Add a (long) timeout to when a "busy" device is considered not online.
This does *not* match MSC3026, but is a reasonable thing for an
implementation to do.
Expands tests for the (unstable) busy presence with multiple devices.
Tracks presence on an individual per-device basis and combine
the per-device state into a per-user state. This should help in
situations where a user has multiple devices with conflicting status
(e.g. one is syncing with unavailable and one is syncing with online).
The tie-breaking is done by priority:
BUSY > ONLINE > UNAVAILABLE > OFFLINE
* Fix rare bug that broke looping calls
We can't interact with the reactor from the main thread via looping
call.
Introduced in v1.90.0 / #15791.
* Newsfile
Refactoring to use both the user ID & the device ID when tracking
the currently syncing users in the presence handler.
This is done both locally and over replication. Note that the device
ID is discarded but will be used in a future change.
Refactoring to pass the device ID (in addition to the user ID) through
the presence handler (specifically the `user_syncing`, `set_state`,
and `bump_presence_active_time` methods and their replication
versions).
Simplify some of the presence code by reducing duplicated code between
worker & non-worker modes.
The main change is to push some of the logic from `user_syncing` into
`set_state`. This is done by passing whether the user is setting the presence
via a `/sync` with a new `is_sync` flag to `set_state`. If this is `true` some
additional logic is performed:
* Don't override `busy` presence.
* Update the `last_user_sync_ts`.
* Never update the status message.
* Properly update retry_last_ts when hitting the maximum retry interval
This was broken in 1.87 when the maximum retry interval got changed from
almost infinite to a week (and made configurable).
fixes#16101
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
* Add changelog
* Change fix + add test
* Add comment
---------
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
Co-authored-by: Mathieu Velten <mathieuv@matrix.org>
If we don't have all the auth events in a room then not all state events will have a chain cover index. Even so, we can still use the chain cover index on the events that do have it, rather than bailing and using the slower functions.
This situation should not arise for newly persisted rooms, as we check we have the full auth chain for each event, but can happen for existing rooms.
c.f. #15245
We were seeing serialization errors when taking out multiple read locks.
The transactions were retried, so isn't causing any failures.
Introduced in #15782.
* Fix the method signature of `run_db_interaction` on the module API
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Misc. clean-ups to:
* Use keyword arguments.
* Return early (reducing indentation) of some functions.
* Removing duplicated / unused code.
* Use wrap_as_background_process.
* Add a module API function to provide `call_later`
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Add comments
* Update version number
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Add a cache invalidation clean-up task
* Run the cache invalidation stream clean-up on the background worker
* Tune down
* call_later is in millis!
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* fixup! Add a cache invalidation clean-up task
* Update synapse/storage/databases/main/cache.py
Co-authored-by: Eric Eastwood <erice@element.io>
* Update synapse/storage/databases/main/cache.py
Co-authored-by: Eric Eastwood <erice@element.io>
* MILLISEC -> MS
* Expand on comment
* Move and tweak comment about Postgres
* Use `wrap_as_background_process`
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Co-authored-by: Eric Eastwood <erice@element.io>
For now this maintains compatible with old Synapses by falling back
to using transaction semantics on a per-access token. A future version
of Synapse will drop support for this.
Adds three new configuration variables:
* destination_min_retry_interval is identical to before (10mn).
* destination_retry_multiplier is now 2 instead of 5, the maximum value will
be reached slower.
* destination_max_retry_interval is one day instead of (essentially) infinity.
Capping this will cause destinations to continue to be retried sometimes instead
of being lost forever. The previous value was 2 ^ 62 milliseconds.
The location of the redacts field changes in room version 11. Ensure
it is copied to the *new* location for *old* room versions for
forwards-compatibility with clients.
Note that copying it to the *old* location for the *new* room version
was previously handled.
The un_partial_stated_event_stream_sequence and
application_services_txn_id_seq were never properly configured
in the portdb script, resulting in an error on start-up.
Signed-off-by: Nicolas Werner <n.werner@famedly.com>
Co-authored-by: Nicolas Werner <n.werner@famedly.com>
Co-authored-by: Nicolas Werner <89468146+nico-famedly@users.noreply.github.com>
Co-authored-by: Hubert Chathi <hubert@uhoreg.ca>
And fix a bug in the implementation of the updated redaction
format (MSC2174) where the top-level redacts field was not
properly added for backwards-compatibility.
Allow configuring the set of workers to proxy outbound federation traffic through (`outbound_federation_restricted_to`).
This is useful when you have a worker setup with `federation_sender` instances responsible for sending outbound federation requests and want to make sure *all* outbound federation traffic goes through those instances. Before this change, the generic workers would still contact federation themselves for things like profile lookups, backfill, etc. This PR allows you to set more strict access controls/firewall for all workers and only allow the `federation_sender`'s to contact the outside world.
**Before:**
```
Error retrieving alias
```
**After:**
```
Error retrieving alias #foo:bar -> 401 Unauthorized
```
*Spawning from creating the [manual testing strategy for the outbound federation proxy](https://github.com/matrix-org/synapse/pull/15773).*
Unix socket support for `federation` and `client` Listeners has existed now for a little while(since [1.81.0](https://github.com/matrix-org/synapse/pull/15353)), but there was one last hold out before it could be complete: HTTP Replication communication. This should finish it up. The Listeners would have always worked, but would have had no way to be talked to/at.
---------
Co-authored-by: Eric Eastwood <madlittlemods@gmail.com>
Co-authored-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Co-authored-by: Eric Eastwood <erice@element.io>
A lot of the functions have the same name in this space like `store_file`,
and we also do it multiple times for different reasons (main media repo,
other storage providers, thumbnails, etc) so it's good to differentiate
them so your head doesn't explode.
Follow-up to https://github.com/matrix-org/synapse/pull/15850
Tracing instrumentation to media `/upload` code paths to investigate https://github.com/matrix-org/synapse/issues/15841
Allow configuring the set of workers to proxy outbound federation traffic through (`outbound_federation_restricted_to`).
This is useful when you have a worker setup with `federation_sender` instances responsible for sending outbound federation requests and want to make sure *all* outbound federation traffic goes through those instances. Before this change, the generic workers would still contact federation themselves for things like profile lookups, backfill, etc. This PR allows you to set more strict access controls/firewall for all workers and only allow the `federation_sender`'s to contact the outside world.
The original code is from @erikjohnston's branches which I've gotten in-shape to merge.
Image.ANTIALIAS is not defined in current pillow releases. Since ANTIALIAS was just using LANCZOS anyways, this is just a cosmetic change, but makes synapse work with most recent pillow releases.
Signed-off-by: Giovanni Harting <539@idlegandalf.com>
Old device entries for the same user were being removed in individual
SQL commands, making the batch take way longer than necessary.
This combines the commands into a single one with a IN/ANY clause.
Example of log entry before the change, regularly observed with
"log_min_duration_statement = 10000" in PostgreSQL's config:
LOG: duration: 42538.282 ms statement:
DELETE FROM device_lists_stream
WHERE user_id = '@someone' AND device_id = 'someid1'
AND stream_id < 123456789
;
DELETE FROM device_lists_stream
WHERE user_id = '@someone' AND device_id = 'someid2'
AND stream_id < 123456789
;
[repeated for each device ID of that user, potentially a lot...]
With the patch applied on my instance for the past couple of days, I
no longer notice overly long statements of that particular kind.
Signed-off-by: pacien <pacien.trangirard@pacien.net>
If you leave a room and forget it, then rejoin it, the room would be
missing from the next initial sync.
fixes#13262
Signed-off-by: Nicolas Werner <n.werner@famedly.com>
The port DB script would try and run database background tasks, which
could fail if the data they acted on was in the process of being ported.
These exceptions were non fatal.
Fixes#15789
We now only block the client to backfill when we see a large gap in the events (more than 2 events missing in a row according to `depth`), more than 3 single-event holes, or not enough messages to fill the response. Otherwise, we return the messages directly to the client and backfill in the background for eventual consistency sake.
Fix https://github.com/matrix-org/synapse/issues/15696
* Check required power levels earlier in createRoom handler.
- If a server was configured to reject the creation of rooms with E2EE
enabled (by specifying an unattainably high power level for
"m.room.encryption" in default_power_level_content_override), the 403
error was not being triggered until after the room was created and
before the "m.room.power_levels" was sent. This allowed a user to
access the partially-configured room and complete the setup of E2EE
and power levels manually.
- This change causes the power level overrides to be checked earlier and
the request to be rejected before the user gains access to the room.
- A new `_validate_room_config` method is added to contain checks that
should be run before a room is created.
- The new test case confirms that a user request is rejected by the new
validation method.
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
* Add a changelog file.
* Formatting fix for black.
* Remove unneeded line from test.
---------
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
There appears to be a race where you can end up with entries in
`event_push_summary` with both a `NULL` and `main` thread ID.
Fixes#15736
Introduced in #15597
See https://github.com/matrix-org/synapse/pull/14095#discussion_r990335492
This is useful because when see that a relevant event is an `outlier` or `soft-failed`, then that's a good unexpected indicator explaining why it's not showing up. `filter_events_for_client` is used in `/sync`, `/messages`, `/context` which are all common end-to-end assertion touch points (also notifications, relations).
Implements stable support for MSC3882; this involves updating Synapse's support to
match the MSC / the spec says.
Continue to support the unstable version to allow clients to transition.
The stubs have some issues so this has some generous cast
and ignores in it, but it is better than not having stubs.
Note that confusing that Element is a function which creates
_Element instances (and similarly for Comment).
Will Hunt