Currently GParted assumes that a file system fills its containing
partition. This is not always true and can occur when resizing is
performed outside of GParted or a resize operation fails. GParted
doesn't display any information about unallocated space to the user
and in most cases it is simply included in used space.
Add partition unallocated space accounting. Make GParted record the
unallocated space for mounted file system and display a warning in the
Partition Information dialog when too much unallocated space is found.
Partition::set_sector_usage( fs_size, fs_unused ), is the new preferred
method of recording file system usage because it allows the unallocated
space in a partition to be calculated. Partition::Set_Unused() and
Partition::set_used() are now deprecated.
NOTES:
1) Set the minimum unallocated space to be 5% before considering it
significant to avoid false reporting. Worst case found was a
mounted xfs file system in a 100MiB partition, which reports as
~4.7% unallocated according to file system size from statvfs().
However, it reports as having no unallocated space using xfs
specific tools.
2) Unallocated space is only a graphical representation for the user.
GParted must still use relevant tools to resize file systems before
shrinking the data and can't assume all unallocated space exists
after the file system at the end of the partition.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
The parted-3.1 release brings back FAT16/FAT32 and HFS/HFS+ file
system resize capabilities in a new libparted fs resize library.
The following operations are again available when GParted is linked
with parted-3.1:
FAT16 - grow and shrink
FAT32 - grow and shrink
HFS - shrink
HFS+ - shrink
Note that there is a difference in how move actions are handled for
FAT16/FAT32 file systems based on parted version.
When GParted is linked with parted >= 3.0:
FAT16 - move performed internally by GParted
FAT32 - move performed internally by GParted
When GParted is linked with parted < 3.0:
FAT16 - move performed by libparted
FAT32 - move performed by libparted
Thanks goes to Jim Meyering for restoring these file system resizing
capabilities in Parted 3.1 with a new libparted fs resize library.
Closes Bug #668281 - minimal file-system resize API? (FAT and HFS*
only)
Also update to use LVM terminology, such that a Physical Volume is
referred to as a member of a Volume Group. Status of an LVM2 PV is now
displayed using one of the following messages:
Not active (Not a member of any volume group)
VGNAME not active
VGNAME not active and exported
VGNAME active
Bug #160787 - lvm support
GParted would crash if there were any embeded spaces in the output from
the command used to query LVM2 PVs. There aren't normally any embeded
spaces, but they can occur in certain degrated situations. For example
if one of the PVs in a VG spanning two PVs is lost the PV is displayed
as "unknown device" rather than its actual device name:
# lvm pvs --nosuffix --units b --separator , -o pv_name,pv_free,vg_name,lv_name,lv_attr
Couldn't find device with uuid DMEi8r-9Vvy-w0Ok-CSSn-oLmY-YrY3-1PBznz.
PV,PFree,VG,LV,Attr
/dev/sda11,2143289344,GParted-VG1,,
unknown device,1619001344,GParted-VG1,lvol0,-wi---
unknown device,1619001344,GParted-VG1,,
This was loaded into the cache as:
["/dev/sda11,2143289344,GParted-VG1,,",
"unknown",
"device,1619001344,GParted-VG1,lvol0,-wi---",
"unknown",
"device,1619001344,GParted-VG1,,"]
The crash would happen when trying to access the VG name or LV flags on
a line without enough comma separated fields.
Improve parsing of the output from "lvm pvs" so that lines are not split
on embeded spaces. Don't crash on lines without without enough comma
separated fields.
Bug #160787 - lvm support
Previously any errors which occurred when running LVM commands used to
load the LVM2_PV_Info cache were simply ignored and the cache wasn't
loaded. This lead to missing information about LVM2 PVs, but the user
had no indication as to why.
Now when any errors occur the command ran and all output is captured.
This is displayed to the user, along with a suitable warning message, in
the Partition Information dialog.
Bug #160787 - lvm support
Create function Utils::kernel_version_at_least() to check that the
current Linux kernel is a particular version or higher.
Update nilfs2 to use this function to determine whether the kernel is
new enough to support file system resizing.
Previously used "dmsetup info" to directly list device-mapper mapping
names in the kernel to identify active Logical Volumes. However GParted
failed to recognise active LVs if the VGNAME contains any hyphens (-).
This is because LVM encodes hyphens as double hyphens in the mapping
name.
To avoid having to duplicate the LVM hyphen encoding in GParted, switch
to using "lvm lvs" to list LVs.
# dmsetup info --columns --noheadings --separator , -o name
GParted_VG1-lvol_00
GParted--VG2-lvol--00
# lvm lvs --noheadings --separator , -o lv_name,vg_name,lv_attr
lvol_00,GParted_VG1,-wi-a-
lvol-00,GParted-VG2,-wi-a-
lvol-01,GParted-VG3,-wi---
.^.
(-) not active, (a) or any other character considered active. Reference
lvs(8).
Bug #160787 - lvm support
As the Mount Point column is being borrowed to display the PV's VGNAME,
also suppress generation of the "Mount on" submenu for LVM2 PVs.
Bug #160787 - lvm support
Previously when GParted was started LVM2_PV_Info cache was loaded twice,
executing LVM2 PV querying commands twice. Firstly when
lvm2_pv::get_filesystem_support() was checking if LVM2 PV support was
available, and secondly when forced by a refresh in
GParted_Core::set_devices().
Implement lazy initialization. Only load the cache when forced by the
above mentioned refresh or having to return a value when the cache is
not yet loaded. Do not initialize the cache when just checking if LVM2
PV support is available.
Bug #160787 - lvm support
Cache results from querying all LVM2 PVs in one go to minimise the
number of times lvm commands are executed. Take inspiration from
caching performed by FS_Info and Proc_Partitions_Info.
Bug #160787 - lvm support
Add minimal support for just reporting the space usage of LVM2 PVs.
Accept libparted / blkid detection of LVM2 PVs first, falling back on
GParted's specific detection code otherwise. Maintain LVM not supported
warning message.
Bug #160787 - lvm support
This is the first step of adding support for just LVM2 Phyiscal Volumes,
a subset of full LVM2 support.
Make it clear that it is only LVM2 PVs being treated like a file system.
Bug #160787 - lvm support
Add the ability to set a new random UUID on file systems that provide
the appropriate tools to perform this action.
Update the help manual to include this new functionality. Also add
reference links to "setting a partition label" and "changing a
partition UUID" in the "copying and pasting a partition" section.
This patch does not include setting the UUID on an NTFS file system.
Bug #667278 - Add support for setting UUID
Bug #608308 - fix documentation - Copying and Pasting a Partition
There is a lot of commonality and code repetition for resizing of file
systems which can only be resized while mounted. Resizing of btrfs, jfs
and xfs all follow the pattern: mkdir, mount, resize, umount and rmdir.
Copying an xfs file system also uses a similar pattern, but for the
source and destination xfs file systems simultaneously.
Add three helper functions to the FileSystem class which implement
common tasks, allowing mounted file system resizing to be implemented
more simply.
Also add a function to the Utils class which checks whether the kernel
supports a file system. It handles the case of non-loaded modules,
which currently leads to reporting the growing of jfs and xfs as
unsupported.
We used to just log libparted exceptions without handling them. This patch
changes the exception handler to display a modal dialog box and return the
chosen action to libparted.
Requires libparted 2.4 or higher, or blkid from utils-linux 2.20 or
higher for nilfs2 file system detection.
Requires nilfs-utils for nilfs2 file system support.
Closes Bug #642842 - nilfs is not detected
When a new operation is added to operations list, check if a merge
is possible depending on the operation type:
OPERATION_RESIZE_MOVE: 2 consecutive "resize" operations on the
same partition
OPERATION_LABEL_PARTITION: 2 "label change" operations (need not be
consecutive) on the same partition
OPERATION_CHECK: 2 "check" operations (need not be
consecutive) on the same partition
OPERATION_FORMAT: 2 consecutive "format" operations on the
same partition
Closes Bug #438573 - Cancel out overlapping actions
Also fix a bug when copying partition using the Partition::Set(...)
method. This method did not initialize "sectors_used" and
"sectors_unused" members.
Some classes contained private attributes which were used only by a single
member function. Such items were moved to the corresponding function implementations
to stress their limited usage scope.
A few unused variables were also deleted.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
The release of (lib)parted 3.0 includes a change to the Application
Programing Interface - API. Most importantly, libparted 3.0 removes
many file system specific function calls, and hence the capabilities
provided by these functions. In order for GParted to compile and link
with libparted 3.0, this libparted functionality is lost.
Specifically, the functionality that is lost when GParted is compiled
and linked with libparted 3.0 is as follows:
- Loss of ability to grow and shrink FAT16 and FAT32 file systems
- Loss of ability to shrink HFS and HFS+ file systems
- Loss of ability to determine used and unused sectors in HFS and
HFS+ file systems
- Loss of ability to erase file system signatures on partition
create and format
It is hoped that other free software projects will include some or all
of the above lost functionality, which can then be added back to
GParted.
This commit includes a change in how FAT16 and FAT32 file systems are
moved. Specifically the move is now performed internally by GParted
when linked with libparted 3.0. The move functionality is provided by
libparted for prior libparted versions (e.g. less than 3.0).
This is the final enhancement in a series of commits that enable
GParted to compile with libparted version 3.0.
Closes Bug #651559 - Doesn't compile against parted 3.0
Usage of the kpartx package to create partition names has been
completely removed. Hence kpartx is no longer even an optionally used
package by gparted.
This change is related to the following bug report:
Ubuntu launchpad bug 719129 - [Natty] Gparted duplicates dmraid
partition devices
https://bugs.launchpad.net/ubuntu/+source/gparted/+bug/719129
The reason for refactoring is to simplify the large GParted_Core
class, to help minimize disk reads, and to group the logic for
processing the file /proc/partitions into a single logical class.
This reason for refactoring is to simplify the large GParted_Core
class, to help minimize disk reads, and to group the logic for
processing the file /proc/partitions into a single logical class.
This adds initial handlers for Btrfs; only .create, .check and
.read_label are done for now, via external btrfs-tools.
Other methods are still only stubs.
Newer versions (dmraid-1.0.0-rc16?) of dmraid default to always
creating partition names by inserting the letter 'p' between the
device name and the partition number. Since this is not
consistent with older versions of dmraid, add extra logic to
ensure that newer versions of dmraid do not insert this extra
letter 'p'.
Rename method get_udev_name to get_udev_dm_name and enhance to
retrieve the property DM_NAME.
Handle situation where parted, and hence libparted, has been
configured with --disable-device-mapper. In this situation on
some distros the device name could be /dev/dm-0. This results in
invalid partition names such as /dev/dm-0p1. Add logic to decode
the actual /dev/mapper name.
Make align to MiB the default setting instead of align to cylinder.
Migrate logic for alignment to cylinder into its own method
snap_to_cylinder, and place common logic in snap_to_alignment.
Add alignment checks for situations where space is needed for Master
Boot Record or Extended Boot Record.
Adjust ranges on spin buttons according to required boot record space.
Copy fix for off by one sector (#596552) from
Dialog_Partition_New::Get_New_Partition to
Dialog_Base_Partition::Get_New_Partition
Enhance resize / move logic for checking locations of nearby logical
partitions to not depend on the partition ordering.
Note: This commit does not include limiting graphic movement according
to required boot record space.
Also add signal handler to alignment menu to update file system
minimum size.
This enhancement is to prepare for adding a third alignment
option to align to MiB.
With the removal of the 512 byte constants, such as MEBIBYTE, it
was possible to rename the _FACTOR constants back to BYTE
constants. The _FACTOR constants, such as MEBI_FACTOR, were a
temporary measure to help in the transition to support devices
with sector sizes > 512 bytes.
The device sector size is needed in all calculations that convert
between sectors and bytes. The device sector_size is included in
the partition object because this object is used to contain
operation information in addition to actual partitions and
unallocated space. A second option was considered to pass the
device object to many methods, but this was considered a much
larger task that might not provide significant gains in
maintainability.
According to parted documentation, only "msdos" and "dvh" disk
types (or partition table types) support extended partitions.
All other disk types support primary partitions only.
Remove commented code and boolean use-C-lang parameter for
Utils::num_to_str() method because this bug was fixed in
gcc-4.0.3. The GNU gcc compiler versions 4 and up are now
commonly in use. Also due to previous partial commenting and
removal of the code, the code was non-functional
Thanks goes to Jan Claeys for pointing out this clean up
opportunity.
Restore copyright entries by original author to those of his last
known repository commit titled "released gparted-0.3.4 on
LarryT's request." on Feb 25, 2007.
Add my own copyright entries for files in which I changed source
code. Files in which I only made spelling changes do not have my
copyright entry added.
Auto detection of Linux software RAID devices was lost in GParted
0.3.8. This was because device scanning by the libparted device
call ped_device_probe_all() was replaced with custom code within
GParted to scan /proc/partitions for devices.
The reason the libparted call was replaced was due to a long
scanning problem with ped_device_probe_all(), a non-existent
physical floppy device, and a BIOS setting indicating a floppy
drive existed. See bug #351753:
https://bugzilla.gnome.org/show_bug.cgi?id=351753
Improve the feedback to the user when creating or pasting a
partition on a device with no partition table found.
Prior to this enhancement if a user tried to create or paste a
partition onto a device with no partition table found, GParted
would present the user with a Create Partition Table dialog.
When creating a new partition this could cause confusion for
users who were trying to format the disk. The user could
mistakenly believe the choice of an MS-DOS file system was being
presented.
Similarly on a paste operation it could be confusing to be
presented with a dialog to create a partition table without any
explanation of why a partition table was suddenly required in the
midst of the paste operation.
Neither the new partition creation, nor the partition paste
actions were performed after the Create Partition Table dialog
was displayed.
It appears that different dmraid versions handle specifying a
single dmraid device differently.
dmraid-1.0.0.rc14 uses a partial name only,
such as "isw" or "isw_cjbdddajhi".
dmriad-1.0.0.rc15 uses a full name only,
such as "isw_cjbdddajhi_Vol0".
To maintain compatibility with the broadest range of dmraid versions,
the ability to specify a single dmraid device is being removed.
Some distros appear to display /dev/dm-# device names with
libparted. Since this fails a pattern match with the dmraid
device name, check with udev to see if a pattern match is
possible with the name returned from udevinfo or udevadm info.
For example:
/dev/mapper/isw_cjbdddajhi_Vol0 is the device name
/dev/dm-0 is a symbolic link pointing to the above device name
Normally, the blkid command will detect the UUID for a file system.
In cases where blkid fails to detect the UUID and the vol_id command
is available, then try using the vol_id command.
- Changed title Features to File System Support.
- Renamed button Refresh to Rescan Support.
- Created expander for legend and added narrative.
- Removed columns detect and read.
svn path=/trunk/; revision=966
* include/Device.h,
include/Dialog_Base_Partition.h,
src/Dialog_Base_Partition.cc: replaced 'long' with 'Sector' to
prefent overflows with really large devices.
* include/Makefile.am,
include/Operation.h,
include/Win_GParted.h,
src/GParted_Core.cc,
src/Makefile.am,
src/Win_GParted.cc,
include/OperationCheck.h (new),
src/OperationCheck.cc (new): added 'check' operation. The
functionality was already there, but it was not possible yet to
activate it from the gui.
* added support for reading volumelabels. Atm we only read ext2/3, but
the infrastructure for adding the other filesystems is in place.
It's simply a matter of finding the right commands and parsing the
output. (see #338528 for more info)
* src/Dialog_Progress.cc: make sure progressfraction stays between 0.0
and 1.0
* include/GParted_Core.h,
src/GParted_Core.cc: implemented rollback in case of failed move of
overlapping filesystems. Together with the readonly test moving
should be quite save now :)
* include/Dialog_Progress.h,
src/Dialog_Progress.cc: Show number of warnings after all operations
are completed. Also urge people to save their details in case of
error.
* include/GParted_Core.h,
src/GParted_Core.cc: declared char * buf global, so it can be
initialized in copy_blocks(). This is a lot more efficient than
initializing it on every copy_block()
* include/Partition.h,
src/Partition.cc: added test_overlap()
* include/GParted_Core.h,
src/GParted_Core.cc: perform a readonly testrun before the actual
move if destination overlaps source.
* include/GParted_Core.h,
src/GParted_Core.cc: update ntfsbootsector after first sector has
changed. This is necessary to let windows boot correctly afterwards.
* src/ntfs.cc: added FIXME
* include/GParted_Core.h,
src/GParted_Core.cc: tried to fix a couple of errors with moving to
the right with overlap (thanks Larry for hunting ;) )
Although everything seems to work well i'm still not sure if
everything is 100% ok.
I guess everything could use some more testing, which is exactly
what i plan to do this weekend :)
* happy 24th birthday Johannes! :^)
* include/GParted_Core.h,
src/GParted_Core.cc: restructured resize_move() to be more robust.
This will hopefully tackle a couple of issues which came up during
the public testing.
* include/Utils.h,
src/Utils.cc: added format_time()
* include/OperationDetail.h,
src/OperationDetail.cc: keep track of elapsed time between
STATUS_EXECUTE and STATUS_[ERROR|SUCCES]
* include/Dialog_Progress.h,
src/Dialog_Progress.cc: show elapsed time in the details per (sub)
process
* src/GParted_Core.cc: use Utils::format_time()
* include/GParted_Core.h,
src/GParted_Core.cc: fixed some issues with combi move+shrink on
fat* and hfs* filesystems.
Also call wait_for_node() from commit() if 'node' was provided.
* include/GParted_Core.h,
src/GParted_Core.cc: created set_progress_info() (i actually planned
on adding some time remaining stuff, but xfiles is waiting ;) )
* include/GParted_Core.h,
src/GParted_Core.cc: did some work on disabling of automounting of
removable drives. The current method is not entirely to my liking
but it seems to work.
* implemented some stuff to find a good blocksize to use for
copy/move. Actually i'm not really happy with it, because probing
seems suboptimal, but it's better than nothing. As soon as i have
some time i should do some research on the subject to find a better
solution.
* include/Win_GParted.h,
src/Win_GParted.cc: construct operations in the activate*()
functions instead of in Add_Operation(). This approach allows for
more customization of operations.
* improved errorhandling a bit. At the initialscan we store
errors/warnings now in a list per partition and show the in the
partitioninfo dialog.
While executing an operation we collect all libparted exceptions in
a list and attach this list to the operationdetails when everything
is done.
* include/FileSystem.h,
include/GParted_Core.h,
src/FileSystem.cc,
src/GParted_Core.cc,
src/ext2.cc,
src/ext3.cc,
src/ntfs.cc,
src/reiserfs.cc: removed cylindersize buffering during resize from
the filesystems. It is not needed anymore now we calculate the new
position before calling this.
Also added some extra progressfeedback in the core
* src/Win_GParted.cc: added FIXME:
* include/GParted_Core.h,
src/GParted_Core.cc,
src/fat32.cc: decoupled libparted partition and filesystemresizing.
This resulted in a much more consistent core. This also affected
several other aspects of resizing/moving in a positive way.
* include/GParted_Core.h,
src/GParted_Core.cc,
src/Win_GParted.cc: perform some checks before adding a new
operation to the list.
* src/Partition.cc: made get_length() a bit safer
* include/Dialog_Progress.h,
include/Operation.h,
src/Dialog_Progress.cc,
src/GParted_Core.cc: show warning in progressfeedback if a certain
action is n/a. Of course we only allow these actions if the results
are non-lethal.
* src/Win_GParted.cc,
include/GParted_Core.h,
src/GParted_Core.cc: implemented snap to cylinder algorithm.
Although the algorithm is very simple, it seems to work perfectly.
However, some additional testing is required.
* include/GParted_Core.h,
src/GParted_Core.cc,
src/ext2.cc: added movesupport, atm in experimental state and needs
lots of cleaning. only enabled for ext2, but should work for all
filesystems.
* src/DialogFeatures.cc: added alternating rowcolours (see #342682)
* include/Dialog_Partition_Copy.h,
include/GParted_Core.h,
include/OperationCopy.h,
include/Win_GParted.h,
src/Dialog_Partition_Copy.cc,
src/GParted_Core.cc,
src/OperationCopy.cc,
src/Win_GParted.cc: made blocksize settable by the user.
* Use ped_device_read and ped_device_write instead of 'dd' to copy
filesystems.
Modified progressdetails to provide more detailed feedback about a
process.
Basicly these were all changes to the infrastructure to make the
incorporation of the 'move-code' a bit easier.
( sorry, not in the mood to list all affected files ;)
* src/DialogManageFlags.cc: disabled resizing of this dialog
* include/DialogFeatures.h,
include/Makefile.am,
include/Win_GParted.h,
src/DialogFeatures.cc,
src/Makefile.am,
src/Win_GParted.cc: renamed 'Filesystems' to 'Features' in the
featuredialog to better reflect the actual functionality
* include/Dialog_Filesystems.h,
src/Dialog_Filesystems.cc: removed
* include/GParted_Core.h,
src/GParted_Core.cc: improved disabling of automounting. It's still
somewhat crude, but right now it's ok for some semi-public testing.
I'll do some cleanups tomorrow morning.
* src/Dialog_Progress.cc: added FIXME
* include/GParted_Core.h,
src/GParted_Core.cc: an initial solution for the automount problem.
I still need to add something to prevent just created partitions from
getting mounted. (see #324220 for more info)
* include/Partition.h,
src/Partition.cc: added set_used() and operator!=
* src/Dialog_Partition_Copy.cc,
src/GParted_Core.cc,
src/OperationCopy.cc,
src/Win_GParted.cc: it's now possible to copy from partition to
partition. (before this it was only possible to copy to unallocated
space)
* include/TreeView_Detail.h,
src/TreeView_Detail.cc: made icon behaviour more intelligent
* src/GParted_Core.cc: small improvement in open_device_and_disk()
* include/DrawingAreaVisualDisk.h,
src/DrawingAreaVisualDisk.cc: fixed a few issues with
selecting/activating partitions.
* include/Utils.h,
src/Utils.cc,
src/Dialog_Disklabel.cc,
src/Dialog_Partition_Info.cc (mk_label): improved support for
aligment.
* src/Win_GParted.cc: fixed a small alignmentissue in the devices
submenu.
* include/DrawingAreaVisualDisk.h,
src/DrawingAreaVisualDisk.cc: another change to highlighting of
selected partition.
* include/Partition.h,
src/Win_GParted.cc: deal properly with just formatted partitions
* src/Operation.cc: added FIXME
* changed the way devices and partitions store their devicepaths.
Instead of holding a 'realpath' and a symbolic path we store paths
in a list. This allows for improved detection of mountpoins, free
space, etc..
Also fixed a nasty bug which showed up when you copy a partition
from one device to another. (thanks to mario for the report)
* include/DrawingAreaVisualDisk.h,
include/Makefile.am,
include/Win_GParted.h
src/DrawingAreaVisualDisk.cc,
src/Makefile.am
src/Win_GParted.cc: removed the frame from the visualdiskwidget and
changed some visual details. Also changed visual representation of
selected partition. The latter might be considered as a work in
progress.
* include/FrameVisualDisk.h,
src/FrameVisualDisk.cc: Removed.
* include/GParted_Core.h,
include/TreeView_Detail.h,
src/GParted_Core.cc,
src/TreeView_Detail.cc: show greyed-out mountpoint of unmounted
partitions in the treeview as an improved way to identify
partitions. (#333027)
* src/Win_GParted.cc: cleanups
* include/FrameVisualDisk.h,
src/FrameVisualDisk.cc: improved the algorithm to deal with lost
pixels after seeing some problems with rather insane
partitiontables.
* src/Dialog_Partition_Info.cc: minor cleanup
* src/GParted_Core.cc: show error in partitioninfo if statvfs fails
* src/TreeView_Detail.cc: added FIXME
* include/Frame_Resizer_Base.h,
include/Frame_Resizer_Extended.h,
src/Dialog_Base_Partition.cc,
src/Dialog_Partition_Copy.cc,
src/Dialog_Partition_New.cc,
src/Dialog_Partition_Resize_Move.cc,
src/Frame_Resizer_Base.cc,
src/Frame_Resizer_Extended.cc: did lots of work on the resizer, it's
behaviour should be more natural and satisfying now. (see also
#331591)
* src/Win_GParted.cc: extended partition was resizable even when it's
busy. fixed.
* src/ntfs.cc: made scan output more readable.
* src/FrameVisualDisk.cc: added FIXME
* include/GParted_Core.h,
src/GParted_Core.cc: catch libparted exceptions and display them in
the operationdetails if an operation has failed.
* src/Dialog_Progress.cc: small cosmetic change to the errordialog.
* in some places i still used MiB's instead of sectors to store sizes.
this has been fixed everywhere. Only the spinbuttons still use
MiB's. I have a few ideas on how to solve this, but i'll take it up
with #usability first.
* src/FrameVisualDisk.cc: prevent crasher when visual_disks is empty.
* include/Win_GParted.h,
src/Win_GParted.cc: load devices at startup on signal_show instead
of dispatching it from the c'tor.
Also did some cleanups in the behaviour of opening and closing of
the operationslist.
* include/GParted_Core.h,
src/GParted_Core.cc,
src/Win_GParted.cc: deal with the rare situation when 2 partitions
are mounted on the same mountpoint. (see also #330327)
* include/GParted_Core.h,
include/Partition.h,
src/Dialog_Partition_Info.cc,
src/GParted_Core.cc,
src/Partition.cc,
src/TreeView_Detail.cc: store flags in a list instead of a string.
* Makefile.am,
src/Makefile.am: cleanups
* include/GParted_Core.h,
include/Partition.h,
src/Dialog_Partition_Info.cc,
src/GParted_Core.cc,
src/Partition.cc,
src/TreeView_Detail.cc,
src/Win_GParted.cc: support partitions with multiple mountpoints
(see also #330327)
Mike Fleetwood