It was only used by the older blockchain_storage.
We also move the code to the calling blockchain level, to avoid
replicating the code in every DB implementation. This also makes
the get_random_out method obsolete, and we delete it.
Pros:
- smaller on the blockchain
- shorter integrated addresses
Cons:
- less sparseness
- less ability to embed actual information
The boolean argument to encrypt payment ids is now gone from the
RPC calls, since the decision is made based on the length of the
payment id passed.
A payment ID may be encrypted using the tx secret key and the
receiver's public view key. The receiver can decrypt it with
the tx public key and the receiver's secret view key.
Using integrated addresses now cause the payment IDs to be
encrypted. Payment IDs used manually are not encrypted by default,
but can be encrypted using the new 'encrypt_payment_id' field
in the transfer and transfer_split RPC calls. It is not possible
to use an encrypted payment ID by specifying a manual simplewallet
transfer/transfer_new command, though this is just a limitation
due to input parsing.
If there's no blocks in database (m_height == 0):
Don't assign incorrect block range to check.
Skip average block size check.
Test:
Run blockchain_converter with an existing source blockchain.bin and
a non-existent LMDB destination database.
The converter creates a BlockchainLMDB instance with zero height, due to
not being initialized with a genesis block, normally done by
Blockchain::init(). While different than the behavior of bitmonerod,
blockchain_import, and blockchain_export, the initialization hasn't been
strictly necessary.
The db batch size estimation normally uses an average block size, or a
default minimum block size, whichever is greater. In this case, as
there's no existing blocks to check for an average block size, the
default should be used.
It should avoid a lot of the issues sending more than half the
wallet's contents due to change.
Actual output selection is still random. Changing this would
improve the matching of transaction amounts to output sizes,
but may have non obvious effects on blockchain analysis.
Mapped to the new transfer_new command in simplewallet, and
transfer uses the existing algorithm.
To use in RPC, add "new_algorithm: true" in the transfer_split
JSON command. It is not used in the transfer command.
boost doesn't support %zu for size_t, and the previous change
to %u could technically lose bits (though it would require splitting
a transfer into 4 billion transactions, which seems unlikely).
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
fd73d9c Check and resize if needed at batch transaction start (warptangent)
f9e4afd blockchain_utilities: Increase debug statement's log level (warptangent)
699e4b3 blockchain_utilities: Pass expected number of blocks when starting batch (warptangent)
6e170c8 Optionally allow DB to know expected number of blocks at batch transaction start (warptangent)
This currently only affects blockchain_import and blockchain_converter.
When the number of blocks expected for the batch transaction is
provided, make an estimate of the DB space needed. If not enough free
space remains, resize the DB.
The estimate is made based on:
- the average size of the last 500 blocks, or if larger, a min. block
size of 4k
- a factor for the expanded size a block occupies in the DB across the
sub-dbs/tables
- a safety factor (1.7) to allow for a "reasonable" average block size
increase over the batch
Increase the DB size by whichever is greater: the estimated size needed
or a minimum increase size, currently 128 MB.
The conservative factors in the estimate help in testing that the resize
occurs when needed, and without gratuitous size increases. For common
use, the safety factor and minimum increase size could reasonably be
increased.
For testing, setting DEFAULT_MAPSIZE (blockchain_db/lmdb/db_lmdb.h) to 1
<< 27 (128 MB) and recompiling will ensure DB resizes take place sooner
and more frequently.
dc4dbc1 simplewallet: allow creating a wallet from a public address and view secret key (moneromooo-monero)
6a0f61d account: allow creating an account from a public address and view secret key (moneromooo-monero)
e05a58a wallet2: fix write_watch_only_wallet comment description (moneromooo-monero)
4bf6f0d simplewallet: forbid seed commands for watch only wallets (moneromooo-monero)
It uses the async console handler differently than simplewallet,
and wasn't running the same exit code, causing it to never actually
exit after breaking out of the console entry loop.
The new save_watch_only saves a copy of the keys file without the
spend key. It can then be given away to be used as a normal keys
file, but with no spend ability.
Sends all the dust to your own wallet. May fail (if the fee required
is more than the dust total). May end up paying most of the dust in fees.
Unlocked dust total is now also displayed in "balance".
5680604 Replace hardcoded value with existing constant of same value (warptangent)
f37ee2f Update database resize behavior (warptangent)
f85cd8e Include database error in more error messages (warptangent)
Replace --set_log with --log-level for consistency.
Show default log level in usage.
Add --log-file for specifying log file path.
Document log file path.
Display log file path at startup.
As with display of seed, don't log view key and spend key.
Includes:
- display of viewkey at wallet creation
- "viewkey" command output
- "spendkey" command output
Add fix for compile error with multiple uses of peerid_type (uint64_t)
variable in lambda expression.
- known GCC issue: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65843
epee: replace return value of nullptr for expected boolean with false.
Fixes#231.
The random selection of a node shouldn't favor repeats that occur in the
hardcoded and DNS seed node lists.
Remove hardcoded ":18080" address which gives parse error.
Test: bitmonerod --log-level 2
The seed node list displayed at startup shouldn't show duplicate
addresses (includes port).
Based on tewinget's update.
Make OpenAlias address format independent of existing DNS functions.
Add tests.
Test:
make debug-test
cd build/debug/tests/unit_tests
# test that regular DNS functions work, including IPv4 lookups.
# also test function that converts OpenAlias address format
make && ./unit_tests --gtest_filter=DNSResolver*
# test that OpenAlias addresses like donate@getmonero.org work from
# wallet tools
make && ./unit_tests --gtest_filter=AddressFromURL.Success
Add public method blockchain_storage::debug_pop_block_from_blockchain()
Ensure blockchain_import calls destructors before exit.
To test:
DATABASE=memory make release
// create blockchain.bin from blockchain.raw if needed
build/release/bin/blockchain_import --block-stop 1000
// try popping a single block
build/release/bin/blockchain_import --pop-blocks 1
Some filesystems (*cough* NTFS *cough*) aren't good with sparse files,
so this makes LMDB dynamically resize its mapsize as needed. Note: the
check interval is currently every 10 blocks (for testing) and will
probably need to change to 1000 or something. Default mapsize set to
1GiB.
Blockchain conversion tools using batching will probably segfault, I'll
fix that in the next commit.
Remove repeated coinbase tx in each exported block's data.
Add resume from last exported height to blockchain_export, making it the
default behavior when the file already exists.
Start reorganizing the utilities.
Various cleanup.
Update output, including referring to both height and block numbers as
zero-based instead of one-based. This better matches the block data,
rather than just some parts of the existing codebase.
Use smaller default batch sizes for importer when verifying, so progress
is saved more frequently.
Use small default batch size (1000) for importer on Windows, due to
current issue with big transaction sizes on LMDB.
file format
-----------
[4-byte magic | variable-length header | block data]
header
------
4-byte file_info length
file_info struct
file format major version
file format minor version
header length (includes file_info struct)
[rest of header, padded with 0 bytes up to header length]
block data
----------
4-byte chunk/block_package length
block_package struct
block
txs (coinbase/miner tx included already in block)
block_size
cumulative_difficulty
coins_generated
4-byte chunk/block_package length
block_package struct
[...]
7d8acd1 explicitly disable AES on ARM (Riccardo Spagni)
4222b37 add arm6 target and flags (Riccardo Spagni)
5675325 new makefile targets for static builds (Riccardo Spagni)
9519526 Only compile BerkeleyDB as an option in non-static (Thomas Winget)
7b14d4a Steps toward multiple dbs available -- working (Thomas Winget)
dbdcf11 blockchain_converter: Add support for resume from last block (warptangent)
4880803 blockchain_import: lengthen string for line clear (warptangent)
7476d2e blockchain_export: show progress during export (warptangent)
4bedd68 Update Blockchain::get_db() to return reference instead of pointer (warptangent)
0386e99 Add README for blockchain converter, importer, and exporter utilities (warptangent)
ead7fad BerkeleyDB implementation of BlockchainDB seems to be working! (Thomas Winget)
ffadb65 blockchain_export: Add compile-time support for BlockchainDB (warptangent)
f6cbfb6 Add blockchain_export utility (warptangent)
275cbd4 Add support for database open with flags (warptangent)
cb862cb Add mdb_flags variable to LMDB database open (warptangent)
260cc56 Add blockchain_import utility (warptangent)
ca75b47 Blockchain: add get_db() accessor, needed for blockchain_import (warptangent)
a3dd9d1 blockchain_converter: Add support for batch transactions (warptangent)
acb5d29 Update and relocate comment that applies class wide (warptangent)
bd9da6d Merges #33 (Thomas Winget)
6e9e8ab Move db_drivers/ to external/ (Thomas Winget)
56a1bf5 fixed BUILD_64 option (Riccardo Spagni)
c97a685 fixed arch_width option (Riccardo Spagni)
3a3c07c fixed msys2 / mingw folders based on architecture, added license to unbound CMakeList as that is not part of standard Unbound (Riccardo Spagni)
3b3da86 moved 32-bit/64-bit detection into main CMakeLists (Riccardo Spagni)
a0cbf73 removed findlmdb.cmake, no longer required (Riccardo Spagni)
0e8bbdb 32-bit LMDB, removed check for in-system LMDB as it is consensus-critical (Riccardo Spagni)
11e8157 Revert "Moved db_drivers/ into external/ for consistency" (Thomas Winget)
daf2a8f Revert "Build fixed, goofed up some CMake" (Thomas Winget)
e146027 BlockchainBDB passes unit tests (Thomas Winget)
43477b7 BerkeleyDB Blockchain building, not working yet (Thomas Winget)
cade0da CMake wiring, minor cleanup, minor test addition (Thomas Winget)
1bc8939 BerkeleyDB BlockchainDB impl copy/paste/modify (Thomas Winget)
5112dc3 Try to not pollute cryptonote namespace (Thomas Winget)
edef0bb Initial commit of BDB BlockchainDB implementation (Thomas Winget)
eee3ee7 BlockchainDB implementations have names now (Thomas Winget)
5d2a2b7 Fixed includes in BlockchainDB unit tests (Thomas Winget)
8b82f3c Build fixed, goofed up some CMake (Thomas Winget)
b213356 Moved db_drivers/ into external/ for consistency (Thomas Winget)
5eab480 Moved BlockchainDB into its own src/ subfolder (Thomas Winget)
0ad0784 Changed log level of debug message -- too spammy (Thomas Winget)
6485dac BlockchainLMDB: Add profiling to tx_exists() (warptangent)
83fb6d8 BlockchainLMDB: Add batch transaction support to tx_exists() (warptangent)
8529c0e BlockchainDB, BlockchainLMDB: Add profiling for DB commits (warptangent)
7a66b8b BlockchainDB: Add virtual function declarations for batch transactions (warptangent)
b7a2d84 BlockchainLMDB: Add check for open database to two functions (warptangent)
58ecc58 BlockchainLMDB: Add support for batch transactions (warptangent)
8909d7d Improve block and tx processing efficiency by less repeat hashing (warptangent)
3676ac5 Add profiling to block and tx processing (warptangent)
ce71abd Move LMDB storage to subfolder (warptangent)
42f8fe5 Fix formatting (warptangent)
aa82f78 Fix log statement (warptangent)
26873db Remove unused variable (warptangent)
4b90fd3 Add log statement (warptangent)
2531aa3 Add and extend log statements (warptangent)
59305d3 Blockchain: match original function declaration from blockchain_storage (warptangent)
cd972bd Update year and formatting in license (warptangent)
b88ab64 Fix Blockchain::get_tail_id() to set parameter to last block number instead of height (warptangent)
963bc09 Revert "Bounds error, should fix#27" (warptangent)
6f1c4b4 Bounds error, should fix#27 (Thomas Winget)
84fe5fb Add compile-time support for both db implementations: in-memory and LMDB (warptangent)
8bd1983 Blockchain: reflect log updates from blockchain_storage (warptangent)
7f9b070 Blockchain: reflect log and assert updates from blockchain_storage (warptangent)
70342ec Blockchain: reflect log level of blockchain_storage (warptangent)
c8d27fb Blockchain: reflect assert behavior of blockchain_storage for get_tx_outputs_gindexs() (warptangent)
d00ee78 Update recently added log statement to fix possible null dereference (warptangent)
acd4c36 Should fix std::min issues related to size_t (Thomas Winget)
3488359 Add in-source lmdb to build process (Thomas Winget)
4e45fae Initial import of lmdb source (Thomas Winget)
800d9b9 Remove code previously made unused and marked unused (warptangent)
0840c2f Fix height assertion in Blockchain::handle_alternative_block() (warptangent)
63051be Fix comparison between main and alternate chain's cumulative difficulty. (warptangent)
909ea81 Remove a have_block() check so alternate block can be processed (warptangent)
4d0a94b Complete implementation of transaction removal (warptangent)
1701c26 Use block index when obtaining block's difficulty for log statement (warptangent)
4eba21f Fix transfers to support mixins (warptangent)
d045dfa Fix transfers (without mixins) (warptangent)
429a740 throw inline functions need to keep exception type (Thomas Winget)
14555ee Fixes segfault in Blockchain::handle_alternative_block (Thomas Winget)
5086ca1 add BlockchainDB tests to new cmake (Thomas Winget)
c5c100c Obtain tx hash and tx output index from amount and output offset (warptangent)
ad8200a db_lmdb: fix global index calculation off by 1 (moneromooo-monero)
57b80c5 db_lmdb: remove redundant checks (moneromooo-monero)
1362846 blockchain_converter: add --testnet for converting testnet blockchain (moneromooo-monero)
c50cd95 Fixes a bug with getting output metadata from BlockchainDB (Thomas Winget)
c3fa07b update comments to reflect changed code (Thomas Winget)
59d2b0e db_lmdb: do not give the group database write permissions (moneromooo-monero)
4c2a452 db_lmdb: catch attempt to remove block from an empty blockchain (moneromooo-monero)
3a3459d db_lmdb: factor all the log+throw code paths (moneromooo-monero)
3fcb8da db_lmdb: factor the MDB_val setup code (moneromooo-monero)
609cf7f blockchain_converter: a bit more user friendly output (moneromooo-monero)
2b9f737 blockchain_converter: only call data path function once (moneromooo-monero)
1860658 blockchain: do not append "testnet" to the data directory (moneromooo-monero)
1c578ad db_lmdb: remove block timestamp too when removing a block (moneromooo-monero)
c93a186 db_lmdb: do not cast const away (moneromooo-monero)
198368b blockchain: fix wallet syncing from scratch (moneromooo-monero)
1d23db2 db_lmdb: do not keep a dangling pointer to stack objects (moneromooo-monero)
29b5876 db_lmdb: make cursor internal members private (moneromooo-monero)
a3157d7 blockchain_storage: refactor genesis block creation (moneromooo-monero)
8e41b1e blockchain_storage: add consts where appropriate (moneromooo-monero)
98bdadc blockchain_converter: delete blockchain on succesful exit (moneromooo-monero)
256162f checkpoints: add consts where appropriate (moneromooo-monero)
b7270ab blockchain: add consts where appropriate (moneromooo-monero)
23f3cb4 blockchain_db: add consts where appropriate (moneromooo-monero)
10fd6ca blockchain_db: factor some exception code (moneromooo-monero)
11129b9 blockchain_converter: use the actual blockchain location (moneromooo-monero)
0886183 build: add liblmdb to the cmake autodetection system (moneromooo-monero)
215e63b extraneous semicolon in Blockchain::complete_timestamps_vector (Thomas Winget)
8e1b7e2 raised maximum mapsize for lmdb to ~16GB (Thomas Winget)
6c8b8ac more blockchain height-related fixes, syncing other nodes code this time (Thomas Winget)
9455e0c ~ didn't work, need hard path. debug print. (Thomas Winget)
4af0918 very, VERY primitive blockchain converter (Thomas Winget)
26a7db3 add new checkpointing behavior to Blockchain class (Thomas Winget)
767aac2 Remove unused dependency (Thomas Winget)
006e106 Store output pubkeys separately, bug fixes (Thomas Winget)
ab7951d Minor bugfixes, redundancy removal (Thomas Winget)
71b18d7 moar bug fixes, removed debug prints (Thomas Winget)
0915913 BlockchainLMDB seems to be working*! (Thomas Winget)
1a546e3 some bug fixes, but still needs work (Thomas Winget)
006afe2 Minor bug fixes and debug prints (Thomas Winget)
90f402e minor fixes to Blockchain.cpp (Thomas Winget)
74a1a89 Integrate BlockchainDB into cryptonote_core (Thomas Winget)
d8c570b All LMDB BlockchainDB implemented, not tested (Thomas Winget)
e47e343 LMDB blockchain: remove outputs and spent keys (Thomas Winget)
a0af217 Adding block data to LMDB BlockchainDB coded (Thomas Winget)
db00ce0 Parts of LMDB impl of BlockchainDB done and working (Thomas Winget)
1240cf8 BlockchainDB unit tests, lmdb linker flag (Thomas Winget)
b98b964 Initial commit of lmdb BlockchainDB impl (Thomas Winget)
bc44bc1 Initial commit of BlockchainDB tests, other misc (Thomas Winget)
90d6f8b Adding libglim as an external library (Thomas Winget)
07733f9 update new blockchain to build with new changes (Thomas Winget)
1ffbeb2 stupid past me, fixing typos and shit... (Thomas Winget)
67515b8 missing typedef (Thomas Winget)
aba548c import of BlockchainDB files (Thomas Winget)
Due to a bug in unbound, we were passing a string containing a null
character to ub_ctx_resolvconf and ub_ctx_hosts rather than a NULL
pointer. On *nix this wasn't causing headache, but on Windows this was
causing unbound to not correctly load DNS settings from the OS.
Note on the bug: in a Windows-specific code branch in the function
ub_ctx_hosts(), if the hosts file specified was a NULL pointer, a call
to getenv() was stored in a local char* and later freed. This is
incorrect, as we do not own that data, and caused the program to crash.
Daemon interactive mode is now working again.
RPC mapped calls in daemon and wallet have both had connection_context
removed as an argument as that argument was not being used anywhere.
b43716c Do store transaction's blob size in transaction_chain_entry (Sergey Kazenyuk)
3be518f Use single get_transaction_hash to get both id and blob size (Sergey Kazenyuk)
There will need to be some more refactoring for these changes to be
considered complete/correct, but for now it's working.
new daemon cli argument "--db-type", works for LMDB and BerkeleyDB.
A good deal of refactoring is also present in this commit, namely
Blockchain no longer instantiates BlockchainDB, but rather is passed a
pointer to an already-instantiated BlockchainDB on init().
DNSSEC is now implemented with the hardcoded key from unbound.
This will need to be not hardcoded in the future, but is okay for now.
Unit tests updated for DNSSEC (as well as for the fact that, contrary to
previous assumption, example.com does not have a static IP address).
This allows an LMDB database to be used as the blockchain to export.
Adjust SOURCE_DB in src/blockchain_converter/blockchain_export.h
depending on needs. Defaults to DB_MEMORY.
DB_MEMORY is a sensible default for users migrating to LMDB, as it
allows the exporter to use the in-memory blockchain while the other
binaries work with LMDB, without recompiling anything.
Everything except actually *using* BlockchainBDB is wired up, but the db
itself is not yet working. Some error about user mem not large enough.
I think I know what this error means, but I can't determine the cause.
Notes: BerkeleyDB does not allow 0-indexing in its recno type databases,
so block numbers *in the database* will be 1-indexed. Modifications
to indexing have been made as needed.
LMDB implementation code copy/paste/modified into the Berkeley DB
implementation. Need to test if it builds, then if it works, and so on,
but the code is all there.
Add support to:
- BlockchainDB, BlockchainLMDB
- blockchain_import utility to open LMDB database with one or more
LMDB flags.
Sample use:
$ blockchain_import --database lmdb#nosync
$ blockchain_import --database lmdb#nosync,nometasync
This imports to the blockchain database from an exported blockchain
file.
It can be used to bootstrap a new database or to add blocks to an
existing one.
Supports:
- both the in-memory and LMDB implementations
- optional: batching, verification, testnet
See help for usage.
Based on work by tomerkon.
See https://github.com/tomerkon
src/cryptonote_core/bootfileloader.{h,cpp}
Add log level support.
Add testnet support.
Add command-line options:
--help
--data-dir
--testnet-data-dir
--testnet
--log-level
--batch
--batch-size
--block-number
See help for usage. Run at log level 1 to see profiling stats.
In order to make things more general, BlockchainDB now has get_db_name()
which should return a string with the "name" of that type of db.
This "name" will be the subfolder name that holds that db type's files
within the monero folder.
Small bugfix: blockchain_converter was not correctly appending this in
the prior hard-coded-string implementation of the subfolder data
directory concept.
Ostensibly janitorial work, but should be more relevant later down the
line. Things that depend on core cryptonote things (i.e.
cryptonote_core) don't necessarily depend on BlockchainDB and thus
have no need to have BlockchainDB baked in with them.
+toc -doc -drmonero
Fixed the windows path, and improved logging and data
(for graph) logging, fixed some locks and added more checks.
Still there is a locking error,
not added by my patches, but present in master version
(locking of map/list of peers).
This was changed because sometimes the daemon does not complete its exit
routine with this method, but as it does correctly wind most things down
even if it gets stuck I've changed it back.
The RPC calls the daemon executable uses to talk to the running daemon
instance have mostly been added back in. Rate limiting has not been
added in upstream, but is on its way in a separate effort, so those
calls are still NOPed out.
many RPC functions added by the daemonize changes
(and related changes on the upstream dev branch that were not merged)
were commented out (apart from return). Other than that, this *should*
work...at any rate, it builds, and that's something.
new update of the pr with network limits
more debug options:
discarding downloaded blocks all or after given height.
trying to trigger the locking errors.
debug levels polished/tuned to sane values.
debug/logging improved.
warning: this pr should be correct code, but it could make
an existing (in master version) locking error appear more often.
it's a race on the list (map) of peers, e.g. between closing/deleting
them versus working on them in net-limit sleep in sending chunk.
the bug is not in this code/this pr, but in the master version.
the locking problem of master will be fixed in other pr.
problem is ub, and in practice is seems to usually cause program abort
(tested on debian stable with updated gcc). see --help for option
to add sleep to trigger the error faster.
Update of the PR with network limits
works very well for all speeds
(but remember that low download speed can stop upload
because we then slow down downloading of blockchain
requests too)
more debug options
fixed pedantic warnings in our code
should work again on Mac OS X and FreeBSD
fixed warning about size_t
tested on Debian, Ubuntu, Windows(testing now)
TCP options and ToS (QoS) flag
FIXED peer number limit
FIXED some spikes in ingress/download
FIXED problems when other up and down limit
commands and options for network limiting
works very well e.g. for 50 KiB/sec up and down
ToS (QoS) flag
peer number limit
TODO some spikes in ingress/download
TODO problems when other up and down limit
added "otshell utils" - simple logging (with colors, text files channels)
Usage:
default is lmdb for blockchain branch:
$ make release
same as:
$ DATABASE=lmdb make release
for original in-memory implementation:
$ DATABASE=memory make release
Use copied value of seed node index during thread creation, not
reference.
- fixes segfault
Use boost:🧵:try_join_until() instead of an atomic flag result
variable for each thread.
Add and handle interrupt for thread timeout.
- fixes segfault where a thread exceeds requested timeout and tries to
assign results to a referenced, but now out-of-scope, variable in
the main thread.
It expects the total number of blocks of main chain, not last block id
(off-by-one error).
This again behaves like the same height assertion done in original
implementation in blockchain_storage::handle_alternative_block().
This allows a reorganization to proceed after an alternative block has
been added.
difficulty.
This fixes the continual reorganization between a main and alternate
chain, using the same two latest blocks from each.
The check that cumulative difficulty of the alternate chain is bigger
than main's was not using main's last block, but incorrectly using the
passed-in block's previous block. main_chain_cumulative_difficulty was
being used in two different ways. This has been split up to keep use
of main_chain_cumulative_difficulty consistent.
Remove have_block() check from Blockchain::handle_block_to_main_chain().
Add logging to have_block().
This allows blockchain reorganization to proceed further.
have_block() check here causes an error after a blockchain reorganize
begins with error: "Attempting to add block to main chain, but it's
already either there or in an alternate chain."
While reorganizing to become the main chain, a block in the
alternative chain would be refused due to have_block() rightfully
finding it in the alternative chain. The reorganization would end in
rollback, restoring to previous blockchain.
Original implementation didn't call it here, and it doesn't appear
necessary to be called from here in this implementation either. When
needed, it appears it's called prior to handle_block_to_main_chain().
Complete method BlockchainLMDB::remove_output()
- use output index as the key for:
m_output_indices, m_output_txs, m_output_keys
- call new method BlockchainLMDB::remove_amount_output_index()
Add method to remove amount output index.
- BlockchainLMDB::remove_amount_output_index()
- for m_output_amounts
This also fixes the segfault when blockchain reorganization is
attempted.
Use last block id, not number of blocks (off-by-one error).
Fixes error at start of blockchain reorganization: "Attempt to get
cumulative difficulty from height <XXXXXX> failed -- difficulty not in
db"
Implement BlockchainLMDB::get_output_global_index()
- returns global output index for a given amount and amount output
index.
Add information to debug statement for failed ring signature check
within Blockchain::check_tx_inputs()
Fixes bitmonerod RPC call "/getrandom_outs.bin" to return correct
output keys, used in creating a transaction with mixins.
TODO: get_output_global_index() could be refactored with part of
get_output_tx_and_index() as the latter uses the former's
functionality. Keep track of LMDB read transaction.
Fix Blockchain::get_tx_outputs_gindexs() to return amount output
indices.
Implement BlockchainLMDB::get_tx_amount_output_indices() and call it
from the function instead of BlockchainLMDB::get_tx_output_indices()
Previously, Blockchain::get_tx_outputs_gindexs() was instead returning
global output indices, which are internal to LMDB databases.
Allows bitmonerod RPC /get_o_indexes.bin to return the amount output
indices as expected.
Allows simplewallet refresh to set correct amount output indices for
incoming transfers. simplewallet can now construct and send valid
transactions (currently only without mixins).
This is a fix that doesn't require altering the structure of the
current LMDB databases.
TODO:
This can be done more efficiently by adding another LMDB database
(key-value table).
It's not used during regular transaction validation by bitmonerod. I
think it's currently used only or mainly by simplewallet for just its
own incoming transactions. So the current behavior is not a primary
bottleneck.
Currently, it's using the "output_amounts" database, walking through a
given amount's list of values, comparing each one to a given global
output index. The iteration number of the match is the desired result:
the amount output index. This is done for each global output index of
the transaction.
A tx's amount output indices can be stored in various other ways
allowing for faster lookup. Since a tx is only written once, there are
no special future write requirements for its list of indices.
As it is useful for functions calling BlockchainDB functions to know
whether an exception is expected (attempting to get a block that doesn't
exist and counting it missing if not, to save time checking if it
does, for example), the inline functions throw{0,1} need to keep the
exception type information.
Slight comment update due to copy/paste failure.
1b46226 std::atomic_flag has no copy/move constructor, can't have a vector (Thomas Winget)
df53c0a small typo in previous commit (Thomas Winget)
4a53898 DNS seed timeout and fallback (Thomas Winget)
Fixes problem of obtaining incorrect outputs used for tx input.
Reverts to earlier intended behavior that was fixed in previous
commit's split of get_output_tx_and_index into two functions.
Ideally, the log would go in the exception's ctor, but
two log levels are used, so I'd need to specify the level
in the ctor, which isn't great as it's not really related
to the exception.
hard-coded config folder, hard-coded BlockchainDB subclass.
Needs finessing, but should be testable this way.
update for rebase (warptangent 2015-01-04)
fix conflicts with upstream CMakeLists.txt files
src/CMakeLists.txt (edit original commit)
src/blockchain_converter/CMakeLists.txt (add)
There are quite a few debug prints in this commit that will need removed
later, but for posterity (in case someone wants to debug this while I'm
away), I left them in.
Currently errors when syncing on the first block that has a "real"
transaction. Seems to not be able to validate the ring signature, but I
can't for the life of me figure out what's going wrong.
Blockchain and BlockchainLMDB classes now have a debug print at the
beginning of each function at log level 2. These can be removed at any
time, but for now are quite useful.
Blockchain runs, and adds the genesis block just fine, but for some
reason isn't getting new blocks.
Probably needs more looking at -- lot of things were done...in a rushed
sort of way. That said, it all builds and *should* be at least
testable.
update for rebase (warptangent 2015-01-04)
fix conflicts with upstream CMakeLists.txt files
src/CMakeLists.txt (remove edits from original commit)
tests/CMakeLists.txt (remove edits from original commit)
src/cryptonote_core/CMakeLists.txt (edit)
- use blockchain db .cpp and .h files
- add LMDB_LIBRARIES
All of the functionality for the LMDB implementation of BlockchainDB is
implemented, but only what is in tests/unit_tests/BlockchainDB.cpp has
been tested. This is basically add a block, see if you can get the
block and a tx from the block. More tests should be added at some
point.
Still needs testing (and need to write a few more unit tests), but
everything should be there. Lots of unfortunate duplication,
but...well, I can't see a way around it using LMDB.
A couple of other minor changes in this commit, only slightly relevant.
tried rebasing, tree-filter, and many other things. at this point,
the history of these files previous to this can live on
in my bc2 branch, as I'm importing them as-is to here.
simplewallet run without a wallet path argument should prompt again if
an invalid path was entered.
Validity here currently means the string isn't empty.
Allow pre-JSON wallet format to load without depending on existing bin
file.
Don't write bin file while inside keys rewrite, so bin file write
behavior here matches that of regular wallet load.
Fix for simplewallet loading a wallet with a keys file but no bin file.
- this situation previously required a user to restart simplewallet
before it would refresh its blockchain from the server.
f9822c4 wallet JSON update for non-deterministic wallet data (warptangent)
4c6230d Checking and handling for deterministic vs non-deterministic wallet (warptangent)
1beedb9 Extract check for deterministic keys to wallet2::is_deterministic() (warptangent)
359ede3 indentation (warptangent)
2290eff replace lines with call to recently added print_seed() (warptangent)
wallet2::store_keys() and wallet2::load_keys() should only use the JSON
attribute "seed_language" when applicable. That is only for
deterministic wallets.
- store_keys() don't add JSON attribute "seed_language" if
seed_language is empty
- load_keys() don't call set_seed_language if JSON attribute
"seed_language" not present
simple_wallet::seed()
- Check that wallet is deterministic.
simple_wallet::new_wallet()
- Prompt for seed language only if it's a non-deterministic wallet,
along with previous conditions.
simple_wallet::open_wallet()
- Fixed check for deterministic wallet (flag based on command line
non-deterministic argument was used before, but it's inapplicable to
opening an existing wallet).
- As with deterministic wallet, non-deterministic also included to be
rewritten to new JSON format file. That's what's done for newly
generated non-deterministic wallets, so old versions should be
updated to same format.
3300ae5 remove unused display variable (warptangent)
0e0e557 return true on success (warptangent)
2e11eb1 deterministic wallet use of twelve words fixed (warptangent)
21a3c46 ensure that keccak is called on view spend key, not a possibly pre-sc_reduce32 version of it - for deriving view secret key (warptangent)
f1eaf88 Prints seed after wallet upgrade. Removed iostream include. (Oran Juice)
70971be Doxygen comments (Oran Juice)
031ca23 Rewrites to old wallet file correctly (Oran Juice)
1f833dc Doxygen comments in (Oran Juice)
0bd88ff Writes seed language while generating wallet. Wallet open fix. (Oran Juice)
09a659e Stores seed language in wallet file. added rapidjson. Yet to test backward compatibility (Oran Juice)
dde7897 Disable legacy fees for now (iamsmooth)
cc74b43 Remove DEFAULT_FEE, add temporary acceptance of too-small per-kb fee >= 0.1, denominations based on DEFAULT_DUST_THRESHOLD, document fee arg to create_transactions as unused, se DEFAULT_DUST_THRESHOLD for wallet dust collection instead of calcualted tx fee (iamsmooth)
ce71c01 cmake: work around a bug with implicit link directories (Ben Boeckel)
de4fc40 mingw: copy required libraries to the build tree (Ben Boeckel)
ec54e2f cmake: place binaries together in the build tree (Ben Boeckel)
18c56ab msys: don't use LTO (Ben Boeckel)
5680c9c msys: factor out -Werror on msys (Ben Boeckel)
4751542 msys: look in msys' directory for files (Ben Boeckel)
d855fe4 miniupnpc: bump the _POSIX_C_SOURCE feature macro (Ben Boeckel)
c696492 unbound: fix getaddrinfo detection for 32-bit windows (Ben Boeckel)
e377687 cmake: Windows and static builds need this (Ben Boeckel)
01895dd cmake: fix up link lines (Ben Boeckel)
4b6515c unbound: fix type checking (Ben Boeckel)
d43a20f unbound: plumb the libdir up (Ben Boeckel)
7d708e4 cmake: support 2.8.7 (Ben Boeckel)
464c280 cmake: fix up miniupnpc's define (Ben Boeckel)
9689df9 cmake: clean up EXTRA_LIBRARIES (Ben Boeckel)
3b7bdcb cmake: set the project name (Ben Boeckel)
0f0efc4 cmake: prepend to CMAKE_MODULE_PATH (Ben Boeckel)
031e3da cmake: remove scream-make (all-caps functions) (Ben Boeckel)
abbd5c0 unbound: import cmake build system (Ben Boeckel)
e59b5b7 miniupnpc: clean up build system (Ben Boeckel)
475fe20 cmake: minor cleanups (indentation and typos) (Ben Boeckel)
799e8b2 cmake: use option() for STATIC (Ben Boeckel)
c24d22b cmake: clean up if auto-dereferencing (Ben Boeckel)
9ed415a build: inform the build of what generates version.h (Ben Boeckel)
eba180a cmake: support git info in released tarballs (Ben Boeckel)
eeffac6 cmake: fix up BOOST_IGNORE_SYSTEM_PATHS (Ben Boeckel)
a43f1a8 cmake: remove configuration variables (Ben Boeckel)
a87ce09 cmake: factor out error messages (Ben Boeckel)
9aa48b6 miniupnpc: clear out else/endfoo command arguments (Ben Boeckel)
8a86ac8 daemon_tests: update cmake code (Ben Boeckel)
fa3ff75 gtest: support an external gtest (Ben Boeckel)
7bfcffa cmake: put each test executable in its own directory (Ben Boeckel)
f53f047 cmake: handle private vs. public headers (Ben Boeckel)
55ca7d3 cmake: refactor common code with libraries (Ben Boeckel)
c773f46 cmake: refactor common code with executables (Ben Boeckel)
89cff7b cmake: put each library into its own directory (Ben Boeckel)
b94b8cd Added unit test. Fails for Japanese for some reason. (Oran Juice)
4c8a628 Remove iostream header put in during testing (Oran Juice)
9875f5b Variable unique prefix lengths for seed (Oran Juice)
b419075 added hardcoded checkpoint at block 249380 (Riccardo Spagni)
7c1d3b5 fixed miniupnpc dynamic target (Riccardo Spagni)
26728d9 mingw library tweaks (Riccardo Spagni)
2cf94c1 fix for mingw not playing nicely with libunbound configure, fix for correctly finding static libs on various operating systems (Riccardo Spagni)
b05e27f need to link with -ldl on Linux when building statically (Riccardo Spagni)
e55982a set the winsock variable differently on Windows (Riccardo Spagni)
0586a27 fixed configure_command for libunbound under mingw (Riccardo Spagni)
f8fd036 turns out mingw does actually produce .a libs and not .dll.a (Riccardo Spagni)
6be3d1d added bison/yacc static build dependency (Riccardo Spagni)
1afba73 quieten CMake when it can't find packages (Riccardo Spagni)
735a017 removed required flags from miniupnp and unbound (Riccardo Spagni)
6b7ac4b enforce static libraries when building statically (Riccardo Spagni)
1d5991e include openssl in linbunbound static linking, added errors for openssl and expat (Riccardo Spagni)
6ef8ae8 reference the correct unbound static lib (Riccardo Spagni)
23cc93c added libtool's install command (Riccardo Spagni)
409e9ba use the correct CMake variable for static builds (Riccardo Spagni)
3a0b00a build libunbound correctly (Riccardo Spagni)
75a616f fix missing parentheses (Riccardo Spagni)
59172ee build libunbound from external if no local libunbound or for static builds (Riccardo Spagni)
1dee71a added static build dependency instructions to README (Riccardo Spagni)
ff3a766 added static build dependency instructions to README (Riccardo Spagni)
5829b35 include openssl in linbunbound static linking, added errors for openssl and expat (Riccardo Spagni)
c70fa86 reference the correct unbound static lib (Riccardo Spagni)
954a244 added libtool's install command (Riccardo Spagni)
fd52015 use the correct CMake variable for static builds (Riccardo Spagni)
cc0f6a6 build libunbound correctly (Riccardo Spagni)
8c00098 fix missing parentheses (Riccardo Spagni)
cee8747 build libunbound from external if no local libunbound or for static builds (Riccardo Spagni)
add1a60 added static build dependency instructions to README (Riccardo Spagni)
46f26ff another typo fix (David G. Andersen)
ac6bc48 fix typo (David G. Andersen)
d744dd1 More documentation (David G. Andersen)
4d493f6 initial doxygen commenting of the CryptoNight proof-of-work code (David G. Andersen)
c0bdd51 Daemon should now exit on conflicting checkpoints (Thomas Winget)
f0b4138 various changes to runtime checkpoint updating (Thomas Winget)
7568f89 Fixed segfault with checkpoints loading (Thomas Winget)
b261d92 DNS checkpoint updating added, and daemon flag to enforce them (Thomas Winget)
30caebf reload checkpoints file every ~hr and print if any fail (Thomas Winget)
0e14491 updated DNSResolver/things that use it for DNSSEC (Thomas Winget)
6f2c2e1 Adding an identical existing checkpoint should not error (Thomas Winget)
If the "enforce DNS checkpoints" flag is not enabled, it should not exit
if DNS checkpoints conflict with the others, but should still print a
warning to the user.
json checkpoints will be checked every 10 minutes, dns every 60.
json checkpoints always enforced, dns still with flag.
conflicting checkpoints is hard fail, but soft if dns enforce flag not
set and dns checkpoints are wonky.
Bounds checking on blockchain_storage' m_blocks.size() when validating
against checkpoints. Also moved initial json & DNS checkpoints load to
after blockchain init.
The daemon should now check for updated checkpoints from
checkpoints.moneropulse.org as well as from the configured json file
every ~1hr (and on launch).
The daemon now has a flag to enable enforcing these checkpoints (rather
than just printing a warning when they fail).
TODO: an easily configurable list of DNS servers to check for
checkpoints as opposed to the hard-coded "checkpoints.moneropulse.org"
Note: DNSResolver does not yet *use* DNSSEC, but rather this commit is
preparation for including DNSSEC validation. The function in
src/wallet/wallet2.cpp that uses DNSResolver still needs its parameters
updated accordingly.
For checkpoints being read at runtime to work correctly, the checkpoint
add code needs to not return false if a checkpoint is added that already
exists. In this case, instead return false if the checkpoint is for a
height that already has a checkpoint and the hashes are different.
ldns dependency was only still around for constants defined in ldns/rr.h,
but those constants are RFC specified DNS constants, and to reduce deps
have been replicated in dns_utils.h instead of including ldns/rr.h.
Simplewallet should now do a DNS query on an address if it fails to
convert the given string to a binary representation of an address
(base58->binary). It will prompt the user, telling of what the "url"
passed was, what monero address it translated to, and whether or not
DNSSEC validation was a success, and ask for a confirmation that these
are all acceptable.
Also implemented rudimentary IPv6 support, but commented it out because
it's not widely supported by ISPs for now, and thus is not currently
supported by Monero.
CMake config file written, but was unable to test/get it working
properly because of a bug in CMake with functions related to
find_package. Simple "-lunbound" flag used in its stead for now. May
not build on non-Linux systems, not sure yet.
On 32-bit MinGW-w64, time_t is int32_t. The existing code was serializing
time_t directly and implicitly assuming that time_t is int64_t. This commit
formalizes that assumption by serializing int64_t directly and casting to
time_t where appropriate.
Thanks go to greatwolf for reporting this issue.
monero-project/bitmonero#88
bb2b606 fix incorrect error message (obvious cut and paste bug from upstream) (iamsmooth)
6b77e83 Change wallet to not try to extract tx public key when tx has no outputs (fixes 202612 tx format messages and is otherwise correct) (iamsmooth)
08205f0 output rng fix from boolberry (iamsmooth)
if a new block has the same block id as 202612 but the wrong blobdata,
this will tell the caller that the block id is actually null_hash rather
than the 202612 block id.
Since we need to fix tree_hash, but doing so would invalidate the block
id for block 202612, this fix should check to see if we're trying to get
the block id for 202612 (if its blob hash matches) and return the "old"
block id, for backwards compatibility.
time_t is implementation-, architecture-, and apparently
compiler-dependent. As an example, on my machine if I build a 64-bit
binary, sizeof(time_t) is 8, but for a 32-bit binary it's 4. uint64_t
is therefore much more consistent for serialization, given that RPC
calls are potentially made between different machines.
The previous implementation was almost certainly a typo.
full_block_size is the maximum index in the encoded_block_sizes array,
and size is used as an index in this array. So now 1 <= size <=
full_block_size == 8 instead of 1 <= size <= sizeof(full_block_size) ==
size_of(size_t) == ? (maybe 4 on 32-bit systems!)
Per my reading this change makes sense since a subset of the exclusive
peers could be priority peers. Priority peers that are not exclusive
will not get loaded, and priority peers that *are* exclusive will get
special treatment. Prior to this change it looks like priority peers
were silently ignored when exclusive peers were provided.
wallet RPC now uses wallet2::create_transactions and wallet2::commit_tx instead
of wallet2::transfer. This made it possible to add the RPC call /transfer_split, which
will split transactions automatically if they are too large. The old call to
/transfer will return an error stating to use /transfer_split if multiple
transactions are needed to fulfill the request.
1. Added huge pages support and optimized scratchpad twiddling. (credits to dga).
2. Added aes-ni key expansion support.
3. Minor speedup to scratchpad initialization/finalization.
moneromooo-monero