To make sure that everything is formatted with the same black version
as CI.
I sometimes use isort for new files to get nicely ordered imports,
so add it as well. Also set the isort configuration to format in a
way that is compatible with black.
* Add basic FP8 KV cache support
This change adds rudimentary FP8 KV cache support. The support is
enabled by passing `--kv-cache-dtype fp8_e5m2` to the launcher. Doing so
uses this type for the KV cache. However support is still limited:
* Only the `fp8_e5m2` type is supported.
* The KV cache layout is the same as `float16`/`bfloat16` (HND).
* The FP8 KV cache is only supported for FlashInfer.
* Loading of scales is not yet supported.
* Fix Cargo.toml
* feat: unroll notify_error if no tool is choosen
* fix: expect simple message when no tool is selected
* fix: improve test to avoid notify_error
* fix: improve docs and indicate change in expected response
* fix: adjust linting in test file
* Working loading state.
* Preprocessing.
* Working state ? (Broke idefics1 temporarily).
* Cleaner condition.
* Fix idefics.
* Updating config, removing TODO
* Mllama
* Ugrade transformers 4.45
* Flashing mllama.
* Starting to get there.
* Working state.
* Integrations tests for mllama (cutting to 10 tokens because there seems'
to be instability after (meaning size of the batch matters.
* Updating model link.
* Earlier assert.
* Fix vlm ?
* remove log.
* Force ignore all images but last.
* Default dtype bfloat16.
* Update integration test after switch to bf16.
* Remove dead code.
* Removed dead code.
* Upgrade the flake to latest transformers/tokenizers
* Move to hf tgi-nix
* Upgrade to 0.5.0
* feat: support phi3.5 moe model loading
* fix: prefer llama base model and improve rotary logic
* feat: return reasonable generation and add integration test
* fix: run lint and update docs
* fix: rerun lint for openapi docs
* fix: prefer do_sample false unless temp is set by user, and update chat tests
* fix: small typo adjustments
* fix: consolidate long rope paths
* fix: revert greedy by default and test changes
* Vendor configuration so that we don't have to `trust_remote_code`
* Use SparseMoELayer
* Add support for dense MoE
* Some type annotations
* Add the usual model tests
* Ruff.
---------
Co-authored-by: Daniël de Kok <me@danieldk.eu>
Co-authored-by: Nicolas Patry <patry.nicolas@protonmail.com>
This change add support for MoE models that use GPTQ quantization.
Currently only models with the following properties are supported:
- No `desc_act` with tensor parallelism, unless `group_size=-1`.
- No asymmetric quantization.
- No AWQ.
* Stream options.
* Fetch stuff from nix integration test for easier testing.
* Adding the assert.
* Only send the usage when asked for.
* Update the docs.
* Impure test because we need network.
* develop.
* Optional usage.
* Fixes.
* Workflow
* Move to moe-kernels package and switch to common MoE layer
This change introduces the new `moe-kernels` package:
- Add `moe-kernels` as a dependency.
- Introduce a `SparseMoELayer` module that can be used by MoE
models.
- Port over Mixtral and Deepseek.
* Make `cargo check` pass
* Update runner
* Adding a test for FD.
* Fixing flashdecoding (empty batch doesn't work).
* Fixing the invalid popping.
* Fixing radix with block_size > 1
* Last reference.
* Use an actual hash.
* Update hash for slice.len() == 1
* Update the locks.
* Increasing docker timeout.
* Adding prefix test.
* [WIP] tmp dump of integration load tests.
* Remove other tensor creation.
* Fixed the radix tree.
Used a slice everywhere in radix.rs to keep the cheap Arc cloning
instead of recomputing the input_ids.
* Fix parsing
* Is it really flashinfer version ?
* Remove some comments.
* Revert the max prefix hit.
* Adding numpy to diff.
* Upgraded flashinfer.
* Upgrading some stuff.
* Are we done yet ?
* Minor fixup
* Remove 1 log and put back the other.
* Add comment for why slot 0 is OK.
* Mounting on the job.
* Get me a debug branch
* Debugging CIs is fun.
* Attempt #28
* wip
* Tmate.
* Praying.
* Updating VLM causal model with updated context.
* Important line got squashed.
* Tmate again.
* Fingers crossed.
* We want only 1 run of integration tests.....
---------
Co-authored-by: Guillaume LEGENDRE <glegendre01@gmail.com>
* Making prefix/flashinfer the default and testing the full release tests.
* Include flashinfer in the docker.
* Using prebuilt.
* Allowing window_left_size (dummy version).
* Disabling flashinfer/prefix caching on odd head_dim
* Disable prefix caching for lora.
* More specific codes.
* Update lock
* Updating integration tests with new values with FI/FD.
Remove paged as a default too, and using FD everywhere.
* Update cargo lock ?
* Upgrade to 1.80 because of bitstream...
* Everywhere 1.80
* Forgot last default place.
* Apply suggestions from code review
Co-authored-by: drbh <david.richard.holtz@gmail.com>
* Updated flake lock
* Tmp
* Upgrade resolution system for less errors in resolution.
* Remove lambda for cleaner function.
* Handling debugger.
* OVerride the env in server tests.
* Is this enough to make it work ?
* This seems to be working.
* Downgrade some logs.
* Fixing the default for vlm.
* Don't enable prefix caching on VLM just yet.
* Change `add_special_tokens` in order to have the correct tokens for chat
input and not (since it's super important with the prefixing now)
* Fixing prefix caching for flashdecoding.
* Update all models.
* Fixed flashinfer version.
* add_special_tokens is internal only
* Fixing seqlen with the new vlms.
* Fixing the issue with `add_special_tokens` not being passed around.
* Fixing the test.
* Removing encoder_decoder (seq2seq).
* Update the chat test.
* Fixing the batching tokenization in flash causal lm.
* Truncating left for radix purposes.
* Oops this doesn't belong here.
* Put back default pure shell.
* Update server tests
- Default to throughput test in k6
- Use TGI_WIGGLE_ROOM to adjust wiggle room
* Only n_heads / process_group.size() are necessary.
* Revert the integrationt tests change (seem linked to head_size
modification).
* Adding error message when assert is violated.
* Fixing the free algorithm to handle times where the common prefix is
smaller.
* Apply suggestions from code review
Co-authored-by: OlivierDehaene <olivier@huggingface.co>
* Update server/text_generation_server/layers/attention/common.py
Co-authored-by: OlivierDehaene <olivier@huggingface.co>
* Fix disabling prefix caching - Fix windowing checks.
* Revert the Cohere tokenizer change (for now using a revision instead).
* Fmt.
---------
Co-authored-by: drbh <david.richard.holtz@gmail.com>
Co-authored-by: OlivierDehaene <olivier@huggingface.co>
* All integration tests back everywhere (too many failed CI).
* Upgrade integration tests after 12.4
* Attempt to remove the specifed compute cap.
* Common arch list.
* Punica uses raw ASM which is not valid on 9.0 apparently.
* Fixing exl2 and other quanize tests again.
* Mark exl2 as non release (so CI tests them, needs to be removed latet).
* Fixing exl2 (by disabling cuda graphs)
* Fix quantization defaults without cuda graphs on exl2 (linked to new
issues with it).
* Removing serde override.
* Go back to released exl2 and remove log.
* Adding warnings for deprecated bitsandbytes + upgrade info to warn.
* Fix GPTQ autotune data type to be compatible with Torch 2.4.0
* Update poetry lock file
* Fix small PaliGemma logprob differences after the torch update
Deepseek V2 is a MoE model from Deepseek. Relevant variations
compared to other models:
- Grouped top-K in expert selection.
- mscale in yarn is calculated using the `mscale` and `mscale_all_dim`
configuration options.
- `mscale_all_dim` is also used in scaling attention softmax.
- Permuting of the query/key representations before applying rotary
embeddings.
- Some projections cannot be sharded (`q_a_proj`, `kv_a_proj_with_mqa`).
So, we need weight loads that supports quantized weights. To this
end `{Weights,WeightLoader}.get_weight` was added.
- The query/key head dimensionality differs from that of the value,
so we need to pad during attention.
- Heads with size 192, needs an extension to our paged attention
fork and we need to ensure that the KV cache is allocated with the
correct size.
- Shared experts.
* Improve the handling of quantized weights
Handling of quantized weights was split between two mechanisms:
- For quantized checkpoints, we used the new weight loader
infrastructure.
- For quantization while loading (EETQ, FP8, bitsandbytes) we
instead relied on conditional in `get_linear`.
Weight loaders support context managers to selectively load
particular layers with different weight loaders, which is useful
for models like Idefics2 AWQ, which uses a quantized text model,
but unquantized vision and connector models. However, the context
manager would be overrided by `get_linear`, which string-checks
`quantizer`. Also, the context manager would not work with
EETQ, FP8, and bitsandbytes.
This change migrates all quantizers to the weight loader infrastructure.
This has several benefits:
- We can use context managers with all quantizers.
- All the implementation details move down to the quantizer layers,
`get_linear` does not need to know how to handle quantizer linear
layers.
- All quantizer weights are strongly typed, we don't pass around
raw tensors.
- We don't have to pass around the `quantizer` string everywhere.
* Exclude non-MLP layers when using FP8 quantization with Llama
* feat: simple mistral lora integration tests
* fix: include args in docker launcher
* fix: disable cuda graphs with lora and warn
* fix: adjust docs and precommit issues
* fix: re update docs
* Add more representative Llama GPTQ test
The Llama GPTQ test is updated to use a model with the commonly-used
quantizer config format and activation sorting. The old test is
kept around (but renamed) since it tests the format produced by
`text-generation-server quantize`.
* Add support for manually triggering a release build
* Refactor dead code.
* First working step.
* Remove a lot of duplicated code.
* More dead code.
* More cleanup.
* Fix Santacoder test.
* Fixing the simple tests.
* Fixing sharding.
* Fixes for VLM.
* Fixing santacoder (num_kv_heads hardcoded).
* Removing more dead code.
* Fixing `config.n_head`.
* Stopping earlier because of `<end_of_utterance>` in idefics2.
* Addresses comments.
* Removing the dead code.
* Fuse back mistral into FlashCausalLM.
* Finish removal.
* Fixing docs + causal_lm `batch_class`.
* Fixing docs + causal.lm.
* Add default to Gemma Causality.
* Default value for gemma/gemma2.
* Wrong default.
GPTQ-Marlin is currently the best-performing kernel for GPTQ models. So
let's use it by default if the kernels are installed, the GPU supports
it, and the kernels support the configuration.
For models generated by `text-generation-server quantize`, use
`sym=False`. This subcommand symmetric quantization since the beginning
and incorrectly reporting the model to be symmetric will use
GPTQ-Marlin (which does not support asymmetric quantization).
Before this change, the number of reserved image tokens was not the
same as the number of images. Fixes#2029.
While at it, also remove all the image token handling duplication
in `prepare_input`.
* Add pytest release marker
Annotate a test with `@pytest.mark.release` and it only gets run
with `pytest integration-tests --release`.
* Mark many models as `release` to speed up CI
* New runner. Manual squash.
* Network host.
* Put back trufflehog with proper extension.
* No network host ?
* Moving buildx install after tailscale ?
* 1.79
When a batch contained images if different sizes during prefill, the
server would fail (see e.g. #2056). Images were processed separately and
then concatenated. However, this can fail for images with different sizes.
Fix this by preprocessing all images in the batch together, so that the
image processor can ensure that all image tensors have compatible sizes.
Add support for GPTQ Marlin kernels
GPTQ Marlin extends the Marlin kernels to support common GPTQ
configurations:
- bits: 4 or 8
- groupsize: -1, 32, 64, or 128
- desc_act: true/false
Using the GPTQ Marlin kernels requires repacking the parameters in the
Marlin quantizer format.
The kernels were contributed by Neural Magic to VLLM. We vendor them
here for convenience.
This change adds support for Marlin-quantized models. Marlin is an
FP16xINT4 matmul kernel, which provides good speedups decoding batches
of 16-32 tokens. It supports quantized models with symmetric
quantization, groupsize -1 or 128, and 4-bit.
Tested with:
- Llama 2
- Llama 3
- Phi 3
This test fails somewhat regularly due to non-determinism and this
test is primarily to verify that we are loading a model which doesn't
have `float16` as the default dtype correctly.
Mostly straightforward, changes to existing code:
* Wrap quantizer parameters in a small wrapper to avoid passing
around untyped tuples and needing to repack them as a dict.
* Move scratch space computation to warmup, because we need the
maximum input sequence length to avoid allocating huge
scratch buffers that OOM.
Two issues:
1. When one of the stdout/stderr pipe buffers of a process started
with `subprocess.Popen` is full, the process can get blocked until
the buffer is drained.
2. Calling `Popen.wait` can deadlock when called before draining
the pipe buffers (if they are full).
This avoids the issue altogether by giving the child process a
temporary file to write to.
Daniël de Kok