This change fixes a rare bug where initial /syncs would fail with a
`KeyError` under the following circumstances:
1. A user fast joins a remote room.
2. The user is kicked from the room before the room's full state has
been synced.
3. A second local user fast joins the room.
4. Events are backfilled into the room with a higher topological
ordering than the original user's leave. They are assigned a
negative stream ordering. It's not clear how backfill happened here,
since it is expected to be equivalent to syncing the full state.
5. The second local user leaves the room before the room's full state
has been synced. The homeserver does not complete the sync.
6. The original user performs an initial /sync with lazy_load_members
enabled.
* Because they were kicked from the room, the room is included in
the /sync response even though the include_leave option is not
specified.
* To populate the room's timeline, `_load_filtered_recents` /
`get_recent_events_for_room` fetches events with a lower stream
ordering than the leave event and picks the ones with the highest
topological orderings (which are most recent). This captures the
backfilled events after the leave, since they have a negative
stream ordering. These events are filtered out of the timeline,
since the user was not in the room at the time and cannot view
them. The sync code ends up with an empty timeline for the room
that notably does not include the user's leave event.
This seems buggy, but at least we don't disclose events the user
isn't allowed to see.
* Normally, `compute_state_delta` would fetch the state at the
start and end of the room's timeline to generate the sync
response. Since the timeline is empty, it fetches the state at
`min(now, last event in the room)`, which corresponds with the
second user's leave. The state during the entirety of the second
user's membership does not include the membership for the first
user because of partial state.
This part is also questionable, since we are fetching state from
outside the bounds of the user's membership.
* `compute_state_delta` then tries and fails to find the user's
membership in the auth events of timeline events. Because there
is no timeline event whose auth events are expected to contain
the user's membership, a `KeyError` is raised.
Also contains a drive-by fix for a separate unlikely race condition.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Revert "Fix registering a device on an account with lots of devices (#15348)"
This reverts commit f0d8f66eaa.
* Revert "Delete stale non-e2e devices for users, take 3 (#15183)"
This reverts commit 78cdb72cd6.
If enabled, for users which are exclusively owned by an application
service then the appservice will be queried for devices in addition
to any information stored in the Synapse database.
Previously, we would spin in a tight loop until
`update_state_for_partial_state_event` stopped raising
`FederationPullAttemptBackoffError`s. Replace the spinloop with a wait
until the backoff period has expired.
Signed-off-by: Sean Quah <seanq@matrix.org>
This should help reduce the number of devices e.g. simple bots the repeatedly login rack up.
We only delete non-e2e devices as they should be safe to delete, whereas if we delete e2e devices for a user we may accidentally break their ability to receive e2e keys for a message.
* Fix joining rooms you have been unbanned from
Since forever synapse did not allow you to join a room after you have
been unbanned from it over federation. This was not actually because of
the unban event not federating. Synapse simply used outdated state to
validate the join transition. This skips the validation if we are not in
the room and for that reason won't have the current room state.
Fixes#1563
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
* Add changelog
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
* Update changelog.d/15323.bugfix
---------
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
Experimental support for MSC3983 is behind a configuration flag.
If enabled, for users which are exclusively owned by an application
service then the appservice will be queried for one-time keys *if*
there are none uploaded to Synapse.
This makes it so that we rely on the `device_id` to delete pushers on logout,
instead of relying on the `access_token_id`. This ensures we're not removing
pushers on token refresh, and prepares for a world without access token IDs
(also known as the OIDC).
This actually runs the `set_device_id_for_pushers` background update, which
was forgotten in #13831.
Note that for backwards compatibility it still deletes pushers based on the
`access_token` until the background update finishes.
When a room is deleted in Synapse we remove the event forward
extremities in the room, so if (say a bot) tries to send a message into
the room we error out due to not being able to calculate prev events for
the new event *before* we check if the sender is in the room.
Fixes#8094
* Scaffolding for background process to refresh profiles
* Add scaffolding for background process to refresh profiles for a given server
* Implement the code to select servers to refresh from
* Ensure we don't build up multiple looping calls
* Make `get_profile` able to respect backoffs
* Add logic for refreshing users
* When backing off, schedule a refresh when the backoff is over
* Wake up the background processes when we receive an interesting state event
* Add tests
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Add comment about 1<<62
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Remove special-case method for new memberships only, use more generic method
* Only collect profiles from state events in public rooms
* Add a table to track stale remote user profiles
* Add store methods to set and delete rows in this new table
* Mark remote profiles as stale when a member state event comes in to a private room
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Simplify by removing Optionality of `event_id`
* Replace names and avatars with None if they're set to dodgy things
I think this makes more sense anyway.
* Move schema delta to 74 (I missed the boat?)
* Turns out these can be None after all
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
It is not necessary to reach out to the database to check some
parameters if the auto-join rooms are not configured, or (in some cases)
if auto-create rooms is not configured.
* Tweak docstring and type hint
* Flip logic and provide better name
* Separate decision from action
* Track a set of strings, not EventBases
* Require explicit boolean options from callers
* Add explicit option for partial state rooms
* Changelog
* Rename param
When pushing events in partial state rooms down incremental /sync, we
try to find the `m.room.member` state event for their senders by digging
through their auth events, so that we can present the membership to the
client. Events usually have a membership event in their auth events,
with the exception of the `m.room.create` event and a user's first join
into the room.
When implementing #13477, we took the case of a user's first join into
account, but forgot to handle the `m.room.create` case. This change
fixes that.
Signed-off-by: Sean Quah <seanq@matrix.org>
It turns out that no clients rely on server-side aggregation of `m.annotation`
relationships: it's just not very useful as currently implemented.
It's also non-trivial to calculate.
I want to remove it from MSC2677, so to keep the implementation in line, let's
remove it here.
* Change `create_room` return type
* Don't return room alias from /createRoom
* Update other callsites
* Fix up mypy complaints
It looks like new_room_user_id is None iff new_room_id is None. It's a
shame we haven't expressed this in a way that mypy can understand.
* Changelog
Previously, when creating a join event in /make_join, we would decide
whether to include additional fields to satisfy restricted room checks
based on the current state of the room. Then, when building the event,
we would capture the forward extremities of the room to use as prev
events.
This is subject to race conditions. For example, when leaving and
rejoining a room, the following sequence of events leads to a misleading
403 response:
1. /make_join reads the current state of the room and sees that the user
is still in the room. It decides to omit the field required for
restricted room joins.
2. The leave event is persisted and the room's forward extremities are
updated.
3. /make_join builds the event, using the post-leave forward extremities.
The event then fails the restricted room checks.
To mitigate the race, we move the read of the forward extremities closer
to the read of the current state. Ideally, we would compute the state
based off the chosen prev events, but that can involve state resolution,
which is expensive.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Update mypy and mypy-zope
* Remove unused ignores
These used to suppress
```
synapse/storage/engines/__init__.py:28: error: "__new__" must return a
class instance (got "NoReturn") [misc]
```
and
```
synapse/http/matrixfederationclient.py:1270: error: "BaseException" has no attribute "reasons" [attr-defined]
```
(note that we check `hasattr(e, "reasons")` above)
* Avoid empty body warnings, sometimes by marking methods as abstract
E.g.
```
tests/handlers/test_register.py:58: error: Missing return statement [empty-body]
tests/handlers/test_register.py:108: error: Missing return statement [empty-body]
```
* Suppress false positive about `JaegerConfig`
Complaint was
```
synapse/logging/opentracing.py:450: error: Function "Type[Config]" could always be true in boolean context [truthy-function]
```
* Fix not calling `is_state()`
Oops!
```
tests/rest/client/test_third_party_rules.py:428: error: Function "Callable[[], bool]" could always be true in boolean context [truthy-function]
```
* Suppress false positives from ParamSpecs
````
synapse/logging/opentracing.py:971: error: Argument 2 to "_custom_sync_async_decorator" has incompatible type "Callable[[Arg(Callable[P, R], 'func'), **P], _GeneratorContextManager[None]]"; expected "Callable[[Callable[P, R], **P], _GeneratorContextManager[None]]" [arg-type]
synapse/logging/opentracing.py:1017: error: Argument 2 to "_custom_sync_async_decorator" has incompatible type "Callable[[Arg(Callable[P, R], 'func'), **P], _GeneratorContextManager[None]]"; expected "Callable[[Callable[P, R], **P], _GeneratorContextManager[None]]" [arg-type]
````
* Drive-by improvement to `wrapping_logic` annotation
* Workaround false "unreachable" positives
See https://github.com/Shoobx/mypy-zope/issues/91
```
tests/http/test_proxyagent.py:626: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:762: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:826: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:838: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:845: error: Statement is unreachable [unreachable]
tests/http/federation/test_matrix_federation_agent.py:151: error: Statement is unreachable [unreachable]
tests/http/federation/test_matrix_federation_agent.py:452: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:60: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:93: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:127: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:152: error: Statement is unreachable [unreachable]
```
* Changelog
* Tweak DBAPI2 Protocol to be accepted by mypy 1.0
Some extra context in:
- https://github.com/matrix-org/python-canonicaljson/pull/57
- https://github.com/python/mypy/issues/6002
- https://mypy.readthedocs.io/en/latest/common_issues.html#covariant-subtyping-of-mutable-protocol-members-is-rejected
* Pull in updated canonicaljson lib
so the protocol check just works
* Improve comments in opentracing
I tried to workaround the ignores but found it too much trouble.
I think the corresponding issue is
https://github.com/python/mypy/issues/12909. The mypy repo has a PR
claiming to fix this (https://github.com/python/mypy/pull/14677) which
might mean this gets resolved soon?
* Better annotation for INTERACTIVE_AUTH_CHECKERS
* Drive-by AUTH_TYPE annotation, to remove an ignore
* Fix order of partial state tables when purging
`partial_state_rooms` has an FK on `events` pointing to the join event we
get from `/send_join`, so we must delete from that table before deleting
from `events`.
**NB:** It would be nice to cancel any resync processes for the room
being purged. We do not do this at present. To do so reliably we'd need
an internal HTTP "replication" endpoint, because the worker doing the
resync process may be different to that handling the purge request.
The first time the resync process tries to write data after the deletion
it will fail because we have deleted necessary data e.g. auth
events. AFAICS it will not retry the resync, so the only downside to
not cancelling the resync is a scary-looking traceback.
(This is presumably extremely race-sensitive.)
* Changelog
* admist(?) -> between
* Warn about a race
* Fix typo, thanks Sean
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
---------
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
...when lazy loading of members is not enabled. It's weird to notify
a client that another user's device list has changed when the client
doesn't think that they share a room.
Note that when a room is un-partial stated, device list updates are
emitted for every member in that room over /sync.
Signed-off-by: Sean Quah <seanq@matrix.org>
Fixes#12801.
Complement tests are at
https://github.com/matrix-org/complement/pull/567.
Avoid blocking on full state when handling a subsequent join into a
partial state room.
Also always perform a remote join into partial state rooms, since we do
not know whether the joining user has been banned and want to avoid
leaking history to banned users.
Signed-off-by: Mathieu Velten <mathieuv@matrix.org>
Co-authored-by: Sean Quah <seanq@matrix.org>
Co-authored-by: David Robertson <davidr@element.io>
It's important that collections returned from `@cached` methods are not
modified, otherwise future retrievals from the cache will return the
modified collection.
This applies to the return values from `@cached` methods and the values
inside the dictionaries returned by `@cachedList` methods. It's not
necessary for the dictionaries returned by `@cachedList` methods
themselves to be read-only.
Signed-off-by: Sean Quah <seanq@matrix.org>
Co-authored-by: David Robertson <davidr@element.io>
The per-room account data is no longer unconditionally
fetched, even if all rooms will be filtered out.
Global account data will not be fetched if it will all be
filtered out.
The previous version of the code could mutate a cached value,
but only if the input requested all devices of a user *and* a specific
device.
To avoid this nonsensical situation we no longer fetch a specific
device ID if all of a user's devices are returned.
Ensure that the list of servers in a partial state room always contains
the server we joined off.
Also refactor `get_partial_state_servers_at_join` to return `None` when
the given room is no longer partial stated, to explicitly indicate when
the room has partial state. Otherwise it's not clear whether an empty
list means that the room has full state, or the room is partial stated,
but the server we joined off told us that there are no servers in the
room.
Signed-off-by: Sean Quah <seanq@matrix.org>
If a sync request does not need to calculate per-room entries &
is not generating presence & is not generating device list data
(e.g. during initial sync) avoid the expensive calculation of room
specific data.
This is a micro-optimisation for clients syncing simply to receive
to-device information.
This expands the previous optimisation from being only for initial
sync to being for all sync requests.
It also inverts some of the logic to be inclusive instead of exclusive.
The `parse_enum` helper pulls an enum value from the query string
(by delegating down to the parse_string helper with values generated
from the enum).
This is used to pull out "f" and "b" in most places and then we thread
the resulting Direction enum throughout more code.
`run_in_background` calls re-use the current logging context. When they
are not awaited, they can complete after the current logging context has
been marked as finished, which leads to log spam. Use
`run_as_background_process` instead.
Fixes one of the instances of #13090.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Perfer `type(x) is int` to `isinstance(x, int)`
This covered all additional instances I could see where `x` was
user-controlled.
The remaining cases are
```
$ rg -s 'isinstance.*[^_]int'
tests/replication/_base.py
576: if isinstance(obj, int):
synapse/util/caches/stream_change_cache.py
136: assert isinstance(stream_pos, int)
214: assert isinstance(stream_pos, int)
246: assert isinstance(stream_pos, int)
267: assert isinstance(stream_pos, int)
synapse/replication/tcp/external_cache.py
133: if isinstance(result, int):
synapse/metrics/__init__.py
100: if isinstance(calls, (int, float)):
synapse/handlers/appservice.py
262: assert isinstance(new_token, int)
synapse/config/_util.py
62: if isinstance(p, int):
```
which cover metrics, logic related to `jsonschema`, and replication and
data streams. AFAICS these are all internal to Synapse
* Changelog
* Batch look-ups to see if rooms are partial stated.
* Fix issues found in linting.
* Fix typo.
* Apply suggestions from code review
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Clarify comments.
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Also improve the cache size while we're at it
* is_partial_state_rooms -> is_partial_state_room_batched
* Run `black`
* Improve annotation for `simple_select_many_batch`
* Fix is_partial_state_room_batched impl
* Okay, _actually_ fix impl
* Update description.
* Update synapse/storage/databases/main/room.py
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Run black.
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
Co-authored-by: David Robertson <davidr@element.io>
Destination was being used incorrectly (a single destination instead
of a list of destinations was being passed).
This also updates some of the types in the area to not use Collection[str],
which is a footgun.
* Allow `AbstractSet` in `StrCollection`
Or else frozensets are excluded. This will be useful in an upcoming
commit where I plan to change a function that accepts `List[str]` to
accept `StrCollection` instead.
* `rooms_to_exclude` -> `rooms_to_exclude_globally`
I am about to make use of this exclusion mechanism to exclude rooms for
a specific user and a specific sync. This rename helps to clarify the
distinction between the global config and the rooms to exclude for a
specific sync.
* Better function names for internal sync methods
* Track a list of excluded rooms on SyncResultBuilder
I plan to feed a list of partially stated rooms for this sync to ignore
* Exclude partial state rooms during eager sync
using the mechanism established in the previous commit
* Track un-partial-state stream in sync tokens
So that we can work out which rooms have become fully-stated during a
given sync period.
* Fix mutation of `@cached` return value
This was fouling up a complement test added alongside this PR.
Excluding a room would mean the set of forgotten rooms in the cache
would be extended. This means that room could be erroneously considered
forgotten in the future.
Introduced in #12310, Synapse 1.57.0. I don't think this had any
user-visible side effects (until now).
* SyncResultBuilder: track rooms to force as newly joined
Similar plan as before. We've omitted rooms from certain sync responses;
now we establish the mechanism to reintroduce them into future syncs.
* Read new field, to present rooms as newly joined
* Force un-partial-stated rooms to be newly-joined
for eager incremental syncs only, provided they're still fully stated
* Notify user stream listeners to wake up long polling syncs
* Changelog
* Typo fix
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Unnecessary list cast
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Rephrase comment
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Another comment
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Fixup merge(?)
* Poke notifier when receiving un-partial-stated msg over replication
* Fixup merge whoops
Thanks MV :)
Co-authored-by: Mathieu Velen <mathieuv@matrix.org>
Co-authored-by: Mathieu Velten <mathieuv@matrix.org>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Faster joins: Update room stats and user directory on workers when done
When finishing a partial state join to a room, we update the current
state of the room without persisting additional events. Workers receive
notice of the current state update over replication, but neglect to wake
the room stats and user directory updaters, which then get incidentally
triggered the next time an event is persisted or an unrelated event
persister sends out a stream position update.
We wake the room stats and user directory updaters at the appropriate
time in this commit.
Part of #12814 and #12815.
Signed-off-by: Sean Quah <seanq@matrix.org>
* fixup comment
Signed-off-by: Sean Quah <seanq@matrix.org>
* Enable Complement tests for Faster Remote Room Joins on worker-mode
* (dangerous) Add an override to allow Complement to use FRRJ under workers
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Fix race where we didn't send out replication notification
* MORE HACKS
* Fix get_un_partial_stated_rooms_token to take instance_name
* Fix bad merge
* Remove warning
* Correctly advance un_partial_stated_room_stream
* Fix merge
* Add another notify_replication
* Fixups
* Create a separate ReplicationNotifier
* Fix test
* Fix portdb
* Create a separate ReplicationNotifier
* Fix test
* Fix portdb
* Fix presence test
* Newsfile
* Apply suggestions from code review
* Update changelog.d/14752.misc
Co-authored-by: Erik Johnston <erik@matrix.org>
* lint
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Co-authored-by: Erik Johnston <erik@matrix.org>
* Avoid clearing out forward extremities when doing a second remote join
When joining a restricted room where the local homeserver does not have
a user able to issue invites, we perform a second remote join. We want
to avoid clearing out forward extremities in this case because the
forward extremities we have are up to date and clearing out forward
extremities creates a window in which the room can get bricked if
Synapse crashes.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Do a full join when doing a second remote join into a full state room
We cannot persist a partial state join event into a joined full state
room, so we perform a full state join for such rooms instead. As a
future optimization, we could always perform a partial state join and
compute or retrieve the full state ourselves if necessary.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Add lock around partial state flag for rooms
Signed-off-by: Sean Quah <seanq@matrix.org>
* Preserve partial state info when doing a second partial state join
Signed-off-by: Sean Quah <seanq@matrix.org>
* Add newsfile
* Add a TODO(faster_joins) marker
Signed-off-by: Sean Quah <seanq@matrix.org>
Currently, we will try to start a new partial state sync every time we
perform a remote join, which is undesirable if there is already one
running for a given room.
We intend to perform remote joins whenever additional local users wish
to join a partial state room, so let's ensure that we do not start more
than one concurrent partial state sync for any given room.
------------------------------------------------------------------------
There is a race condition where the homeserver leaves a room and later
rejoins while the partial state sync from the previous membership is
still running. There is no guarantee that the previous partial state
sync will process the latest join, so we restart it if needed.
Signed-off-by: Sean Quah <seanq@matrix.org>
This has two related changes:
* It enables fast-path processing for an empty filter (`[]`) which was
previously only used for wildcard not-filters (`["*"]`).
* It special cases a `/sync` filter with no-rooms to skip all room
processing, previously we would partially skip processing, but would
generally still calculate intermediate values for each room which were
then unused.
Future changes might consider further optimizations:
* Skip calculating per-room account data when all rooms are filtered (currently
this is thrown away).
* Make similar improvements to other endpoints which support filters.
PKCE can protect against certain attacks and is enabled by default. Support
can be controlled manually by setting the pkce_method of each oidc_providers
entry to 'auto' (default), 'always', or 'never'.
This is required by Twitter OAuth 2.0 support.
OpenID specifies the format of the user info endpoint and some
OAuth 2.0 IdPs do not follow it, e.g. NextCloud and Twitter.
This adds subject_template and picture_template options to the
default mapping provider for more flexibility in matching those user
info responses.
Then adapts calling code to retry when needed so it doesn't 500
to clients.
Signed-off-by: Mathieu Velten <mathieuv@matrix.org>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
This avoids pulling additional state information (and events) from
the database for each item returned in the hierarchy response.
The room type might be out of date until a background update finishes
running, the worst impact of this would be spaces being treated as rooms
in the hierarchy response. This should self-heal once the background
update finishes.
* Declare new config
* Parse new config
* Read new config
* Don't use trial/our TestCase where it's not needed
Before:
```
$ time trial tests/events/test_utils.py > /dev/null
real 0m2.277s
user 0m2.186s
sys 0m0.083s
```
After:
```
$ time trial tests/events/test_utils.py > /dev/null
real 0m0.566s
user 0m0.508s
sys 0m0.056s
```
* Helper to upsert to event fields
without exceeding size limits.
* Use helper when adding invite/knock state
Now that we allow admins to include events in prejoin room state with
arbitrary state keys, be a good Matrix citizen and ensure they don't
accidentally create an oversized event.
* Changelog
* Move StateFilter tests
should have done this in #14668
* Add extra methods to StateFilter
* Use StateFilter
* Ensure test file enforces typed defs; alphabetise
* Workaround surprising get_current_state_ids
* Whoops, fix mypy
This should help reduce the number of devices e.g. simple bots the repeatedly login rack up.
We only delete non-e2e devices as they should be safe to delete, whereas if we delete e2e devices for a user we may accidentally break their ability to receive e2e keys for a message.
A batch of changes intended to make it easier to trace to-device messages through the system.
The intention here is that a client can set a property org.matrix.msgid in any to-device message it sends. That ID is then included in any tracing or logging related to the message. (Suggestions as to where this field should be documented welcome. I'm not enthusiastic about speccing it - it's very much an optional extra to help with debugging.)
I've also generally improved the data we send to opentracing for these messages.
StreamChangeCache.get_all_changed_entities can return None to signify
it does not have information at the given stream position. Two callers (related
to device lists and presence) were treating this response the same as an empty
list (i.e. there being no updates).
This should help reduce the number of devices e.g. simple bots the repeatedly login rack up.
We only delete non-e2e devices as they should be safe to delete, whereas if we delete e2e devices for a user we may accidentally break their ability to receive e2e keys for a message.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Use `device_one_time_keys_count` to match MSC3202
Rename the `device_one_time_key_counts` key in responses to
`device_one_time_keys_count` to match the name specified by MSC3202.
Also change related variable/class names for consistency.
Signed-off-by: Andrew Ferrazzutti <andrewf@element.io>
* Update changelog.d/14565.misc
* Revert name change for `one_time_key_counts` key
as this is a different key altogether from `device_one_time_keys_count`,
which is used for `/sync` instead of appservice transactions.
Signed-off-by: Andrew Ferrazzutti <andrewf@element.io>
Include the thread_id field when sending read receipts over
federation. This might result in the same user having multiple
read receipts per-room, meaning multiple EDUs must be sent
to encapsulate those receipts.
This restructures the PerDestinationQueue APIs to support
multiple receipt EDUs, queue_read_receipt now becomes linear
time in the number of queued threaded receipts in the room for
the given user, it is expected this is a small number since receipt
EDUs are sent as filler in transactions.
This commit adds support for handling a provided avatar picture URL
when logging in via SSO.
Signed-off-by: Ashish Kumar <ashfame@users.noreply.github.com>
Fixes#9357.
This was the last untyped handler from the HomeServer object. Since
it was being treated as Any (and thus unchecked) it was being used
incorrectly in a few places.
When a local device list change is added to
`device_lists_changes_in_room`, the `converted_to_destinations` flag is
set to `FALSE` and the `_handle_new_device_update_async` background
process is started. This background process looks for unconverted rows
in `device_lists_changes_in_room`, copies them to
`device_lists_outbound_pokes` and updates the flag.
To update the `converted_to_destinations` flag, the database performs a
`DELETE` and `INSERT` internally, which fragments the table. To avoid
this, track unconverted rows using a `(stream ID, room ID)` position
instead of the flag.
From now on, the `converted_to_destinations` column indicates rows that
need converting to outbound pokes, but does not indicate whether the
conversion has already taken place.
Closes#14037.
Signed-off-by: Sean Quah <seanq@matrix.org>
Avoid an n+1 query problem and fetch the bundled aggregations for
m.reference relations in a single query instead of a query per event.
This applies similar logic for as was previously done for edits in
8b309adb43 (#11660; threads
in b65acead42 (#11752); and
annotations in 1799a54a54 (#14491).
Avoid an n+1 query problem and fetch the bundled aggregations for
m.annotation relations in a single query instead of a query per event.
This applies similar logic for as was previously done for edits in
8b309adb43 (#11660) and threads
in b65acead42 (#11752).
Remove type hints from comments which have been added
as Python type hints. This helps avoid drift between comments
and reality, as well as removing redundant information.
Also adds some missing type hints which were simple to fill in.
We don't filter state usually, so doing so here is a waste of time. This is not much of an issue for clients that enable lazy loading of members, since there will be fewer state events.
If configured an OIDC IdP can log a user's session out of
Synapse when they log out of the identity provider.
The IdP sends a request directly to Synapse (and must be
configured with an endpoint) when a user logs out.
* Introduce a test for the old behaviour which we want to restore
* Reintroduce the old behaviour in a simpler way
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Use 1 credit instead of 2 for creating a room: be more lenient than before
Notably, the UI in Element Web was still broken after restoring to prior behaviour.
After discussion, we agreed that it would be sensible to increase the limit.
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
1. `federation_client.timestamp_to_event(...)` now handles all `destination` looping and uses our generic `_try_destination_list(...)` helper.
2. Consistently handling `NotRetryingDestination` and `FederationDeniedError` across `get_pdu` , backfill, and the generic `_try_destination_list` which is used for many places we use this pattern.
3. `get_pdu(...)` now returns `PulledPduInfo` so we know which `destination` we ended up pulling the PDU from
Fixes check_avatar_size_and_mime_type() to successfully update avatars on homeservers running on non-default ports which it would mistakenly treat as remote homeserver while validating the avatar's size and mime type.
Signed-off-by: Ashish Kumar ashfame@users.noreply.github.com
This implements a fake OIDC server, which intercepts calls to the HTTP client.
Improves accuracy of tests by covering more internal methods.
One particular example was the ID token validation, which previously mocked.
This uncovered an incorrect dependency: Synapse actually requires at least
authlib 0.15.1, not 0.14.0.
* Show erasure status when listing users in the Admin API
* Use USING when joining erased_users
* Add changelog entry
* Revert "Use USING when joining erased_users"
This reverts commit 30bd2bf106.
* Make the erased check work on postgres
* Add a testcase for showing erased user status
* Appease the style linter
* Explicitly convert `erased` to bool to make SQLite consistent with Postgres
This also adds us an easy way in to fix the other accidentally integered columns.
* Move erasure status test to UsersListTestCase
* Include user erased status when fetching user info via the admin API
* Document the erase status in user_admin_api
* Appease the linter and mypy
* Signpost comments in tests
Co-authored-by: Tadeusz Sośnierz <tadeusz@sosnierz.com>
Co-authored-by: David Robertson <david.m.robertson1@gmail.com>
While https://github.com/matrix-org/synapse/pull/13635 stops us from doing the slow thing after we've already done it once, this PR stops us from doing one of the slow things in the first place.
Related to
- https://github.com/matrix-org/synapse/issues/13622
- https://github.com/matrix-org/synapse/pull/13635
- https://github.com/matrix-org/synapse/issues/13676
Part of https://github.com/matrix-org/synapse/issues/13356
Follow-up to https://github.com/matrix-org/synapse/pull/13815 which tracks event signature failures.
With this PR, we avoid the call to the costly `_get_state_ids_after_missing_prev_event` because the signature failure will count as an attempt before and we filter events based on the backoff before calling `_get_state_ids_after_missing_prev_event` now.
For example, this will save us 156s out of the 185s total that this `matrix.org` `/messages` request. If you want to see the full Jaeger trace of this, you can drag and drop this `trace.json` into your own Jaeger, https://gist.github.com/MadLittleMods/4b12d0d0afe88c2f65ffcc907306b761
To explain this exact scenario around `/messages` -> backfill, we call `/backfill` and first check the signatures of the 100 events. We see bad signature for `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` and `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` (both member events). Then we process the 98 events remaining that have valid signatures but one of the events references `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` as a `prev_event`. So we have to do the whole `_get_state_ids_after_missing_prev_event` rigmarole which pulls in those same events which fail again because the signatures are still invalid.
- `backfill`
- `outgoing-federation-request` `/backfill`
- `_check_sigs_and_hash_and_fetch`
- `_check_sigs_and_hash_and_fetch_one` for each event received over backfill
- ❗ `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` fails with `Signature on retrieved event was invalid.`: `unable to verify signature for sender domain xxx: 401: Failed to find any key to satisfy: _FetchKeyRequest(...)`
- ❗ `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` fails with `Signature on retrieved event was invalid.`: `unable to verify signature for sender domain xxx: 401: Failed to find any key to satisfy: _FetchKeyRequest(...)`
- `_process_pulled_events`
- `_process_pulled_event` for each validated event
- ❗ Event `$Q0iMdqtz3IJYfZQU2Xk2WjB5NDF8Gg8cFSYYyKQgKJ0` references `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` as a `prev_event` which is missing so we try to get it
- `_get_state_ids_after_missing_prev_event`
- `outgoing-federation-request` `/state_ids`
- ❗ `get_pdu` for `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` which fails the signature check again
- ❗ `get_pdu` for `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` which fails the signature check
The callers either set a default limit or manually handle a None-limit
later on (by setting a default value).
Update the callers to always instantiate PaginationConfig with a default
limit and then assume the limit is non-None.
Implement the /threads endpoint from MSC3856.
This is currently unstable and behind an experimental configuration
flag.
It includes a background update to backfill data, results from
the /threads endpoint will be partial until that finishes.
By getting the joined rooms before the current token we avoid any reading
history to confirm a user *was* in a room. We can then use any membership
change events, which we already fetch during sync, to determine the final
list of joined room IDs.
When retrieving counts of notifications segment the results based on the
thread ID, but choose whether to return them as individual threads or as
a single summed field by letting the client opt-in via a sync flag.
The summarization code is also updated to be per thread, instead of per
room.
Keep the old behavior (of including the original_event field) for any
requests to the /unstable version of the endpoint, but do not include
the field when the /v1 version is used.
This should avoid new clients from depending on this field, but will
not help with current dependencies.
Mathieu Velten