It was difficult to retrieve whether a filesystem's label can be set on reformat.
The read_label flag can't be used as it decides whether to use the logic in the filesystem class
rather than the fallback in GParted::set_device_partitions, to determine the label of a partition.
The create_with_label flag is NONE for file systems that we cannot format with a
label (or that we cannot format at all).
The value is usually EXTERNAL for file systems that we can format with a label.
The read-only functionality is unused and the readonly parameter is
always false in copy_filesystem() and copy_blocks() methods. This has
been the case since the copy simulation was dropped by commit:
b9b4b2e55d
Remove simulation pass ( read test ) on move
Include guards need to be unique within GParted code and all included
library header files.
http://en.wikipedia.org/wiki/Include_guard#Difficulties
Use this model for all include guards:
#ifndef GPARTED_FILE_NAME_H
#define GPARTED_FILE_NAME_H
...
#endif /* GPARTED_FILE_NAME_H */
Closes Bug #539297 - Make include guards unique
The minimum NTFS volume size supported by the ntfs-3g mkntfs command
is 1 MiB. Since 1 extra sector is required for the backup NTFS boot
sector, an NTFS partition must be at least 1 MiB plus 1 sector.
To demonstrate, create a 1 MiB unformatted partition using MiB
alignment (/dev/sdd1), and then try to format the partition as NTFS.
# mkntfs -Q -v -L "ntfs-test" /dev/sdd1
Device is too small (1023kiB). Minimum NTFS volume size is 1MiB.
For GParted this means a minimum NTFS partition size of 2 MiB since
the smallest unit in the GUI is MiB.
Bug #697848 - Failure to Create 1 MiB NTFS Partition
Place the size and noaction options before the device name when resizing
an NTFS file system to match the order documented in the manual page.
Example fixed command:
# ntfsresize -P --force --force -s 104857600 --no-action /dev/sda11
Ext[234] file systems were being shrunk 1 KiB too small. Ntfs and
reiserfs file systems were being shrunk 1 byte too small. The resultant
file systems were ending up 1 block smaller than they could have been.
This looks like an accidental leftover from when GParted use to:
1) Shrink the file system 1 cylinder too small
2) Shrink the partition
3) Grow the file system to fill the partition
Relevant commit:
d663c3c277
removed cylindersize buffering during resize from the filesystems
Closes Bug #701075 - Setting the backup boot sector when resizing NTFS
Note the license text of this file differs slightly from the C++
source code license text to indicate this file is a part of GParted.
See: https://www.gnu.org/licenses/gpl-howto.html
For programs that are more than one file, it is better to replace
“this program” with the name of the program, and begin the
statement with a line saying “This file is part of NAME”.
For developers to build GParted in a git repository, logging the top
commit and build results to testbuild.log. Intended for use with
git-test-sequence to verify every change of a patch set compiles, but
can be used standalone too.
Example usage:
git-test-sequence origin/master.. testbuild.sh
Further documentation can be found on the GParted web site at page:
Git Source Code Management
http://www.gparted.org/git.php
Closes Bug #699881 - testbuild.sh - Builds GParted logging results
It was possible to make GParted crash by adding a label, check or new
UUID operation and then applying the operation before the view of
pending operations had finished fully opening. The operation would be
successfully applied but GParted would crash afterwards.
The fault was that Add_Operation() still enabled the Undo and Apply
buttons and processed the GTK event loop before merging the list of
pending operations. Faulty code flow went like this:
activate_*()
Add_Operation()
Add operation to the operations[] vector
Enable Undo and Apply buttons
Refresh_Visual()
Process GTK event loop
Process Apply button callback applying operations,
refreshing display and clearing operations[] vector
Merge operations in the operations[] vector
<< Core dump here >>
Merge_Operations()
Refresh_Visual()
This faulty code flow came about when merging of operations was added
and it didn't appreciate that the operations[] vector could have been
processed and cleared by Add_Operations() before the merge step.
Relevant commit:
b10349ae37
Merge overlapping operations (#438573)
Fragment of code in the label operation case:
2454 void Win_GParted::activate_label_partition()
2455 {
...
2472 Add_Operation( operation ) ;
2473
2474 // Verify if the two operations can be merged
2475 for ( unsigned int t = 0 ; t < operations .size() - 1 ; t++ )
2476 {
2477 if ( operations[ t ] ->type == OPERATION_LABEL_PARTITION )
2478 {
2479 if ( Merge_Operations( t, operations .size() - 1 ) )
2480 break;
2481 }
2482 }
Commentary in the crashing label operation case:
2472 The pending operation was already applied when Add_Operation()
returned resulting in the operations[] vector being cleared
setting its size to 0.
2475 The return type of operations.size() is an unsigned integral, so
the upper limit of the for loop is t < 0UL - 1. Assuming a
32-bit machine that's t < 4294967295.
2477 operations[] vector is access from out of bounds offset 0
upwards until unallocated memory is accessed resulting in a core
dump.
Fix this by not enabling the Undo and Apply buttons and processing the
GTK event loop until after merging of operations has been performed.
Fixed code flow goes like this:
activate_*()
Add_Operation()
Add operation to the operations[] vector
Merge operations in the operations[] vector
Merge_Operations()
show_operationslist()
Enable Undo and Apply buttons
Refresh_Visual()
Process GTK event loop
Process Apply button callback applying operations,
refreshing display and clearing operations[] vector
Not allowing the operations list to be process until after the merge
step is the be correct ordering. This also prevents the new operation
from flashing up in the operations list and then immediately
disappearing if merged. In the case of adding the first operation,
delaying enabling the Undo and Apply buttons is enough as the buttons
were previously disabled preventing the operation being applied before
the merge. In the case of adding further operations, processing of the
GTK event loop must also be delayed until after the merge to prevent the
operations being applied before the merge. Although that window of
opportunity would only be microseconds.
Bug #699452 - Crash when applying operations before pending operations
fully displayed
As part of bug 700228, the fat16 and fat32 code was combined. As a
result, the fat32.cc file no longer exists and hence is not available
for translation.
Mlabel sometimes writes uninitialised memory at the end of the label.
This causes mlabel, and therefore GParted, to display extra junk at the
end of the label. Depending on the bytes written GParted may also show
the following error on stdout:
(gpartedbin:18116): glibmm-CRITICAL **:
unhandled exception (type Glib::Error) in signal handler:
domain: g_convert_error
code : 1
what : Invalid byte sequence in conversion input
This is caused by a bug in mlabel, believed fixed in mtools 4.0.14.
Effects at least Fedora 14, RHEL/CentOS 6.x and Debian 6. (Use label
"1234567890" on Debian 6 to reproduce). Reproduction steps:
# mkdosfs -F16 /dev/sda7
mkdosfs 3.0.9 (31 Jan 2010)
# export MTOOLS_SKIP_CHECK=1
# mlabel ::123456 -i /dev/sda7
# mlabel -s :: -i /dev/sda7
Volume label is 123456~1t
It is not possible to detect which characters are junk so they can't be
trimmed. Instead just space pad labels so that at least newly written
labels aren't effected. (Fat labels are space padded on the disk by
definition anyway).
Bug #700228 - FAT16/32 labels are sometimes shown corrupted
There was virtually no difference between the separate modules for fat16
and fat32. Remove module fat32 and patch fat16 to serve both file
system subtypes. This is equivalent to what was previously done for
ext[234] by commit:
38dc55d49c
Combine duplicate code for ext[234]
Rename function to update_command_output() to better reflect that this
callback updates the UI with the latest output read from the command
being executed.
This makes more sense knowing a future change will add a separate
callback which parses the output read from the command and updates the
progress bar. This function should be named update_command_progress().
Rename the libsigc++ signals to signal_update and signal_eof to match
the naming used for signals in GParted.
fgrep 'sigc::signal' include/*.h
Also explicitly use the emit() method rather than using the object
operator(). This again is to match the convention in GParted and make
it more obvious what is happening.
fgrep '.emit(' include/*.h
Add xdg-su to list of possible programs used to acquire root
privileges in the gparted.desktop file.
Bug #699626 - Enable gparted.desktop to prompt for root on default
openSUSE installation
Add xdg-su to list of graphical switch-to-root programs to be
considered for gparted.desktop file.
The openSUSE GNU/Linux distribution includes the program xdg-su by
default for graphically prompting for root privilege.
This enhancement enables a user to compile and install gparted from
source code on openSUSE and have the gparted menu entry graphically
prompt for root privilege.
Bug #699626 - Enable gparted.desktop to prompt for root on default
openSUSE installation
The autoconf check for the Gtk::Window::set_default_icon_name() method
was failing to detect its availability, but only on Ubuntu >= 11.10.
Turns out that the autoconf check incorrectly defined the link libraries
via the C++ flags variable CXXFLAGS, rather than the LIBS variable.
This resulted in the libraries being specified in the wrong order on the
command line. The test only failed when Ubuntu also added the
"--as-needed" flag to the linker by default [1] which required the
libraries to be correctly specified at the end of the command line.
[1] Ubuntu 11.10 Release Notes, GCC 4.6 Toolchain
https://wiki.ubuntu.com/OneiricOcelot/ReleaseNotes#GCC_4.6_Toolchain
This fixes commit:
a042107883
Only use Gtk::Window::set_default_icon_name method when available
Bug #695279 - GParted doesn't compile on RHEL / CentOS 5.9
The previous commit missed one glibmm GSource wrapper in the form of the
io watch for the PipeCapture class. Convert this one to use glib
directly as well.
Bug #697727 - Segfault in livecd Gparted v 0.15.0-3 when copying
partition
Applications are moving away from storing icons in /usr/share/pixmaps,
instead preferring /usr/share/icons/hicolor/$SIZE/apps, so only install
the fallback icon when GParted requires it.
Bug #695279 - GParted doesn't compile on RHEL / CentOS 5.9
On RHEL / CentOS 5.9 GParted couldn't set an icon as the
set_default_icon_name() method is not available. See commit [1] for
details.
Re-add the old set_icon_from_file() method as a fallback and re-install
a GParted pixmap as was used before commit [2].
Commit [1]:
a042107883
Only use Gtk::Window::set_default_icon_name method when available
Commit [2]:
f5a80bc904
Enabled GParted to use themed app icon (Tango theme)
Bug #695279 - GParted doesn't compile on RHEL / CentOS 5.9
On RHEL / CentOS 5.9 GParted failed to run any external commands and
instead reported the following warnings to the terminal:
# src/gpartedbin
======================
libparted : 1.8.1
======================
Failed to change to directory '' (No such file or directory)
Failed to change to directory '' (No such file or directory)
Failed to change to directory '' (No such file or directory)
...
Utils::execute_command() and FileSystem::execute_command() passed a zero
length string for the working directory to
Glib::spawn_async_with_pipes() to mean don't change directory. Instead
glibmm just tried to change to the directory with a zero length name.
This was fixed with glibmm >= 2.21.2 released July 2009, however RHEL /
CentOS 5.9 only has glibmm 2.12.10.
Relevant glibmm fix:
Treat empty Glib::spawn*() working dir as unset
https://git.gnome.org/browse/glibmm/commit/?id=8a7805cbbe6d268e975669349beb4e82d971537d
Fix by simply specifying ".", the current working directory, as the
directory to change into before executing all commands.
Bug #695279 - GParted doesn't compile on RHEL / CentOS 5.9
Glib::ustring::compose() method requires glibmm >= 2.16, but RHEL /
CentOS 5.9 only provides glibmm 2.12. Replace with String::ucompose()
as is used everywhere else in the code.
Add missing include for kill() and SIGINT declarations.
Bug #695279 - GParted doesn't compile on RHEL / CentOS 5.9
Roughly HFSX is a case sensitive version of the HFS+ file system.
Parted reports such a file system as "hfsx" rather than "hfs+".
# mkfs.hfsplus -v "case insensitive hfs+" /dev/sda7
Initialized /dev/sda7 as a 1024 MB HFS Plus volume
# mkfs.hfsplus -s -v "case sensitive hfs+" /dev/sda8
Initialized /dev/sda8 as a 1024 MB HFS Plus volume
# parted /dev/sda print
...
Number Start End Size Type File system Flags
...
7 356GB 357GB 1074MB logical hfs+
8 357GB 358GB 1074MB logical hfsx
# blkid /dev/sda[78]
/dev/sda7: LABEL="case insensitive hfs+" TYPE="hfsplus"
/dev/sda8: LABEL="case sensitive hfs+" TYPE="hfsplus"
Make GParted recognise HFSX file system variants too.
Closes Bug #698876 - GParted fails to recognize HFS+ partition (possible
due to disabled journaling)
In some circumstances gparted would appear to scan forever if it
encountered a blank hard disk. This would happen if the timing of
events was right and gparted encountered a disk without a partition
table. The missing partition table would cause a call to the
exception handler, which could get stuck in a thread waiting position.
The problem was traced back to the ped_exception_handler
and a cond.signal() call missing the requisite mutex.lock() and
mutex.unlock() around the signal call.
Closes Bug #697518 - gparted scans forever blank disk in virtualbox
The glibmm GSource wrappers have a bug where they do not do
reference counting properly, and have a race condition where
the background thread can try to touch the source after the
main thread has already processed and destroyed it. This
results in writes to freed memory and sometimes this causes
crashes or other erratic behavior. Avoid using the glibmm
wrappers and use glib directly. See bug #561885 for details
of the glibmm bug.
Bug #697727 - Segfault in livecd Gparted v 0.15.0-3 when copying partition
For an absolutely full NTFS GParted doesn't show the file system usage
but instead shows a warning against the partition.
GParted was looking only for "resize at %d" to determine file system
used figure in the output from the ntfsresize command. Also handle
finding "ERROR: Volume is full" too to derive used figure.
NTFS with 1 block free case:
# ntfsresize --info --force --no-progress-bar /dev/sda9
...
Current volume size: 1073738240 bytes (1074 MB)
...
Collecting resizing constraints ...
You might resize at 1073737728 bytes (freeing 4096 bytes).
...
# echo $?
0
Absolutely full NTFS case:
# ntfsresize --info --force --no-progress-bar /dev/sda9
...
Current volume size: 1073738240 bytes (1074 MB)
...
Collecting resizing constraints ...
ERROR: Volume is full. To shrink it, delete unused files.
# echo $?
1
Closes Bug #697946 - Absolutely full NTFS reported as partition error
Sinlu Bes