3] from btrfs-progs 3.14.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/kdave/btrfs-progs.git/commit/?id=f243fcd1b2aa55ffadfbcc032c66dedbee56e79e
Removing btrfsctl, btrfs-vol, btrfs-show
[2] eca732fb0c
Update parsing of btrfs filesystem show for the label (#733601)
[3] https://git.kernel.org/pub/scm/linux/kernel/git/kdave/btrfs-progs.git/commit/?id=a156b967ed9bd606afa8dc402451abcf07226c17
btrfs-progs: make filesystem show by label work
Closes!26 - Remove support for btrfs-progs < 3.12
PATCHSET OVERVIEW
The oldest supported distributions have these versions of the Linux
kernel and btrfs-progs:
Distro EOL kernel btrfs-progs
- RHEL / CentOS 7 2024-Jun 3.10.0 4.9.1
- Ubuntu 14.04 LTS 2019-Apr 4.4.0 3.12
- Debian 8 2020-Jun 3.16.0 3.17
- SLES 12 2027-Oct 3.12.28 3.16
Making the oldest supported packages be kernel 3.10 and btrfs-progs 3.12
allows the btrfs support code to be simplified by removing backward
compatibility.
THIS CHANGE
Remove old workaround for ignoring the error when resizing a btrfs to
the same size on Linux kernel < 3.2.
Also now that only exit status 0 is considered successful from btrfs
resize, the EXEC_CHECK_STATUS flag to execute_command() can be used,
rather than having to separately call set_status() afterwards.
Relevant commit history:
* 11d044dba0
Don't ignore any errors resizing btrfs on Linux >= 3.2 (#669389)
* a580abbc30
Use newer btrfs multi-tool control command first
Closes!26 - Remove support for btrfs-progs < 3.12
The title has never been set in this case, and defaulted to the name of
the executable 'gpartedbin'. Fix this.
Closes#44 - Title not set in Resize/Move dialog for extended partitions
'launched' local POD (Plain Old Data) variable was left uninitialised,
but was set in both the try and catch clauses. Best practice is to
initialise when defined, so do that instead. Cosmetic change.
It is not creating a dialog (a pop-up window managed by GParted code
itself). It is launching independent yelp program to display the help,
so remove the "_dialog" from the name to avoid any possible confusion.
Originally, if the yelp command was not installed, attempting to display
help produced an error dialog with this message:
Failed to execute child process "yelp" (No such file or directory)
However since this commit during the Gtk 3 port [1] the error message
became this less useful one:
Operation not supported
Two attempts are made to display the GParted Manual, first using
gtk_show_uri() and second by executing the yelp command directly. Prior
to the aforementioned commit [1] both methods returned the failure
reason using the same 'error' variable. Hence reported the message
"Failed to execute child process "yelp" ..." from the second attempt.
However that commit had to re-code the second method as part of the Gtk
3 port and use a different error returning mechanism, thus the use of
different variable 'e'. But the dialog was left reporting the message
from the original 'error' variable, thus reporting "Operation not
supported" message from the first attempt using gtk_show_uri().
Fix by again displaying the message from the second failure into the
error dialog. Also make it very clear there are two error returning
variables by naming them 'error1' and 'error2_msg'.
[1] 2953778a4c
port-to-gtk3: Use Gdk::AppLaunchContext to launch yelp (#7)
Use of PKG_NAME is deprecated in GNOME 3 and produced this warning:
$ ./autogen.sh
/usr/bin/gnome-autogen.sh
/usr/bin/yelp-build
***Warning*** PKG_NAME is deprecated, you may remove it from autogen.sh
...
Now that GParted is a GNOME 3 application with GNOME 3 yelp-tools
managed documentation this is redundant and can be removed. Previous
further analysis:
GNOME Bugzilla, Bug 743318, comment 18
https://bugzilla.gnome.org/show_bug.cgi?id=743318#c18
"
PKG_NAME is still used in GNOME 2.28's gnome-autogen.sh in error
messages. (GNOME 3's gnome-autogen.sh queries it from configure.ac
instead of requiring it to be set).
"
Also confirmed that it makes no difference by running ./autogen.sh with
and without PKG_NAME being set. The produced GParted build trees were
the same. Therefore the release and executable can't be affected.
GNOME 3's yelp doesn't use scrollkeeper or the OMF catalog, so the
constructed Makefile doesn't use xmllint to validate the scrollkeeper
DTD file. Therefore remove attempted sed edit of that line which no
longer exists in the Makefile.
Note that help/Makefile.am's @YELP_HELP_RULES@ automake macro expansion
comes from /usr/share/aclocal/yelp.m4 [1].
Commit which previously needed to add the sed edit:
cbb25a2511
Stop xmllint scrollkeeper-omf.dtd fetch failure breaking CI tests (#9)
[1] Yelp > Yelp Tools > yelp.m4
http://yelp.io/tools/yelp.m4.htmlCloses!24 - Port to GNOME 3 yelp-tools documentation infrastructure
Update GParted to specify the GParted Manual using the new GNOME 3 way
with the 'help:' prefix to avoid yelp reporting this error:
Document Not Found
The URI 'ghelp:gparted' does not point to a valid page.
Closes!24 - Port to GNOME 3 yelp-tools documentation infrastructure
Now with GNOME 3 style help installed, running 'yelp help:gparted'
results in this error being displayed in yelp:
Page Not Found
The requested page was not found in the document 'help:gparted'.
Where as running 'yelp help:gparted/gparted' correctly displays the
GParted Manual.
Fix by renaming the article tag to the default 'index' that yelp is
expecting when using the new GNOME 3 'help:' prefix.
Closes!24 - Port to GNOME 3 yelp-tools documentation infrastructure
Second part is to use yelp-tools to build and install the documentation.
Have to rename the help Manual from help/C/gparted.xml to
help/C/index.docbook in accordance with this note from the GNOME Goal:
Port to New Documentation Infrastructure [1]:
IMPORTANT: If this is for a DocBook document, the top-level DocBook
file MUST be renamed to index.docbook. Do a "git mv" and include
index.docbook in HELP_FILES.
Commits from gucharmap [4] and totem [5], projects which have DocBook
documentation, making this same change are also useful references.
[1] GNOME Goal: Port To New Documentation Infrastructure
https://wiki.gnome.org/Initiatives/GnomeGoals/NewDocumentationInfrastructure
[2] Yelp > Yelp Tools > yelp.m4
http://yelp.io/tools/yelp.m4.html
[3] GNOME application developement overview / User help / Set up your
build system
https://developer.gnome.org/platform-overview/stable/dev-help-build.html.en
[4] gucharmap commit "Port to new documentation infrastructure"
3e1526c056
[5] totem commit "Use new documentation infrastructure"
59a6bd6064Closes!24 - Port to GNOME 3 yelp-tools documentation infrastructure
Details of old GNOME 2 gnome-doc-utils:
Migrating your documentation to gnome-doc-utils
https://wiki.gnome.org/Projects/GnomeDocUtils/MigrationHowTo
First part is to stop using gnome-doc-utils to build and install the
documentation. Also since updating the OMF catalog was only needed for
GNOME 2 yelp, use of scrollkeeper is completely removed too.
Closes!24 - Port to GNOME 3 yelp-tools documentation infrastructure
I generated this by running:
find ./ -type f -exec sed -i 's/ghelp:fdl/help:fdl/g' {} \;
By updating the translations at the same time, it should be easier on
the translators as there's no reason to invalidate these strings.
https://bugzilla.gnome.org/show_bug.cgi?id=704634#c8
[Mike Fleetwood: Explain the underlying cause and distro versions.]
This gnome-desktop commit, first included in version 3.5.5, switched the
package from using gnome-doc-utils to yelp-tools so changed the
installed location of the GNU FDL license file from
/usr/share/gnome/help/fdl/C/fdl.xml to
/usr/share/help/C/fdl/index.docbook, thus changing the yelp URI from
'ghelp:fdl' to 'help:fdl':
8b7e059e2c
Port to new documentation infrastructure
The oldest supported distributions with Gtk/GNOME 3 all have at least
3.10, therefore use this fix unconditionally.
Distribution EOL Gtk/GNOME 3
RHEL / CentOS 7 2024-Jun 3.22
Ubuntu 14.04 LTS 2019-Apr 3.10
Ubuntu 16.04 LTS 2021-Apr 3.18
Debian 8 2023-Apr 3.14
SLES 12 2027-Oct 3.10
Closes!24 - Port to GNOME 3 yelp-tools documentation infrastructure
The file has been redundant since it was first added [1]. It was never
listed in configure.ac (or configure.in) in AC_CONFIG_FILES. Therefore
autoconf has never produced help/C/Makefile.in and ./configure has never
produced help/C/Makefile. Therefore it isn't used during the build and
install of GParted. Remove it.
[1] 46ca7c74dc
Added code hooks to prepare for GParted Manual
Closes!24 - Port to GNOME 3 yelp-tools documentation infrastructure
These lines in the final configuration report from ./configure were left
behind [1] when determination of the underlying definitions were remove.
So they no longer report 'yes' or 'no' like the other lines in the file
configuration report.
Need partition table re-read workaround? :
Supports large sector sizes (> 512 bytes)? :
Remove them now.
[1] 8df975c7d1
Increase minimum required libparted to 2.2 (!22)
Closes!22 - Increase minimums to libparted 2.2 and glibmm 2.32
According to the GIT history the lines were added by this commit:
8d808c0b62
gparted-0.3.6 - code recreation from Source Forge
Looking at the SVN history this commit actually fleshed out the
implementations of fat16::get_label() and fat32::get_label() and added
the commented #includes:
https://sourceforge.net/p/gparted/svn/118
Added read label support for fat16 and fat32 using mtools mlabel command
2008-02-12
Then this SVN commit moved the mtools temporary file handling code into
Utils.cc, leaving behind the commented #includes:
https://sourceforge.net/p/gparted/svn/124
Added MTools temporary file handling functions
2008-02-19
Finally this commit removed fat32.cc by merging the code with fat16.cc:
519af1a7c0
Combine duplicate code for fat16/32
So remove the left behind commented #includes from fat16.cc.
A forum user had a case where they wanted to grow their in use root,
ext4 file system. GParted supports this, but the partition was a
logical partition inside an extended partition and GParted doesn't
support resizing an extended partition while any contained logical
partitions are busy.
Example layout:
Partition File System Mount Point
/dev/sdb1 ntfs
/dev/sdb2 [busy]
/dev/sdb5 [busy] ext4 /
unallocated unallocated
So just allow extended partitions to be resized online when online
partition resizing is available via libparted.
NOTE:
The block device that the Linux kernel provides for an extended
partition just maps to the first 1 KiB of the extended partition where
the Extended Boot Record is stored, and does not include any of the
contained logical partitions. Therefore no application can care that
the extended partition is resized while a logical partition is in use
because it can't use the extended partition block device to access any
data.
The on disk layout looks like this:
# fdisk -l /dev/sdb
Disk /dev/sdb: 8589 MB, 8589934592 bytes, 16777216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x0007650e
Device Boot Start End Blocks Id System
/dev/sdb1 2048 1050623 524288 7 HPFS/NTFS/exFAT
/dev/sdb2 1050624 2101247 525312 5 Extended
/dev/sdb5 1052672 2101247 524288 83 Linux
# parted /dev/sdb unit s print free
Model: ATA VBOX HARDDISK (scsi)
Disk /dev/sdb: 16777216s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
63s 2047s 1985s Free Space
1 2048s 1050623s 1048576s primary ntfs
2 1050624s 2101247s 1050624s extended
5 1052672s 2101247s 1048576s logical ext4
2101248s 16777215s 14675968s Free Space
The kernel's partition sizes from /sys/block/sdb/sdb${N}/{start,size}
shows extended partition 2 has a size of only 2 sectors:
# for N in 1 2 5
> do
> echo -e "/dev/sdb${N}\tstart=`cat /sys/block/sdb/sdb${N}/start`\tsize=`cat /sys/block/sdb/sdb${N}/size`"
> done
/dev/sdb1 start=2048 size=1048576
/dev/sdb2 start=1050624 size=2
/dev/sdb5 start=1052672 size=1048576
The EBR read from the whole of extended partition 2 block device:
# hexdump -C /dev/sdb2
00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 86 |................|
000001c0 06 41 83 cb 09 82 00 08 00 00 00 00 10 00 00 00 |.A..............|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
00000400
Closes!23 - Enable online resizing of extended partitions
With the Gtk3 port the File System Support dialog has become too wide
because the legend text is no longer wrapped. Set the max-width-chars
property to specify the natural size of the widget in terms of
characters [1]. It is converted to pixels using the average character
width in the current font.
Also use PACK_EXPAND_WIDGET when adding the label to the box so that if
the dialog is resized extra space is used to increase the size of this
child widget [2].
[1] GNOME HowDoI / Labels
https://wiki.gnome.org/HowDoI/Labels
[2] Gtkmm 3.0 Enums and Flags, enum Gtk::PackOptions
"PACK_EXPAND_WIDGET Space is expanded, with extra space filled by
increasing the child widget size."
https://developer.gnome.org/gtkmm/3.0/group__gtkmmEnums.html#ga83727a1b6fed51566dfd5c8e58890dbaCloses#7 - Port to Gtk3
In Gtk2 the up and down buttons in a SpinButton were smaller leaving
space for 7 digits before scrolling the entry. In Gtk3 the up and down
buttons are much larger leaving only space for 4 digits. This occurs in
the SpinButtons in the Dialog_Base_Partition class as displayed in the
New Partition, Paste and Resize/Move dialogs.
Set width-chars property of all Gtk::SpinButtons to ensure 7 digits can
be displayed before scrolling the entry.
Closes#7 - Port to Gtk3
In Gtk3 the progress bar height is fixed and defined by the CSS theme in
use. Changing the widget allocation size does nothing, it is always
rendered the same way.
In many themes, including Adwaita, the progressbar is very, very thin.
Provide custom CSS to specify a height of 8 pixels.
The CSS source string has to be differentiated for Gtk pre and post
3.20, because Gtk 3.20 introduced some breaking changes in the way CSS
is handled.
References:
[1] Migrating from GTK+ 2.x to GTK+ 3 - Parsing of custom resources
https://developer.gnome.org/gtk3/stable/gtk-migrating-GtkStyleContext-parsing.html
[2] Gtk3 Reference Documentation - Changes in GTK+ 3.20
https://developer.gnome.org/gtk3/stable/ch32s10.html
[3] Gnome/HowDoI - Custom Style
https://wiki.gnome.org/HowDoI/CustomStyleCloses#7 - Port to Gtk3
The pulsebar looks very small and needs to be widened. The pulsebar is
packed inside the statusbar so that it displays activity text on the
left side and the pulsebar on the right side. Ideally we want the space
to be evenly divided for the textual messages and for the pulsebar
activity indicator.
For this we just have to set the 'homogeneous' property to TRUE for the
statusbar (note that GtkStatusBar inherits from GtkBox).
Also vertically align the pulsebar to the center of the statusbar. This
is achieved setting the 'valign' property to Gtk::ALIGN_CENTER for the
pulsebar widget.
Closes#7 - Port to Gtk3
There is a bug affecting Gtk+ 3.22.8 to 3.22.30 in which destroying a
GtkComboBox when it is not hidden results in this message:
Gtk-CRITICAL **: gtk_widget_is_drawable: assertion 'GTK_IS_WIDGET (widget)' failed
This happens in GParted when some dialogs are closed, for example the
Create New Partition and Create Partition Table dialogs. To work around
the issue we call Gtk::Dialog::hide() in the destructors of our dialog
classes.
The issue was fixed in Gtk 3.24.0.
* Gtk 3.22.8 was released in February 2017.
* Gtk 3.24.0 was released in September 2018.
References:
[1] Gtk Issue - GtkComboBox::private::popup_window can be NULL
https://gitlab.gnome.org/GNOME/gtk/issues/125
[2] Gtk commit - combobox: popdown() the menu during unmap()
7401794de6
[3] Gtk commit - Check for NULL priv->popup_window in
gtk_combo_box_popdown()
aa5d926c84Closes#7 - Port to Gtk3
There is a bug in Gtkmm3 when setting accelerator keys on a
Gtk::MenuItem, the accelerator keys work but are not displayed when the
menu is drawn. This happens for Gtk::MenuItems, including derived
objects, that are constructed with a non-default constructor.
All non-default constructors of Gtk::MenuItem, and subclasses, work by
creating themselves a Gtk::AccelLabel and packing it inside the menu
item. But in Gtk3 GtkMenuItem are created with a GtkAccelLabel already
packed in as a child and that accel label should be used instead.
To workaround the issue we only use the default constructor for
Gtk::MenuItem and subclasses. This is easy to do because we only have
to change the wrappers in MenuHelpers.cc.
This bug affects Gtkmm version 3.0.0 to 3.22.2 and was fixed in
Gtkmm 3.22.3.
* Gtkmm 3.0.0 was released in April 2011
* Gtkmm 3.22.3 was released in November 2018
References:
[1] Bug Report on the Gtkmm mailing list
https://mail.gnome.org/archives/gtkmm-list/2018-February/msg00006.html
[2] Commit - Gtk::MenuItem: Fix add_accel_label()
e5c8c2df67Closes#7 - Port to Gtk3
Now GParted compiles with Gtkmm3, but we get a failed assertion doing
the following:
* Select a device with more than 1 partition
* Select a partition
* Activate 'Refresh Devices' (or do any operation that causes it, like
mount/unmount etc.)
This is the failed assertion:
**
ERROR:Win_GParted.cc:1152:void GParted::Win_GParted::set_valid_operations(): assertion failed: (valid_display_partition_ptr( selected_partition_ptr ))
Aborted (core dumped)
Where is the problem?
Win_GParted::Refresh_Visual() calls TreeView_Detail::load_partitions()
to clear and refill the treeview.
The problem is in GParted::TreeView_Detail::load_partitions() at
TreeView_Detail.cc:91:
treestore_detail->clear();
This activates TreeView_Detail::on_selection_changed() which in turn
activates Win_GParted::on_partition_selected() passing an old, stale
pointer as an argument. This triggers the failed assertion.
Why does this happen with Gtk3 and not with Gtk2?
First a bit of background of GtkTreeView:
What happens to the selection in a GtkTreeView when the selected row
is removed?
With Gtk2 the selection simply becomes empty, so nothing is selected
afterwards. With Gtk3 this was changed [1] and selection moves to an
adjacent row.
gtk_tree_store_clear() removes rows one by one. While removing rows the
selection changed signal is emitted. With Gtk2 it is emitted only one
time, to indicate that selection has become empty. With Gtk3 it is
instead emitted several times, each time indicating that selection has
moved to the adjacent row.
The handler TreeView_Detail::on_selection_changed() only takes action
when the selection is not empty. So with Gtk3 it really takes action
and activates Win_GParted::on_partition_selected() with a pointer to old
data.
What's the purpose of TreeView_Detail::on_selection_changed()?
Its task is to update the selection in the drawing area above the
TreeViewDetail, the DrawingAreaVisualDisk, so that the selected
partition stays in sync on the two widgets.
Fix by blocking the signal handler during the treeview clear.
Reference:
[1] Commit - treeview: Handle the case where the cursor row gets deleted
1a2932ba29Closes#7 - Port to Gtk3
gdk_spawn_command_line_on_screen() is not present in Gtk3. The
documentation from Gtkmm 2.24 states [1]:
gdk_spawn_command_line_on_screen has been deprecated since version
2.24 and should not be used in newly-written code. This function is
being removed in 3.0. Use either g_spawn_command_line_sync(),
g_spawn_command_line_async() or GdkAppLaunchContext instead.
g_spawn_command_line_sync() and g_spawn_command_line_async() are screen
/ display agnostic, as such we would loose functionality. There is a
workaround, which involves setting the DISPLAY environment variable [2],
but it's a weak solution (and I don't know if it works on backends
other than X11).
GdkAppLaunchContext is an implementation of GIO's GAppLaunchContext that
handles launching an application in a graphical context [3]. Therefore
use GdkAppLaunchContext and GIO's GAppInfo.
GdkAppLaunchContext was introduced in Gtk2 version 2.14. The C++
wrapper Gdk::AppLaunchContext was introduced only in Gtkmm3 version 3.4
[4]. Bump the minimum required version of Gtkmm to 3.4.0 for this
requirement.
GAppInfo was introduced in GLib version 2.16. The C++ wrapper
Gio::AppInfo was introduced in Giomm version 2.16. Note that the
minimum required version for glibmm is already 2.32.
[1] GDK 2 Reference Manual, GdkScreen, gdk_spawn_on_screen()
https://developer.gnome.org/gdk2/2.24/GdkScreen.html#gdk-spawn-on-screen
[2] Migrating from GTK+ 2.x to GTK+ 3 - "Use GIO for launching applications"
https://developer.gnome.org/gtk3/stable/gtk-migrating-2-to-3.html#id-1.6.3.3.7
[3] GDK 3 Reference Manual - "Application launching"
https://developer.gnome.org/gdk3/stable/gdk3-Application-launching.html
[4] Gtkmm 3.4 Gdk::AppLaunchContext Class Reference, Detailed Description
https://developer.gnome.org/gtkmm/3.4/classGdk_1_1AppLaunchContext.html#detailsCloses#7 - Port to Gtk3
GParted uses Gtk::TreeViewColumn::get_cell_renderers(). This is not
present in Gtkmm3. Now Gtk::TreeViewColumn inherits from
Gtk::CellLayout and we have to use Gtk::CellLayout::get_cells() instead.
GtkCellLayout was introduced in Gtk2 version 2.18 as the common
interface for containers of cell renderers.
The C++ wrapper Gtk::CellLayout was introduced in Gtkmm2 version 2.18,
but Gtk::TreeViewColumn was never made to inherit from Gtk::CellLayout
to avoid breaking the API / ABI. That change was made for Gtkmm3.
This is an excerpt from gtkmm/treeviewcolumn.h header in Gtkmm2:
// TODO: Should be deprecated, but we cannot derive from CellLayout
// without breaking API and ABI.
/** Returns a list of all the cell renderers in the column,
* in no particular order.
*
* @return A list of Gtk::CellRenderers.
*/
Glib::ListHandle<CellRenderer*> get_cell_renderers();
Replace Gtk::TreeViewColumn::get_cell_renderers() with base class
method Gtk::CellLayout::get_cells().
Reference:
[1] Commit - "Deprecate get_cell_renderers implementations"
6abc52a29dCloses#7 - Port to Gtk3
In Gtk2 widgets draw themselves in response to the expose event signal.
In Gtk3 widgets draw themselves in response to the GtkWidget::draw
signal, and the signal handler gets a Cairo context as an argument.
Convert Gtk::DrawingArea rendering code to respond to the
GtkWidget::draw signal.
This commit is specific to the drawing area in the Create new Partition
dialog and the Resize/Move dialog.
Reference:
[1] Migrating from GTK+ 2.x to GTK+ 3 - "The GtkWidget::draw signal":
https://developer.gnome.org/gtk3/stable/ch26s02.html#id-1.6.3.4.11Closes#7 - Port to Gtk3
In Gtk2 widgets draw themselves in response to the expose event signal.
In Gtk3 widgets draw themselves in response to the GtkWidget::draw
signal, and the signal handler gets a Cairo context as an argument.
Convert Gtk::DrawingArea rendering code to respond to the
GtkWidget::draw signal.
This commit is specific to the drawing area contained in the main
application window (also called the DrawingAreaVisualDisk).
Reference:
[1] Migrating from GTK+ 2.x to GTK+ 3 - "The GtkWidget::draw signal":
https://developer.gnome.org/gtk3/stable/ch26s02.html#id-1.6.3.4.11Closes#7 - Port to Gtk3
In Gtk2 widgets draw themselves in response to the expose event signal.
In Gtk3 widgets draw themselves in response to the GtkWidget::draw
signal, and the signal handler gets a Cairo context as an argument.
Convert Gtk::DrawingArea rendering code to respond to the
GtkWidget::draw signal.
This commit is specific to the drawing area in the Partition Info
dialog.
Reference:
[1] Migrating from GTK+ 2.x to GTK+ 3 - "The GtkWidget::draw signal":
https://developer.gnome.org/gtk3/stable/ch26s02.html#id-1.6.3.4.11Closes#7 - Port to Gtk3
Starting from Gtkmm3 Gdk::Cursor objects cannot be constructed directly,
but instead you have to get a smart pointer to an instance by calling
the static member function Gdk::Cursor::create().
Gdk::Cursor::create() returns a Glib::RefPtr<Gdk::Cursor> object.
Gtkmm3 always uses Glib::RefPtr<Gdk::Cursor> in its interface and never
plain Gdk::Cursor.
Reference:
[1] Programming with gtkmm3, Changes in gtkmm3:
https://developer.gnome.org/gtkmm-tutorial/3.24/changes-gtkmm3.html.en
"... Gdk::Cursor are now used via Glib::RefPtr."
Closes#7 - Port to Gtk3
In Gtk3 individual headers cannot be included directly in application
code, only the header <gtk/gtk.h> can be included (with a few exceptions
for some platform specific headers).
This has always been considered good practice even for Gtk2, though was
not a hard requirement.
In Gtk3 this is enforced by preprocessor checks. Failure to do so
yields a preprocessor error and compilation fails:
"error: Only <gtk/gtk.h> can be included directly."
Change specific Gtk header includes to:
#include <gtk/gtk.h>
References:
[1] Migrating from GTK+ 2.x to GTK+ 3 - "Do not include individual headers"
https://developer.gnome.org/gtk3/stable/gtk-migrating-2-to-3.html#id-1.6.3.3.3
[2] Commit - "Remove all traces of GDK_PIXBUF/GTK_DISABLE_SINGLE_INCLUDES"
5e29973773Closes#7 - Port to Gtk3
Mike Fleetwood