Adding the Experiment Remake Pistol by RollaTroll.
This commit is contained in:
ma duce
parent
3a1a84e670
commit
057430875b
|
|
@ -0,0 +1,48 @@
|
|||
# The Experiment Remake
|
||||
|
||||
#### Author
|
||||
RollaTroll
|
||||
|
||||
#Description
|
||||
Uses .380 ACP and the filled down pin from a thumbtack as a firing pin.
|
||||
|
||||
#### Instructions
|
||||
You will need to have printed:
|
||||
|
||||
**Name Quantity**
|
||||
* Barrel 1
|
||||
* Body 1
|
||||
* Hammer_Body 1
|
||||
* Hammer_Slide 1
|
||||
* Handle 1
|
||||
* Long_Hammer_Slide_Pin 1
|
||||
* Short_Hammer_Slide_Pin 1
|
||||
* Trigger_Guard 1
|
||||
* Trigger_Guide 1
|
||||
* Trigger_Spring_Cap 1
|
||||
* Trigger_Spring 1
|
||||
* Trigger 1
|
||||
|
||||
You will need to have obtained:
|
||||
|
||||
**Name Quantity**
|
||||
* M2 Machine Nut 14
|
||||
* M2 Machine Screw 14
|
||||
* Filled Thumb Tack Pin 1
|
||||
|
||||
|
||||
It is best to file the point of the thumbtack down before you remove it, as the body gives a handle to hold on to or clamp. Make sure you round the tip down to about where it started sloping to a point. To remove the pin from the thumb tack, you could use a wire cutter to clip off unnecessary parts of the plastic casing, then squeeze it with a vice until it starts to crack, then twist with a pair of pliers. Make sure not to bend the pin, or you will have to straighten it later. The pin should have a rib that keeps it from coming out easily, but should also help hold it into the hammer slide.
|
||||
|
||||
Once all parts are printed and hardware gathered, you should start with the Trigger Guard and Body. Fit the guard onto the bottom of the body and screw it together, having the vertical side parallel to the front of the body. Before you put the grip on you will need to fit the trigger in and put the Trigger Spring and Trigger
|
||||
Spring Cap onto the trigger. You will want to glue the Trigger Spring Cap onto the trigger. You will now need to screw down the trigger guide, just make sure the side that has the overhand is holding in the Trigger Spring. If you do not do this now, you will have to remove the grip later. Once done, you may fit the grip onto the body and line up the 3 holes for the screws, it should sit flush to the trigger guard. The body will be extending forward of the grip. Insert the screws on each side and put the nuts on, tightening it up so it stays rigid.
|
||||
|
||||
You may now fit the Hammer Body in; just make sure the slot is open on the top. As you put it on, fit strong rubber bands on both sides in the set out slots. They should be trapped there and hang loose for now. Screw the Hammer Body in, it should be obvious.
|
||||
|
||||
Fit the Filled Thumb Tack Pin into the Hammer Slide, then fit that into the Body and put the Short Hammer Slide Pin in the front hole, and do the same with the Long Pin in the back hole. You may want to glue them in if they aren't tight on their own. Make sure the pins are close to even in their alignment. The first pin should sit flush to the sides and the long one should sit 10mm out from each side. Now put the rubber bands on their corresponding pins and make sure they'll stay, loop them around it once if necessary.
|
||||
|
||||
You may now fit the barrel into the front slot of the Hammer Body, but don't go shooting yet. If you used any glue in the assembly (which might be wise), then let it dry until it is supposed to be FULLY dry. Once done, you may try to shoot it from afar (e.g. clamp and string). To cock the weapon, pull the Hammer Slide back and down so it fits into the slot set out for it. The quicker you fire it, the better the rubber bands will perform, as they cool down and loose energy when left stretched.
|
||||
|
||||
#### DISCLAIMER
|
||||
I take no responsibility of any kind for any legal issues, damage, injury or death that may occur due to use of or production of this design. It is untested and is by NO means guaranteed to function. Use common sense and be careful.
|
||||
|
||||
NOTES: Looking back several months after designing it, I now realize that many major parts would be near impossible to print (Body, Hammer Slide, Hammer Body, Trigger, etc.). I may fix some of these problems at some point, but it may be awhile.
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 548 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 590 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 533 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 527 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 571 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 573 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
|
|
@ -0,0 +1,605 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP203' ),
|
||||
'1' );
|
||||
FILE_NAME ('Barrel.STEP',
|
||||
'2013-11-10T07:42:18',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#2 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#3 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #155, #534, ( #564 ) ) ;
|
||||
#4 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#5 = ORIENTED_EDGE ( 'NONE', *, *, #68, .T. ) ;
|
||||
#6 = AXIS2_PLACEMENT_3D ( 'NONE', #562, #559, #557 ) ;
|
||||
#7 = EDGE_CURVE ( 'NONE', #573, #529, #377, .T. ) ;
|
||||
#8 = ORIENTED_EDGE ( 'NONE', *, *, #42, .T. ) ;
|
||||
#9 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ;
|
||||
#10 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#11 = AXIS2_PLACEMENT_3D ( 'NONE', #136, #435, #568 ) ;
|
||||
#12 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 1.836970198721029600E-015, 4.898399999999999600 ) ) ;
|
||||
#13 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#14 = EDGE_LOOP ( 'NONE', ( #424, #504, #548, #471 ) ) ;
|
||||
#15 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#16 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#17 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ;
|
||||
#18 = CARTESIAN_POINT ( 'NONE', ( -4.799000000000000400, 0.0000000000000000000, 17.37200000000000000 ) ) ;
|
||||
#19 = AXIS2_PLACEMENT_3D ( 'NONE', #9, #311, #281 ) ;
|
||||
#20 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ;
|
||||
#21 = EDGE_CURVE ( 'NONE', #384, #558, #293, .T. ) ;
|
||||
#22 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#23 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#24 = PLANE ( 'NONE', #327 ) ;
|
||||
#25 = ORIENTED_EDGE ( 'NONE', *, *, #204, .T. ) ;
|
||||
#26 = ORIENTED_EDGE ( 'NONE', *, *, #532, .F. ) ;
|
||||
#27 = EDGE_CURVE ( 'NONE', #443, #461, #376, .T. ) ;
|
||||
#28 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, 1.206215864820185300E-015, 34.84949999999999900 ) ) ;
|
||||
#29 = AXIS2_PLACEMENT_3D ( 'NONE', #577, #574, #571 ) ;
|
||||
#30 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#31 = EDGE_CURVE ( 'NONE', #452, #573, #371, .T. ) ;
|
||||
#32 = ORIENTED_EDGE ( 'NONE', *, *, #21, .F. ) ;
|
||||
#33 = AXIS2_PLACEMENT_3D ( 'NONE', #498, #218, #503 ) ;
|
||||
#34 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#35 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#36 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#37 = VERTEX_POINT ( 'NONE', #181 ) ;
|
||||
#38 = ADVANCED_FACE ( 'NONE', ( #361 ), #355, .T. ) ;
|
||||
#39 = AXIS2_PLACEMENT_3D ( 'NONE', #316, #302, #321 ) ;
|
||||
#40 = EDGE_CURVE ( 'NONE', #443, #390, #378, .T. ) ;
|
||||
#41 = ADVANCED_FACE ( 'NONE', ( #360 ), #456, .T. ) ;
|
||||
#42 = EDGE_CURVE ( 'NONE', #511, #484, #353, .T. ) ;
|
||||
#43 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, 0.0000000000000000000, 17.27199999999999800 ) ) ;
|
||||
#44 = AXIS2_PLACEMENT_3D ( 'NONE', #394, #91, #307 ) ;
|
||||
#45 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#46 = EDGE_CURVE ( 'NONE', #390, #429, #354, .T. ) ;
|
||||
#47 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#48 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#49 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#50 = AXIS2_PLACEMENT_3D ( 'NONE', #411, #468, #475 ) ;
|
||||
#51 = ORIENTED_EDGE ( 'NONE', *, *, #431, .T. ) ;
|
||||
#52 = PLANE ( 'NONE', #272 ) ;
|
||||
#53 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, 5.754615309193413700E-016, 17.37200000000000000 ) ) ;
|
||||
#54 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, 4.898399999999999600 ) ) ;
|
||||
#55 = ORIENTED_EDGE ( 'NONE', *, *, #587, .F. ) ;
|
||||
#56 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -15.00000000000000200, 4.898399999999999600 ) ) ;
|
||||
#57 = AXIS2_PLACEMENT_3D ( 'NONE', #413, #409, #23 ) ;
|
||||
#58 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#59 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 15.00000000000000000, 4.898399999999999600 ) ) ;
|
||||
#60 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #88, #497, ( #375 ) ) ;
|
||||
#61 = EDGE_CURVE ( 'NONE', #229, #511, #347, .T. ) ;
|
||||
#62 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#63 = VERTEX_POINT ( 'NONE', #457 ) ;
|
||||
#64 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, 4.898399999999999600 ) ) ;
|
||||
#65 = AXIS2_PLACEMENT_3D ( 'NONE', #18, #4, #13 ) ;
|
||||
#66 = ADVANCED_FACE ( 'NONE', ( #357, #338 ), #408, .T. ) ;
|
||||
#67 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#68 = EDGE_CURVE ( 'NONE', #487, #443, #336, .T. ) ;
|
||||
#69 = ADVANCED_FACE ( 'NONE', ( #337 ), #153, .T. ) ;
|
||||
#70 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ;
|
||||
#71 = APPROVAL_DATE_TIME ( #73, #79 ) ;
|
||||
#72 = ORIENTED_EDGE ( 'NONE', *, *, #40, .F. ) ;
|
||||
#73 = DATE_AND_TIME ( #74, #75 ) ;
|
||||
#74 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#75 = LOCAL_TIME ( 17, 42, 18.00000000000000000, #80 ) ;
|
||||
#76 = AXIS2_PLACEMENT_3D ( 'NONE', #264, #393, #246 ) ;
|
||||
#77 = ORIENTED_EDGE ( 'NONE', *, *, #587, .T. ) ;
|
||||
#78 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#79 = APPROVAL ( #496, 'UNSPECIFIED' ) ;
|
||||
#80 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#81 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#82 = APPROVAL_PERSON_ORGANIZATION ( #83, #79, #495 ) ;
|
||||
#83 = PERSON_AND_ORGANIZATION ( #350, #156 ) ;
|
||||
#84 = EDGE_CURVE ( 'NONE', #420, #452, #344, .T. ) ;
|
||||
#85 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#86 = AXIS2_PLACEMENT_3D ( 'NONE', #291, #85, #110 ) ;
|
||||
#87 = EDGE_CURVE ( 'NONE', #199, #229, #332, .T. ) ;
|
||||
#88 = DATE_AND_TIME ( #89, #90 ) ;
|
||||
#89 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#90 = LOCAL_TIME ( 17, 42, 18.00000000000000000, #96 ) ;
|
||||
#91 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#92 = ORIENTED_EDGE ( 'NONE', *, *, #46, .T. ) ;
|
||||
#93 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#94 = AXIS2_PLACEMENT_3D ( 'NONE', #169, #231, #78 ) ;
|
||||
#95 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, 0.0000000000000000000, 17.27199999999999800 ) ) ;
|
||||
#96 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#97 = PERSON_AND_ORGANIZATION ( #350, #156 ) ;
|
||||
#98 = PERSON_AND_ORGANIZATION ( #350, #156 ) ;
|
||||
#99 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#100 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#101 = PERSON_AND_ORGANIZATION ( #350, #156 ) ;
|
||||
#102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#103 = APPROVAL_DATE_TIME ( #105, #159 ) ;
|
||||
#104 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 1.836970198721029600E-015, 34.84949999999999900 ) ) ;
|
||||
#105 = DATE_AND_TIME ( #106, #111 ) ;
|
||||
#106 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#107 = AXIS2_PLACEMENT_3D ( 'NONE', #401, #365, #356 ) ;
|
||||
#108 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Barrel', ( #173, #382 ), #482 ) ;
|
||||
#109 = CC_DESIGN_APPROVAL ( #79, ( #375 ) ) ;
|
||||
#110 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#111 = LOCAL_TIME ( 17, 42, 18.00000000000000000, #113 ) ;
|
||||
#112 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#113 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#114 = APPROVAL_PERSON_ORGANIZATION ( #120, #159, #515 ) ;
|
||||
#115 = ORIENTED_EDGE ( 'NONE', *, *, #339, .F. ) ;
|
||||
#116 = EDGE_CURVE ( 'NONE', #384, #474, #330, .T. ) ;
|
||||
#117 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#118 = EDGE_CURVE ( 'NONE', #436, #474, #325, .T. ) ;
|
||||
#119 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#120 = PERSON_AND_ORGANIZATION ( #350, #156 ) ;
|
||||
#121 = AXIS2_PLACEMENT_3D ( 'NONE', #10, #2, #1 ) ;
|
||||
#122 = DATE_AND_TIME ( #124, #132 ) ;
|
||||
#123 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#124 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#125 = EDGE_CURVE ( 'NONE', #523, #484, #334, .T. ) ;
|
||||
#126 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, 4.898399999999999600 ) ) ;
|
||||
#127 = ORIENTED_EDGE ( 'NONE', *, *, #217, .F. ) ;
|
||||
#128 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 0.0000000000000000000, 40.00000000000000000 ) ) ;
|
||||
#129 = CC_DESIGN_APPROVAL ( #159, ( #183 ) ) ;
|
||||
#130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#131 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#132 = LOCAL_TIME ( 17, 42, 18.00000000000000000, #133 ) ;
|
||||
#133 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#134 = AXIS2_PLACEMENT_3D ( 'NONE', #222, #447, #444 ) ;
|
||||
#135 = PERSON_AND_ORGANIZATION ( #350, #156 ) ;
|
||||
#136 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ;
|
||||
#137 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -2.449199999999998000, 4.898399999999999600 ) ) ;
|
||||
#138 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ;
|
||||
#139 = APPROVAL_DATE_TIME ( #140, #308 ) ;
|
||||
#140 = DATE_AND_TIME ( #141, #148 ) ;
|
||||
#141 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#142 = EDGE_LOOP ( 'NONE', ( #428, #51, #383, #469 ) ) ;
|
||||
#143 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#144 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #122, #522, ( #556 ) ) ;
|
||||
#145 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#146 = AXIS2_PLACEMENT_3D ( 'NONE', #367, #466, #366 ) ;
|
||||
#147 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#148 = LOCAL_TIME ( 17, 42, 18.00000000000000000, #150 ) ;
|
||||
#149 = CC_DESIGN_SECURITY_CLASSIFICATION ( #375, ( #183 ) ) ;
|
||||
#150 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#151 = APPROVAL_PERSON_ORGANIZATION ( #154, #308, #525 ) ;
|
||||
#152 = ORIENTED_EDGE ( 'NONE', *, *, #116, .T. ) ;
|
||||
#153 = PLANE ( 'NONE', #458 ) ;
|
||||
#154 = PERSON_AND_ORGANIZATION ( #350, #156 ) ;
|
||||
#155 = PERSON_AND_ORGANIZATION ( #350, #156 ) ;
|
||||
#156 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ;
|
||||
#157 = AXIS2_PLACEMENT_3D ( 'NONE', #213, #112, #100 ) ;
|
||||
#158 = ADVANCED_FACE ( 'NONE', ( #317 ), #24, .F. ) ;
|
||||
#159 = APPROVAL ( #518, 'UNSPECIFIED' ) ;
|
||||
#160 = ADVANCED_FACE ( 'NONE', ( #319 ), #52, .F. ) ;
|
||||
#161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#162 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ;
|
||||
#163 = PLANE ( 'NONE', #182 ) ;
|
||||
#164 = ORIENTED_EDGE ( 'NONE', *, *, #42, .F. ) ;
|
||||
#165 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 1.836970198721029600E-015, 40.00000000000000000 ) ) ;
|
||||
#166 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#167 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#168 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#169 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00000000000000000 ) ) ;
|
||||
#170 = SHAPE_DEFINITION_REPRESENTATION ( #228, #108 ) ;
|
||||
#171 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #564 ) ) ;
|
||||
#172 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ;
|
||||
#173 = MANIFOLD_SOLID_BREP ( 'Fillet3', #540 ) ;
|
||||
#174 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #135, #524, ( #556 ) ) ;
|
||||
#175 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -14.99999999999999800, 0.0000000000000000000 ) ) ;
|
||||
#176 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#177 = CIRCLE ( 'NONE', #65, 0.09999999999999939500 ) ;
|
||||
#178 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#179 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#180 = ORIENTED_EDGE ( 'NONE', *, *, #449, .T. ) ;
|
||||
#181 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -15.00000000000000200, 4.898399999999999600 ) ) ;
|
||||
#182 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #147, #145 ) ;
|
||||
#183 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #564, .NOT_KNOWN. ) ;
|
||||
#184 = VECTOR ( 'NONE', #34, 1000.000000000000000 ) ;
|
||||
#185 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.017969125134300100E-015, 4.898399999999999600 ) ) ;
|
||||
#186 = CIRCLE ( 'NONE', #6, 17.44919999999999800 ) ;
|
||||
#187 = CIRCLE ( 'NONE', #121, 4.953000000000000300 ) ;
|
||||
#188 = CYLINDRICAL_SURFACE ( 'NONE', #86, 4.953000000000000300 ) ;
|
||||
#189 = VERTEX_POINT ( 'NONE', #567 ) ;
|
||||
#190 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ;
|
||||
#191 = AXIS2_PLACEMENT_3D ( 'NONE', #467, #352, #450 ) ;
|
||||
#192 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -14.99999999999999800, 4.898399999999999600 ) ) ;
|
||||
#193 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#194 = CIRCLE ( 'NONE', #29, 15.00000000000000000 ) ;
|
||||
#195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#196 = FACE_OUTER_BOUND ( 'NONE', #14, .T. ) ;
|
||||
#197 = FACE_OUTER_BOUND ( 'NONE', #363, .T. ) ;
|
||||
#198 = EDGE_CURVE ( 'NONE', #558, #384, #312, .T. ) ;
|
||||
#199 = VERTEX_POINT ( 'NONE', #364 ) ;
|
||||
#200 = ADVANCED_FACE ( 'NONE', ( #310 ), #304, .F. ) ;
|
||||
#201 = CYLINDRICAL_SURFACE ( 'NONE', #44, 4.953000000000000300 ) ;
|
||||
#202 = TOROIDAL_SURFACE ( 'NONE', #279, 4.799000000000000400, 0.1000000000000000100 ) ;
|
||||
#203 = LINE ( 'NONE', #56, #212 ) ;
|
||||
#204 = EDGE_CURVE ( 'NONE', #420, #523, #305, .T. ) ;
|
||||
#205 = EDGE_LOOP ( 'NONE', ( #493, #460, #180, #478 ) ) ;
|
||||
#206 = AXIS2_PLACEMENT_3D ( 'NONE', #374, #388, #385 ) ;
|
||||
#207 = ADVANCED_FACE ( 'NONE', ( #313 ), #299, .T. ) ;
|
||||
#208 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ;
|
||||
#209 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#210 = LINE ( 'NONE', #54, #184 ) ;
|
||||
#211 = VECTOR ( 'NONE', #67, 1000.000000000000000 ) ;
|
||||
#212 = VECTOR ( 'NONE', #62, 1000.000000000000000 ) ;
|
||||
#213 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00000000000000000 ) ) ;
|
||||
#214 = ORIENTED_EDGE ( 'NONE', *, *, #7, .T. ) ;
|
||||
#215 = AXIS2_PLACEMENT_3D ( 'NONE', #138, #130, #179 ) ;
|
||||
#216 = VECTOR ( 'NONE', #93, 1000.000000000000000 ) ;
|
||||
#217 = EDGE_CURVE ( 'NONE', #420, #565, #301, .T. ) ;
|
||||
#218 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#219 = CYLINDRICAL_SURFACE ( 'NONE', #157, 15.00000000000000000 ) ;
|
||||
#220 = CIRCLE ( 'NONE', #255, 5.150500000000002700 ) ;
|
||||
#221 = ORIENTED_EDGE ( 'NONE', *, *, #21, .T. ) ;
|
||||
#222 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, 4.898399999999999600 ) ) ;
|
||||
#223 = AXIS2_PLACEMENT_3D ( 'NONE', #569, #16, #45 ) ;
|
||||
#224 = FACE_OUTER_BOUND ( 'NONE', #430, .T. ) ;
|
||||
#225 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, 6.065675596176840400E-016, 17.27199999999999800 ) ) ;
|
||||
#226 = LINE ( 'NONE', #95, #216 ) ;
|
||||
#227 = VECTOR ( 'NONE', #119, 1000.000000000000000 ) ;
|
||||
#228 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #556 ) ;
|
||||
#229 = VERTEX_POINT ( 'NONE', #333 ) ;
|
||||
#230 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#231 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#232 = LINE ( 'NONE', #126, #227 ) ;
|
||||
#233 = TOROIDAL_SURFACE ( 'NONE', #215, 9.849499999999999000, 5.150500000000001000 ) ;
|
||||
#234 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ;
|
||||
#235 = FACE_OUTER_BOUND ( 'NONE', #205, .T. ) ;
|
||||
#236 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#237 = ORIENTED_EDGE ( 'NONE', *, *, #483, .F. ) ;
|
||||
#238 = EDGE_CURVE ( 'NONE', #529, #565, #303, .T. ) ;
|
||||
#239 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.449199999999996700, 4.898399999999999600 ) ) ;
|
||||
#240 = AXIS2_PLACEMENT_3D ( 'NONE', #359, #553, #459 ) ;
|
||||
#241 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -2.449199999999998000, 0.0000000000000000000 ) ) ;
|
||||
#242 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, 0.0000000000000000000, 34.84949999999999900 ) ) ;
|
||||
#243 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#244 = FACE_OUTER_BOUND ( 'NONE', #453, .T. ) ;
|
||||
#245 = FACE_OUTER_BOUND ( 'NONE', #415, .T. ) ;
|
||||
#246 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#247 = LINE ( 'NONE', #117, #211 ) ;
|
||||
#248 = ORIENTED_EDGE ( 'NONE', *, *, #46, .F. ) ;
|
||||
#249 = ORIENTED_EDGE ( 'NONE', *, *, #84, .T. ) ;
|
||||
#250 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ;
|
||||
#251 = CIRCLE ( 'NONE', #433, 4.698999999999999800 ) ;
|
||||
#252 = VECTOR ( 'NONE', #195, 1000.000000000000000 ) ;
|
||||
#253 = CARTESIAN_POINT ( 'NONE', ( 9.849499999999999000, 0.0000000000000000000, 34.84949999999999900 ) ) ;
|
||||
#254 = CIRCLE ( 'NONE', #400, 15.00000000000000000 ) ;
|
||||
#255 = AXIS2_PLACEMENT_3D ( 'NONE', #253, #102, #99 ) ;
|
||||
#256 = ORIENTED_EDGE ( 'NONE', *, *, #238, .F. ) ;
|
||||
#257 = ADVANCED_FACE ( 'NONE', ( #296 ), #379, .F. ) ;
|
||||
#258 = EDGE_CURVE ( 'NONE', #63, #372, #290, .T. ) ;
|
||||
#259 = ADVANCED_FACE ( 'NONE', ( #314 ), #283, .F. ) ;
|
||||
#260 = VECTOR ( 'NONE', #178, 1000.000000000000000 ) ;
|
||||
#261 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#262 = LINE ( 'NONE', #192, #252 ) ;
|
||||
#263 = LINE ( 'NONE', #185, #260 ) ;
|
||||
#264 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ;
|
||||
#265 = EDGE_CURVE ( 'NONE', #427, #511, #289, .T. ) ;
|
||||
#266 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -14.99999999999999800, 4.898399999999999600 ) ) ;
|
||||
#267 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.449199999999998900, 4.898399999999999600 ) ) ;
|
||||
#268 = FACE_BOUND ( 'NONE', #560, .T. ) ;
|
||||
#269 = CIRCLE ( 'NONE', #373, 4.698999999999999800 ) ;
|
||||
#270 = CIRCLE ( 'NONE', #507, 17.44919999999999800 ) ;
|
||||
#271 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, -2.449199999999994500, 4.898399999999999600 ) ) ;
|
||||
#272 = AXIS2_PLACEMENT_3D ( 'NONE', #418, #579, #584 ) ;
|
||||
#273 = VECTOR ( 'NONE', #261, 1000.000000000000000 ) ;
|
||||
#274 = CIRCLE ( 'NONE', #473, 4.698999999999999800 ) ;
|
||||
#275 = FACE_OUTER_BOUND ( 'NONE', #421, .T. ) ;
|
||||
#276 = CIRCLE ( 'NONE', #76, 4.799000000000000400 ) ;
|
||||
#277 = LINE ( 'NONE', #287, #273 ) ;
|
||||
#278 = TOROIDAL_SURFACE ( 'NONE', #19, 9.849499999999999000, 5.150500000000001000 ) ;
|
||||
#279 = AXIS2_PLACEMENT_3D ( 'NONE', #70, #35, #58 ) ;
|
||||
#280 = EDGE_CURVE ( 'NONE', #565, #487, #284, .T. ) ;
|
||||
#281 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#282 = TOROIDAL_SURFACE ( 'NONE', #586, 4.799000000000000400, 0.1000000000000000100 ) ;
|
||||
#283 = CYLINDRICAL_SURFACE ( 'NONE', #544, 4.698999999999999800 ) ;
|
||||
#284 = CIRCLE ( 'NONE', #39, 15.00000000000000000 ) ;
|
||||
#285 = VECTOR ( 'NONE', #36, 1000.000000000000000 ) ;
|
||||
#286 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #555, 'distance_accuracy_value', 'NONE');
|
||||
#287 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.017969125134300100E-015, 0.0000000000000000000 ) ) ;
|
||||
#288 = AXIS2_PLACEMENT_3D ( 'NONE', #20, #22, #123 ) ;
|
||||
#289 = LINE ( 'NONE', #328, #285 ) ;
|
||||
#290 = LINE ( 'NONE', #341, #298 ) ;
|
||||
#291 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ;
|
||||
#292 = FACE_OUTER_BOUND ( 'NONE', #446, .T. ) ;
|
||||
#293 = CIRCLE ( 'NONE', #223, 4.953000000000000300 ) ;
|
||||
#294 = ADVANCED_FACE ( 'NONE', ( #292 ), #282, .T. ) ;
|
||||
#295 = CC_DESIGN_APPROVAL ( #308, ( #556 ) ) ;
|
||||
#296 = FACE_OUTER_BOUND ( 'NONE', #537, .T. ) ;
|
||||
#297 = ADVANCED_FACE ( 'NONE', ( #275 ), #278, .T. ) ;
|
||||
#298 = VECTOR ( 'NONE', #15, 1000.000000000000000 ) ;
|
||||
#299 = CYLINDRICAL_SURFACE ( 'NONE', #57, 17.44919999999999800 ) ;
|
||||
#300 = AXIS2_PLACEMENT_3D ( 'NONE', #17, #47, #510 ) ;
|
||||
#301 = LINE ( 'NONE', #128, #322 ) ;
|
||||
#302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#303 = CIRCLE ( 'NONE', #146, 15.00000000000000000 ) ;
|
||||
#304 = CYLINDRICAL_SURFACE ( 'NONE', #240, 4.698999999999999800 ) ;
|
||||
#305 = CIRCLE ( 'NONE', #206, 5.150500000000001000 ) ;
|
||||
#306 = ORIENTED_EDGE ( 'NONE', *, *, #545, .F. ) ;
|
||||
#307 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#308 = APPROVAL ( #528, 'UNSPECIFIED' ) ;
|
||||
#309 = EDGE_CURVE ( 'NONE', #63, #189, #277, .T. ) ;
|
||||
#310 = FACE_OUTER_BOUND ( 'NONE', #142, .T. ) ;
|
||||
#311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#312 = CIRCLE ( 'NONE', #300, 4.953000000000000300 ) ;
|
||||
#313 = FACE_OUTER_BOUND ( 'NONE', #445, .T. ) ;
|
||||
#314 = FACE_OUTER_BOUND ( 'NONE', #391, .T. ) ;
|
||||
#315 = EDGE_CURVE ( 'NONE', #229, #199, #276, .T. ) ;
|
||||
#316 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ;
|
||||
#317 = FACE_OUTER_BOUND ( 'NONE', #512, .T. ) ;
|
||||
#318 = VECTOR ( 'NONE', #343, 1000.000000000000000 ) ;
|
||||
#319 = FACE_OUTER_BOUND ( 'NONE', #439, .T. ) ;
|
||||
#320 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#321 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#322 = VECTOR ( 'NONE', #49, 1000.000000000000000 ) ;
|
||||
#323 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ;
|
||||
#324 = VECTOR ( 'NONE', #419, 1000.000000000000000 ) ;
|
||||
#325 = CIRCLE ( 'NONE', #389, 4.953000000000000300 ) ;
|
||||
#326 = EDGE_LOOP ( 'NONE', ( #249, #550, #472, #455, #127 ) ) ;
|
||||
#327 = AXIS2_PLACEMENT_3D ( 'NONE', #417, #588, #81 ) ;
|
||||
#328 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, 5.754615309193413700E-016, 40.00100000000000500 ) ) ;
|
||||
#329 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 34.84949999999999900 ) ) ;
|
||||
#330 = LINE ( 'NONE', #476, #324 ) ;
|
||||
#331 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, 0.0000000000000000000, 17.37200000000000000 ) ) ;
|
||||
#332 = CIRCLE ( 'NONE', #491, 4.799000000000000400 ) ;
|
||||
#333 = CARTESIAN_POINT ( 'NONE', ( 4.799000000000000400, 5.877079989108149200E-016, 17.27199999999999800 ) ) ;
|
||||
#334 = LINE ( 'NONE', #542, #318 ) ;
|
||||
#335 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, 6.065675596176840400E-016, 0.0000000000000000000 ) ) ;
|
||||
#336 = CIRCLE ( 'NONE', #33, 17.44919999999999800 ) ;
|
||||
#337 = FACE_OUTER_BOUND ( 'NONE', #414, .T. ) ;
|
||||
#338 = FACE_OUTER_BOUND ( 'NONE', #422, .T. ) ;
|
||||
#339 = EDGE_CURVE ( 'NONE', #372, #487, #270, .T. ) ;
|
||||
#340 = ORIENTED_EDGE ( 'NONE', *, *, #346, .F. ) ;
|
||||
#341 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.449199999999998900, 0.0000000000000000000 ) ) ;
|
||||
#342 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#343 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#344 = CIRCLE ( 'NONE', #578, 15.00000000000000000 ) ;
|
||||
#345 = VECTOR ( 'NONE', #402, 1000.000000000000000 ) ;
|
||||
#346 = EDGE_CURVE ( 'NONE', #484, #511, #274, .T. ) ;
|
||||
#347 = CIRCLE ( 'NONE', #50, 0.1000000000000002600 ) ;
|
||||
#348 = ORIENTED_EDGE ( 'NONE', *, *, #238, .T. ) ;
|
||||
#349 = DESIGN_CONTEXT ( 'detailed design', #533, 'design' ) ;
|
||||
#350 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;
|
||||
#351 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#352 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#353 = CIRCLE ( 'NONE', #191, 4.698999999999999800 ) ;
|
||||
#354 = LINE ( 'NONE', #470, #345 ) ;
|
||||
#355 = CYLINDRICAL_SURFACE ( 'NONE', #94, 15.00000000000000000 ) ;
|
||||
#356 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#357 = FACE_BOUND ( 'NONE', #488, .T. ) ;
|
||||
#358 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #101, #514, ( #183 ) ) ;
|
||||
#359 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00100000000000500 ) ) ;
|
||||
#360 = FACE_OUTER_BOUND ( 'NONE', #412, .T. ) ;
|
||||
#361 = FACE_OUTER_BOUND ( 'NONE', #326, .T. ) ;
|
||||
#362 = VECTOR ( 'NONE', #131, 1000.000000000000000 ) ;
|
||||
#363 = EDGE_LOOP ( 'NONE', ( #513, #585, #526, #164 ) ) ;
|
||||
#364 = CARTESIAN_POINT ( 'NONE', ( -4.799000000000000400, 0.0000000000000000000, 17.27199999999999800 ) ) ;
|
||||
#365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#366 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#367 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ;
|
||||
#368 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#369 = VECTOR ( 'NONE', #425, 1000.000000000000000 ) ;
|
||||
#370 = VECTOR ( 'NONE', #48, 1000.000000000000000 ) ;
|
||||
#371 = LINE ( 'NONE', #165, #362 ) ;
|
||||
#372 = VERTEX_POINT ( 'NONE', #267 ) ;
|
||||
#373 = AXIS2_PLACEMENT_3D ( 'NONE', #208, #193, #209 ) ;
|
||||
#374 = CARTESIAN_POINT ( 'NONE', ( -9.849499999999999000, 1.206215864820185300E-015, 34.84949999999999900 ) ) ;
|
||||
#375 = SECURITY_CLASSIFICATION ( '', '', #506 ) ;
|
||||
#376 = LINE ( 'NONE', #576, #370 ) ;
|
||||
#377 = CIRCLE ( 'NONE', #288, 15.00000000000000000 ) ;
|
||||
#378 = LINE ( 'NONE', #271, #369 ) ;
|
||||
#379 = PLANE ( 'NONE', #107 ) ;
|
||||
#380 = EDGE_CURVE ( 'NONE', #523, #427, #269, .T. ) ;
|
||||
#381 = ORIENTED_EDGE ( 'NONE', *, *, #40, .T. ) ;
|
||||
#382 = AXIS2_PLACEMENT_3D ( 'NONE', #583, #581, #538 ) ;
|
||||
#383 = ORIENTED_EDGE ( 'NONE', *, *, #125, .T. ) ;
|
||||
#384 = VERTEX_POINT ( 'NONE', #225 ) ;
|
||||
#385 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.224646799147352700E-016, 0.0000000000000000000 ) ) ;
|
||||
#386 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ;
|
||||
#387 = ORIENTED_EDGE ( 'NONE', *, *, #442, .F. ) ;
|
||||
#388 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#389 = AXIS2_PLACEMENT_3D ( 'NONE', #451, #500, #176 ) ;
|
||||
#390 = VERTEX_POINT ( 'NONE', #241 ) ;
|
||||
#391 = EDGE_LOOP ( 'NONE', ( #572, #464, #8, #563 ) ) ;
|
||||
#392 = ORIENTED_EDGE ( 'NONE', *, *, #339, .T. ) ;
|
||||
#393 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#394 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ;
|
||||
#395 = ORIENTED_EDGE ( 'NONE', *, *, #545, .T. ) ;
|
||||
#396 = ORIENTED_EDGE ( 'NONE', *, *, #516, .T. ) ;
|
||||
#397 = ORIENTED_EDGE ( 'NONE', *, *, #566, .T. ) ;
|
||||
#398 = ORIENTED_EDGE ( 'NONE', *, *, #442, .T. ) ;
|
||||
#399 = EDGE_CURVE ( 'NONE', #372, #37, #263, .T. ) ;
|
||||
#400 = AXIS2_PLACEMENT_3D ( 'NONE', #172, #167, #168 ) ;
|
||||
#401 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ;
|
||||
#402 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#403 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #97, #505, ( #375 ) ) ;
|
||||
#404 = ORIENTED_EDGE ( 'NONE', *, *, #217, .T. ) ;
|
||||
#405 = ORIENTED_EDGE ( 'NONE', *, *, #309, .F. ) ;
|
||||
#406 = ORIENTED_EDGE ( 'NONE', *, *, #87, .T. ) ;
|
||||
#407 = ORIENTED_EDGE ( 'NONE', *, *, #399, .T. ) ;
|
||||
#408 = PLANE ( 'NONE', #11 ) ;
|
||||
#409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#410 = EDGE_CURVE ( 'NONE', #461, #429, #262, .T. ) ;
|
||||
#411 = CARTESIAN_POINT ( 'NONE', ( 4.799000000000000400, 5.877079989108149200E-016, 17.37200000000000000 ) ) ;
|
||||
#412 = EDGE_LOOP ( 'NONE', ( #237, #501, #398, #396, #386 ) ) ;
|
||||
#413 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.449199999999996700, 0.0000000000000000000 ) ) ;
|
||||
#414 = EDGE_LOOP ( 'NONE', ( #405, #575, #407, #477 ) ) ;
|
||||
#415 = EDGE_LOOP ( 'NONE', ( #582, #547, #404, #256, #521 ) ) ;
|
||||
#416 = EDGE_CURVE ( 'NONE', #452, #420, #254, .T. ) ;
|
||||
#417 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ;
|
||||
#418 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, 2.017969125134300100E-015, 4.898399999999999600 ) ) ;
|
||||
#419 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#420 = VERTEX_POINT ( 'NONE', #190 ) ;
|
||||
#421 = EDGE_LOOP ( 'NONE', ( #539, #25, #535, #437 ) ) ;
|
||||
#422 = EDGE_LOOP ( 'NONE', ( #481, #221 ) ) ;
|
||||
#423 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#424 = ORIENTED_EDGE ( 'NONE', *, *, #116, .F. ) ;
|
||||
#425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#426 = ORIENTED_EDGE ( 'NONE', *, *, #280, .T. ) ;
|
||||
#427 = VERTEX_POINT ( 'NONE', #242 ) ;
|
||||
#428 = ORIENTED_EDGE ( 'NONE', *, *, #265, .F. ) ;
|
||||
#429 = VERTEX_POINT ( 'NONE', #175 ) ;
|
||||
#430 = EDGE_LOOP ( 'NONE', ( #32, #152, #395, #454 ) ) ;
|
||||
#431 = EDGE_CURVE ( 'NONE', #427, #523, #251, .T. ) ;
|
||||
#432 = ADVANCED_FACE ( 'NONE', ( #268, #244 ), #163, .F. ) ;
|
||||
#433 = AXIS2_PLACEMENT_3D ( 'NONE', #162, #161, #143 ) ;
|
||||
#434 = ORIENTED_EDGE ( 'NONE', *, *, #483, .T. ) ;
|
||||
#435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#436 = VERTEX_POINT ( 'NONE', #549 ) ;
|
||||
#437 = ORIENTED_EDGE ( 'NONE', *, *, #449, .F. ) ;
|
||||
#438 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #98, #509, ( #183 ) ) ;
|
||||
#439 = EDGE_LOOP ( 'NONE', ( #561, #381, #92, #494 ) ) ;
|
||||
#440 = ADVANCED_FACE ( 'NONE', ( #235 ), #233, .T. ) ;
|
||||
#441 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ;
|
||||
#442 = EDGE_CURVE ( 'NONE', #37, #529, #232, .T. ) ;
|
||||
#443 = VERTEX_POINT ( 'NONE', #137 ) ;
|
||||
#444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#445 = EDGE_LOOP ( 'NONE', ( #485, #55, #72, #499, #115 ) ) ;
|
||||
#446 = EDGE_LOOP ( 'NONE', ( #520, #527, #340, #26 ) ) ;
|
||||
#447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#448 = ADVANCED_FACE ( 'NONE', ( #245 ), #219, .T. ) ;
|
||||
#449 = EDGE_CURVE ( 'NONE', #452, #427, #220, .T. ) ;
|
||||
#450 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#451 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#452 = VERTEX_POINT ( 'NONE', #104 ) ;
|
||||
#453 = EDGE_LOOP ( 'NONE', ( #248, #77, #502, #434 ) ) ;
|
||||
#454 = ORIENTED_EDGE ( 'NONE', *, *, #480, .F. ) ;
|
||||
#455 = ORIENTED_EDGE ( 'NONE', *, *, #280, .F. ) ;
|
||||
#456 = PLANE ( 'NONE', #134 ) ;
|
||||
#457 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.449199999999998900, 0.0000000000000000000 ) ) ;
|
||||
#458 = AXIS2_PLACEMENT_3D ( 'NONE', #465, #517, #519 ) ;
|
||||
#459 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#460 = ORIENTED_EDGE ( 'NONE', *, *, #416, .F. ) ;
|
||||
#461 = VERTEX_POINT ( 'NONE', #266 ) ;
|
||||
#462 = ORIENTED_EDGE ( 'NONE', *, *, #27, .T. ) ;
|
||||
#463 = ORIENTED_EDGE ( 'NONE', *, *, #516, .F. ) ;
|
||||
#464 = ORIENTED_EDGE ( 'NONE', *, *, #265, .T. ) ;
|
||||
#465 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -2.017969125134300100E-015, 4.898399999999999600 ) ) ;
|
||||
#466 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#467 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ;
|
||||
#468 = DIRECTION ( 'NONE', ( -1.224646799147353200E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#469 = ORIENTED_EDGE ( 'NONE', *, *, #346, .T. ) ;
|
||||
#470 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, 2.017969125134300100E-015, -0.0000000000000000000 ) ) ;
|
||||
#471 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ;
|
||||
#472 = ORIENTED_EDGE ( 'NONE', *, *, #566, .F. ) ;
|
||||
#473 = AXIS2_PLACEMENT_3D ( 'NONE', #234, #30, #230 ) ;
|
||||
#474 = VERTEX_POINT ( 'NONE', #335 ) ;
|
||||
#475 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147353200E-016, 0.0000000000000000000 ) ) ;
|
||||
#476 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, 6.065675596176840400E-016, 17.27199999999999800 ) ) ;
|
||||
#477 = ORIENTED_EDGE ( 'NONE', *, *, #508, .T. ) ;
|
||||
#478 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ;
|
||||
#479 = ORIENTED_EDGE ( 'NONE', *, *, #315, .T. ) ;
|
||||
#480 = EDGE_CURVE ( 'NONE', #558, #436, #226, .T. ) ;
|
||||
#481 = ORIENTED_EDGE ( 'NONE', *, *, #198, .T. ) ;
|
||||
#482 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #286 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #555, #554, #546 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#483 = EDGE_CURVE ( 'NONE', #189, #429, #247, .T. ) ;
|
||||
#484 = VERTEX_POINT ( 'NONE', #331 ) ;
|
||||
#485 = ORIENTED_EDGE ( 'NONE', *, *, #258, .F. ) ;
|
||||
#486 = ADVANCED_FACE ( 'NONE', ( #224 ), #201, .F. ) ;
|
||||
#487 = VERTEX_POINT ( 'NONE', #59 ) ;
|
||||
#488 = EDGE_LOOP ( 'NONE', ( #406, #479 ) ) ;
|
||||
#489 = ADVANCED_FACE ( 'NONE', ( #197 ), #202, .T. ) ;
|
||||
#490 = ADVANCED_FACE ( 'NONE', ( #196 ), #188, .F. ) ;
|
||||
#491 = AXIS2_PLACEMENT_3D ( 'NONE', #441, #551, #552 ) ;
|
||||
#492 = ORIENTED_EDGE ( 'NONE', *, *, #399, .F. ) ;
|
||||
#493 = ORIENTED_EDGE ( 'NONE', *, *, #204, .F. ) ;
|
||||
#494 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ;
|
||||
#495 = APPROVAL_ROLE ( '' ) ;
|
||||
#496 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#497 = DATE_TIME_ROLE ( 'classification_date' ) ;
|
||||
#498 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.449199999999996700, 4.898399999999999600 ) ) ;
|
||||
#499 = ORIENTED_EDGE ( 'NONE', *, *, #68, .F. ) ;
|
||||
#500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#501 = ORIENTED_EDGE ( 'NONE', *, *, #508, .F. ) ;
|
||||
#502 = ORIENTED_EDGE ( 'NONE', *, *, #309, .T. ) ;
|
||||
#503 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#504 = ORIENTED_EDGE ( 'NONE', *, *, #198, .F. ) ;
|
||||
#505 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
|
||||
#506 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
|
||||
#507 = AXIS2_PLACEMENT_3D ( 'NONE', #239, #236, #243 ) ;
|
||||
#508 = EDGE_CURVE ( 'NONE', #37, #189, #203, .T. ) ;
|
||||
#509 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
|
||||
#510 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#511 = VERTEX_POINT ( 'NONE', #53 ) ;
|
||||
#512 = EDGE_LOOP ( 'NONE', ( #492, #392, #397, #214, #387 ) ) ;
|
||||
#513 = ORIENTED_EDGE ( 'NONE', *, *, #61, .F. ) ;
|
||||
#514 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#515 = APPROVAL_ROLE ( '' ) ;
|
||||
#516 = EDGE_CURVE ( 'NONE', #529, #461, #210, .T. ) ;
|
||||
#517 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.156482317317871500E-016, 0.0000000000000000000 ) ) ;
|
||||
#518 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#519 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#520 = ORIENTED_EDGE ( 'NONE', *, *, #315, .F. ) ;
|
||||
#521 = ORIENTED_EDGE ( 'NONE', *, *, #7, .F. ) ;
|
||||
#522 = DATE_TIME_ROLE ( 'creation_date' ) ;
|
||||
#523 = VERTEX_POINT ( 'NONE', #28 ) ;
|
||||
#524 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#525 = APPROVAL_ROLE ( '' ) ;
|
||||
#526 = ORIENTED_EDGE ( 'NONE', *, *, #532, .T. ) ;
|
||||
#527 = ORIENTED_EDGE ( 'NONE', *, *, #61, .T. ) ;
|
||||
#528 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#529 = VERTEX_POINT ( 'NONE', #64 ) ;
|
||||
#530 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#531 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #533 ) ;
|
||||
#532 = EDGE_CURVE ( 'NONE', #199, #484, #177, .T. ) ;
|
||||
#533 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#534 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
|
||||
#535 = ORIENTED_EDGE ( 'NONE', *, *, #431, .F. ) ;
|
||||
#536 = MECHANICAL_CONTEXT ( 'NONE', #541, 'mechanical' ) ;
|
||||
#537 = EDGE_LOOP ( 'NONE', ( #348, #426, #5, #462, #463 ) ) ;
|
||||
#538 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#539 = ORIENTED_EDGE ( 'NONE', *, *, #84, .F. ) ;
|
||||
#540 = CLOSED_SHELL ( 'NONE', ( #294, #259, #486, #297, #38, #207, #448, #440, #432, #490, #66, #200, #489, #41, #160, #257, #69, #158 ) ) ;
|
||||
#541 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#542 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, 0.0000000000000000000, 40.00100000000000500 ) ) ;
|
||||
#543 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #541 ) ;
|
||||
#544 = AXIS2_PLACEMENT_3D ( 'NONE', #580, #351, #368 ) ;
|
||||
#545 = EDGE_CURVE ( 'NONE', #474, #436, #187, .T. ) ;
|
||||
#546 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#547 = ORIENTED_EDGE ( 'NONE', *, *, #416, .T. ) ;
|
||||
#548 = ORIENTED_EDGE ( 'NONE', *, *, #480, .T. ) ;
|
||||
#549 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#550 = ORIENTED_EDGE ( 'NONE', *, *, #31, .T. ) ;
|
||||
#551 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#552 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#553 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#554 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#555 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#556 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #183, #349 ) ;
|
||||
#557 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#558 = VERTEX_POINT ( 'NONE', #43 ) ;
|
||||
#559 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#560 = EDGE_LOOP ( 'NONE', ( #570, #306 ) ) ;
|
||||
#561 = ORIENTED_EDGE ( 'NONE', *, *, #27, .F. ) ;
|
||||
#562 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.449199999999996700, 0.0000000000000000000 ) ) ;
|
||||
#563 = ORIENTED_EDGE ( 'NONE', *, *, #125, .F. ) ;
|
||||
#564 = PRODUCT ( 'Barrel', 'Barrel', '', ( #536 ) ) ;
|
||||
#565 = VERTEX_POINT ( 'NONE', #250 ) ;
|
||||
#566 = EDGE_CURVE ( 'NONE', #487, #573, #194, .T. ) ;
|
||||
#567 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -15.00000000000000200, 0.0000000000000000000 ) ) ;
|
||||
#568 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#569 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ;
|
||||
#570 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ;
|
||||
#571 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#572 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ;
|
||||
#573 = VERTEX_POINT ( 'NONE', #12 ) ;
|
||||
#574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#575 = ORIENTED_EDGE ( 'NONE', *, *, #258, .T. ) ;
|
||||
#576 = CARTESIAN_POINT ( 'NONE', ( -17.44919999999999800, 2.017969125134300100E-015, 4.898399999999999600 ) ) ;
|
||||
#577 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.898399999999999600 ) ) ;
|
||||
#578 = AXIS2_PLACEMENT_3D ( 'NONE', #329, #423, #530 ) ;
|
||||
#579 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.156482317317871500E-016, 0.0000000000000000000 ) ) ;
|
||||
#580 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00100000000000500 ) ) ;
|
||||
#581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#582 = ORIENTED_EDGE ( 'NONE', *, *, #31, .F. ) ;
|
||||
#583 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#584 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#585 = ORIENTED_EDGE ( 'NONE', *, *, #87, .F. ) ;
|
||||
#586 = AXIS2_PLACEMENT_3D ( 'NONE', #323, #342, #320 ) ;
|
||||
#587 = EDGE_CURVE ( 'NONE', #390, #63, #186, .T. ) ;
|
||||
#588 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,708 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP203' ),
|
||||
'1' );
|
||||
FILE_NAME ('Long_Hammer_Slide_Pin.STEP',
|
||||
'2013-11-10T07:46:30',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#2 = ORIENTED_EDGE ( 'NONE', *, *, #475, .F. ) ;
|
||||
#3 = ORIENTED_EDGE ( 'NONE', *, *, #579, .T. ) ;
|
||||
#4 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#5 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#6 = LOCAL_TIME ( 17, 46, 30.00000000000000000, #10 ) ;
|
||||
#7 = FACE_OUTER_BOUND ( 'NONE', #235, .T. ) ;
|
||||
#8 = VERTEX_POINT ( 'NONE', #387 ) ;
|
||||
#9 = ADVANCED_FACE ( 'NONE', ( #175 ), #78, .T. ) ;
|
||||
#10 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#11 = ORIENTED_EDGE ( 'NONE', *, *, #448, .T. ) ;
|
||||
#12 = ORIENTED_EDGE ( 'NONE', *, *, #462, .T. ) ;
|
||||
#13 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#14 = CARTESIAN_POINT ( 'NONE', ( -28.74999999999999600, 0.0000000000000000000, -3.750000000000000900 ) ) ;
|
||||
#15 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#16 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #309, 'distance_accuracy_value', 'NONE');
|
||||
#17 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#18 = PERSON_AND_ORGANIZATION ( #481, #69 ) ;
|
||||
#19 = ORIENTED_EDGE ( 'NONE', *, *, #451, .T. ) ;
|
||||
#20 = ORIENTED_EDGE ( 'NONE', *, *, #544, .F. ) ;
|
||||
#21 = ORIENTED_EDGE ( 'NONE', *, *, #399, .T. ) ;
|
||||
#22 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#23 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 5.357829746269669600E-016, 3.750000000000000000 ) ) ;
|
||||
#24 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#25 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#26 = APPROVAL_DATE_TIME ( #31, #162 ) ;
|
||||
#27 = VERTEX_POINT ( 'NONE', #447 ) ;
|
||||
#28 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#29 = ORIENTED_EDGE ( 'NONE', *, *, #198, .F. ) ;
|
||||
#30 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#31 = DATE_AND_TIME ( #36, #42 ) ;
|
||||
#32 = ORIENTED_EDGE ( 'NONE', *, *, #460, .T. ) ;
|
||||
#33 = ORIENTED_EDGE ( 'NONE', *, *, #500, .T. ) ;
|
||||
#34 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#35 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#36 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#37 = FACE_OUTER_BOUND ( 'NONE', #648, .T. ) ;
|
||||
#38 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#39 = VERTEX_POINT ( 'NONE', #319 ) ;
|
||||
#40 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#41 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#42 = LOCAL_TIME ( 17, 46, 30.00000000000000000, #51 ) ;
|
||||
#43 = ORIENTED_EDGE ( 'NONE', *, *, #603, .T. ) ;
|
||||
#44 = VERTEX_POINT ( 'NONE', #580 ) ;
|
||||
#45 = ORIENTED_EDGE ( 'NONE', *, *, #91, .T. ) ;
|
||||
#46 = ADVANCED_FACE ( 'NONE', ( #662 ), #519, .F. ) ;
|
||||
#47 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#48 = ADVANCED_FACE ( 'NONE', ( #71 ), #496, .F. ) ;
|
||||
#49 = ORIENTED_EDGE ( 'NONE', *, *, #74, .T. ) ;
|
||||
#50 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#51 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#52 = TOROIDAL_SURFACE ( 'NONE', #384, 3.750000000000000900, 1.250000000000000000 ) ;
|
||||
#53 = EDGE_LOOP ( 'NONE', ( #90, #378, #357, #461 ) ) ;
|
||||
#54 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#55 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#56 = APPROVAL_PERSON_ORGANIZATION ( #61, #162, #282 ) ;
|
||||
#57 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ;
|
||||
#58 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#59 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ;
|
||||
#60 = EDGE_LOOP ( 'NONE', ( #195, #214 ) ) ;
|
||||
#61 = PERSON_AND_ORGANIZATION ( #481, #69 ) ;
|
||||
#62 = TOROIDAL_SURFACE ( 'NONE', #386, 3.750000000000006700, 1.250000000000000000 ) ;
|
||||
#63 = CLOSED_SHELL ( 'NONE', ( #48, #572, #46, #622, #191, #299, #512, #104, #440, #184, #101, #364, #568, #237, #76, #79, #436, #629, #239, #372, #9, #520, #301, #143 ) ) ;
|
||||
#64 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#65 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#66 = PERSON_AND_ORGANIZATION ( #481, #69 ) ;
|
||||
#67 = ORIENTED_EDGE ( 'NONE', *, *, #443, .T. ) ;
|
||||
#68 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#69 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ;
|
||||
#70 = FACE_OUTER_BOUND ( 'NONE', #145, .T. ) ;
|
||||
#71 = FACE_OUTER_BOUND ( 'NONE', #484, .T. ) ;
|
||||
#72 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 4.592425496802574000E-016, 3.750000000000000000 ) ) ;
|
||||
#73 = VERTEX_POINT ( 'NONE', #419 ) ;
|
||||
#74 = EDGE_CURVE ( 'NONE', #391, #153, #633, .T. ) ;
|
||||
#75 = ORIENTED_EDGE ( 'NONE', *, *, #488, .T. ) ;
|
||||
#76 = ADVANCED_FACE ( 'NONE', ( #160 ), #269, .F. ) ;
|
||||
#77 = CIRCLE ( 'NONE', #345, 3.750000000000000000 ) ;
|
||||
#78 = TOROIDAL_SURFACE ( 'NONE', #432, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#79 = ADVANCED_FACE ( 'NONE', ( #472 ), #401, .T. ) ;
|
||||
#80 = ORIENTED_EDGE ( 'NONE', *, *, #670, .T. ) ;
|
||||
#81 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#82 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ;
|
||||
#83 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#84 = CARTESIAN_POINT ( 'NONE', ( -27.50000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#85 = VERTEX_POINT ( 'NONE', #400 ) ;
|
||||
#86 = ORIENTED_EDGE ( 'NONE', *, *, #691, .F. ) ;
|
||||
#87 = TOROIDAL_SURFACE ( 'NONE', #350, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#88 = ORIENTED_EDGE ( 'NONE', *, *, #475, .T. ) ;
|
||||
#89 = VERTEX_POINT ( 'NONE', #395 ) ;
|
||||
#90 = ORIENTED_EDGE ( 'NONE', *, *, #169, .F. ) ;
|
||||
#91 = EDGE_CURVE ( 'NONE', #73, #507, #281, .T. ) ;
|
||||
#92 = FACE_OUTER_BOUND ( 'NONE', #152, .T. ) ;
|
||||
#93 = ORIENTED_EDGE ( 'NONE', *, *, #488, .F. ) ;
|
||||
#94 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#95 = EDGE_LOOP ( 'NONE', ( #112, #415, #506, #106 ) ) ;
|
||||
#96 = VERTEX_POINT ( 'NONE', #435 ) ;
|
||||
#97 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 4.592425496802575000E-016, 3.750000000000000900 ) ) ;
|
||||
#98 = CARTESIAN_POINT ( 'NONE', ( -27.50000000000000400, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#99 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#100 = LOCAL_TIME ( 17, 46, 30.00000000000000000, #679 ) ;
|
||||
#101 = ADVANCED_FACE ( 'NONE', ( #147 ), #423, .T. ) ;
|
||||
#102 = ORIENTED_EDGE ( 'NONE', *, *, #362, .T. ) ;
|
||||
#103 = EDGE_LOOP ( 'NONE', ( #148, #3, #559, #348 ) ) ;
|
||||
#104 = ADVANCED_FACE ( 'NONE', ( #612 ), #305, .T. ) ;
|
||||
#105 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, -2.500000000000006700 ) ) ;
|
||||
#106 = ORIENTED_EDGE ( 'NONE', *, *, #508, .F. ) ;
|
||||
#107 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#108 = ORIENTED_EDGE ( 'NONE', *, *, #492, .F. ) ;
|
||||
#109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#110 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#111 = SHAPE_DEFINITION_REPRESENTATION ( #588, #258 ) ;
|
||||
#112 = ORIENTED_EDGE ( 'NONE', *, *, #500, .F. ) ;
|
||||
#113 = EDGE_LOOP ( 'NONE', ( #649, #555 ) ) ;
|
||||
#114 = CYLINDRICAL_SURFACE ( 'NONE', #375, 5.000000000000000000 ) ;
|
||||
#115 = ORIENTED_EDGE ( 'NONE', *, *, #687, .F. ) ;
|
||||
#116 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#117 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #263 ) ) ;
|
||||
#118 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#119 = CC_DESIGN_SECURITY_CLASSIFICATION ( #133, ( #149 ) ) ;
|
||||
#120 = CC_DESIGN_APPROVAL ( #124, ( #133 ) ) ;
|
||||
#121 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#122 = EDGE_LOOP ( 'NONE', ( #474, #368, #295, #93 ) ) ;
|
||||
#123 = ORIENTED_EDGE ( 'NONE', *, *, #443, .F. ) ;
|
||||
#124 = APPROVAL ( #260, 'UNSPECIFIED' ) ;
|
||||
#125 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#126 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #625, #262, ( #133 ) ) ;
|
||||
#127 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #676, #264, ( #133 ) ) ;
|
||||
#128 = ORIENTED_EDGE ( 'NONE', *, *, #448, .F. ) ;
|
||||
#129 = CIRCLE ( 'NONE', #182, 5.000000000000000000 ) ;
|
||||
#130 = CIRCLE ( 'NONE', #397, 3.750000000000000000 ) ;
|
||||
#131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ;
|
||||
#132 = ORIENTED_EDGE ( 'NONE', *, *, #515, .T. ) ;
|
||||
#133 = SECURITY_CLASSIFICATION ( '', '', #265 ) ;
|
||||
#134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#135 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #656, #271, ( #149 ) ) ;
|
||||
#136 = CIRCLE ( 'NONE', #183, 1.250000000000000200 ) ;
|
||||
#137 = EDGE_LOOP ( 'NONE', ( #234, #403, #279, #390 ) ) ;
|
||||
#138 = ORIENTED_EDGE ( 'NONE', *, *, #452, .T. ) ;
|
||||
#139 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ;
|
||||
#140 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #615, #272, ( #149 ) ) ;
|
||||
#141 = CC_DESIGN_APPROVAL ( #144, ( #149 ) ) ;
|
||||
#142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#143 = ADVANCED_FACE ( 'NONE', ( #595 ), #62, .F. ) ;
|
||||
#144 = APPROVAL ( #276, 'UNSPECIFIED' ) ;
|
||||
#145 = EDGE_LOOP ( 'NONE', ( #123, #166, #32, #424 ) ) ;
|
||||
#146 = CIRCLE ( 'NONE', #192, 5.000000000000000000 ) ;
|
||||
#147 = FACE_OUTER_BOUND ( 'NONE', #196, .T. ) ;
|
||||
#148 = ORIENTED_EDGE ( 'NONE', *, *, #582, .T. ) ;
|
||||
#149 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #263, .NOT_KNOWN. ) ;
|
||||
#150 = CIRCLE ( 'NONE', #190, 5.000000000000000000 ) ;
|
||||
#151 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #627, #277, ( #164 ) ) ;
|
||||
#152 = EDGE_LOOP ( 'NONE', ( #459, #446, #249, #178 ) ) ;
|
||||
#153 = VERTEX_POINT ( 'NONE', #110 ) ;
|
||||
#154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ;
|
||||
#155 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #18, #278, ( #164 ) ) ;
|
||||
#156 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#157 = ORIENTED_EDGE ( 'NONE', *, *, #504, .T. ) ;
|
||||
#158 = CC_DESIGN_APPROVAL ( #162, ( #164 ) ) ;
|
||||
#159 = LINE ( 'NONE', #525, #631 ) ;
|
||||
#160 = FACE_OUTER_BOUND ( 'NONE', #60, .T. ) ;
|
||||
#161 = VERTEX_POINT ( 'NONE', #23 ) ;
|
||||
#162 = APPROVAL ( #284, 'UNSPECIFIED' ) ;
|
||||
#163 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#164 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #149, #222 ) ;
|
||||
#165 = CIRCLE ( 'NONE', #197, 2.500000000000006700 ) ;
|
||||
#166 = ORIENTED_EDGE ( 'NONE', *, *, #582, .F. ) ;
|
||||
#167 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #66, #288, ( #263 ) ) ;
|
||||
#168 = ORIENTED_EDGE ( 'NONE', *, *, #466, .F. ) ;
|
||||
#169 = EDGE_CURVE ( 'NONE', #73, #243, #130, .T. ) ;
|
||||
#170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#171 = AXIS2_PLACEMENT_3D ( 'NONE', #333, #332, #290 ) ;
|
||||
#172 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, -3.750000000000006700 ) ) ;
|
||||
#173 = CIRCLE ( 'NONE', #193, 1.250000000000000200 ) ;
|
||||
#174 = FACE_OUTER_BOUND ( 'NONE', #369, .T. ) ;
|
||||
#175 = FACE_OUTER_BOUND ( 'NONE', #122, .T. ) ;
|
||||
#176 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#177 = CIRCLE ( 'NONE', #203, 1.250000000000000200 ) ;
|
||||
#178 = ORIENTED_EDGE ( 'NONE', *, *, #509, .F. ) ;
|
||||
#179 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#180 = ORIENTED_EDGE ( 'NONE', *, *, #691, .T. ) ;
|
||||
#181 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #16 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #309, #308, #307 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#182 = AXIS2_PLACEMENT_3D ( 'NONE', #313, #312, #310 ) ;
|
||||
#183 = AXIS2_PLACEMENT_3D ( 'NONE', #330, #329, #324 ) ;
|
||||
#184 = ADVANCED_FACE ( 'NONE', ( #256 ), #114, .T. ) ;
|
||||
#185 = TOROIDAL_SURFACE ( 'NONE', #201, 3.750000000000000900, 1.250000000000000000 ) ;
|
||||
#186 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#187 = ORIENTED_EDGE ( 'NONE', *, *, #614, .F. ) ;
|
||||
#188 = ORIENTED_EDGE ( 'NONE', *, *, #413, .F. ) ;
|
||||
#189 = VERTEX_POINT ( 'NONE', #438 ) ;
|
||||
#190 = AXIS2_PLACEMENT_3D ( 'NONE', #339, #336, #334 ) ;
|
||||
#191 = ADVANCED_FACE ( 'NONE', ( #37 ), #52, .F. ) ;
|
||||
#192 = AXIS2_PLACEMENT_3D ( 'NONE', #349, #344, #343 ) ;
|
||||
#193 = AXIS2_PLACEMENT_3D ( 'NONE', #363, #361, #359 ) ;
|
||||
#194 = CIRCLE ( 'NONE', #211, 5.000000000000000000 ) ;
|
||||
#195 = ORIENTED_EDGE ( 'NONE', *, *, #465, .T. ) ;
|
||||
#196 = EDGE_LOOP ( 'NONE', ( #686, #529, #228, #188 ) ) ;
|
||||
#197 = AXIS2_PLACEMENT_3D ( 'NONE', #376, #374, #373 ) ;
|
||||
#198 = EDGE_CURVE ( 'NONE', #434, #380, #575, .T. ) ;
|
||||
#199 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#200 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#201 = AXIS2_PLACEMENT_3D ( 'NONE', #689, #4, #487 ) ;
|
||||
#202 = FACE_OUTER_BOUND ( 'NONE', #323, .T. ) ;
|
||||
#203 = AXIS2_PLACEMENT_3D ( 'NONE', #383, #382, #381 ) ;
|
||||
#204 = TOROIDAL_SURFACE ( 'NONE', #356, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#205 = ORIENTED_EDGE ( 'NONE', *, *, #460, .F. ) ;
|
||||
#206 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#207 = ORIENTED_EDGE ( 'NONE', *, *, #668, .T. ) ;
|
||||
#208 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#209 = AXIS2_PLACEMENT_3D ( 'NONE', #15, #38, #5 ) ;
|
||||
#210 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#211 = AXIS2_PLACEMENT_3D ( 'NONE', #550, #490, #489 ) ;
|
||||
#212 = CIRCLE ( 'NONE', #216, 1.250000000000000200 ) ;
|
||||
#213 = ORIENTED_EDGE ( 'NONE', *, *, #508, .T. ) ;
|
||||
#214 = ORIENTED_EDGE ( 'NONE', *, *, #683, .T. ) ;
|
||||
#215 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#216 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #17, #13 ) ;
|
||||
#217 = AXIS2_PLACEMENT_3D ( 'NONE', #30, #28, #25 ) ;
|
||||
#218 = FACE_OUTER_BOUND ( 'NONE', #53, .T. ) ;
|
||||
#219 = ORIENTED_EDGE ( 'NONE', *, *, #683, .F. ) ;
|
||||
#220 = ORIENTED_EDGE ( 'NONE', *, *, #499, .T. ) ;
|
||||
#221 = AXIS2_PLACEMENT_3D ( 'NONE', #58, #55, #40 ) ;
|
||||
#222 = DESIGN_CONTEXT ( 'detailed design', #286, 'design' ) ;
|
||||
#223 = AXIS2_PLACEMENT_3D ( 'NONE', #72, #68, #59 ) ;
|
||||
#224 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#225 = AXIS2_PLACEMENT_3D ( 'NONE', #84, #83, #81 ) ;
|
||||
#226 = TOROIDAL_SURFACE ( 'NONE', #209, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#227 = ORIENTED_EDGE ( 'NONE', *, *, #499, .F. ) ;
|
||||
#228 = ORIENTED_EDGE ( 'NONE', *, *, #628, .T. ) ;
|
||||
#229 = AXIS2_PLACEMENT_3D ( 'NONE', #675, #590, #22 ) ;
|
||||
#230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#231 = AXIS2_PLACEMENT_3D ( 'NONE', #97, #99, #82 ) ;
|
||||
#232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#233 = CIRCLE ( 'NONE', #221, 5.000000000000000000 ) ;
|
||||
#234 = ORIENTED_EDGE ( 'NONE', *, *, #589, .F. ) ;
|
||||
#235 = EDGE_LOOP ( 'NONE', ( #115, #585, #315, #12 ) ) ;
|
||||
#236 = AXIS2_PLACEMENT_3D ( 'NONE', #660, #41, #644 ) ;
|
||||
#237 = ADVANCED_FACE ( 'NONE', ( #516 ), #684, .T. ) ;
|
||||
#238 = AXIS2_PLACEMENT_3D ( 'NONE', #671, #24, #34 ) ;
|
||||
#239 = ADVANCED_FACE ( 'NONE', ( #445 ), #325, .T. ) ;
|
||||
#240 = AXIS2_PLACEMENT_3D ( 'NONE', #626, #678, #680 ) ;
|
||||
#241 = CIRCLE ( 'NONE', #223, 1.250000000000000200 ) ;
|
||||
#242 = TOROIDAL_SURFACE ( 'NONE', #342, 3.750000000000000900, 1.250000000000000000 ) ;
|
||||
#243 = VERTEX_POINT ( 'NONE', #482 ) ;
|
||||
#244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#245 = AXIS2_PLACEMENT_3D ( 'NONE', #609, #593, #647 ) ;
|
||||
#246 = AXIS2_PLACEMENT_3D ( 'NONE', #667, #599, #650 ) ;
|
||||
#247 = AXIS2_PLACEMENT_3D ( 'NONE', #607, #606, #623 ) ;
|
||||
#248 = CIRCLE ( 'NONE', #217, 2.500000000000000400 ) ;
|
||||
#249 = ORIENTED_EDGE ( 'NONE', *, *, #462, .F. ) ;
|
||||
#250 = ORIENTED_EDGE ( 'NONE', *, *, #526, .T. ) ;
|
||||
#251 = AXIS2_PLACEMENT_3D ( 'NONE', #669, #688, #637 ) ;
|
||||
#252 = AXIS2_PLACEMENT_3D ( 'NONE', #658, #655, #608 ) ;
|
||||
#253 = EDGE_LOOP ( 'NONE', ( #317, #327, #11, #441 ) ) ;
|
||||
#254 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #581, #630 ) ;
|
||||
#255 = CYLINDRICAL_SURFACE ( 'NONE', #229, 5.000000000000000000 ) ;
|
||||
#256 = FACE_OUTER_BOUND ( 'NONE', #619, .T. ) ;
|
||||
#257 = EDGE_LOOP ( 'NONE', ( #102, #45, #270, #128 ) ) ;
|
||||
#258 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Long_Hammer_Slide_Pin', ( #421, #171 ), #181 ) ;
|
||||
#259 = APPROVAL_ROLE ( '' ) ;
|
||||
#260 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#261 = AXIS2_PLACEMENT_3D ( 'NONE', #47, #600, #64 ) ;
|
||||
#262 = DATE_TIME_ROLE ( 'classification_date' ) ;
|
||||
#263 = PRODUCT ( 'Long_Hammer_Slide_Pin', 'Long_Hammer_Slide_Pin', '', ( #289 ) ) ;
|
||||
#264 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
|
||||
#265 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
|
||||
#266 = AXIS2_PLACEMENT_3D ( 'NONE', #470, #134, #139 ) ;
|
||||
#267 = CIRCLE ( 'NONE', #231, 1.250000000000000200 ) ;
|
||||
#268 = ORIENTED_EDGE ( 'NONE', *, *, #504, .F. ) ;
|
||||
#269 = PLANE ( 'NONE', #417 ) ;
|
||||
#270 = ORIENTED_EDGE ( 'NONE', *, *, #399, .F. ) ;
|
||||
#271 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
|
||||
#272 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#273 = AXIS2_PLACEMENT_3D ( 'NONE', #473, #118, #54 ) ;
|
||||
#274 = APPROVAL_ROLE ( '' ) ;
|
||||
#275 = AXIS2_PLACEMENT_3D ( 'NONE', #657, #121, #645 ) ;
|
||||
#276 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#277 = DATE_TIME_ROLE ( 'creation_date' ) ;
|
||||
#278 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#279 = ORIENTED_EDGE ( 'NONE', *, *, #509, .T. ) ;
|
||||
#280 = TOROIDAL_SURFACE ( 'NONE', #236, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#281 = CIRCLE ( 'NONE', #411, 1.250000000000000200 ) ;
|
||||
#282 = APPROVAL_ROLE ( '' ) ;
|
||||
#283 = AXIS2_PLACEMENT_3D ( 'NONE', #643, #651, #620 ) ;
|
||||
#284 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#285 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #286 ) ;
|
||||
#286 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#287 = AXIS2_PLACEMENT_3D ( 'NONE', #598, #605, #154 ) ;
|
||||
#288 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
|
||||
#289 = MECHANICAL_CONTEXT ( 'NONE', #296, 'mechanical' ) ;
|
||||
#290 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#291 = FACE_OUTER_BOUND ( 'NONE', #326, .T. ) ;
|
||||
#292 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#293 = AXIS2_PLACEMENT_3D ( 'NONE', #586, #156, #591 ) ;
|
||||
#294 = ORIENTED_EDGE ( 'NONE', *, *, #413, .T. ) ;
|
||||
#295 = ORIENTED_EDGE ( 'NONE', *, *, #532, .T. ) ;
|
||||
#296 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#297 = AXIS2_PLACEMENT_3D ( 'NONE', #577, #578, #587 ) ;
|
||||
#298 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #296 ) ;
|
||||
#299 = ADVANCED_FACE ( 'NONE', ( #92 ), #204, .T. ) ;
|
||||
#300 = AXIS2_PLACEMENT_3D ( 'NONE', #570, #569, #565 ) ;
|
||||
#301 = ADVANCED_FACE ( 'NONE', ( #536 ), #87, .T. ) ;
|
||||
#302 = ORIENTED_EDGE ( 'NONE', *, *, #492, .T. ) ;
|
||||
#303 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#304 = CIRCLE ( 'NONE', #341, 2.500000000000006700 ) ;
|
||||
#305 = TOROIDAL_SURFACE ( 'NONE', #404, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#306 = AXIS2_PLACEMENT_3D ( 'NONE', #563, #561, #562 ) ;
|
||||
#307 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#308 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#309 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#310 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#311 = AXIS2_PLACEMENT_3D ( 'NONE', #551, #542, #109 ) ;
|
||||
#312 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#313 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#314 = VECTOR ( 'NONE', #601, 1000.000000000000000 ) ;
|
||||
#315 = ORIENTED_EDGE ( 'NONE', *, *, #616, .T. ) ;
|
||||
#316 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#317 = ORIENTED_EDGE ( 'NONE', *, *, #91, .F. ) ;
|
||||
#318 = AXIS2_PLACEMENT_3D ( 'NONE', #554, #556, #131 ) ;
|
||||
#319 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ;
|
||||
#321 = AXIS2_PLACEMENT_3D ( 'NONE', #546, #522, #543 ) ;
|
||||
#322 = AXIS2_PLACEMENT_3D ( 'NONE', #172, #170, #142 ) ;
|
||||
#323 = EDGE_LOOP ( 'NONE', ( #663, #302, #80, #187 ) ) ;
|
||||
#324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ;
|
||||
#325 = TOROIDAL_SURFACE ( 'NONE', #371, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#326 = EDGE_LOOP ( 'NONE', ( #86, #33, #57, #498 ) ) ;
|
||||
#327 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ;
|
||||
#328 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#330 = CARTESIAN_POINT ( 'NONE', ( -28.74999999999999600, 4.592425496802575000E-016, 3.750000000000000900 ) ) ;
|
||||
#331 = AXIS2_PLACEMENT_3D ( 'NONE', #540, #545, #541 ) ;
|
||||
#332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#333 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#335 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #215, #503 ) ;
|
||||
#336 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#337 = CIRCLE ( 'NONE', #225, 3.750000000000000000 ) ;
|
||||
#338 = ORIENTED_EDGE ( 'NONE', *, *, #479, .T. ) ;
|
||||
#339 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#340 = ORIENTED_EDGE ( 'NONE', *, *, #451, .F. ) ;
|
||||
#341 = AXIS2_PLACEMENT_3D ( 'NONE', #535, #107, #539 ) ;
|
||||
#342 = AXIS2_PLACEMENT_3D ( 'NONE', #524, #511, #521 ) ;
|
||||
#343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#344 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#345 = AXIS2_PLACEMENT_3D ( 'NONE', #518, #186, #510 ) ;
|
||||
#346 = FACE_OUTER_BOUND ( 'NONE', #528, .T. ) ;
|
||||
#347 = CIRCLE ( 'NONE', #367, 3.750000000000000000 ) ;
|
||||
#348 = ORIENTED_EDGE ( 'NONE', *, *, #670, .F. ) ;
|
||||
#349 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#350 = AXIS2_PLACEMENT_3D ( 'NONE', #493, #477, #501 ) ;
|
||||
#351 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#352 = EDGE_CURVE ( 'NONE', #380, #161, #347, .T. ) ;
|
||||
#353 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 4.592425496802582800E-016, 3.750000000000006700 ) ) ;
|
||||
#354 = LINE ( 'NONE', #681, #314 ) ;
|
||||
#355 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#356 = AXIS2_PLACEMENT_3D ( 'NONE', #497, #179, #502 ) ;
|
||||
#357 = ORIENTED_EDGE ( 'NONE', *, *, #628, .F. ) ;
|
||||
#358 = VERTEX_POINT ( 'NONE', #208 ) ;
|
||||
#359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#360 = AXIS2_PLACEMENT_3D ( 'NONE', #463, #468, #450 ) ;
|
||||
#361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#362 = EDGE_CURVE ( 'NONE', #243, #73, #77, .T. ) ;
|
||||
#363 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, -3.750000000000000900 ) ) ;
|
||||
#364 = ADVANCED_FACE ( 'NONE', ( #174 ), #495, .T. ) ;
|
||||
#365 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#366 = CIRCLE ( 'NONE', #238, 5.000000000000000000 ) ;
|
||||
#367 = AXIS2_PLACEMENT_3D ( 'NONE', #199, #513, #206 ) ;
|
||||
#368 = ORIENTED_EDGE ( 'NONE', *, *, #362, .F. ) ;
|
||||
#369 = EDGE_LOOP ( 'NONE', ( #20, #338, #294, #75 ) ) ;
|
||||
#370 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#371 = AXIS2_PLACEMENT_3D ( 'NONE', #485, #453, #491 ) ;
|
||||
#372 = ADVANCED_FACE ( 'NONE', ( #7 ), #242, .F. ) ;
|
||||
#373 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#374 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#375 = AXIS2_PLACEMENT_3D ( 'NONE', #370, #224, #230 ) ;
|
||||
#376 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#377 = CIRCLE ( 'NONE', #245, 5.000000000000000000 ) ;
|
||||
#378 = ORIENTED_EDGE ( 'NONE', *, *, #653, .T. ) ;
|
||||
#379 = AXIS2_PLACEMENT_3D ( 'NONE', #476, #478, #480 ) ;
|
||||
#380 = VERTEX_POINT ( 'NONE', #530 ) ;
|
||||
#381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ;
|
||||
#382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#383 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 4.592425496802574000E-016, 3.750000000000000000 ) ) ;
|
||||
#384 = AXIS2_PLACEMENT_3D ( 'NONE', #454, #458, #455 ) ;
|
||||
#385 = APPROVAL_DATE_TIME ( #428, #144 ) ;
|
||||
#386 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #303, #244 ) ;
|
||||
#387 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#388 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#389 = CIRCLE ( 'NONE', #247, 5.000000000000000000 ) ;
|
||||
#390 = ORIENTED_EDGE ( 'NONE', *, *, #74, .F. ) ;
|
||||
#391 = VERTEX_POINT ( 'NONE', #531 ) ;
|
||||
#392 = AXIS2_PLACEMENT_3D ( 'NONE', #388, #316, #355 ) ;
|
||||
#393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#394 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#395 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, -2.500000000000000400 ) ) ;
|
||||
#396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#397 = AXIS2_PLACEMENT_3D ( 'NONE', #442, #210, #449 ) ;
|
||||
#398 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#399 = EDGE_CURVE ( 'NONE', #434, #507, #304, .T. ) ;
|
||||
#400 = CARTESIAN_POINT ( 'NONE', ( -27.50000000000000400, 5.357829746269669600E-016, 3.750000000000000000 ) ) ;
|
||||
#401 = PLANE ( 'NONE', #406 ) ;
|
||||
#402 = CIRCLE ( 'NONE', #240, 1.250000000000000200 ) ;
|
||||
#403 = ORIENTED_EDGE ( 'NONE', *, *, #538, .F. ) ;
|
||||
#404 = AXIS2_PLACEMENT_3D ( 'NONE', #292, #394, #232 ) ;
|
||||
#405 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#406 = AXIS2_PLACEMENT_3D ( 'NONE', #571, #398, #396 ) ;
|
||||
#407 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#409 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#410 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#411 = AXIS2_PLACEMENT_3D ( 'NONE', #353, #328, #320 ) ;
|
||||
#412 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#413 = EDGE_CURVE ( 'NONE', #27, #584, #159, .T. ) ;
|
||||
#414 = TOROIDAL_SURFACE ( 'NONE', #246, 3.750000000000006700, 1.250000000000000000 ) ;
|
||||
#415 = ORIENTED_EDGE ( 'NONE', *, *, #526, .F. ) ;
|
||||
#416 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#417 = AXIS2_PLACEMENT_3D ( 'NONE', #412, #407, #405 ) ;
|
||||
#418 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 3.827021247335478800E-016, 2.500000000000000400 ) ) ;
|
||||
#419 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 5.357829746269669600E-016, 3.750000000000000000 ) ) ;
|
||||
#420 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#421 = MANIFOLD_SOLID_BREP ( 'Fillet1', #63 ) ;
|
||||
#422 = CIRCLE ( 'NONE', #252, 2.500000000000000400 ) ;
|
||||
#423 = CYLINDRICAL_SURFACE ( 'NONE', #392, 5.000000000000000000 ) ;
|
||||
#424 = ORIENTED_EDGE ( 'NONE', *, *, #603, .F. ) ;
|
||||
#425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#426 = AXIS2_PLACEMENT_3D ( 'NONE', #573, #456, #425 ) ;
|
||||
#427 = EDGE_CURVE ( 'NONE', #548, #380, #661, .T. ) ;
|
||||
#428 = DATE_AND_TIME ( #654, #642 ) ;
|
||||
#429 = AXIS2_PLACEMENT_3D ( 'NONE', #351, #420, #431 ) ;
|
||||
#430 = TOROIDAL_SURFACE ( 'NONE', #251, 3.750000000000000900, 1.250000000000000000 ) ;
|
||||
#431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#432 = AXIS2_PLACEMENT_3D ( 'NONE', #416, #439, #393 ) ;
|
||||
#433 = EDGE_LOOP ( 'NONE', ( #108, #67, #685, #205 ) ) ;
|
||||
#434 = VERTEX_POINT ( 'NONE', #105 ) ;
|
||||
#435 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#436 = ADVANCED_FACE ( 'NONE', ( #70 ), #672, .T. ) ;
|
||||
#437 = AXIS2_PLACEMENT_3D ( 'NONE', #410, #409, #408 ) ;
|
||||
#438 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#439 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#440 = ADVANCED_FACE ( 'NONE', ( #632 ), #611, .T. ) ;
|
||||
#441 = ORIENTED_EDGE ( 'NONE', *, *, #668, .F. ) ;
|
||||
#442 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#443 = EDGE_CURVE ( 'NONE', #85, #39, #618, .T. ) ;
|
||||
#444 = FACE_OUTER_BOUND ( 'NONE', #253, .T. ) ;
|
||||
#445 = FACE_OUTER_BOUND ( 'NONE', #137, .T. ) ;
|
||||
#446 = ORIENTED_EDGE ( 'NONE', *, *, #589, .T. ) ;
|
||||
#447 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#448 = EDGE_CURVE ( 'NONE', #243, #434, #682, .T. ) ;
|
||||
#449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#450 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#451 = EDGE_CURVE ( 'NONE', #96, #537, #659, .T. ) ;
|
||||
#452 = EDGE_CURVE ( 'NONE', #566, #39, #646, .T. ) ;
|
||||
#453 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#454 = CARTESIAN_POINT ( 'NONE', ( -28.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#456 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#457 = FACE_OUTER_BOUND ( 'NONE', #103, .T. ) ;
|
||||
#458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#459 = ORIENTED_EDGE ( 'NONE', *, *, #523, .F. ) ;
|
||||
#460 = EDGE_CURVE ( 'NONE', #604, #566, #602, .T. ) ;
|
||||
#461 = ORIENTED_EDGE ( 'NONE', *, *, #532, .F. ) ;
|
||||
#462 = EDGE_CURVE ( 'NONE', #153, #391, #574, .T. ) ;
|
||||
#463 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#464 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#465 = EDGE_CURVE ( 'NONE', #189, #537, #564, .T. ) ;
|
||||
#466 = EDGE_CURVE ( 'NONE', #507, #161, #583, .T. ) ;
|
||||
#467 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#468 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#469 = VECTOR ( 'NONE', #125, 1000.000000000000000 ) ;
|
||||
#470 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 4.592425496802574000E-016, 3.750000000000000000 ) ) ;
|
||||
#471 = CIRCLE ( 'NONE', #261, 3.750000000000000000 ) ;
|
||||
#472 = FACE_OUTER_BOUND ( 'NONE', #113, .T. ) ;
|
||||
#473 = CARTESIAN_POINT ( 'NONE', ( -27.50000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#474 = ORIENTED_EDGE ( 'NONE', *, *, #653, .F. ) ;
|
||||
#475 = EDGE_CURVE ( 'NONE', #44, #189, #558, .T. ) ;
|
||||
#476 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, -3.750000000000006700 ) ) ;
|
||||
#477 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#478 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#479 = EDGE_CURVE ( 'NONE', #610, #27, #553, .T. ) ;
|
||||
#480 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#481 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;
|
||||
#482 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#483 = CIRCLE ( 'NONE', #254, 1.250000000000000200 ) ;
|
||||
#484 = EDGE_LOOP ( 'NONE', ( #21, #560, #213, #29 ) ) ;
|
||||
#485 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#486 = ORIENTED_EDGE ( 'NONE', *, *, #465, .F. ) ;
|
||||
#487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#488 = EDGE_CURVE ( 'NONE', #584, #358, #552, .T. ) ;
|
||||
#489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#490 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#492 = EDGE_CURVE ( 'NONE', #85, #604, #527, .T. ) ;
|
||||
#493 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#494 = VECTOR ( 'NONE', #467, 1000.000000000000000 ) ;
|
||||
#495 = CYLINDRICAL_SURFACE ( 'NONE', #335, 5.000000000000000000 ) ;
|
||||
#496 = TOROIDAL_SURFACE ( 'NONE', #426, 3.750000000000006700, 1.250000000000000000 ) ;
|
||||
#497 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#498 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ;
|
||||
#499 = EDGE_CURVE ( 'NONE', #548, #566, #534, .T. ) ;
|
||||
#500 = EDGE_CURVE ( 'NONE', #8, #161, #514, .T. ) ;
|
||||
#501 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#502 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#504 = EDGE_CURVE ( 'NONE', #8, #39, #505, .T. ) ;
|
||||
#505 = LINE ( 'NONE', #116, #469 ) ;
|
||||
#506 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ;
|
||||
#507 = VERTEX_POINT ( 'NONE', #664 ) ;
|
||||
#508 = EDGE_CURVE ( 'NONE', #161, #380, #471, .T. ) ;
|
||||
#509 = EDGE_CURVE ( 'NONE', #96, #153, #483, .T. ) ;
|
||||
#510 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#511 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#512 = ADVANCED_FACE ( 'NONE', ( #457 ), #430, .F. ) ;
|
||||
#513 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#514 = CIRCLE ( 'NONE', #266, 1.250000000000000200 ) ;
|
||||
#515 = EDGE_CURVE ( 'NONE', #89, #673, #422, .T. ) ;
|
||||
#516 = FACE_OUTER_BOUND ( 'NONE', #596, .T. ) ;
|
||||
#517 = EDGE_LOOP ( 'NONE', ( #674, #19, #486, #2 ) ) ;
|
||||
#518 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#519 = TOROIDAL_SURFACE ( 'NONE', #429, 3.750000000000006700, 1.250000000000000000 ) ;
|
||||
#520 = ADVANCED_FACE ( 'NONE', ( #444 ), #414, .F. ) ;
|
||||
#521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#522 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#523 = EDGE_CURVE ( 'NONE', #44, #96, #389, .T. ) ;
|
||||
#524 = CARTESIAN_POINT ( 'NONE', ( -28.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#525 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#526 = EDGE_CURVE ( 'NONE', #548, #8, #377, .T. ) ;
|
||||
#527 = CIRCLE ( 'NONE', #273, 3.750000000000000000 ) ;
|
||||
#528 = EDGE_LOOP ( 'NONE', ( #227, #250, #157, #43 ) ) ;
|
||||
#529 = ORIENTED_EDGE ( 'NONE', *, *, #544, .T. ) ;
|
||||
#530 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#531 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000000, 5.357829746269669600E-016, 3.750000000000000000 ) ) ;
|
||||
#532 = EDGE_CURVE ( 'NONE', #243, #358, #402, .T. ) ;
|
||||
#533 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#534 = LINE ( 'NONE', #464, #494 ) ;
|
||||
#535 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#536 = FACE_OUTER_BOUND ( 'NONE', #95, .T. ) ;
|
||||
#537 = VERTEX_POINT ( 'NONE', #639 ) ;
|
||||
#538 = EDGE_CURVE ( 'NONE', #96, #44, #366, .T. ) ;
|
||||
#539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#540 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#542 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#544 = EDGE_CURVE ( 'NONE', #610, #358, #354, .T. ) ;
|
||||
#545 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#546 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#547 = VECTOR ( 'NONE', #557, 1000.000000000000000 ) ;
|
||||
#548 = VERTEX_POINT ( 'NONE', #35 ) ;
|
||||
#549 = ORIENTED_EDGE ( 'NONE', *, *, #198, .T. ) ;
|
||||
#550 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#551 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#552 = CIRCLE ( 'NONE', #275, 5.000000000000000000 ) ;
|
||||
#553 = CIRCLE ( 'NONE', #283, 5.000000000000000000 ) ;
|
||||
#554 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 4.592425496802574000E-016, 3.750000000000000000 ) ) ;
|
||||
#555 = ORIENTED_EDGE ( 'NONE', *, *, #479, .F. ) ;
|
||||
#556 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#557 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#558 = LINE ( 'NONE', #597, #547 ) ;
|
||||
#559 = ORIENTED_EDGE ( 'NONE', *, *, #515, .F. ) ;
|
||||
#560 = ORIENTED_EDGE ( 'NONE', *, *, #466, .T. ) ;
|
||||
#561 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#562 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#563 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#564 = CIRCLE ( 'NONE', #293, 5.000000000000000000 ) ;
|
||||
#565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#566 = VERTEX_POINT ( 'NONE', #365 ) ;
|
||||
#567 = ORIENTED_EDGE ( 'NONE', *, *, #616, .F. ) ;
|
||||
#568 = ADVANCED_FACE ( 'NONE', ( #346 ), #255, .T. ) ;
|
||||
#569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#570 = CARTESIAN_POINT ( 'NONE', ( -26.25000000000000400, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#571 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -1.561251128379126100E-014, 0.0000000000000000000 ) ) ;
|
||||
#572 = ADVANCED_FACE ( 'NONE', ( #291 ), #280, .T. ) ;
|
||||
#573 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#574 = CIRCLE ( 'NONE', #297, 3.750000000000000000 ) ;
|
||||
#575 = CIRCLE ( 'NONE', #379, 1.250000000000000200 ) ;
|
||||
#576 = ORIENTED_EDGE ( 'NONE', *, *, #687, .T. ) ;
|
||||
#577 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#578 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#579 = EDGE_CURVE ( 'NONE', #85, #673, #267, .T. ) ;
|
||||
#580 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#582 = EDGE_CURVE ( 'NONE', #604, #85, #337, .T. ) ;
|
||||
#583 = CIRCLE ( 'NONE', #287, 1.250000000000000200 ) ;
|
||||
#584 = VERTEX_POINT ( 'NONE', #617 ) ;
|
||||
#585 = ORIENTED_EDGE ( 'NONE', *, *, #614, .T. ) ;
|
||||
#586 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#588 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #164 ) ;
|
||||
#589 = EDGE_CURVE ( 'NONE', #44, #391, #241, .T. ) ;
|
||||
#590 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#592 = EDGE_LOOP ( 'NONE', ( #168, #207, #549, #613 ) ) ;
|
||||
#593 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#594 = VECTOR ( 'NONE', #50, 1000.000000000000000 ) ;
|
||||
#595 = FACE_OUTER_BOUND ( 'NONE', #592, .T. ) ;
|
||||
#596 = EDGE_LOOP ( 'NONE', ( #340, #634, #88, #219 ) ) ;
|
||||
#597 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#598 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 4.592425496802582800E-016, 3.750000000000006700 ) ) ;
|
||||
#599 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#600 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#601 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#602 = CIRCLE ( 'NONE', #300, 1.250000000000000200 ) ;
|
||||
#603 = EDGE_CURVE ( 'NONE', #39, #566, #233, .T. ) ;
|
||||
#604 = VERTEX_POINT ( 'NONE', #98 ) ;
|
||||
#605 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#606 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#607 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#608 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#609 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#610 = VERTEX_POINT ( 'NONE', #65 ) ;
|
||||
#611 = CYLINDRICAL_SURFACE ( 'NONE', #311, 5.000000000000000000 ) ;
|
||||
#612 = FACE_OUTER_BOUND ( 'NONE', #433, .T. ) ;
|
||||
#613 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ;
|
||||
#614 = EDGE_CURVE ( 'NONE', #673, #89, #248, .T. ) ;
|
||||
#615 = PERSON_AND_ORGANIZATION ( #481, #69 ) ;
|
||||
#616 = EDGE_CURVE ( 'NONE', #89, #153, #212, .T. ) ;
|
||||
#617 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#618 = CIRCLE ( 'NONE', #318, 1.250000000000000200 ) ;
|
||||
#619 = EDGE_LOOP ( 'NONE', ( #180, #220, #138, #268 ) ) ;
|
||||
#620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#621 = LOCAL_TIME ( 17, 46, 30.00000000000000000, #666 ) ;
|
||||
#622 = ADVANCED_FACE ( 'NONE', ( #218 ), #226, .T. ) ;
|
||||
#623 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#624 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#625 = DATE_AND_TIME ( #624, #100 ) ;
|
||||
#626 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#627 = DATE_AND_TIME ( #1, #6 ) ;
|
||||
#628 = EDGE_CURVE ( 'NONE', #358, #584, #194, .T. ) ;
|
||||
#629 = ADVANCED_FACE ( 'NONE', ( #202 ), #185, .F. ) ;
|
||||
#630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#631 = VECTOR ( 'NONE', #533, 1000.000000000000000 ) ;
|
||||
#632 = FACE_OUTER_BOUND ( 'NONE', #517, .T. ) ;
|
||||
#633 = CIRCLE ( 'NONE', #437, 3.750000000000000000 ) ;
|
||||
#634 = ORIENTED_EDGE ( 'NONE', *, *, #538, .T. ) ;
|
||||
#635 = PERSON_AND_ORGANIZATION ( #481, #69 ) ;
|
||||
#636 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#637 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#638 = PERSON_AND_ORGANIZATION ( #481, #69 ) ;
|
||||
#639 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#640 = APPROVAL_PERSON_ORGANIZATION ( #638, #144, #274 ) ;
|
||||
#641 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#642 = LOCAL_TIME ( 17, 46, 30.00000000000000000, #641 ) ;
|
||||
#643 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#646 = CIRCLE ( 'NONE', #306, 5.000000000000000000 ) ;
|
||||
#647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#648 = EDGE_LOOP ( 'NONE', ( #132, #576, #49, #567 ) ) ;
|
||||
#649 = ORIENTED_EDGE ( 'NONE', *, *, #677, .F. ) ;
|
||||
#650 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#651 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#652 = APPROVAL_PERSON_ORGANIZATION ( #635, #124, #259 ) ;
|
||||
#653 = EDGE_CURVE ( 'NONE', #73, #584, #177, .T. ) ;
|
||||
#654 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#655 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#656 = PERSON_AND_ORGANIZATION ( #481, #69 ) ;
|
||||
#657 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#658 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#659 = LINE ( 'NONE', #163, #594 ) ;
|
||||
#660 = CARTESIAN_POINT ( 'NONE', ( 16.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#661 = CIRCLE ( 'NONE', #331, 1.250000000000000200 ) ;
|
||||
#662 = FACE_OUTER_BOUND ( 'NONE', #257, .T. ) ;
|
||||
#663 = ORIENTED_EDGE ( 'NONE', *, *, #579, .F. ) ;
|
||||
#664 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 3.827021247335482700E-016, 2.500000000000006700 ) ) ;
|
||||
#665 = DATE_AND_TIME ( #636, #621 ) ;
|
||||
#666 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#667 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#668 = EDGE_CURVE ( 'NONE', #507, #434, #165, .T. ) ;
|
||||
#669 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#670 = EDGE_CURVE ( 'NONE', #604, #89, #173, .T. ) ;
|
||||
#671 = CARTESIAN_POINT ( 'NONE', ( -31.25000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#672 = TOROIDAL_SURFACE ( 'NONE', #321, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#673 = VERTEX_POINT ( 'NONE', #418 ) ;
|
||||
#674 = ORIENTED_EDGE ( 'NONE', *, *, #523, .T. ) ;
|
||||
#675 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#676 = PERSON_AND_ORGANIZATION ( #481, #69 ) ;
|
||||
#677 = EDGE_CURVE ( 'NONE', #27, #610, #146, .T. ) ;
|
||||
#678 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#679 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#680 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#681 = CARTESIAN_POINT ( 'NONE', ( -32.50000000000000000, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#682 = CIRCLE ( 'NONE', #322, 1.250000000000000200 ) ;
|
||||
#683 = EDGE_CURVE ( 'NONE', #537, #189, #150, .T. ) ;
|
||||
#684 = CYLINDRICAL_SURFACE ( 'NONE', #360, 5.000000000000000000 ) ;
|
||||
#685 = ORIENTED_EDGE ( 'NONE', *, *, #452, .F. ) ;
|
||||
#686 = ORIENTED_EDGE ( 'NONE', *, *, #677, .T. ) ;
|
||||
#687 = EDGE_CURVE ( 'NONE', #673, #391, #136, .T. ) ;
|
||||
#688 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#689 = CARTESIAN_POINT ( 'NONE', ( -28.75000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#690 = APPROVAL_DATE_TIME ( #665, #124 ) ;
|
||||
#691 = EDGE_CURVE ( 'NONE', #8, #548, #129, .T. ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
|
|
@ -0,0 +1,192 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP203' ),
|
||||
'1' );
|
||||
FILE_NAME ('Short_Hammer_Slide_Pin.STEP',
|
||||
'2013-11-10T07:46:07',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = APPROVAL ( #107, 'UNSPECIFIED' ) ;
|
||||
#2 = AXIS2_PLACEMENT_3D ( 'NONE', #44, #58, #47 ) ;
|
||||
#3 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ;
|
||||
#4 = AXIS2_PLACEMENT_3D ( 'NONE', #64, #60, #136 ) ;
|
||||
#5 = EDGE_CURVE ( 'NONE', #111, #12, #141, .T. ) ;
|
||||
#6 = ORIENTED_EDGE ( 'NONE', *, *, #17, .F. ) ;
|
||||
#7 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #33, .NOT_KNOWN. ) ;
|
||||
#8 = CC_DESIGN_APPROVAL ( #61, ( #113 ) ) ;
|
||||
#9 = EDGE_CURVE ( 'NONE', #12, #111, #159, .T. ) ;
|
||||
#10 = ADVANCED_FACE ( 'NONE', ( #162 ), #117, .T. ) ;
|
||||
#11 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #153, #83, ( #113 ) ) ;
|
||||
#12 = VERTEX_POINT ( 'NONE', #3 ) ;
|
||||
#13 = LOCAL_TIME ( 17, 46, 7.000000000000000000, #145 ) ;
|
||||
#14 = ADVANCED_FACE ( 'NONE', ( #116 ), #132, .T. ) ;
|
||||
#15 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #56, #34, ( #7 ) ) ;
|
||||
#16 = CC_DESIGN_APPROVAL ( #1, ( #21 ) ) ;
|
||||
#17 = EDGE_CURVE ( 'NONE', #89, #139, #125, .T. ) ;
|
||||
#18 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Short_Hammer_Slide_Pin', ( #103, #2 ), #101 ) ;
|
||||
#19 = EDGE_LOOP ( 'NONE', ( #163, #6 ) ) ;
|
||||
#20 = APPROVAL ( #79, 'UNSPECIFIED' ) ;
|
||||
#21 = SECURITY_CLASSIFICATION ( '', '', #45 ) ;
|
||||
#22 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #33 ) ) ;
|
||||
#23 = AXIS2_PLACEMENT_3D ( 'NONE', #82, #78, #77 ) ;
|
||||
#24 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #49 ) ;
|
||||
#25 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#26 = DESIGN_CONTEXT ( 'detailed design', #99, 'design' ) ;
|
||||
#27 = EDGE_LOOP ( 'NONE', ( #170, #166, #38, #164 ) ) ;
|
||||
#28 = AXIS2_PLACEMENT_3D ( 'NONE', #87, #94, #92 ) ;
|
||||
#29 = EDGE_CURVE ( 'NONE', #12, #139, #123, .T. ) ;
|
||||
#30 = PERSON_AND_ORGANIZATION ( #43, #127 ) ;
|
||||
#31 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #172, #104, ( #21 ) ) ;
|
||||
#32 = PERSON_AND_ORGANIZATION ( #43, #127 ) ;
|
||||
#33 = PRODUCT ( 'Short_Hammer_Slide_Pin', 'Short_Hammer_Slide_Pin', '', ( #129 ) ) ;
|
||||
#34 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#35 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #152, #84, ( #113 ) ) ;
|
||||
#36 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ;
|
||||
#37 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
|
||||
#38 = ORIENTED_EDGE ( 'NONE', *, *, #17, .T. ) ;
|
||||
#39 = ORIENTED_EDGE ( 'NONE', *, *, #9, .T. ) ;
|
||||
#40 = AXIS2_PLACEMENT_3D ( 'NONE', #71, #59, #52 ) ;
|
||||
#41 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #30, #109, ( #21 ) ) ;
|
||||
#42 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #74, 'distance_accuracy_value', 'NONE');
|
||||
#43 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;
|
||||
#44 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#45 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
|
||||
#46 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #32, #70, ( #7 ) ) ;
|
||||
#47 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#48 = EDGE_CURVE ( 'NONE', #139, #89, #124, .T. ) ;
|
||||
#49 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#50 = LOCAL_TIME ( 17, 46, 7.000000000000000000, #167 ) ;
|
||||
#51 = LOCAL_TIME ( 17, 46, 7.000000000000000000, #147 ) ;
|
||||
#52 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#53 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#54 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#55 = CC_DESIGN_APPROVAL ( #20, ( #7 ) ) ;
|
||||
#56 = PERSON_AND_ORGANIZATION ( #43, #127 ) ;
|
||||
#57 = EDGE_CURVE ( 'NONE', #111, #89, #173, .T. ) ;
|
||||
#58 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#59 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#60 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#61 = APPROVAL ( #91, 'UNSPECIFIED' ) ;
|
||||
#62 = EDGE_LOOP ( 'NONE', ( #144, #157, #143, #158 ) ) ;
|
||||
#63 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#64 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#65 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#66 = AXIS2_PLACEMENT_3D ( 'NONE', #65, #174, #140 ) ;
|
||||
#67 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #171, #25 ) ;
|
||||
#68 = DATE_AND_TIME ( #160, #51 ) ;
|
||||
#69 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ;
|
||||
#70 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
|
||||
#71 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#72 = PLANE ( 'NONE', #40 ) ;
|
||||
#73 = APPROVAL_ROLE ( '' ) ;
|
||||
#74 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#75 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#76 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#77 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#78 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#79 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#80 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#81 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#82 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#83 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#84 = DATE_TIME_ROLE ( 'creation_date' ) ;
|
||||
#85 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#86 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ;
|
||||
#87 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#88 = APPROVAL_ROLE ( '' ) ;
|
||||
#89 = VERTEX_POINT ( 'NONE', #86 ) ;
|
||||
#90 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ;
|
||||
#91 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#92 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#93 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#94 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#95 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ;
|
||||
#96 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #137, #37, ( #33 ) ) ;
|
||||
#97 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#98 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#99 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#100 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #99 ) ;
|
||||
#101 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #42 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #74, #54, #53 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#103 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #168 ) ;
|
||||
#104 = DATE_TIME_ROLE ( 'classification_date' ) ;
|
||||
#105 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #113 ) ;
|
||||
#106 = APPROVAL_ROLE ( '' ) ;
|
||||
#107 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#108 = ADVANCED_FACE ( 'NONE', ( #119 ), #122, .T. ) ;
|
||||
#109 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
|
||||
#110 = CC_DESIGN_SECURITY_CLASSIFICATION ( #21, ( #7 ) ) ;
|
||||
#111 = VERTEX_POINT ( 'NONE', #36 ) ;
|
||||
#112 = AXIS2_PLACEMENT_3D ( 'NONE', #81, #76, #80 ) ;
|
||||
#113 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #7, #26 ) ;
|
||||
#114 = FACE_OUTER_BOUND ( 'NONE', #19, .T. ) ;
|
||||
#115 = AXIS2_PLACEMENT_3D ( 'NONE', #97, #98, #102 ) ;
|
||||
#116 = FACE_OUTER_BOUND ( 'NONE', #118, .T. ) ;
|
||||
#117 = CYLINDRICAL_SURFACE ( 'NONE', #66, 4.999999999999999100 ) ;
|
||||
#118 = EDGE_LOOP ( 'NONE', ( #39, #161 ) ) ;
|
||||
#119 = FACE_OUTER_BOUND ( 'NONE', #62, .T. ) ;
|
||||
#120 = VECTOR ( 'NONE', #85, 1000.000000000000000 ) ;
|
||||
#121 = VECTOR ( 'NONE', #93, 1000.000000000000000 ) ;
|
||||
#122 = CYLINDRICAL_SURFACE ( 'NONE', #23, 4.999999999999999100 ) ;
|
||||
#123 = LINE ( 'NONE', #95, #121 ) ;
|
||||
#124 = CIRCLE ( 'NONE', #112, 4.999999999999999100 ) ;
|
||||
#125 = CIRCLE ( 'NONE', #28, 4.999999999999999100 ) ;
|
||||
#126 = DATE_AND_TIME ( #130, #131 ) ;
|
||||
#127 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ;
|
||||
#128 = SHAPE_DEFINITION_REPRESENTATION ( #105, #18 ) ;
|
||||
#129 = MECHANICAL_CONTEXT ( 'NONE', #49, 'mechanical' ) ;
|
||||
#130 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#131 = LOCAL_TIME ( 17, 46, 7.000000000000000000, #133 ) ;
|
||||
#132 = PLANE ( 'NONE', #115 ) ;
|
||||
#133 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#134 = APPROVAL_PERSON_ORGANIZATION ( #135, #61, #88 ) ;
|
||||
#135 = PERSON_AND_ORGANIZATION ( #43, #127 ) ;
|
||||
#136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#137 = PERSON_AND_ORGANIZATION ( #43, #127 ) ;
|
||||
#138 = PERSON_AND_ORGANIZATION ( #43, #127 ) ;
|
||||
#139 = VERTEX_POINT ( 'NONE', #69 ) ;
|
||||
#140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#141 = CIRCLE ( 'NONE', #4, 4.999999999999999100 ) ;
|
||||
#142 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#143 = ORIENTED_EDGE ( 'NONE', *, *, #29, .T. ) ;
|
||||
#144 = ORIENTED_EDGE ( 'NONE', *, *, #57, .F. ) ;
|
||||
#145 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#146 = APPROVAL_DATE_TIME ( #126, #61 ) ;
|
||||
#147 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#148 = PERSON_AND_ORGANIZATION ( #43, #127 ) ;
|
||||
#149 = APPROVAL_PERSON_ORGANIZATION ( #148, #1, #106 ) ;
|
||||
#150 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#151 = LOCAL_TIME ( 17, 46, 7.000000000000000000, #150 ) ;
|
||||
#152 = DATE_AND_TIME ( #63, #13 ) ;
|
||||
#153 = PERSON_AND_ORGANIZATION ( #43, #127 ) ;
|
||||
#154 = APPROVAL_DATE_TIME ( #156, #1 ) ;
|
||||
#155 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#156 = DATE_AND_TIME ( #155, #151 ) ;
|
||||
#157 = ORIENTED_EDGE ( 'NONE', *, *, #9, .F. ) ;
|
||||
#158 = ORIENTED_EDGE ( 'NONE', *, *, #48, .T. ) ;
|
||||
#159 = CIRCLE ( 'NONE', #67, 4.999999999999999100 ) ;
|
||||
#160 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#161 = ORIENTED_EDGE ( 'NONE', *, *, #5, .T. ) ;
|
||||
#162 = FACE_OUTER_BOUND ( 'NONE', #27, .T. ) ;
|
||||
#163 = ORIENTED_EDGE ( 'NONE', *, *, #48, .F. ) ;
|
||||
#164 = ORIENTED_EDGE ( 'NONE', *, *, #29, .F. ) ;
|
||||
#165 = ADVANCED_FACE ( 'NONE', ( #114 ), #72, .F. ) ;
|
||||
#166 = ORIENTED_EDGE ( 'NONE', *, *, #57, .T. ) ;
|
||||
#167 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#168 = CLOSED_SHELL ( 'NONE', ( #10, #108, #14, #165 ) ) ;
|
||||
#169 = APPROVAL_PERSON_ORGANIZATION ( #138, #20, #73 ) ;
|
||||
#170 = ORIENTED_EDGE ( 'NONE', *, *, #5, .F. ) ;
|
||||
#171 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#172 = DATE_AND_TIME ( #75, #50 ) ;
|
||||
#173 = LINE ( 'NONE', #90, #120 ) ;
|
||||
#174 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#175 = APPROVAL_DATE_TIME ( #68, #20 ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,468 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP203' ),
|
||||
'1' );
|
||||
FILE_NAME ('Trigger_Spring_Cap.STEP',
|
||||
'2013-11-10T07:43:05',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = CC_DESIGN_APPROVAL ( #423, ( #26 ) ) ;
|
||||
#2 = AXIS2_PLACEMENT_3D ( 'NONE', #435, #439, #429 ) ;
|
||||
#3 = VERTEX_POINT ( 'NONE', #375 ) ;
|
||||
#4 = AXIS2_PLACEMENT_3D ( 'NONE', #194, #383, #388 ) ;
|
||||
#5 = ORIENTED_EDGE ( 'NONE', *, *, #95, .T. ) ;
|
||||
#6 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #82, #44, ( #26 ) ) ;
|
||||
#7 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;
|
||||
#8 = AXIS2_PLACEMENT_3D ( 'NONE', #384, #392, #378 ) ;
|
||||
#9 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #450, #18 ) ;
|
||||
#10 = CC_DESIGN_APPROVAL ( #33, ( #15 ) ) ;
|
||||
#11 = CLOSED_SHELL ( 'NONE', ( #112, #85, #87, #91, #105, #103, #71, #118, #66, #77, #80, #115 ) ) ;
|
||||
#12 = AXIS2_PLACEMENT_3D ( 'NONE', #389, #386, #382 ) ;
|
||||
#13 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#14 = AXIS2_PLACEMENT_3D ( 'NONE', #416, #129, #385 ) ;
|
||||
#15 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #26, #310 ) ;
|
||||
#16 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #108, #64, ( #15 ) ) ;
|
||||
#17 = AXIS2_PLACEMENT_3D ( 'NONE', #427, #433, #428 ) ;
|
||||
#18 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#19 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #443, #445 ) ;
|
||||
#20 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #98, #50, ( #15 ) ) ;
|
||||
#21 = PRODUCT ( 'Trigger_Spring_Cap', 'Trigger_Spring_Cap', '', ( #58 ) ) ;
|
||||
#22 = ORIENTED_EDGE ( 'NONE', *, *, #176, .T. ) ;
|
||||
#23 = AXIS2_PLACEMENT_3D ( 'NONE', #377, #25, #437 ) ;
|
||||
#24 = VERTEX_POINT ( 'NONE', #417 ) ;
|
||||
#25 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#26 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #21, .NOT_KNOWN. ) ;
|
||||
#27 = AXIS2_PLACEMENT_3D ( 'NONE', #376, #350, #374 ) ;
|
||||
#28 = ORIENTED_EDGE ( 'NONE', *, *, #167, .F. ) ;
|
||||
#29 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #88, 'distance_accuracy_value', 'NONE');
|
||||
#30 = AXIS2_PLACEMENT_3D ( 'NONE', #441, #349, #340 ) ;
|
||||
#31 = DATE_TIME_ROLE ( 'classification_date' ) ;
|
||||
#32 = AXIS2_PLACEMENT_3D ( 'NONE', #321, #314, #318 ) ;
|
||||
#33 = APPROVAL ( #55, 'UNSPECIFIED' ) ;
|
||||
#34 = PLANE ( 'NONE', #14 ) ;
|
||||
#35 = APPROVAL_ROLE ( '' ) ;
|
||||
#36 = EDGE_CURVE ( 'NONE', #319, #415, #279, .T. ) ;
|
||||
#37 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#38 = APPROVAL_ROLE ( '' ) ;
|
||||
#39 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #61 ) ;
|
||||
#40 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
|
||||
#41 = AXIS2_PLACEMENT_3D ( 'NONE', #352, #348, #339 ) ;
|
||||
#42 = ORIENTED_EDGE ( 'NONE', *, *, #239, .T. ) ;
|
||||
#43 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
|
||||
#44 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#45 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
|
||||
#46 = AXIS2_PLACEMENT_3D ( 'NONE', #302, #295, #297 ) ;
|
||||
#47 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #75 ) ;
|
||||
#48 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#49 = APPROVAL_ROLE ( '' ) ;
|
||||
#50 = DATE_TIME_ROLE ( 'creation_date' ) ;
|
||||
#51 = APPROVAL_DATE_TIME ( #52, #259 ) ;
|
||||
#52 = DATE_AND_TIME ( #53, #56 ) ;
|
||||
#53 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#54 = EDGE_CURVE ( 'NONE', #448, #311, #285, .T. ) ;
|
||||
#55 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#56 = LOCAL_TIME ( 17, 43, 5.000000000000000000, #59 ) ;
|
||||
#57 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
|
||||
#58 = MECHANICAL_CONTEXT ( 'NONE', #75, 'mechanical' ) ;
|
||||
#59 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#60 = APPROVAL_PERSON_ORGANIZATION ( #62, #259, #38 ) ;
|
||||
#61 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#62 = PERSON_AND_ORGANIZATION ( #7, #125 ) ;
|
||||
#63 = DATE_AND_TIME ( #70, #72 ) ;
|
||||
#64 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#65 = AXIS2_PLACEMENT_3D ( 'NONE', #283, #288, #282 ) ;
|
||||
#66 = ADVANCED_FACE ( 'NONE', ( #276 ), #267, .F. ) ;
|
||||
#67 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#68 = EDGE_CURVE ( 'NONE', #309, #147, #275, .T. ) ;
|
||||
#69 = PLANE ( 'NONE', #9 ) ;
|
||||
#70 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#71 = ADVANCED_FACE ( 'NONE', ( #284 ), #261, .T. ) ;
|
||||
#72 = LOCAL_TIME ( 17, 43, 5.000000000000000000, #74 ) ;
|
||||
#73 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#74 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#75 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#76 = PERSON_AND_ORGANIZATION ( #7, #125 ) ;
|
||||
#77 = ADVANCED_FACE ( 'NONE', ( #268 ), #380, .T. ) ;
|
||||
#78 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#79 = AXIS2_PLACEMENT_3D ( 'NONE', #273, #270, #256 ) ;
|
||||
#80 = ADVANCED_FACE ( 'NONE', ( #264 ), #254, .F. ) ;
|
||||
#81 = PERSON_AND_ORGANIZATION ( #7, #125 ) ;
|
||||
#82 = PERSON_AND_ORGANIZATION ( #7, #125 ) ;
|
||||
#83 = APPROVAL_DATE_TIME ( #84, #423 ) ;
|
||||
#84 = DATE_AND_TIME ( #89, #90 ) ;
|
||||
#85 = ADVANCED_FACE ( 'NONE', ( #257 ), #248, .T. ) ;
|
||||
#86 = ORIENTED_EDGE ( 'NONE', *, *, #95, .F. ) ;
|
||||
#87 = ADVANCED_FACE ( 'NONE', ( #265, #255 ), #69, .T. ) ;
|
||||
#88 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#89 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#90 = LOCAL_TIME ( 17, 43, 5.000000000000000000, #92 ) ;
|
||||
#91 = ADVANCED_FACE ( 'NONE', ( #263, #245 ), #34, .F. ) ;
|
||||
#92 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#93 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#94 = APPROVAL_PERSON_ORGANIZATION ( #97, #423, #35 ) ;
|
||||
#95 = EDGE_CURVE ( 'NONE', #430, #345, #241, .T. ) ;
|
||||
#96 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#97 = PERSON_AND_ORGANIZATION ( #7, #125 ) ;
|
||||
#98 = DATE_AND_TIME ( #100, #101 ) ;
|
||||
#99 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#100 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#101 = LOCAL_TIME ( 17, 43, 5.000000000000000000, #106 ) ;
|
||||
#102 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#103 = ADVANCED_FACE ( 'NONE', ( #246 ), #434, .F. ) ;
|
||||
#104 = AXIS2_PLACEMENT_3D ( 'NONE', #252, #262, #250 ) ;
|
||||
#105 = ADVANCED_FACE ( 'NONE', ( #238 ), #231, .T. ) ;
|
||||
#106 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#107 = EDGE_CURVE ( 'NONE', #139, #411, #253, .T. ) ;
|
||||
#108 = PERSON_AND_ORGANIZATION ( #7, #125 ) ;
|
||||
#109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#110 = APPROVAL_DATE_TIME ( #113, #33 ) ;
|
||||
#111 = ORIENTED_EDGE ( 'NONE', *, *, #226, .T. ) ;
|
||||
#112 = ADVANCED_FACE ( 'NONE', ( #232 ), #220, .F. ) ;
|
||||
#113 = DATE_AND_TIME ( #114, #116 ) ;
|
||||
#114 = CALENDAR_DATE ( 2013, 10, 11 ) ;
|
||||
#115 = ADVANCED_FACE ( 'NONE', ( #235 ), #357, .T. ) ;
|
||||
#116 = LOCAL_TIME ( 17, 43, 5.000000000000000000, #117 ) ;
|
||||
#117 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#118 = ADVANCED_FACE ( 'NONE', ( #228 ), #344, .F. ) ;
|
||||
#119 = AXIS2_PLACEMENT_3D ( 'NONE', #266, #236, #240 ) ;
|
||||
#120 = APPROVAL_PERSON_ORGANIZATION ( #121, #33, #49 ) ;
|
||||
#121 = PERSON_AND_ORGANIZATION ( #7, #125 ) ;
|
||||
#122 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#124 = PERSON_AND_ORGANIZATION ( #7, #125 ) ;
|
||||
#125 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ;
|
||||
#126 = SHAPE_DEFINITION_REPRESENTATION ( #192, #298 ) ;
|
||||
#127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#128 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#130 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #21 ) ) ;
|
||||
#131 = EDGE_CURVE ( 'NONE', #333, #430, #217, .T. ) ;
|
||||
#132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#133 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#134 = AXIS2_PLACEMENT_3D ( 'NONE', #216, #243, #207 ) ;
|
||||
#135 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#136 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -7.500000000000001800 ) ) ;
|
||||
#137 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, 0.0000000000000000000, -5.000000000000000000 ) ) ;
|
||||
#138 = EDGE_CURVE ( 'NONE', #333, #3, #230, .T. ) ;
|
||||
#139 = VERTEX_POINT ( 'NONE', #335 ) ;
|
||||
#140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#141 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #11 ) ;
|
||||
#142 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ;
|
||||
#143 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#144 = EDGE_LOOP ( 'NONE', ( #446, #442, #5, #111 ) ) ;
|
||||
#145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#146 = EDGE_CURVE ( 'NONE', #415, #147, #211, .T. ) ;
|
||||
#147 = VERTEX_POINT ( 'NONE', #365 ) ;
|
||||
#148 = AXIS2_PLACEMENT_3D ( 'NONE', #193, #175, #185 ) ;
|
||||
#149 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#150 = VECTOR ( 'NONE', #99, 1000.000000000000000 ) ;
|
||||
#151 = LINE ( 'NONE', #136, #150 ) ;
|
||||
#152 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#153 = CIRCLE ( 'NONE', #210, 5.000000000000000900 ) ;
|
||||
#154 = VECTOR ( 'NONE', #393, 1000.000000000000000 ) ;
|
||||
#155 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#156 = EDGE_CURVE ( 'NONE', #292, #415, #212, .T. ) ;
|
||||
#157 = CIRCLE ( 'NONE', #202, 2.500000000000000900 ) ;
|
||||
#158 = VECTOR ( 'NONE', #160, 1000.000000000000000 ) ;
|
||||
#159 = LINE ( 'NONE', #183, #158 ) ;
|
||||
#160 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#161 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 0.0000000000000000000, -5.000000000000000000 ) ) ;
|
||||
#162 = VECTOR ( 'NONE', #169, 1000.000000000000000 ) ;
|
||||
#163 = CIRCLE ( 'NONE', #164, 5.000000000000000000 ) ;
|
||||
#164 = AXIS2_PLACEMENT_3D ( 'NONE', #149, #145, #143 ) ;
|
||||
#165 = VECTOR ( 'NONE', #196, 1000.000000000000000 ) ;
|
||||
#166 = CIRCLE ( 'NONE', #177, 2.500000000000000900 ) ;
|
||||
#167 = EDGE_CURVE ( 'NONE', #311, #402, #215, .T. ) ;
|
||||
#168 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#169 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#170 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#171 = VECTOR ( 'NONE', #199, 1000.000000000000000 ) ;
|
||||
#172 = LINE ( 'NONE', #184, #165 ) ;
|
||||
#173 = CIRCLE ( 'NONE', #148, 5.000000000000000000 ) ;
|
||||
#174 = VECTOR ( 'NONE', #227, 1000.000000000000000 ) ;
|
||||
#175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#176 = EDGE_CURVE ( 'NONE', #147, #311, #222, .T. ) ;
|
||||
#177 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #140, #135 ) ;
|
||||
#178 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ;
|
||||
#179 = LINE ( 'NONE', #251, #174 ) ;
|
||||
#180 = CIRCLE ( 'NONE', #134, 2.500000000000001300 ) ;
|
||||
#181 = LINE ( 'NONE', #170, #162 ) ;
|
||||
#182 = LINE ( 'NONE', #244, #171 ) ;
|
||||
#183 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -10.00000000000000000 ) ) ;
|
||||
#184 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#185 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#186 = CIRCLE ( 'NONE', #119, 5.000000000000000000 ) ;
|
||||
#187 = VECTOR ( 'NONE', #281, 1000.000000000000000 ) ;
|
||||
#188 = CIRCLE ( 'NONE', #104, 2.500000000000000900 ) ;
|
||||
#189 = CC_DESIGN_SECURITY_CLASSIFICATION ( #362, ( #26 ) ) ;
|
||||
#190 = EDGE_CURVE ( 'NONE', #3, #345, #204, .T. ) ;
|
||||
#191 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#192 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #15 ) ;
|
||||
#193 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#194 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#195 = CIRCLE ( 'NONE', #79, 5.000000000000000900 ) ;
|
||||
#196 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#197 = VECTOR ( 'NONE', #306, 1000.000000000000000 ) ;
|
||||
#198 = LINE ( 'NONE', #289, #187 ) ;
|
||||
#199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#200 = VECTOR ( 'NONE', #320, 1000.000000000000000 ) ;
|
||||
#201 = ORIENTED_EDGE ( 'NONE', *, *, #131, .F. ) ;
|
||||
#202 = AXIS2_PLACEMENT_3D ( 'NONE', #133, #127, #123 ) ;
|
||||
#203 = CIRCLE ( 'NONE', #65, 5.000000000000000000 ) ;
|
||||
#204 = LINE ( 'NONE', #323, #200 ) ;
|
||||
#205 = VECTOR ( 'NONE', #331, 1000.000000000000000 ) ;
|
||||
#206 = LINE ( 'NONE', #304, #197 ) ;
|
||||
#207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#208 = EDGE_CURVE ( 'NONE', #432, #391, #206, .T. ) ;
|
||||
#209 = VECTOR ( 'NONE', #328, 1000.000000000000000 ) ;
|
||||
#210 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #109, #96 ) ;
|
||||
#211 = LINE ( 'NONE', #337, #209 ) ;
|
||||
#212 = CIRCLE ( 'NONE', #32, 2.500000000000000900 ) ;
|
||||
#213 = VECTOR ( 'NONE', #356, 1000.000000000000000 ) ;
|
||||
#214 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -10.00000000000000000 ) ) ;
|
||||
#215 = LINE ( 'NONE', #326, #205 ) ;
|
||||
#216 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#217 = LINE ( 'NONE', #329, #218 ) ;
|
||||
#218 = VECTOR ( 'NONE', #338, 1000.000000000000000 ) ;
|
||||
#219 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ;
|
||||
#220 = CYLINDRICAL_SURFACE ( 'NONE', #27, 2.500000000000001300 ) ;
|
||||
#221 = ORIENTED_EDGE ( 'NONE', *, *, #449, .F. ) ;
|
||||
#222 = CIRCLE ( 'NONE', #46, 2.500000000000001300 ) ;
|
||||
#223 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#224 = CC_DESIGN_APPROVAL ( #259, ( #362 ) ) ;
|
||||
#225 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -7.500000000000001800 ) ) ;
|
||||
#226 = EDGE_CURVE ( 'NONE', #345, #24, #203, .T. ) ;
|
||||
#227 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#228 = FACE_OUTER_BOUND ( 'NONE', #301, .T. ) ;
|
||||
#229 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#230 = LINE ( 'NONE', #330, #213 ) ;
|
||||
#231 = CYLINDRICAL_SURFACE ( 'NONE', #23, 5.000000000000000900 ) ;
|
||||
#232 = FACE_OUTER_BOUND ( 'NONE', #291, .T. ) ;
|
||||
#233 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#234 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#235 = FACE_OUTER_BOUND ( 'NONE', #286, .T. ) ;
|
||||
#236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#237 = VECTOR ( 'NONE', #361, 1000.000000000000000 ) ;
|
||||
#238 = FACE_OUTER_BOUND ( 'NONE', #300, .T. ) ;
|
||||
#239 = EDGE_CURVE ( 'NONE', #391, #411, #198, .T. ) ;
|
||||
#240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#241 = LINE ( 'NONE', #444, #247 ) ;
|
||||
#242 = ORIENTED_EDGE ( 'NONE', *, *, #146, .T. ) ;
|
||||
#243 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#244 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#245 = FACE_BOUND ( 'NONE', #303, .T. ) ;
|
||||
#246 = FACE_OUTER_BOUND ( 'NONE', #294, .T. ) ;
|
||||
#247 = VECTOR ( 'NONE', #440, 1000.000000000000000 ) ;
|
||||
#248 = CYLINDRICAL_SURFACE ( 'NONE', #4, 5.000000000000000000 ) ;
|
||||
#249 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #29 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #88, #78, #73 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#251 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#252 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#253 = LINE ( 'NONE', #373, #237 ) ;
|
||||
#254 = CYLINDRICAL_SURFACE ( 'NONE', #12, 2.500000000000001300 ) ;
|
||||
#255 = FACE_BOUND ( 'NONE', #308, .T. ) ;
|
||||
#256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#257 = FACE_OUTER_BOUND ( 'NONE', #299, .T. ) ;
|
||||
#258 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#259 = APPROVAL ( #37, 'UNSPECIFIED' ) ;
|
||||
#260 = EDGE_CURVE ( 'NONE', #411, #3, #195, .T. ) ;
|
||||
#261 = CYLINDRICAL_SURFACE ( 'NONE', #2, 5.000000000000000000 ) ;
|
||||
#262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#263 = FACE_OUTER_BOUND ( 'NONE', #307, .T. ) ;
|
||||
#264 = FACE_OUTER_BOUND ( 'NONE', #290, .T. ) ;
|
||||
#265 = FACE_OUTER_BOUND ( 'NONE', #296, .T. ) ;
|
||||
#266 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ;
|
||||
#267 = CYLINDRICAL_SURFACE ( 'NONE', #17, 2.500000000000001300 ) ;
|
||||
#268 = FACE_OUTER_BOUND ( 'NONE', #287, .T. ) ;
|
||||
#269 = VECTOR ( 'NONE', #436, 1000.000000000000000 ) ;
|
||||
#270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#271 = ORIENTED_EDGE ( 'NONE', *, *, #54, .F. ) ;
|
||||
#272 = EDGE_CURVE ( 'NONE', #366, #319, #188, .T. ) ;
|
||||
#273 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#274 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -7.500000000000001800 ) ) ;
|
||||
#275 = LINE ( 'NONE', #191, #269 ) ;
|
||||
#276 = FACE_OUTER_BOUND ( 'NONE', #355, .T. ) ;
|
||||
#277 = VECTOR ( 'NONE', #421, 1000.000000000000000 ) ;
|
||||
#278 = ORIENTED_EDGE ( 'NONE', *, *, #167, .T. ) ;
|
||||
#279 = LINE ( 'NONE', #399, #277 ) ;
|
||||
#280 = EDGE_CURVE ( 'NONE', #24, #391, #186, .T. ) ;
|
||||
#281 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#283 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ;
|
||||
#284 = FACE_OUTER_BOUND ( 'NONE', #144, .T. ) ;
|
||||
#285 = LINE ( 'NONE', #426, #154 ) ;
|
||||
#286 = EDGE_LOOP ( 'NONE', ( #406, #367, #379, #371 ) ) ;
|
||||
#287 = EDGE_LOOP ( 'NONE', ( #28, #271, #419, #398 ) ) ;
|
||||
#288 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#289 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#290 = EDGE_LOOP ( 'NONE', ( #221, #405, #396, #368 ) ) ;
|
||||
#291 = EDGE_LOOP ( 'NONE', ( #312, #370, #315, #313 ) ) ;
|
||||
#292 = VERTEX_POINT ( 'NONE', #274 ) ;
|
||||
#293 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #63, #31, ( #362 ) ) ;
|
||||
#294 = EDGE_LOOP ( 'NONE', ( #431, #86, #201, #413 ) ) ;
|
||||
#295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#296 = EDGE_LOOP ( 'NONE', ( #332, #334, #336, #341, #343 ) ) ;
|
||||
#297 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#298 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Spring_Cap', ( #141, #409 ), #249 ) ;
|
||||
#299 = EDGE_LOOP ( 'NONE', ( #317, #316, #324, #325 ) ) ;
|
||||
#300 = EDGE_LOOP ( 'NONE', ( #451, #401, #400, #390 ) ) ;
|
||||
#301 = EDGE_LOOP ( 'NONE', ( #42, #414, #422, #381 ) ) ;
|
||||
#302 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#303 = EDGE_LOOP ( 'NONE', ( #22, #278, #407, #408, #242 ) ) ;
|
||||
#304 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#305 = EDGE_CURVE ( 'NONE', #319, #309, #179, .T. ) ;
|
||||
#306 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#307 = EDGE_LOOP ( 'NONE', ( #359, #360, #363, #364, #412 ) ) ;
|
||||
#308 = EDGE_LOOP ( 'NONE', ( #346, #347, #351, #353, #354 ) ) ;
|
||||
#309 = VERTEX_POINT ( 'NONE', #234 ) ;
|
||||
#310 = DESIGN_CONTEXT ( 'detailed design', #61, 'design' ) ;
|
||||
#311 = VERTEX_POINT ( 'NONE', #258 ) ;
|
||||
#312 = ORIENTED_EDGE ( 'NONE', *, *, #425, .T. ) ;
|
||||
#313 = ORIENTED_EDGE ( 'NONE', *, *, #397, .F. ) ;
|
||||
#314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#315 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ;
|
||||
#316 = ORIENTED_EDGE ( 'NONE', *, *, #403, .T. ) ;
|
||||
#317 = ORIENTED_EDGE ( 'NONE', *, *, #369, .F. ) ;
|
||||
#318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#319 = VERTEX_POINT ( 'NONE', #233 ) ;
|
||||
#320 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#321 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -5.000000000000000000 ) ) ;
|
||||
#322 = VERTEX_POINT ( 'NONE', #229 ) ;
|
||||
#323 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#324 = ORIENTED_EDGE ( 'NONE', *, *, #280, .T. ) ;
|
||||
#325 = ORIENTED_EDGE ( 'NONE', *, *, #208, .F. ) ;
|
||||
#326 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#327 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #76, #40, ( #362 ) ) ;
|
||||
#328 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#329 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#330 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#332 = ORIENTED_EDGE ( 'NONE', *, *, #438, .T. ) ;
|
||||
#333 = VERTEX_POINT ( 'NONE', #223 ) ;
|
||||
#334 = ORIENTED_EDGE ( 'NONE', *, *, #131, .T. ) ;
|
||||
#335 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#336 = ORIENTED_EDGE ( 'NONE', *, *, #404, .T. ) ;
|
||||
#337 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#338 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#340 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#341 = ORIENTED_EDGE ( 'NONE', *, *, #369, .T. ) ;
|
||||
#342 = EDGE_CURVE ( 'NONE', #309, #448, #180, .T. ) ;
|
||||
#343 = ORIENTED_EDGE ( 'NONE', *, *, #387, .T. ) ;
|
||||
#344 = PLANE ( 'NONE', #41 ) ;
|
||||
#345 = VERTEX_POINT ( 'NONE', #219 ) ;
|
||||
#346 = ORIENTED_EDGE ( 'NONE', *, *, #372, .F. ) ;
|
||||
#347 = ORIENTED_EDGE ( 'NONE', *, *, #342, .F. ) ;
|
||||
#348 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#349 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 1.734723475976807100E-016 ) ) ;
|
||||
#350 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#351 = ORIENTED_EDGE ( 'NONE', *, *, #305, .F. ) ;
|
||||
#352 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#353 = ORIENTED_EDGE ( 'NONE', *, *, #272, .F. ) ;
|
||||
#354 = ORIENTED_EDGE ( 'NONE', *, *, #425, .F. ) ;
|
||||
#355 = EDGE_LOOP ( 'NONE', ( #418, #420, #424, #394 ) ) ;
|
||||
#356 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#357 = PLANE ( 'NONE', #30 ) ;
|
||||
#358 = VERTEX_POINT ( 'NONE', #214 ) ;
|
||||
#359 = ORIENTED_EDGE ( 'NONE', *, *, #260, .F. ) ;
|
||||
#360 = ORIENTED_EDGE ( 'NONE', *, *, #239, .F. ) ;
|
||||
#361 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#362 = SECURITY_CLASSIFICATION ( '', '', #43 ) ;
|
||||
#363 = ORIENTED_EDGE ( 'NONE', *, *, #280, .F. ) ;
|
||||
#364 = ORIENTED_EDGE ( 'NONE', *, *, #226, .F. ) ;
|
||||
#365 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 0.0000000000000000000, -2.888894916580853800E-031 ) ) ;
|
||||
#366 = VERTEX_POINT ( 'NONE', #225 ) ;
|
||||
#367 = ORIENTED_EDGE ( 'NONE', *, *, #36, .F. ) ;
|
||||
#368 = ORIENTED_EDGE ( 'NONE', *, *, #156, .F. ) ;
|
||||
#369 = EDGE_CURVE ( 'NONE', #358, #432, #173, .T. ) ;
|
||||
#370 = ORIENTED_EDGE ( 'NONE', *, *, #449, .T. ) ;
|
||||
#371 = ORIENTED_EDGE ( 'NONE', *, *, #68, .T. ) ;
|
||||
#372 = EDGE_CURVE ( 'NONE', #448, #322, #182, .T. ) ;
|
||||
#373 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#375 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#376 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#377 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#379 = ORIENTED_EDGE ( 'NONE', *, *, #305, .T. ) ;
|
||||
#380 = PLANE ( 'NONE', #8 ) ;
|
||||
#381 = ORIENTED_EDGE ( 'NONE', *, *, #208, .T. ) ;
|
||||
#382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#383 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#384 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#385 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#386 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#387 = EDGE_CURVE ( 'NONE', #432, #139, #172, .T. ) ;
|
||||
#388 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#389 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#390 = ORIENTED_EDGE ( 'NONE', *, *, #107, .T. ) ;
|
||||
#391 = VERTEX_POINT ( 'NONE', #178 ) ;
|
||||
#392 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#393 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#394 = ORIENTED_EDGE ( 'NONE', *, *, #54, .T. ) ;
|
||||
#395 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #81, #45, ( #26 ) ) ;
|
||||
#396 = ORIENTED_EDGE ( 'NONE', *, *, #36, .T. ) ;
|
||||
#397 = EDGE_CURVE ( 'NONE', #322, #402, #181, .T. ) ;
|
||||
#398 = ORIENTED_EDGE ( 'NONE', *, *, #397, .T. ) ;
|
||||
#399 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000900, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#400 = ORIENTED_EDGE ( 'NONE', *, *, #438, .F. ) ;
|
||||
#401 = ORIENTED_EDGE ( 'NONE', *, *, #138, .F. ) ;
|
||||
#402 = VERTEX_POINT ( 'NONE', #161 ) ;
|
||||
#403 = EDGE_CURVE ( 'NONE', #358, #24, #159, .T. ) ;
|
||||
#404 = EDGE_CURVE ( 'NONE', #430, #358, #163, .T. ) ;
|
||||
#405 = ORIENTED_EDGE ( 'NONE', *, *, #272, .T. ) ;
|
||||
#406 = ORIENTED_EDGE ( 'NONE', *, *, #146, .F. ) ;
|
||||
#407 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ;
|
||||
#408 = ORIENTED_EDGE ( 'NONE', *, *, #156, .T. ) ;
|
||||
#409 = AXIS2_PLACEMENT_3D ( 'NONE', #93, #132, #67 ) ;
|
||||
#410 = EDGE_CURVE ( 'NONE', #402, #292, #166, .T. ) ;
|
||||
#411 = VERTEX_POINT ( 'NONE', #155 ) ;
|
||||
#412 = ORIENTED_EDGE ( 'NONE', *, *, #190, .F. ) ;
|
||||
#413 = ORIENTED_EDGE ( 'NONE', *, *, #138, .T. ) ;
|
||||
#414 = ORIENTED_EDGE ( 'NONE', *, *, #107, .F. ) ;
|
||||
#415 = VERTEX_POINT ( 'NONE', #137 ) ;
|
||||
#416 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#417 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -10.00000000000000000 ) ) ;
|
||||
#418 = ORIENTED_EDGE ( 'NONE', *, *, #176, .F. ) ;
|
||||
#419 = ORIENTED_EDGE ( 'NONE', *, *, #372, .T. ) ;
|
||||
#420 = ORIENTED_EDGE ( 'NONE', *, *, #68, .F. ) ;
|
||||
#421 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#422 = ORIENTED_EDGE ( 'NONE', *, *, #387, .F. ) ;
|
||||
#423 = APPROVAL ( #48, 'UNSPECIFIED' ) ;
|
||||
#424 = ORIENTED_EDGE ( 'NONE', *, *, #342, .T. ) ;
|
||||
#425 = EDGE_CURVE ( 'NONE', #322, #366, #157, .T. ) ;
|
||||
#426 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#427 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#429 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#430 = VERTEX_POINT ( 'NONE', #128 ) ;
|
||||
#431 = ORIENTED_EDGE ( 'NONE', *, *, #190, .T. ) ;
|
||||
#432 = VERTEX_POINT ( 'NONE', #152 ) ;
|
||||
#433 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#434 = PLANE ( 'NONE', #19 ) ;
|
||||
#435 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#436 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#438 = EDGE_CURVE ( 'NONE', #139, #333, #153, .T. ) ;
|
||||
#439 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#440 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#441 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#442 = ORIENTED_EDGE ( 'NONE', *, *, #404, .F. ) ;
|
||||
#443 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.734723475976807100E-016 ) ) ;
|
||||
#444 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.500000000000000000, -5.000000000000000000 ) ) ;
|
||||
#445 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#446 = ORIENTED_EDGE ( 'NONE', *, *, #403, .F. ) ;
|
||||
#447 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #124, #57, ( #21 ) ) ;
|
||||
#448 = VERTEX_POINT ( 'NONE', #122 ) ;
|
||||
#449 = EDGE_CURVE ( 'NONE', #366, #292, #151, .T. ) ;
|
||||
#450 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#451 = ORIENTED_EDGE ( 'NONE', *, *, #260, .T. ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Loading…
Reference in New Issue