* add test for GOEXPERIMENT=boringcrypto
* fix NebulaCertificate.Sign
Set the PublicKey field in a more compatible way for the tests. The
current method grabs the public key from the certificate, but the
correct thing to do is to derive it from the private key. Either way
doesn't really matter as I don't think the Sign method actually even
uses the PublicKey field.
* assert boring
* cleanup tests
* Support NIST curve P256
This change adds support for NIST curve P256. When you use `nebula-cert ca`
or `nebula-cert keygen`, you can specify `-curve P256` to enable it. The
curve to use is based on the curve defined in your CA certificate.
Internally, we use ECDSA P256 to sign certificates, and ECDH P256 to do
Noise handshakes. P256 is not supported natively in Noise Protocol, so
we define `DHP256` in the `noiseutil` package to implement support for
it.
You cannot have a mixed network of Curve25519 and P256 certificates,
since the Noise protocol will only attempt to parse using the Curve
defined in the host's certificate.
* verify the curves match in VerifyPrivateKey
This would have failed anyways once we tried to actually use the bytes
in the private key, but its better to detect the issue up front with
a better error message.
* add cert.Curve argument to Sign method
* fix mismerge
* use crypto/ecdh
This is the preferred method for doing ECDH functions now, and also has
a boringcrypto specific codepath.
* remove other ecdh uses of crypto/elliptic
use crypto/ecdh instead
This adds a few build targets to compile with `GOEXPERIMENT=boringcrypto`:
- `bin-boringcrypto`
- `release-boringcrypto`
It also adds a field to the intial start up log indicating if
boringcrypto is enabled in the binary.
* build with go1.20
This has been out for a bit and is up to go1.20.4. We have been using
go1.20 for the Slack builds and have seen no issues.
* need the quotes
* use go install
Fixes#8.
`nebula-cert ca` now supports encrypting the CA's private key with a
passphrase. Pass `-encrypt` in order to be prompted for a passphrase.
Encryption is performed using AES-256-GCM and Argon2id for KDF. KDF
parameters default to RFC recommendations, but can be overridden via CLI
flags `-argon-memory`, `-argon-parallelism`, and `-argon-iterations`.
* add calculated_remotes
This setting allows us to "guess" what the remote might be for a host
while we wait for the lighthouse response. For networks that hard
designed with in mind, it can help speed up handshake performance, as well as
improve resiliency in the case that all lighthouses are down.
Example:
lighthouse:
# ...
calculated_remotes:
# For any Nebula IPs in 10.0.10.0/24, this will apply the mask and add
# the calculated IP as an initial remote (while we wait for the response
# from the lighthouse). Both CIDRs must have the same mask size.
# For example, Nebula IP 10.0.10.123 will have a calculated remote of
# 192.168.1.123
10.0.10.0/24:
- mask: 192.168.1.0/24
port: 4242
* figure out what is up with this test
* add test
* better logic for sending handshakes
Keep track of the last light of hosts we sent handshakes to. Only log
handshake sent messages if the list has changed.
Remove the test Test_NewHandshakeManagerTrigger because it is faulty and
makes no sense. It relys on the fact that no handshake packets actually
get sent, but with these changes we would send packets now (which it
should!)
* use atomic.Pointer
* cleanup to make it clearer
* fix typo in example
* firewall: add option to send REJECT replies
This change allows you to configure the firewall to send REJECT packets
when a packet is denied.
firewall:
# Action to take when a packet is not allowed by the firewall rules.
# Can be one of:
# `drop` (default): silently drop the packet.
# `reject`: send a reject reply.
# - For TCP, this will be a RST "Connection Reset" packet.
# - For other protocols, this will be an ICMP port unreachable packet.
outbound_action: drop
inbound_action: drop
These packets are only sent to established tunnels, and only on the
overlay network (currently IPv4 only).
$ ping -c1 192.168.100.3
PING 192.168.100.3 (192.168.100.3) 56(84) bytes of data.
From 192.168.100.3 icmp_seq=2 Destination Port Unreachable
--- 192.168.100.3 ping statistics ---
2 packets transmitted, 0 received, +1 errors, 100% packet loss, time 31ms
$ nc -nzv 192.168.100.3 22
(UNKNOWN) [192.168.100.3] 22 (?) : Connection refused
This change also modifies the smoke test to capture tcpdump pcaps from
both the inside and outside to inspect what is going on over the wire.
It also now does TCP and UDP packet tests using the Nmap version of
ncat.
* calculate seq and ack the same was as the kernel
The logic a bit confusing, so we copy it straight from how the kernel
does iptables `--reject-with tcp-reset`:
- https://github.com/torvalds/linux/blob/v5.19/net/ipv4/netfilter/nf_reject_ipv4.c#L193-L221
* cleanup
* Add nss-lookup to the systemd wants to ensure DNS is running before starting nebula
* Add Ansible & example service scripts
* Fix#797
* Align Ansible scripts and examples
Co-authored-by: John Maguire <contact@johnmaguire.me>
Nate Brown