Adding The Experiment Remake Pepperbox by Rollatroll.
This commit is contained in:
ma duce
parent
057430875b
commit
6cfe2ea9bf
|
|
@ -0,0 +1,24 @@
|
|||
# The Experiment Remake Pepperbox
|
||||
|
||||
#### Author
|
||||
RollaTroll
|
||||
|
||||
#### Description
|
||||
This a Pepperbox version of the Experiment Remake.
|
||||
|
||||
#### Instructions
|
||||
It's assembled in much the same way. However, you WILL have to print the parts for the Pepperbox. The only differences between the Assembly methods are on the Barrels part.
|
||||
|
||||
Do not put the Barrel and Barrel Shaft on until you have both the Front Block and Trigger Guard on. Once ready, you should put glue in the appropriate hole in the Front Block, then drop the Barrel into place and fit the Barrel Shaft in through the front hole of the Trigger Guard and fit it into the glued hole of the Front Block. Make sure the end with a hole is not the end that goes into the Front Block!
|
||||
|
||||
You may then put glue in the hole for the nut, this should be in the end of the Barrel Shaft. Make sure it is FULLY dry before you put the Barrel Shaft Cap on. You could also glue that in too, if you wanted. You may then screw the two pieces together until the Barrel will still turn properly.
|
||||
|
||||
The Lock should be glued into the Front Block so that it will fit into the Barrel and keep it from turning without effort.
|
||||
|
||||
Once ALL glue is FULLY dried, you may try shooting it from a distance, e.g. clamp and string.
|
||||
|
||||
#### DISCLAIMER
|
||||
I take no responsibility of any kind for any legal issues, damage, injury or death that may occur due to use of or production of this design. It is untested and is by NO means guaranteed to function. Use common sense and be careful.
|
||||
|
||||
#### NOTES
|
||||
Looking back several months after designing it, I now realize that many major parts would be near impossible to print (Body, Hammer Slide, Front Block, Trigger Guard, etc.). I may fix some of these problems at some point, but it may be awhile.
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 556 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 583 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 598 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 586 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,480 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP203' ),
|
||||
'1' );
|
||||
FILE_NAME ('Barrel_Shaft.STEP',
|
||||
'2013-11-14T05:07:46',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = DIRECTION ( 'NONE', ( 0.4999999999999999400, -0.8660254037844387100, 0.0000000000000000000 ) ) ;
|
||||
#2 = AXIS2_PLACEMENT_3D ( 'NONE', #21, #189, #320 ) ;
|
||||
#3 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000000, 4.592425496802574000E-016, 53.75000000000000000 ) ) ;
|
||||
#4 = AXIS2_PLACEMENT_3D ( 'NONE', #75, #148, #257 ) ;
|
||||
#5 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 51.75000000000000000 ) ) ;
|
||||
#6 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ;
|
||||
#7 = AXIS2_PLACEMENT_3D ( 'NONE', #92, #1, #113 ) ;
|
||||
#8 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000000000, 1.469576158976823600E-016, 51.75000000000000000 ) ) ;
|
||||
#9 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ;
|
||||
#10 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#11 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
|
||||
#12 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#13 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ;
|
||||
#14 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 53.75000000000000000 ) ) ;
|
||||
#15 = AXIS2_PLACEMENT_3D ( 'NONE', #26, #163, #40 ) ;
|
||||
#16 = DIRECTION ( 'NONE', ( 0.8660254037844387100, 0.4999999999999999400, 0.0000000000000000000 ) ) ;
|
||||
#17 = AXIS2_PLACEMENT_3D ( 'NONE', #6, #389, #248 ) ;
|
||||
#18 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#19 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 53.75000000000000000 ) ) ;
|
||||
#20 = PLANE ( 'NONE', #63 ) ;
|
||||
#21 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ;
|
||||
#22 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#23 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#24 = AXIS2_PLACEMENT_3D ( 'NONE', #103, #202, #53 ) ;
|
||||
#25 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#26 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ;
|
||||
#27 = MECHANICAL_CONTEXT ( 'NONE', #453, 'mechanical' ) ;
|
||||
#28 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#29 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#30 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 51.75000000000000000 ) ) ;
|
||||
#31 = AXIS2_PLACEMENT_3D ( 'NONE', #12, #121, #38 ) ;
|
||||
#32 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#33 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ;
|
||||
#34 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 51.75000000000000000 ) ) ;
|
||||
#35 = DIRECTION ( 'NONE', ( -0.5000000000000001100, -0.8660254037844386000, 0.0000000000000000000 ) ) ;
|
||||
#36 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #122, #28 ) ;
|
||||
#37 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 53.75000000000000000 ) ) ;
|
||||
#38 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#39 = PRODUCT ( 'Barrel_Shaft', 'Barrel_Shaft', '', ( #27 ) ) ;
|
||||
#40 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#41 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#42 = AXIS2_PLACEMENT_3D ( 'NONE', #151, #35, #195 ) ;
|
||||
#43 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728918100, 53.75000000000000000 ) ) ;
|
||||
#44 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 51.75000000000000000 ) ) ;
|
||||
#45 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 51.75000000000000000 ) ) ;
|
||||
#46 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728917900, 53.75000000000000000 ) ) ;
|
||||
#47 = PLANE ( 'NONE', #68 ) ;
|
||||
#48 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ;
|
||||
#49 = AXIS2_PLACEMENT_3D ( 'NONE', #51, #256, #69 ) ;
|
||||
#50 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000000000, 1.469576158976823600E-016, 46.75000000000000000 ) ) ;
|
||||
#51 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#52 = AXIS2_PLACEMENT_3D ( 'NONE', #346, #82, #446 ) ;
|
||||
#53 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#54 = DIRECTION ( 'NONE', ( 0.5000000000000003300, 0.8660254037844386000, 0.0000000000000000000 ) ) ;
|
||||
#55 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#56 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000000, 4.592425496802574000E-016, 53.75000000000000000 ) ) ;
|
||||
#57 = DIRECTION ( 'NONE', ( -0.8660254037844384900, 0.5000000000000002200, 0.0000000000000000000 ) ) ;
|
||||
#58 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#59 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 51.75000000000000000 ) ) ;
|
||||
#60 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 51.75000000000000000 ) ) ;
|
||||
#61 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#62 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#63 = AXIS2_PLACEMENT_3D ( 'NONE', #33, #327, #77 ) ;
|
||||
#64 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #116, 'distance_accuracy_value', 'NONE');
|
||||
#65 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728918100, 51.75000000000000000 ) ) ;
|
||||
#66 = DIRECTION ( 'NONE', ( -0.8660254037844384900, 0.5000000000000002200, 0.0000000000000000000 ) ) ;
|
||||
#67 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
|
||||
#68 = AXIS2_PLACEMENT_3D ( 'NONE', #44, #32, #29 ) ;
|
||||
#69 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#70 = PLANE ( 'NONE', #17 ) ;
|
||||
#71 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#72 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#73 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#74 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#75 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ;
|
||||
#76 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#77 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#78 = DATE_TIME_ROLE ( 'classification_date' ) ;
|
||||
#79 = DIRECTION ( 'NONE', ( -0.5000000000000001100, 0.8660254037844387100, 0.0000000000000000000 ) ) ;
|
||||
#80 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 51.75000000000000000 ) ) ;
|
||||
#81 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude2', #451 ) ;
|
||||
#82 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#83 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;
|
||||
#84 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#85 = PLANE ( 'NONE', #24 ) ;
|
||||
#86 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 51.75000000000000000 ) ) ;
|
||||
#87 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#88 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#89 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#90 = AXIS2_PLACEMENT_3D ( 'NONE', #109, #62, #61 ) ;
|
||||
#91 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 51.75000000000000000 ) ) ;
|
||||
#92 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 51.75000000000000000 ) ) ;
|
||||
#93 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#94 = PLANE ( 'NONE', #42 ) ;
|
||||
#95 = APPROVAL_ROLE ( '' ) ;
|
||||
#96 = DESIGN_CONTEXT ( 'detailed design', #41, 'design' ) ;
|
||||
#97 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000000000, 1.469576158976823600E-016, 46.75000000000000000 ) ) ;
|
||||
#98 = PLANE ( 'NONE', #413 ) ;
|
||||
#99 = AXIS2_PLACEMENT_3D ( 'NONE', #179, #89, #88 ) ;
|
||||
#100 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#101 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#102 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Barrel_Shaft', ( #81, #315 ), #336 ) ;
|
||||
#103 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 51.75000000000000000 ) ) ;
|
||||
#104 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 51.75000000000000000 ) ) ;
|
||||
#105 = PLANE ( 'NONE', #99 ) ;
|
||||
#106 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 53.75000000000000000 ) ) ;
|
||||
#107 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#108 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728918100, 51.75000000000000000 ) ) ;
|
||||
#109 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#110 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#112 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#113 = DIRECTION ( 'NONE', ( 0.8660254037844387100, 0.4999999999999999400, 0.0000000000000000000 ) ) ;
|
||||
#114 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000000, 4.592425496802574000E-016, 0.0000000000000000000 ) ) ;
|
||||
#115 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 51.75000000000000000 ) ) ;
|
||||
#116 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#117 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#118 = APPROVAL_DATE_TIME ( #119, #283 ) ;
|
||||
#119 = DATE_AND_TIME ( #120, #123 ) ;
|
||||
#120 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#123 = LOCAL_TIME ( 15, 7, 46.00000000000000000, #125 ) ;
|
||||
#124 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 51.75000000000000000 ) ) ;
|
||||
#125 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#126 = APPROVAL_PERSON_ORGANIZATION ( #127, #283, #95 ) ;
|
||||
#127 = PERSON_AND_ORGANIZATION ( #83, #166 ) ;
|
||||
#128 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#129 = DATE_AND_TIME ( #131, #133 ) ;
|
||||
#130 = DIRECTION ( 'NONE', ( 0.8660254037844386000, -0.5000000000000001100, 0.0000000000000000000 ) ) ;
|
||||
#131 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#132 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 51.75000000000000000 ) ) ;
|
||||
#133 = LOCAL_TIME ( 15, 7, 46.00000000000000000, #134 ) ;
|
||||
#134 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#135 = PERSON_AND_ORGANIZATION ( #83, #166 ) ;
|
||||
#136 = PERSON_AND_ORGANIZATION ( #83, #166 ) ;
|
||||
#137 = PERSON_AND_ORGANIZATION ( #83, #166 ) ;
|
||||
#138 = APPROVAL_DATE_TIME ( #139, #300 ) ;
|
||||
#139 = DATE_AND_TIME ( #140, #141 ) ;
|
||||
#140 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#141 = LOCAL_TIME ( 15, 7, 46.00000000000000000, #142 ) ;
|
||||
#142 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#143 = APPROVAL_PERSON_ORGANIZATION ( #145, #300, #454 ) ;
|
||||
#144 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728918100, 51.75000000000000000 ) ) ;
|
||||
#145 = PERSON_AND_ORGANIZATION ( #83, #166 ) ;
|
||||
#146 = DATE_AND_TIME ( #147, #149 ) ;
|
||||
#147 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#148 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#149 = LOCAL_TIME ( 15, 7, 46.00000000000000000, #152 ) ;
|
||||
#150 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 53.75000000000000000 ) ) ;
|
||||
#151 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 51.75000000000000000 ) ) ;
|
||||
#152 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#153 = PERSON_AND_ORGANIZATION ( #83, #166 ) ;
|
||||
#154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#155 = APPROVAL_DATE_TIME ( #156, #311 ) ;
|
||||
#156 = DATE_AND_TIME ( #157, #158 ) ;
|
||||
#157 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#158 = LOCAL_TIME ( 15, 7, 46.00000000000000000, #159 ) ;
|
||||
#159 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#160 = APPROVAL_PERSON_ORGANIZATION ( #161, #311, #278 ) ;
|
||||
#161 = PERSON_AND_ORGANIZATION ( #83, #166 ) ;
|
||||
#162 = PERSON_AND_ORGANIZATION ( #83, #166 ) ;
|
||||
#163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#164 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
|
||||
#165 = FACE_OUTER_BOUND ( 'NONE', #420, .T. ) ;
|
||||
#166 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ;
|
||||
#167 = VECTOR ( 'NONE', #128, 1000.000000000000000 ) ;
|
||||
#168 = LINE ( 'NONE', #108, #167 ) ;
|
||||
#169 = VECTOR ( 'NONE', #93, 1000.000000000000000 ) ;
|
||||
#170 = DIRECTION ( 'NONE', ( -0.8660254037844386000, -0.5000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#171 = SHAPE_DEFINITION_REPRESENTATION ( #409, #102 ) ;
|
||||
#172 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 53.75000000000000000 ) ) ;
|
||||
#173 = LINE ( 'NONE', #325, #169 ) ;
|
||||
#174 = VECTOR ( 'NONE', #295, 999.9999999999998900 ) ;
|
||||
#175 = LINE ( 'NONE', #30, #176 ) ;
|
||||
#176 = VECTOR ( 'NONE', #58, 1000.000000000000000 ) ;
|
||||
#177 = VECTOR ( 'NONE', #170, 1000.000000000000200 ) ;
|
||||
#178 = LINE ( 'NONE', #124, #174 ) ;
|
||||
#179 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 51.75000000000000000 ) ) ;
|
||||
#180 = VECTOR ( 'NONE', #74, 1000.000000000000000 ) ;
|
||||
#181 = PLANE ( 'NONE', #90 ) ;
|
||||
#182 = AXIS2_PLACEMENT_3D ( 'NONE', #132, #111, #110 ) ;
|
||||
#183 = LINE ( 'NONE', #233, #180 ) ;
|
||||
#184 = CIRCLE ( 'NONE', #354, 1.200000000000000000 ) ;
|
||||
#185 = LINE ( 'NONE', #14, #177 ) ;
|
||||
#186 = VECTOR ( 'NONE', #130, 1000.000000000000000 ) ;
|
||||
#187 = DIRECTION ( 'NONE', ( 0.8660254037844386000, -0.5000000000000001100, 0.0000000000000000000 ) ) ;
|
||||
#188 = LINE ( 'NONE', #43, #191 ) ;
|
||||
#189 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#190 = VECTOR ( 'NONE', #16, 999.9999999999998900 ) ;
|
||||
#191 = VECTOR ( 'NONE', #57, 1000.000000000000200 ) ;
|
||||
#192 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#193 = LINE ( 'NONE', #340, #190 ) ;
|
||||
#194 = VECTOR ( 'NONE', #154, 1000.000000000000000 ) ;
|
||||
#195 = DIRECTION ( 'NONE', ( 0.8660254037844386000, -0.5000000000000001100, 0.0000000000000000000 ) ) ;
|
||||
#196 = CYLINDRICAL_SURFACE ( 'NONE', #373, 3.750000000000000000 ) ;
|
||||
#197 = CIRCLE ( 'NONE', #396, 1.200000000000000000 ) ;
|
||||
#198 = FACE_OUTER_BOUND ( 'NONE', #456, .T. ) ;
|
||||
#199 = LINE ( 'NONE', #37, #186 ) ;
|
||||
#200 = CYLINDRICAL_SURFACE ( 'NONE', #382, 1.200000000000000000 ) ;
|
||||
#201 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 53.75000000000000000 ) ) ;
|
||||
#202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#203 = FACE_OUTER_BOUND ( 'NONE', #394, .T. ) ;
|
||||
#204 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#205 = VECTOR ( 'NONE', #66, 1000.000000000000200 ) ;
|
||||
#206 = LINE ( 'NONE', #201, #194 ) ;
|
||||
#207 = CYLINDRICAL_SURFACE ( 'NONE', #2, 3.750000000000000000 ) ;
|
||||
#208 = CIRCLE ( 'NONE', #15, 3.750000000000000000 ) ;
|
||||
#209 = LINE ( 'NONE', #144, #205 ) ;
|
||||
#210 = CIRCLE ( 'NONE', #49, 3.750000000000000000 ) ;
|
||||
#211 = CYLINDRICAL_SURFACE ( 'NONE', #4, 1.200000000000000000 ) ;
|
||||
#212 = FACE_OUTER_BOUND ( 'NONE', #406, .T. ) ;
|
||||
#213 = FACE_OUTER_BOUND ( 'NONE', #395, .T. ) ;
|
||||
#214 = VECTOR ( 'NONE', #246, 1000.000000000000000 ) ;
|
||||
#215 = FACE_OUTER_BOUND ( 'NONE', #362, .T. ) ;
|
||||
#216 = LINE ( 'NONE', #48, #214 ) ;
|
||||
#217 = FACE_OUTER_BOUND ( 'NONE', #275, .T. ) ;
|
||||
#218 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728918100, 51.75000000000000000 ) ) ;
|
||||
#219 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #41 ) ;
|
||||
#220 = LINE ( 'NONE', #80, #222 ) ;
|
||||
#221 = FACE_BOUND ( 'NONE', #341, .T. ) ;
|
||||
#222 = VECTOR ( 'NONE', #440, 1000.000000000000000 ) ;
|
||||
#223 = FACE_OUTER_BOUND ( 'NONE', #268, .T. ) ;
|
||||
#224 = EDGE_CURVE ( 'NONE', #442, #419, #260, .T. ) ;
|
||||
#225 = FACE_BOUND ( 'NONE', #450, .T. ) ;
|
||||
#226 = VECTOR ( 'NONE', #72, 1000.000000000000000 ) ;
|
||||
#227 = FACE_OUTER_BOUND ( 'NONE', #448, .T. ) ;
|
||||
#228 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000000000, 0.0000000000000000000, 51.75000000000000000 ) ) ;
|
||||
#229 = VECTOR ( 'NONE', #286, 1000.000000000000200 ) ;
|
||||
#230 = CIRCLE ( 'NONE', #31, 3.750000000000000000 ) ;
|
||||
#231 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ;
|
||||
#232 = VECTOR ( 'NONE', #204, 1000.000000000000000 ) ;
|
||||
#233 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 53.75000000000000000 ) ) ;
|
||||
#234 = LINE ( 'NONE', #97, #232 ) ;
|
||||
#235 = LINE ( 'NONE', #56, #226 ) ;
|
||||
#236 = VECTOR ( 'NONE', #264, 1000.000000000000000 ) ;
|
||||
#237 = LINE ( 'NONE', #104, #229 ) ;
|
||||
#238 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#239 = FACE_OUTER_BOUND ( 'NONE', #355, .T. ) ;
|
||||
#240 = LINE ( 'NONE', #5, #236 ) ;
|
||||
#241 = LINE ( 'NONE', #115, #242 ) ;
|
||||
#242 = VECTOR ( 'NONE', #23, 1000.000000000000000 ) ;
|
||||
#243 = CIRCLE ( 'NONE', #36, 3.750000000000000000 ) ;
|
||||
#244 = FACE_OUTER_BOUND ( 'NONE', #457, .T. ) ;
|
||||
#245 = CIRCLE ( 'NONE', #52, 1.200000000000000000 ) ;
|
||||
#246 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#247 = VECTOR ( 'NONE', #73, 1000.000000000000000 ) ;
|
||||
#248 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#249 = FACE_OUTER_BOUND ( 'NONE', #417, .T. ) ;
|
||||
#250 = FACE_OUTER_BOUND ( 'NONE', #266, .T. ) ;
|
||||
#251 = VECTOR ( 'NONE', #187, 1000.000000000000000 ) ;
|
||||
#252 = LINE ( 'NONE', #60, #247 ) ;
|
||||
#253 = PLANE ( 'NONE', #329 ) ;
|
||||
#254 = FACE_OUTER_BOUND ( 'NONE', #405, .T. ) ;
|
||||
#255 = VECTOR ( 'NONE', #18, 1000.000000000000000 ) ;
|
||||
#256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#257 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#258 = CIRCLE ( 'NONE', #182, 1.200000000000000000 ) ;
|
||||
#259 = VECTOR ( 'NONE', #238, 1000.000000000000000 ) ;
|
||||
#260 = LINE ( 'NONE', #463, #259 ) ;
|
||||
#261 = LINE ( 'NONE', #91, #251 ) ;
|
||||
#262 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ;
|
||||
#263 = ORIENTED_EDGE ( 'NONE', *, *, #415, .F. ) ;
|
||||
#264 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#265 = ORIENTED_EDGE ( 'NONE', *, *, #365, .F. ) ;
|
||||
#266 = EDGE_LOOP ( 'NONE', ( #267, #265 ) ) ;
|
||||
#267 = ORIENTED_EDGE ( 'NONE', *, *, #391, .F. ) ;
|
||||
#268 = EDGE_LOOP ( 'NONE', ( #282, #284, #289, #291 ) ) ;
|
||||
#269 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ;
|
||||
#270 = ORIENTED_EDGE ( 'NONE', *, *, #359, .T. ) ;
|
||||
#271 = ORIENTED_EDGE ( 'NONE', *, *, #393, .T. ) ;
|
||||
#272 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #39 ) ) ;
|
||||
#273 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#274 = CC_DESIGN_SECURITY_CLASSIFICATION ( #288, ( #301 ) ) ;
|
||||
#275 = EDGE_LOOP ( 'NONE', ( #269, #270 ) ) ;
|
||||
#276 = DIRECTION ( 'NONE', ( -0.8660254037844384900, 0.5000000000000002200, 0.0000000000000000000 ) ) ;
|
||||
#277 = ORIENTED_EDGE ( 'NONE', *, *, #423, .F. ) ;
|
||||
#278 = APPROVAL_ROLE ( '' ) ;
|
||||
#279 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ;
|
||||
#280 = ORIENTED_EDGE ( 'NONE', *, *, #425, .T. ) ;
|
||||
#281 = CC_DESIGN_APPROVAL ( #283, ( #288 ) ) ;
|
||||
#282 = ORIENTED_EDGE ( 'NONE', *, *, #400, .T. ) ;
|
||||
#283 = APPROVAL ( #433, 'UNSPECIFIED' ) ;
|
||||
#284 = ORIENTED_EDGE ( 'NONE', *, *, #425, .F. ) ;
|
||||
#285 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #129, #78, ( #288 ) ) ;
|
||||
#286 = DIRECTION ( 'NONE', ( -0.8660254037844386000, -0.5000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#287 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #135, #328, ( #288 ) ) ;
|
||||
#288 = SECURITY_CLASSIFICATION ( '', '', #67 ) ;
|
||||
#289 = ORIENTED_EDGE ( 'NONE', *, *, #418, .F. ) ;
|
||||
#290 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #136, #11, ( #301 ) ) ;
|
||||
#291 = ORIENTED_EDGE ( 'NONE', *, *, #314, .T. ) ;
|
||||
#292 = ORIENTED_EDGE ( 'NONE', *, *, #402, .T. ) ;
|
||||
#293 = ORIENTED_EDGE ( 'NONE', *, *, #314, .F. ) ;
|
||||
#294 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #137, #101, ( #301 ) ) ;
|
||||
#295 = DIRECTION ( 'NONE', ( 0.8660254037844387100, 0.4999999999999999400, 0.0000000000000000000 ) ) ;
|
||||
#296 = ORIENTED_EDGE ( 'NONE', *, *, #333, .F. ) ;
|
||||
#297 = CC_DESIGN_APPROVAL ( #300, ( #301 ) ) ;
|
||||
#298 = ORIENTED_EDGE ( 'NONE', *, *, #342, .T. ) ;
|
||||
#299 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ;
|
||||
#300 = APPROVAL ( #84, 'UNSPECIFIED' ) ;
|
||||
#301 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #39, .NOT_KNOWN. ) ;
|
||||
#302 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #146, #376, ( #312 ) ) ;
|
||||
#303 = ORIENTED_EDGE ( 'NONE', *, *, #342, .F. ) ;
|
||||
#304 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #153, #71, ( #312 ) ) ;
|
||||
#305 = ORIENTED_EDGE ( 'NONE', *, *, #345, .F. ) ;
|
||||
#306 = CC_DESIGN_APPROVAL ( #311, ( #312 ) ) ;
|
||||
#307 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ;
|
||||
#308 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ;
|
||||
#309 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ;
|
||||
#310 = ORIENTED_EDGE ( 'NONE', *, *, #360, .F. ) ;
|
||||
#311 = APPROVAL ( #55, 'UNSPECIFIED' ) ;
|
||||
#312 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #301, #96 ) ;
|
||||
#313 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #162, #164, ( #39 ) ) ;
|
||||
#314 = EDGE_CURVE ( 'NONE', #411, #424, #455, .T. ) ;
|
||||
#315 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #10, #117 ) ;
|
||||
#316 = ORIENTED_EDGE ( 'NONE', *, *, #369, .T. ) ;
|
||||
#317 = ORIENTED_EDGE ( 'NONE', *, *, #415, .T. ) ;
|
||||
#318 = ORIENTED_EDGE ( 'NONE', *, *, #378, .F. ) ;
|
||||
#319 = ORIENTED_EDGE ( 'NONE', *, *, #369, .F. ) ;
|
||||
#320 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#321 = ORIENTED_EDGE ( 'NONE', *, *, #386, .F. ) ;
|
||||
#322 = VERTEX_POINT ( 'NONE', #19 ) ;
|
||||
#323 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ;
|
||||
#324 = ORIENTED_EDGE ( 'NONE', *, *, #224, .F. ) ;
|
||||
#325 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 51.75000000000000000 ) ) ;
|
||||
#326 = EDGE_CURVE ( 'NONE', #357, #419, #258, .T. ) ;
|
||||
#327 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#328 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
|
||||
#329 = AXIS2_PLACEMENT_3D ( 'NONE', #330, #79, #436 ) ;
|
||||
#330 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 51.75000000000000000 ) ) ;
|
||||
#331 = ORIENTED_EDGE ( 'NONE', *, *, #423, .T. ) ;
|
||||
#332 = ORIENTED_EDGE ( 'NONE', *, *, #398, .F. ) ;
|
||||
#333 = EDGE_CURVE ( 'NONE', #422, #411, #261, .T. ) ;
|
||||
#334 = ORIENTED_EDGE ( 'NONE', *, *, #326, .F. ) ;
|
||||
#335 = ADVANCED_FACE ( 'NONE', ( #254 ), #105, .F. ) ;
|
||||
#336 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #64 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #116, #25, #273 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#337 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ;
|
||||
#338 = ADVANCED_FACE ( 'NONE', ( #250 ), #181, .F. ) ;
|
||||
#339 = ORIENTED_EDGE ( 'NONE', *, *, #386, .T. ) ;
|
||||
#340 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 53.75000000000000000 ) ) ;
|
||||
#341 = EDGE_LOOP ( 'NONE', ( #388, #392, #385, #390, #262, #263 ) ) ;
|
||||
#342 = EDGE_CURVE ( 'NONE', #422, #421, #252, .T. ) ;
|
||||
#343 = ADVANCED_FACE ( 'NONE', ( #249 ), #47, .F. ) ;
|
||||
#344 = ADVANCED_FACE ( 'NONE', ( #244 ), #20, .T. ) ;
|
||||
#345 = EDGE_CURVE ( 'NONE', #383, #422, #241, .T. ) ;
|
||||
#346 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ;
|
||||
#347 = ADVANCED_FACE ( 'NONE', ( #239 ), #94, .F. ) ;
|
||||
#348 = ORIENTED_EDGE ( 'NONE', *, *, #360, .T. ) ;
|
||||
#349 = EDGE_CURVE ( 'NONE', #452, #442, #245, .T. ) ;
|
||||
#350 = ORIENTED_EDGE ( 'NONE', *, *, #345, .T. ) ;
|
||||
#351 = ORIENTED_EDGE ( 'NONE', *, *, #333, .T. ) ;
|
||||
#352 = EDGE_CURVE ( 'NONE', #383, #441, #240, .T. ) ;
|
||||
#353 = ORIENTED_EDGE ( 'NONE', *, *, #418, .T. ) ;
|
||||
#354 = AXIS2_PLACEMENT_3D ( 'NONE', #403, #87, #462 ) ;
|
||||
#355 = EDGE_LOOP ( 'NONE', ( #292, #293, #296, #298 ) ) ;
|
||||
#356 = ORIENTED_EDGE ( 'NONE', *, *, #358, .F. ) ;
|
||||
#357 = VERTEX_POINT ( 'NONE', #8 ) ;
|
||||
#358 = EDGE_CURVE ( 'NONE', #452, #357, #234, .T. ) ;
|
||||
#359 = EDGE_CURVE ( 'NONE', #435, #431, #243, .T. ) ;
|
||||
#360 = EDGE_CURVE ( 'NONE', #449, #383, #237, .T. ) ;
|
||||
#361 = EDGE_CURVE ( 'NONE', #435, #437, #235, .T. ) ;
|
||||
#362 = EDGE_LOOP ( 'NONE', ( #317, #319, #321, #331 ) ) ;
|
||||
#363 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ;
|
||||
#364 = ORIENTED_EDGE ( 'NONE', *, *, #224, .T. ) ;
|
||||
#365 = EDGE_CURVE ( 'NONE', #437, #404, #230, .T. ) ;
|
||||
#366 = ORIENTED_EDGE ( 'NONE', *, *, #398, .T. ) ;
|
||||
#367 = ADVANCED_FACE ( 'NONE', ( #225, #227 ), #85, .T. ) ;
|
||||
#368 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #453 ) ;
|
||||
#369 = EDGE_CURVE ( 'NONE', #449, #322, #220, .T. ) ;
|
||||
#370 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ;
|
||||
#371 = ADVANCED_FACE ( 'NONE', ( #221, #217 ), #70, .T. ) ;
|
||||
#372 = ORIENTED_EDGE ( 'NONE', *, *, #349, .T. ) ;
|
||||
#373 = AXIS2_PLACEMENT_3D ( 'NONE', #323, #192, #76 ) ;
|
||||
#374 = ADVANCED_FACE ( 'NONE', ( #223 ), #429, .F. ) ;
|
||||
#375 = VERTEX_POINT ( 'NONE', #65 ) ;
|
||||
#376 = DATE_TIME_ROLE ( 'creation_date' ) ;
|
||||
#377 = ADVANCED_FACE ( 'NONE', ( #212 ), #211, .F. ) ;
|
||||
#378 = EDGE_CURVE ( 'NONE', #431, #404, #216, .T. ) ;
|
||||
#379 = ADVANCED_FACE ( 'NONE', ( #213 ), #207, .T. ) ;
|
||||
#380 = EDGE_CURVE ( 'NONE', #431, #435, #208, .T. ) ;
|
||||
#381 = ADVANCED_FACE ( 'NONE', ( #215 ), #98, .F. ) ;
|
||||
#382 = AXIS2_PLACEMENT_3D ( 'NONE', #9, #112, #22 ) ;
|
||||
#383 = VERTEX_POINT ( 'NONE', #428 ) ;
|
||||
#384 = ADVANCED_FACE ( 'NONE', ( #203 ), #200, .F. ) ;
|
||||
#385 = ORIENTED_EDGE ( 'NONE', *, *, #402, .F. ) ;
|
||||
#386 = EDGE_CURVE ( 'NONE', #375, #449, #209, .T. ) ;
|
||||
#387 = ADVANCED_FACE ( 'NONE', ( #198 ), #196, .T. ) ;
|
||||
#388 = ORIENTED_EDGE ( 'NONE', *, *, #393, .F. ) ;
|
||||
#389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#390 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ;
|
||||
#391 = EDGE_CURVE ( 'NONE', #404, #437, #210, .T. ) ;
|
||||
#392 = ORIENTED_EDGE ( 'NONE', *, *, #400, .F. ) ;
|
||||
#393 = EDGE_CURVE ( 'NONE', #458, #408, #206, .T. ) ;
|
||||
#394 = EDGE_LOOP ( 'NONE', ( #356, #363, #364, #366 ) ) ;
|
||||
#395 = EDGE_LOOP ( 'NONE', ( #401, #426, #432, #412 ) ) ;
|
||||
#396 = AXIS2_PLACEMENT_3D ( 'NONE', #86, #460, #107 ) ;
|
||||
#397 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 53.75000000000000000 ) ) ;
|
||||
#398 = EDGE_CURVE ( 'NONE', #419, #357, #197, .T. ) ;
|
||||
#399 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#400 = EDGE_CURVE ( 'NONE', #424, #458, #193, .T. ) ;
|
||||
#401 = ORIENTED_EDGE ( 'NONE', *, *, #361, .F. ) ;
|
||||
#402 = EDGE_CURVE ( 'NONE', #421, #424, #199, .T. ) ;
|
||||
#403 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ;
|
||||
#404 = VERTEX_POINT ( 'NONE', #399 ) ;
|
||||
#405 = EDGE_LOOP ( 'NONE', ( #271, #277, #279, #280 ) ) ;
|
||||
#406 = EDGE_LOOP ( 'NONE', ( #439, #434, #438, #324 ) ) ;
|
||||
#407 = EDGE_CURVE ( 'NONE', #442, #452, #184, .T. ) ;
|
||||
#408 = VERTEX_POINT ( 'NONE', #46 ) ;
|
||||
#409 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #312 ) ;
|
||||
#410 = EDGE_CURVE ( 'NONE', #441, #421, #183, .T. ) ;
|
||||
#411 = VERTEX_POINT ( 'NONE', #59 ) ;
|
||||
#412 = ORIENTED_EDGE ( 'NONE', *, *, #391, .T. ) ;
|
||||
#413 = AXIS2_PLACEMENT_3D ( 'NONE', #218, #54, #276 ) ;
|
||||
#414 = EDGE_CURVE ( 'NONE', #322, #441, #185, .T. ) ;
|
||||
#415 = EDGE_CURVE ( 'NONE', #408, #322, #188, .T. ) ;
|
||||
#416 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 51.75000000000000000 ) ) ;
|
||||
#417 = EDGE_LOOP ( 'NONE', ( #299, #303, #305, #307 ) ) ;
|
||||
#418 = EDGE_CURVE ( 'NONE', #411, #444, #178, .T. ) ;
|
||||
#419 = VERTEX_POINT ( 'NONE', #228 ) ;
|
||||
#420 = EDGE_LOOP ( 'NONE', ( #308, #309, #310, #316 ) ) ;
|
||||
#421 = VERTEX_POINT ( 'NONE', #397 ) ;
|
||||
#422 = VERTEX_POINT ( 'NONE', #459 ) ;
|
||||
#423 = EDGE_CURVE ( 'NONE', #375, #408, #168, .T. ) ;
|
||||
#424 = VERTEX_POINT ( 'NONE', #106 ) ;
|
||||
#425 = EDGE_CURVE ( 'NONE', #444, #458, #175, .T. ) ;
|
||||
#426 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ;
|
||||
#427 = EDGE_CURVE ( 'NONE', #444, #375, #173, .T. ) ;
|
||||
#428 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 51.75000000000000000 ) ) ;
|
||||
#429 = PLANE ( 'NONE', #7 ) ;
|
||||
#430 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ;
|
||||
#431 = VERTEX_POINT ( 'NONE', #231 ) ;
|
||||
#432 = ORIENTED_EDGE ( 'NONE', *, *, #378, .T. ) ;
|
||||
#433 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#434 = ORIENTED_EDGE ( 'NONE', *, *, #358, .T. ) ;
|
||||
#435 = VERTEX_POINT ( 'NONE', #3 ) ;
|
||||
#436 = DIRECTION ( 'NONE', ( -0.8660254037844386000, -0.5000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#437 = VERTEX_POINT ( 'NONE', #114 ) ;
|
||||
#438 = ORIENTED_EDGE ( 'NONE', *, *, #326, .T. ) ;
|
||||
#439 = ORIENTED_EDGE ( 'NONE', *, *, #349, .F. ) ;
|
||||
#440 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#441 = VERTEX_POINT ( 'NONE', #172 ) ;
|
||||
#442 = VERTEX_POINT ( 'NONE', #430 ) ;
|
||||
#443 = ORIENTED_EDGE ( 'NONE', *, *, #365, .T. ) ;
|
||||
#444 = VERTEX_POINT ( 'NONE', #34 ) ;
|
||||
#445 = ORIENTED_EDGE ( 'NONE', *, *, #361, .T. ) ;
|
||||
#446 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#447 = ORIENTED_EDGE ( 'NONE', *, *, #359, .F. ) ;
|
||||
#448 = EDGE_LOOP ( 'NONE', ( #337, #339, #348, #350, #351, #353 ) ) ;
|
||||
#449 = VERTEX_POINT ( 'NONE', #45 ) ;
|
||||
#450 = EDGE_LOOP ( 'NONE', ( #332, #334 ) ) ;
|
||||
#451 = CLOSED_SHELL ( 'NONE', ( #377, #387, #379, #371, #338, #335, #374, #347, #343, #461, #381, #367, #384, #344 ) ) ;
|
||||
#452 = VERTEX_POINT ( 'NONE', #50 ) ;
|
||||
#453 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#454 = APPROVAL_ROLE ( '' ) ;
|
||||
#455 = LINE ( 'NONE', #416, #255 ) ;
|
||||
#456 = EDGE_LOOP ( 'NONE', ( #447, #445, #443, #318 ) ) ;
|
||||
#457 = EDGE_LOOP ( 'NONE', ( #370, #372 ) ) ;
|
||||
#458 = VERTEX_POINT ( 'NONE', #150 ) ;
|
||||
#459 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 51.75000000000000000 ) ) ;
|
||||
#460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#461 = ADVANCED_FACE ( 'NONE', ( #165 ), #253, .F. ) ;
|
||||
#462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#463 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
|
|
@ -0,0 +1,368 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP203' ),
|
||||
'1' );
|
||||
FILE_NAME ('Barrel_Shaft_Cap.STEP',
|
||||
'2013-11-14T05:07:31',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #123, #233, ( #32 ) ) ;
|
||||
#2 = AXIS2_PLACEMENT_3D ( 'NONE', #42, #212, #75 ) ;
|
||||
#3 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#4 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
|
||||
#5 = AXIS2_PLACEMENT_3D ( 'NONE', #258, #117, #24 ) ;
|
||||
#6 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#7 = CC_DESIGN_APPROVAL ( #25, ( #32 ) ) ;
|
||||
#8 = ORIENTED_EDGE ( 'NONE', *, *, #312, .F. ) ;
|
||||
#9 = VERTEX_POINT ( 'NONE', #243 ) ;
|
||||
#10 = APPROVAL_PERSON_ORGANIZATION ( #188, #345, #326 ) ;
|
||||
#11 = ORIENTED_EDGE ( 'NONE', *, *, #308, .T. ) ;
|
||||
#12 = VERTEX_POINT ( 'NONE', #217 ) ;
|
||||
#13 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#14 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#15 = LINE ( 'NONE', #19, #240 ) ;
|
||||
#16 = LINE ( 'NONE', #66, #269 ) ;
|
||||
#17 = AXIS2_PLACEMENT_3D ( 'NONE', #210, #283, #238 ) ;
|
||||
#18 = AXIS2_PLACEMENT_3D ( 'NONE', #250, #107, #189 ) ;
|
||||
#19 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000005300, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#20 = ORIENTED_EDGE ( 'NONE', *, *, #300, .F. ) ;
|
||||
#21 = PLANE ( 'NONE', #267 ) ;
|
||||
#22 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000011500, 1.469576158976838300E-016, 3.399999999999995900 ) ) ;
|
||||
#23 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#24 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#25 = APPROVAL ( #37, 'UNSPECIFIED' ) ;
|
||||
#26 = CYLINDRICAL_SURFACE ( 'NONE', #271, 5.000000000000000900 ) ;
|
||||
#27 = CIRCLE ( 'NONE', #49, 1.200000000000011700 ) ;
|
||||
#28 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#29 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #347, #68, ( #32 ) ) ;
|
||||
#30 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
|
||||
#31 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#32 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #348, #171 ) ;
|
||||
#33 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#34 = ORIENTED_EDGE ( 'NONE', *, *, #321, .F. ) ;
|
||||
#35 = LOCAL_TIME ( 15, 7, 31.00000000000000000, #96 ) ;
|
||||
#36 = CYLINDRICAL_SURFACE ( 'NONE', #222, 3.189999999999995100 ) ;
|
||||
#37 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#38 = CARTESIAN_POINT ( 'NONE', ( 4.094999999999998000, 0.0000000000000000000, 4.094999999999997100 ) ) ;
|
||||
#39 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #33, 'distance_accuracy_value', 'NONE');
|
||||
#40 = CYLINDRICAL_SURFACE ( 'NONE', #274, 1.200000000000005300 ) ;
|
||||
#41 = CIRCLE ( 'NONE', #106, 5.000000000000000900 ) ;
|
||||
#42 = CARTESIAN_POINT ( 'NONE', ( -4.094999999999998000, 5.014928642508409500E-016, 4.094999999999997100 ) ) ;
|
||||
#43 = ORIENTED_EDGE ( 'NONE', *, *, #322, .T. ) ;
|
||||
#44 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#45 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#46 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#47 = AXIS2_PLACEMENT_3D ( 'NONE', #201, #59, #224 ) ;
|
||||
#48 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ;
|
||||
#49 = AXIS2_PLACEMENT_3D ( 'NONE', #128, #319, #150 ) ;
|
||||
#50 = ORIENTED_EDGE ( 'NONE', *, *, #322, .F. ) ;
|
||||
#51 = PERSON_AND_ORGANIZATION ( #52, #211 ) ;
|
||||
#52 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;
|
||||
#53 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#54 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#55 = LINE ( 'NONE', #249, #307 ) ;
|
||||
#56 = ORIENTED_EDGE ( 'NONE', *, *, #289, .T. ) ;
|
||||
#57 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#58 = EDGE_LOOP ( 'NONE', ( #213, #89 ) ) ;
|
||||
#59 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#60 = EDGE_LOOP ( 'NONE', ( #121, #184, #247, #341 ) ) ;
|
||||
#61 = EDGE_CURVE ( 'NONE', #346, #132, #234, .T. ) ;
|
||||
#62 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#63 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#64 = EDGE_LOOP ( 'NONE', ( #20, #218, #231, #94 ) ) ;
|
||||
#65 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#66 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000005300, 1.469576158976830500E-016, 5.000000000000000000 ) ) ;
|
||||
#67 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#68 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#69 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#70 = ORIENTED_EDGE ( 'NONE', *, *, #308, .F. ) ;
|
||||
#71 = FACE_OUTER_BOUND ( 'NONE', #242, .T. ) ;
|
||||
#72 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#73 = VERTEX_POINT ( 'NONE', #197 ) ;
|
||||
#74 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#75 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.224646799147353700E-016, 0.0000000000000000000 ) ) ;
|
||||
#76 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #54, #62 ) ;
|
||||
#77 = ORIENTED_EDGE ( 'NONE', *, *, #304, .F. ) ;
|
||||
#78 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#79 = SHAPE_DEFINITION_REPRESENTATION ( #228, #126 ) ;
|
||||
#80 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#81 = PERSON_AND_ORGANIZATION ( #52, #211 ) ;
|
||||
#82 = ORIENTED_EDGE ( 'NONE', *, *, #311, .T. ) ;
|
||||
#83 = LOCAL_TIME ( 15, 7, 31.00000000000000000, #74 ) ;
|
||||
#84 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 6.123233995736767300E-016, 5.000000000000000000 ) ) ;
|
||||
#85 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #39 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #33, #205, #67 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#86 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #110 ) ;
|
||||
#87 = ORIENTED_EDGE ( 'NONE', *, *, #315, .T. ) ;
|
||||
#88 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#89 = ORIENTED_EDGE ( 'NONE', *, *, #161, .F. ) ;
|
||||
#90 = FACE_BOUND ( 'NONE', #195, .T. ) ;
|
||||
#91 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#92 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#93 = CARTESIAN_POINT ( 'NONE', ( 3.189999999999995100, 0.0000000000000000000, 3.399999999999995900 ) ) ;
|
||||
#94 = ORIENTED_EDGE ( 'NONE', *, *, #321, .T. ) ;
|
||||
#95 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#96 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#97 = CYLINDRICAL_SURFACE ( 'NONE', #17, 3.189999999999995100 ) ;
|
||||
#98 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#99 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000005300, 1.469576158976830500E-016, 0.0000000000000000000 ) ) ;
|
||||
#100 = PRODUCT ( 'Barrel_Shaft_Cap', 'Barrel_Shaft_Cap', '', ( #330 ) ) ;
|
||||
#101 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#102 = AXIS2_PLACEMENT_3D ( 'NONE', #72, #235, #88 ) ;
|
||||
#103 = FACE_OUTER_BOUND ( 'NONE', #64, .T. ) ;
|
||||
#104 = AXIS2_PLACEMENT_3D ( 'NONE', #178, #28, #203 ) ;
|
||||
#105 = MANIFOLD_SOLID_BREP ( 'Fillet1', #158 ) ;
|
||||
#106 = AXIS2_PLACEMENT_3D ( 'NONE', #255, #111, #131 ) ;
|
||||
#107 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#108 = ORIENTED_EDGE ( 'NONE', *, *, #287, .T. ) ;
|
||||
#109 = LOCAL_TIME ( 15, 7, 31.00000000000000000, #172 ) ;
|
||||
#110 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#112 = CIRCLE ( 'NONE', #282, 5.000000000000000900 ) ;
|
||||
#113 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#114 = AXIS2_PLACEMENT_3D ( 'NONE', #38, #208, #69 ) ;
|
||||
#115 = ORIENTED_EDGE ( 'NONE', *, *, #285, .F. ) ;
|
||||
#116 = APPROVAL_DATE_TIME ( #181, #345 ) ;
|
||||
#117 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#118 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ;
|
||||
#119 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#120 = VECTOR ( 'NONE', #31, 1000.000000000000000 ) ;
|
||||
#121 = ORIENTED_EDGE ( 'NONE', *, *, #297, .F. ) ;
|
||||
#122 = EDGE_LOOP ( 'NONE', ( #207, #264, #11, #87 ) ) ;
|
||||
#123 = DATE_AND_TIME ( #252, #83 ) ;
|
||||
#124 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#125 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#126 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Barrel_Shaft_Cap', ( #105, #165 ), #85 ) ;
|
||||
#127 = CARTESIAN_POINT ( 'NONE', ( -3.189999999999995100, 3.906623289280050800E-016, 5.000000000000000000 ) ) ;
|
||||
#128 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 3.399999999999995900 ) ) ;
|
||||
#129 = ORIENTED_EDGE ( 'NONE', *, *, #161, .T. ) ;
|
||||
#130 = VECTOR ( 'NONE', #140, 1000.000000000000000 ) ;
|
||||
#131 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#132 = VERTEX_POINT ( 'NONE', #173 ) ;
|
||||
#133 = APPROVAL_DATE_TIME ( #144, #25 ) ;
|
||||
#134 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#135 = ORIENTED_EDGE ( 'NONE', *, *, #311, .F. ) ;
|
||||
#136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#137 = CIRCLE ( 'NONE', #114, 0.9050000000000030200 ) ;
|
||||
#138 = APPROVAL_PERSON_ORGANIZATION ( #81, #25, #206 ) ;
|
||||
#139 = ORIENTED_EDGE ( 'NONE', *, *, #289, .F. ) ;
|
||||
#140 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#141 = LINE ( 'NONE', #301, #130 ) ;
|
||||
#142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#143 = VERTEX_POINT ( 'NONE', #93 ) ;
|
||||
#144 = DATE_AND_TIME ( #257, #196 ) ;
|
||||
#145 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#147 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#148 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #202, #157, ( #100 ) ) ;
|
||||
#149 = ORIENTED_EDGE ( 'NONE', *, *, #317, .T. ) ;
|
||||
#150 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#151 = FACE_OUTER_BOUND ( 'NONE', #58, .T. ) ;
|
||||
#152 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#153 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#154 = FACE_OUTER_BOUND ( 'NONE', #60, .T. ) ;
|
||||
#155 = AXIS2_PLACEMENT_3D ( 'NONE', #316, #136, #53 ) ;
|
||||
#156 = APPROVAL_DATE_TIME ( #219, #329 ) ;
|
||||
#157 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
|
||||
#158 = CLOSED_SHELL ( 'NONE', ( #296, #277, #293, #286, #292, #280, #288, #279, #299, #290 ) ) ;
|
||||
#159 = LINE ( 'NONE', #127, #306 ) ;
|
||||
#160 = CIRCLE ( 'NONE', #18, 1.200000000000005300 ) ;
|
||||
#161 = EDGE_CURVE ( 'NONE', #251, #294, #112, .T. ) ;
|
||||
#162 = EDGE_LOOP ( 'NONE', ( #177, #241, #56, #333 ) ) ;
|
||||
#163 = APPROVAL_PERSON_ORGANIZATION ( #232, #329, #227 ) ;
|
||||
#164 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#165 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #272, #134 ) ;
|
||||
#166 = FACE_OUTER_BOUND ( 'NONE', #244, .T. ) ;
|
||||
#167 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#168 = AXIS2_PLACEMENT_3D ( 'NONE', #98, #263, #125 ) ;
|
||||
#169 = CARTESIAN_POINT ( 'NONE', ( -3.189999999999995100, 3.906623289280050800E-016, 3.399999999999995900 ) ) ;
|
||||
#170 = VERTEX_POINT ( 'NONE', #223 ) ;
|
||||
#171 = DESIGN_CONTEXT ( 'detailed design', #6, 'design' ) ;
|
||||
#172 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#173 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000011700, 0.0000000000000000000, 3.399999999999995900 ) ) ;
|
||||
#174 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#175 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#176 = CIRCLE ( 'NONE', #2, 0.9050000000000030200 ) ;
|
||||
#177 = ORIENTED_EDGE ( 'NONE', *, *, #287, .F. ) ;
|
||||
#178 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#179 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
|
||||
#180 = EDGE_LOOP ( 'NONE', ( #254, #191, #129, #70 ) ) ;
|
||||
#181 = DATE_AND_TIME ( #245, #338 ) ;
|
||||
#182 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #6 ) ;
|
||||
#183 = CIRCLE ( 'NONE', #5, 3.189999999999995100 ) ;
|
||||
#184 = ORIENTED_EDGE ( 'NONE', *, *, #300, .T. ) ;
|
||||
#185 = FACE_OUTER_BOUND ( 'NONE', #180, .T. ) ;
|
||||
#186 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#187 = EDGE_LOOP ( 'NONE', ( #115, #50, #327, #236 ) ) ;
|
||||
#188 = PERSON_AND_ORGANIZATION ( #52, #211 ) ;
|
||||
#189 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#190 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ;
|
||||
#191 = ORIENTED_EDGE ( 'NONE', *, *, #305, .T. ) ;
|
||||
#192 = FACE_BOUND ( 'NONE', #256, .T. ) ;
|
||||
#193 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#194 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 3.399999999999995900 ) ) ;
|
||||
#195 = EDGE_LOOP ( 'NONE', ( #149, #273 ) ) ;
|
||||
#196 = LOCAL_TIME ( 15, 7, 31.00000000000000000, #3 ) ;
|
||||
#197 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 6.123233995736767300E-016, 4.094999999999997100 ) ) ;
|
||||
#198 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#199 = ORIENTED_EDGE ( 'NONE', *, *, #310, .F. ) ;
|
||||
#200 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 3.399999999999995900 ) ) ;
|
||||
#201 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ;
|
||||
#202 = PERSON_AND_ORGANIZATION ( #52, #211 ) ;
|
||||
#203 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#204 = DATE_TIME_ROLE ( 'classification_date' ) ;
|
||||
#205 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#206 = APPROVAL_ROLE ( '' ) ;
|
||||
#207 = ORIENTED_EDGE ( 'NONE', *, *, #305, .F. ) ;
|
||||
#208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#209 = CIRCLE ( 'NONE', #168, 1.200000000000005300 ) ;
|
||||
#210 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#211 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ;
|
||||
#212 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#213 = ORIENTED_EDGE ( 'NONE', *, *, #315, .F. ) ;
|
||||
#214 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#215 = CIRCLE ( 'NONE', #276, 3.189999999999995100 ) ;
|
||||
#216 = CIRCLE ( 'NONE', #76, 3.189999999999995100 ) ;
|
||||
#217 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000005300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#218 = ORIENTED_EDGE ( 'NONE', *, *, #317, .F. ) ;
|
||||
#219 = DATE_AND_TIME ( #295, #35 ) ;
|
||||
#220 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 6.123233995736767300E-016, 0.0000000000000000000 ) ) ;
|
||||
#221 = FACE_OUTER_BOUND ( 'NONE', #230, .T. ) ;
|
||||
#222 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #193, #164 ) ;
|
||||
#223 = CARTESIAN_POINT ( 'NONE', ( -3.189999999999995100, 5.014928642508409500E-016, 4.094999999999997100 ) ) ;
|
||||
#224 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#225 = CYLINDRICAL_SURFACE ( 'NONE', #275, 1.200000000000005300 ) ;
|
||||
#226 = CIRCLE ( 'NONE', #104, 5.000000000000000900 ) ;
|
||||
#227 = APPROVAL_ROLE ( '' ) ;
|
||||
#228 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #32 ) ;
|
||||
#229 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#230 = EDGE_LOOP ( 'NONE', ( #259, #8, #82, #139 ) ) ;
|
||||
#231 = ORIENTED_EDGE ( 'NONE', *, *, #302, .T. ) ;
|
||||
#232 = PERSON_AND_ORGANIZATION ( #52, #211 ) ;
|
||||
#233 = DATE_TIME_ROLE ( 'creation_date' ) ;
|
||||
#234 = CIRCLE ( 'NONE', #284, 1.200000000000011700 ) ;
|
||||
#235 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#236 = ORIENTED_EDGE ( 'NONE', *, *, #310, .T. ) ;
|
||||
#237 = PERSON_AND_ORGANIZATION ( #52, #211 ) ;
|
||||
#238 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#239 = AXIS2_PLACEMENT_3D ( 'NONE', #118, #46, #186 ) ;
|
||||
#240 = VECTOR ( 'NONE', #253, 1000.000000000000000 ) ;
|
||||
#241 = ORIENTED_EDGE ( 'NONE', *, *, #285, .T. ) ;
|
||||
#242 = EDGE_LOOP ( 'NONE', ( #43, #108 ) ) ;
|
||||
#243 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 0.0000000000000000000, 4.094999999999997100 ) ) ;
|
||||
#244 = EDGE_LOOP ( 'NONE', ( #77, #350, #199, #135 ) ) ;
|
||||
#245 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#246 = PLANE ( 'NONE', #155 ) ;
|
||||
#247 = ORIENTED_EDGE ( 'NONE', *, *, #61, .T. ) ;
|
||||
#248 = CIRCLE ( 'NONE', #47, 5.000000000000000900 ) ;
|
||||
#249 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#250 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#251 = VERTEX_POINT ( 'NONE', #220 ) ;
|
||||
#252 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#253 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#254 = ORIENTED_EDGE ( 'NONE', *, *, #304, .T. ) ;
|
||||
#255 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ;
|
||||
#256 = EDGE_LOOP ( 'NONE', ( #34, #313 ) ) ;
|
||||
#257 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#258 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ;
|
||||
#259 = ORIENTED_EDGE ( 'NONE', *, *, #309, .F. ) ;
|
||||
#260 = FACE_OUTER_BOUND ( 'NONE', #162, .T. ) ;
|
||||
#261 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 3.399999999999995900 ) ) ;
|
||||
#262 = VERTEX_POINT ( 'NONE', #169 ) ;
|
||||
#263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#264 = ORIENTED_EDGE ( 'NONE', *, *, #312, .T. ) ;
|
||||
#265 = CARTESIAN_POINT ( 'NONE', ( 3.189999999999995100, 0.0000000000000000000, 4.094999999999997100 ) ) ;
|
||||
#266 = TOROIDAL_SURFACE ( 'NONE', #239, 4.094999999999998000, 0.9050000000000030200 ) ;
|
||||
#267 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #142, #342 ) ;
|
||||
#268 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#269 = VECTOR ( 'NONE', #229, 1000.000000000000000 ) ;
|
||||
#270 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #45, #214 ) ;
|
||||
#271 = AXIS2_PLACEMENT_3D ( 'NONE', #57, #80, #92 ) ;
|
||||
#272 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#273 = ORIENTED_EDGE ( 'NONE', *, *, #297, .T. ) ;
|
||||
#274 = AXIS2_PLACEMENT_3D ( 'NONE', #91, #95, #124 ) ;
|
||||
#275 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #101, #198 ) ;
|
||||
#276 = AXIS2_PLACEMENT_3D ( 'NONE', #261, #119, #303 ) ;
|
||||
#277 = ADVANCED_FACE ( 'NONE', ( #154 ), #225, .F. ) ;
|
||||
#278 = AXIS2_PLACEMENT_3D ( 'NONE', #48, #78, #23 ) ;
|
||||
#279 = ADVANCED_FACE ( 'NONE', ( #103 ), #40, .F. ) ;
|
||||
#280 = ADVANCED_FACE ( 'NONE', ( #323 ), #26, .T. ) ;
|
||||
#281 = TOROIDAL_SURFACE ( 'NONE', #278, 4.094999999999998000, 0.9050000000000030200 ) ;
|
||||
#282 = AXIS2_PLACEMENT_3D ( 'NONE', #147, #146, #145 ) ;
|
||||
#283 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#284 = AXIS2_PLACEMENT_3D ( 'NONE', #194, #175, #174 ) ;
|
||||
#285 = EDGE_CURVE ( 'NONE', #262, #170, #159, .T. ) ;
|
||||
#286 = ADVANCED_FACE ( 'NONE', ( #166 ), #281, .T. ) ;
|
||||
#287 = EDGE_CURVE ( 'NONE', #262, #143, #215, .T. ) ;
|
||||
#288 = ADVANCED_FACE ( 'NONE', ( #90, #151 ), #21, .F. ) ;
|
||||
#289 = EDGE_CURVE ( 'NONE', #170, #334, #351, .T. ) ;
|
||||
#290 = ADVANCED_FACE ( 'NONE', ( #298 ), #36, .F. ) ;
|
||||
#291 = EDGE_CURVE ( 'NONE', #143, #334, #141, .T. ) ;
|
||||
#292 = ADVANCED_FACE ( 'NONE', ( #221 ), #266, .T. ) ;
|
||||
#293 = ADVANCED_FACE ( 'NONE', ( #185 ), #343, .T. ) ;
|
||||
#294 = VERTEX_POINT ( 'NONE', #113 ) ;
|
||||
#295 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#296 = ADVANCED_FACE ( 'NONE', ( #260 ), #97, .F. ) ;
|
||||
#297 = EDGE_CURVE ( 'NONE', #337, #12, #209, .T. ) ;
|
||||
#298 = FACE_OUTER_BOUND ( 'NONE', #187, .T. ) ;
|
||||
#299 = ADVANCED_FACE ( 'NONE', ( #192, #71 ), #246, .F. ) ;
|
||||
#300 = EDGE_CURVE ( 'NONE', #337, #346, #16, .T. ) ;
|
||||
#301 = CARTESIAN_POINT ( 'NONE', ( 3.189999999999995100, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#302 = EDGE_CURVE ( 'NONE', #12, #132, #15, .T. ) ;
|
||||
#303 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#304 = EDGE_CURVE ( 'NONE', #73, #9, #248, .T. ) ;
|
||||
#305 = EDGE_CURVE ( 'NONE', #9, #251, #332, .T. ) ;
|
||||
#306 = VECTOR ( 'NONE', #318, 1000.000000000000000 ) ;
|
||||
#307 = VECTOR ( 'NONE', #268, 1000.000000000000000 ) ;
|
||||
#308 = EDGE_CURVE ( 'NONE', #73, #294, #55, .T. ) ;
|
||||
#309 = EDGE_CURVE ( 'NONE', #73, #170, #176, .T. ) ;
|
||||
#310 = EDGE_CURVE ( 'NONE', #334, #170, #183, .T. ) ;
|
||||
#311 = EDGE_CURVE ( 'NONE', #9, #334, #137, .T. ) ;
|
||||
#312 = EDGE_CURVE ( 'NONE', #9, #73, #41, .T. ) ;
|
||||
#313 = ORIENTED_EDGE ( 'NONE', *, *, #61, .F. ) ;
|
||||
#314 = DATE_AND_TIME ( #44, #109 ) ;
|
||||
#315 = EDGE_CURVE ( 'NONE', #294, #251, #226, .T. ) ;
|
||||
#316 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000011700, 0.0000000000000000000, 3.399999999999995900 ) ) ;
|
||||
#317 = EDGE_CURVE ( 'NONE', #12, #337, #160, .T. ) ;
|
||||
#318 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#319 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#320 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #100 ) ) ;
|
||||
#321 = EDGE_CURVE ( 'NONE', #132, #346, #27, .T. ) ;
|
||||
#322 = EDGE_CURVE ( 'NONE', #143, #262, #216, .T. ) ;
|
||||
#323 = FACE_OUTER_BOUND ( 'NONE', #122, .T. ) ;
|
||||
#324 = CC_DESIGN_SECURITY_CLASSIFICATION ( #336, ( #348 ) ) ;
|
||||
#325 = CC_DESIGN_APPROVAL ( #329, ( #336 ) ) ;
|
||||
#326 = APPROVAL_ROLE ( '' ) ;
|
||||
#327 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ;
|
||||
#328 = PERSON_AND_ORGANIZATION ( #52, #211 ) ;
|
||||
#329 = APPROVAL ( #63, 'UNSPECIFIED' ) ;
|
||||
#330 = MECHANICAL_CONTEXT ( 'NONE', #110, 'mechanical' ) ;
|
||||
#331 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #314, #204, ( #336 ) ) ;
|
||||
#332 = LINE ( 'NONE', #84, #120 ) ;
|
||||
#333 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ;
|
||||
#334 = VERTEX_POINT ( 'NONE', #265 ) ;
|
||||
#335 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #237, #30, ( #336 ) ) ;
|
||||
#336 = SECURITY_CLASSIFICATION ( '', '', #179 ) ;
|
||||
#337 = VERTEX_POINT ( 'NONE', #99 ) ;
|
||||
#338 = LOCAL_TIME ( 15, 7, 31.00000000000000000, #65 ) ;
|
||||
#339 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #328, #4, ( #348 ) ) ;
|
||||
#340 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #51, #152, ( #348 ) ) ;
|
||||
#341 = ORIENTED_EDGE ( 'NONE', *, *, #302, .F. ) ;
|
||||
#342 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#343 = CYLINDRICAL_SURFACE ( 'NONE', #102, 5.000000000000000900 ) ;
|
||||
#344 = CC_DESIGN_APPROVAL ( #345, ( #348 ) ) ;
|
||||
#345 = APPROVAL ( #349, 'UNSPECIFIED' ) ;
|
||||
#346 = VERTEX_POINT ( 'NONE', #22 ) ;
|
||||
#347 = PERSON_AND_ORGANIZATION ( #52, #211 ) ;
|
||||
#348 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #100, .NOT_KNOWN. ) ;
|
||||
#349 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#350 = ORIENTED_EDGE ( 'NONE', *, *, #309, .T. ) ;
|
||||
#351 = CIRCLE ( 'NONE', #270, 3.189999999999995100 ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,664 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP203' ),
|
||||
'1' );
|
||||
FILE_NAME ('Lock.STEP',
|
||||
'2013-11-14T05:09:33',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, 2.500000000000000000 ) ) ;
|
||||
#2 = CARTESIAN_POINT ( 'NONE', ( -2.299999999999992300, 6.250000000000000000, -1.999999999999999600 ) ) ;
|
||||
#3 = ORIENTED_EDGE ( 'NONE', *, *, #177, .T. ) ;
|
||||
#4 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#5 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#6 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
|
||||
#7 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, -2.500000000000000000 ) ) ;
|
||||
#8 = DATE_TIME_ROLE ( 'classification_date' ) ;
|
||||
#9 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 2.500000000000000000 ) ) ;
|
||||
#10 = ORIENTED_EDGE ( 'NONE', *, *, #456, .T. ) ;
|
||||
#11 = APPROVAL ( #298, 'UNSPECIFIED' ) ;
|
||||
#12 = VERTEX_POINT ( 'NONE', #52 ) ;
|
||||
#13 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #284, #6, ( #285 ) ) ;
|
||||
#14 = DIRECTION ( 'NONE', ( -0.8574929257125449800, 0.0000000000000000000, -0.5144957554275252400 ) ) ;
|
||||
#15 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.000000000000000000 ) ) ;
|
||||
#16 = AXIS2_PLACEMENT_3D ( 'NONE', #257, #36, #304 ) ;
|
||||
#17 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, (
|
||||
( #352, #447 ),
|
||||
( #281, #62 ),
|
||||
( #340, #95 ),
|
||||
( #388, #128 ) ),
|
||||
.UNSPECIFIED., .F., .F., .F. )
|
||||
B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 2, 2 ),
|
||||
( 0.0000000000000000000, 1.000000000000000000 ),
|
||||
( 0.0000000000000000000, 1.000000000000000000 ),
|
||||
.UNSPECIFIED. )
|
||||
GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( (
|
||||
( 1.000000000000000000, 1.000000000000000000),
|
||||
( 0.8047378541243649400, 0.8047378541243649400),
|
||||
( 0.8047378541243649400, 0.8047378541243649400),
|
||||
( 1.000000000000000000, 1.000000000000000000) ) )
|
||||
REPRESENTATION_ITEM ( '' ) SURFACE ( ) );
|
||||
#18 = VERTEX_POINT ( 'NONE', #332 ) ;
|
||||
#19 = VERTEX_POINT ( 'NONE', #324 ) ;
|
||||
#20 = CARTESIAN_POINT ( 'NONE', ( 3.332650799042643300, 5.498671657747176600, -2.000000000000000400 ) ) ;
|
||||
#21 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 2.000000000000000000 ) ) ;
|
||||
#22 = EDGE_CURVE ( 'NONE', #85, #390, #481, .T. ) ;
|
||||
#23 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#24 = ORIENTED_EDGE ( 'NONE', *, *, #177, .F. ) ;
|
||||
#25 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999997800, 3.593145750507619400, 1.999999999999999600 ) ) ;
|
||||
#26 = ORIENTED_EDGE ( 'NONE', *, *, #233, .T. ) ;
|
||||
#27 = CC_DESIGN_APPROVAL ( #11, ( #51 ) ) ;
|
||||
#28 = CARTESIAN_POINT ( 'NONE', ( 0.2599457969576740000, 5.999999999999998200, -1.999999999999999600 ) ) ;
|
||||
#29 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258579600, 3.749999999999917400, -2.501000000000000300 ) ) ;
|
||||
#30 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #246 ) ;
|
||||
#31 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#32 = APPROVAL_ROLE ( '' ) ;
|
||||
#33 = PLANE ( 'NONE', #351 ) ;
|
||||
#34 = VERTEX_POINT ( 'NONE', #144 ) ;
|
||||
#35 = ORIENTED_EDGE ( 'NONE', *, *, #505, .F. ) ;
|
||||
#36 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#37 = AXIS2_PLACEMENT_3D ( 'NONE', #425, #488, #192 ) ;
|
||||
#38 = CARTESIAN_POINT ( 'NONE', ( 2.453554596516420700, 6.000000000000002700, 2.000000000000000400 ) ) ;
|
||||
#39 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.000000000000000000 ) ) ;
|
||||
#40 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.000000000000000000 ) ) ;
|
||||
#41 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, 1.999999999999999600 ) ) ;
|
||||
#42 = AXIS2_PLACEMENT_3D ( 'NONE', #302, #66, #349 ) ;
|
||||
#43 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, -2.000000000000000000 ) ) ;
|
||||
#44 = VERTEX_POINT ( 'NONE', #373 ) ;
|
||||
#45 = ORIENTED_EDGE ( 'NONE', *, *, #108, .F. ) ;
|
||||
#46 = ORIENTED_EDGE ( 'NONE', *, *, #258, .T. ) ;
|
||||
#47 = CARTESIAN_POINT ( 'NONE', ( -0.8233520233941782300, 5.180977768534856600, -1.999999999999999600 ) ) ;
|
||||
#48 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #231, #161, ( #189 ) ) ;
|
||||
#49 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#50 = ORIENTED_EDGE ( 'NONE', *, *, #342, .F. ) ;
|
||||
#51 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #189, #508 ) ;
|
||||
#52 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, -2.500000000000000000 ) ) ;
|
||||
#53 = PLANE ( 'NONE', #80 ) ;
|
||||
#54 = ORIENTED_EDGE ( 'NONE', *, *, #143, .F. ) ;
|
||||
#55 = EDGE_LOOP ( 'NONE', ( #142, #46, #26, #179, #204, #110, #104, #275 ) ) ;
|
||||
#56 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258579600, 3.750000000000000400, 2.000000000000000000 ) ) ;
|
||||
#57 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#58 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.000000000000000000 ) ) ;
|
||||
#59 = EDGE_LOOP ( 'NONE', ( #288, #163, #24, #509 ) ) ;
|
||||
#60 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#61 = APPROVAL_ROLE ( '' ) ;
|
||||
#62 = CARTESIAN_POINT ( 'NONE', ( 0.03553390593273781500, 5.249999999999999100, 2.000000000000000000 ) ) ;
|
||||
#63 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#64 = EDGE_LOOP ( 'NONE', ( #345, #73, #111, #191 ) ) ;
|
||||
#65 = CC_DESIGN_APPROVAL ( #183, ( #157 ) ) ;
|
||||
#66 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#67 = CC_DESIGN_APPROVAL ( #185, ( #189 ) ) ;
|
||||
#68 = VERTEX_POINT ( 'NONE', #234 ) ;
|
||||
#69 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, 2.000000000000000000 ) ) ;
|
||||
#70 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#71 = EDGE_CURVE ( 'NONE', #534, #305, #486, .T. ) ;
|
||||
#72 = CARTESIAN_POINT ( 'NONE', ( 0.03553390593273780800, 5.249999999999999100, -2.000000000000000000 ) ) ;
|
||||
#73 = ORIENTED_EDGE ( 'NONE', *, *, #101, .T. ) ;
|
||||
#74 = ORIENTED_EDGE ( 'NONE', *, *, #162, .F. ) ;
|
||||
#75 = PLANE ( 'NONE', #466 ) ;
|
||||
#76 = CARTESIAN_POINT ( 'NONE', ( 0.03553390593273780800, 5.249999999999999100, 1.999999999999999600 ) ) ;
|
||||
#77 = ORIENTED_EDGE ( 'NONE', *, *, #386, .T. ) ;
|
||||
#78 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000000200, 2.000000000000000400 ) ) ;
|
||||
#79 = CARTESIAN_POINT ( 'NONE', ( 2.453554596516420700, 6.000000000000001800, -2.000000000000000000 ) ) ;
|
||||
#80 = AXIS2_PLACEMENT_3D ( 'NONE', #392, #443, #166 ) ;
|
||||
#81 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, 3.593145750507618500, 1.999999999999999600 ) ) ;
|
||||
#82 = DIRECTION ( 'NONE', ( -0.5144957554275252400, 0.0000000000000000000, 0.8574929257125449800 ) ) ;
|
||||
#83 = CARTESIAN_POINT ( 'NONE', ( 0.2599457969576736100, 5.999999999999998200, 1.999999999999999600 ) ) ;
|
||||
#84 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, 1.999999999999999600 ) ) ;
|
||||
#85 = VERTEX_POINT ( 'NONE', #245 ) ;
|
||||
#86 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #232, #438, ( #189 ) ) ;
|
||||
#87 = CARTESIAN_POINT ( 'NONE', ( -2.000000000000000000, 3.750000000000000400, 2.000000000000000000 ) ) ;
|
||||
#88 = CARTESIAN_POINT ( 'NONE', ( 2.964466094067261400, 5.249999999999999100, 1.999999999999999600 ) ) ;
|
||||
#89 = EDGE_CURVE ( 'NONE', #305, #44, #475, .T. ) ;
|
||||
#90 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude2', #414 ) ;
|
||||
#91 = EDGE_LOOP ( 'NONE', ( #147, #240, #383, #299 ) ) ;
|
||||
#92 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000000200, 2.000000000000000400 ) ) ;
|
||||
#93 = DATE_TIME_ROLE ( 'creation_date' ) ;
|
||||
#94 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ;
|
||||
#95 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999994400, 3.593145750507619900, 2.000000000000000000 ) ) ;
|
||||
#96 = CARTESIAN_POINT ( 'NONE', ( -2.299999999999992300, 3.750000000000000400, -1.999999999999999600 ) ) ;
|
||||
#97 = EDGE_CURVE ( 'NONE', #347, #344, #485, .T. ) ;
|
||||
#98 = ORIENTED_EDGE ( 'NONE', *, *, #342, .T. ) ;
|
||||
#99 = ORIENTED_EDGE ( 'NONE', *, *, #424, .T. ) ;
|
||||
#100 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 1.249999999999998900, -2.000000000000000000 ) ) ;
|
||||
#101 = EDGE_CURVE ( 'NONE', #327, #305, #471, .T. ) ;
|
||||
#102 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, (
|
||||
( #39, #169 ),
|
||||
( #450, #105 ),
|
||||
( #399, #528 ),
|
||||
( #467, #362 ) ),
|
||||
.UNSPECIFIED., .F., .F., .F. )
|
||||
B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 2, 2 ),
|
||||
( 0.0000000000000000000, 1.000000000000000000 ),
|
||||
( 0.0000000000000000000, 1.000000000000000000 ),
|
||||
.UNSPECIFIED. )
|
||||
GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( (
|
||||
( 1.000000000000000000, 1.000000000000000000),
|
||||
( 0.9157260586911510900, 0.9157260586911510900),
|
||||
( 0.9157260586911510900, 0.9157260586911510900),
|
||||
( 1.000000000000000000, 1.000000000000000000) ) )
|
||||
REPRESENTATION_ITEM ( '' ) SURFACE ( ) );
|
||||
#103 = EDGE_CURVE ( 'NONE', #535, #410, #465, .T. ) ;
|
||||
#104 = ORIENTED_EDGE ( 'NONE', *, *, #456, .F. ) ;
|
||||
#105 = CARTESIAN_POINT ( 'NONE', ( 0.2599457969576740000, 5.999999999999998200, 1.999999999999999800 ) ) ;
|
||||
#106 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, -2.000000000000000000 ) ) ;
|
||||
#107 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, 1.999999999999999600 ) ) ;
|
||||
#108 = EDGE_CURVE ( 'NONE', #44, #85, #482, .T. ) ;
|
||||
#109 = DIRECTION ( 'NONE', ( -1.734723475976807300E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#110 = ORIENTED_EDGE ( 'NONE', *, *, #370, .F. ) ;
|
||||
#111 = ORIENTED_EDGE ( 'NONE', *, *, #71, .F. ) ;
|
||||
#112 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.501000000000000300 ) ) ;
|
||||
#113 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #230, #201, ( #157 ) ) ;
|
||||
#114 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#115 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #84, #88, #81, #78 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 0.0000000000000000000, 1.570796326794896800 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#116 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000001100, 2.000000000000000000 ) ) ;
|
||||
#117 = EDGE_CURVE ( 'NONE', #34, #347, #455, .T. ) ;
|
||||
#118 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 0.0000000000000000000, -2.500000000000000000 ) ) ;
|
||||
#119 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.501000000000000300 ) ) ;
|
||||
#120 = ORIENTED_EDGE ( 'NONE', *, *, #233, .F. ) ;
|
||||
#121 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 6.250000000000000000, -2.500000000000000000 ) ) ;
|
||||
#122 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#124 = VERTEX_POINT ( 'NONE', #149 ) ;
|
||||
#125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#126 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;
|
||||
#127 = APPROVAL_ROLE ( '' ) ;
|
||||
#128 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, 2.000000000000000000 ) ) ;
|
||||
#129 = EDGE_CURVE ( 'NONE', #186, #344, #115, .T. ) ;
|
||||
#130 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258579600, 3.750000000000000400, -1.999999999999999600 ) ) ;
|
||||
#131 = ORIENTED_EDGE ( 'NONE', *, *, #263, .F. ) ;
|
||||
#132 = ORIENTED_EDGE ( 'NONE', *, *, #258, .F. ) ;
|
||||
#133 = EDGE_CURVE ( 'NONE', #501, #410, #461, .T. ) ;
|
||||
#134 = CARTESIAN_POINT ( 'NONE', ( 3.332650799042643300, 5.498671657747176600, 2.000000000000000400 ) ) ;
|
||||
#135 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #155, 'distance_accuracy_value', 'NONE');
|
||||
#136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#137 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #219, #8, ( #157 ) ) ;
|
||||
#138 = EDGE_CURVE ( 'NONE', #390, #124, #172, .T. ) ;
|
||||
#139 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 1.249999999999998900, 2.000000000000000000 ) ) ;
|
||||
#140 = CARTESIAN_POINT ( 'NONE', ( 2.453554596516420700, 6.000000000000001800, 1.999999999999999600 ) ) ;
|
||||
#141 = ORIENTED_EDGE ( 'NONE', *, *, #225, .T. ) ;
|
||||
#142 = ORIENTED_EDGE ( 'NONE', *, *, #361, .T. ) ;
|
||||
#143 = EDGE_CURVE ( 'NONE', #19, #522, #297, .T. ) ;
|
||||
#144 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 4.574307508062887900, -2.000000000000000000 ) ) ;
|
||||
#145 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 4.574307508062887900, -2.000000000000000000 ) ) ;
|
||||
#146 = EDGE_CURVE ( 'NONE', #327, #12, #449, .T. ) ;
|
||||
#147 = ORIENTED_EDGE ( 'NONE', *, *, #22, .F. ) ;
|
||||
#148 = EDGE_CURVE ( 'NONE', #535, #522, #445, .T. ) ;
|
||||
#149 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 6.250000000000000000, 2.500000000000000000 ) ) ;
|
||||
#150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#151 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#152 = AXIS2_PLACEMENT_3D ( 'NONE', #21, #274, #49 ) ;
|
||||
#153 = CARTESIAN_POINT ( 'NONE', ( -4.699999999999983300, 3.750000000000000400, 2.000000000000000000 ) ) ;
|
||||
#154 = DIRECTION ( 'NONE', ( -1.734723475976807300E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#155 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#156 = ORIENTED_EDGE ( 'NONE', *, *, #505, .T. ) ;
|
||||
#157 = SECURITY_CLASSIFICATION ( '', '', #500 ) ;
|
||||
#158 = MECHANICAL_CONTEXT ( 'NONE', #237, 'mechanical' ) ;
|
||||
#159 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 4.574307508062887900, 2.000000000000000000 ) ) ;
|
||||
#160 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000001100, -2.000000000000000000 ) ) ;
|
||||
#161 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
|
||||
#162 = EDGE_CURVE ( 'NONE', #502, #19, #437, .T. ) ;
|
||||
#163 = ORIENTED_EDGE ( 'NONE', *, *, #148, .T. ) ;
|
||||
#164 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#165 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Lock', ( #90, #519 ), #203 ) ;
|
||||
#166 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#167 = ORIENTED_EDGE ( 'NONE', *, *, #283, .F. ) ;
|
||||
#168 = VERTEX_POINT ( 'NONE', #107 ) ;
|
||||
#169 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, 2.000000000000000000 ) ) ;
|
||||
#170 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #200, #236, #293, #58 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 4.712388980384689700, 6.283185307179586200 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#171 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, 3.593145750507617200, 2.000000000000000000 ) ) ;
|
||||
#172 = LINE ( 'NONE', #1, #446 ) ;
|
||||
#173 = VERTEX_POINT ( 'NONE', #266 ) ;
|
||||
#174 = ORIENTED_EDGE ( 'NONE', *, *, #283, .T. ) ;
|
||||
#175 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, -1.249999999999999800, -2.500000000000000000 ) ) ;
|
||||
#176 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#177 = EDGE_CURVE ( 'NONE', #501, #522, #430, .T. ) ;
|
||||
#178 = ORIENTED_EDGE ( 'NONE', *, *, #22, .T. ) ;
|
||||
#179 = ORIENTED_EDGE ( 'NONE', *, *, #133, .F. ) ;
|
||||
#180 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#181 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, (
|
||||
( #145, #220 ),
|
||||
( #20, #134 ),
|
||||
( #262, #38 ),
|
||||
( #307, #69 ) ),
|
||||
.UNSPECIFIED., .F., .F., .F. )
|
||||
B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 2, 2 ),
|
||||
( 0.0000000000000000000, 1.000000000000000000 ),
|
||||
( 0.0000000000000000000, 1.000000000000000000 ),
|
||||
.UNSPECIFIED. )
|
||||
GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( (
|
||||
( 1.000000000000000000, 1.000000000000000000),
|
||||
( 0.9479432750802676600, 0.9479432750802676600),
|
||||
( 0.9479432750802676600, 0.9479432750802676600),
|
||||
( 1.000000000000000000, 1.000000000000000000) ) )
|
||||
REPRESENTATION_ITEM ( '' ) SURFACE ( ) );
|
||||
#182 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.250000000000000200, -2.500000000000000000 ) ) ;
|
||||
#183 = APPROVAL ( #248, 'UNSPECIFIED' ) ;
|
||||
#184 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#185 = APPROVAL ( #387, 'UNSPECIFIED' ) ;
|
||||
#186 = VERTEX_POINT ( 'NONE', #374 ) ;
|
||||
#187 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#188 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 4.574307508062887900, 2.000000000000000000 ) ) ;
|
||||
#189 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #285, .NOT_KNOWN. ) ;
|
||||
#190 = ORIENTED_EDGE ( 'NONE', *, *, #477, .F. ) ;
|
||||
#191 = ORIENTED_EDGE ( 'NONE', *, *, #225, .F. ) ;
|
||||
#192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#193 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #226, #320, #79, #368 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 5.487582353695051700, 6.283185307179586200 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9479432750802676600, 0.9479432750802676600, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#194 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.000000000000000000 ) ) ;
|
||||
#195 = EDGE_CURVE ( 'NONE', #168, #347, #210, .T. ) ;
|
||||
#196 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#197 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 4.574307508062887900, -2.501000000000000300 ) ) ;
|
||||
#198 = EDGE_CURVE ( 'NONE', #206, #186, #429, .T. ) ;
|
||||
#199 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#200 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000001100, -2.000000000000000000 ) ) ;
|
||||
#201 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
|
||||
#202 = AXIS2_PLACEMENT_3D ( 'NONE', #9, #440, #164 ) ;
|
||||
#203 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #135 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #155, #490, #196 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#204 = ORIENTED_EDGE ( 'NONE', *, *, #317, .T. ) ;
|
||||
#205 = APPROVAL_DATE_TIME ( #207, #183 ) ;
|
||||
#206 = VERTEX_POINT ( 'NONE', #247 ) ;
|
||||
#207 = DATE_AND_TIME ( #209, #211 ) ;
|
||||
#208 = PLANE ( 'NONE', #16 ) ;
|
||||
#209 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#210 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #41, #140, #483, #188 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 0.0000000000000000000, 0.7956029534845348000 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9479432750802676600, 0.9479432750802676600, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#211 = LOCAL_TIME ( 15, 9, 33.00000000000000000, #214 ) ;
|
||||
#212 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 6.250000000000000000, 2.500000000000030200 ) ) ;
|
||||
#213 = CARTESIAN_POINT ( 'NONE', ( 2.964466094067261400, 5.249999999999999100, 2.000000000000000000 ) ) ;
|
||||
#214 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#215 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ;
|
||||
#216 = APPROVAL_PERSON_ORGANIZATION ( #218, #183, #32 ) ;
|
||||
#217 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ;
|
||||
#218 = PERSON_AND_ORGANIZATION ( #126, #289 ) ;
|
||||
#219 = DATE_AND_TIME ( #222, #224 ) ;
|
||||
#220 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 4.574307508062887900, 2.000000000000000000 ) ) ;
|
||||
#221 = PLANE ( 'NONE', #152 ) ;
|
||||
#222 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#223 = ORIENTED_EDGE ( 'NONE', *, *, #424, .F. ) ;
|
||||
#224 = LOCAL_TIME ( 15, 9, 33.00000000000000000, #229 ) ;
|
||||
#225 = EDGE_CURVE ( 'NONE', #12, #534, #441, .T. ) ;
|
||||
#226 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 4.574307508062887900, -2.000000000000000000 ) ) ;
|
||||
#227 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 1.250000000000000200, 2.500000000000000000 ) ) ;
|
||||
#228 = ORIENTED_EDGE ( 'NONE', *, *, #198, .F. ) ;
|
||||
#229 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#230 = PERSON_AND_ORGANIZATION ( #126, #289 ) ;
|
||||
#231 = PERSON_AND_ORGANIZATION ( #126, #289 ) ;
|
||||
#232 = PERSON_AND_ORGANIZATION ( #126, #289 ) ;
|
||||
#233 = EDGE_CURVE ( 'NONE', #313, #410, #420, .T. ) ;
|
||||
#234 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000001100, -2.000000000000000000 ) ) ;
|
||||
#235 = PLANE ( 'NONE', #271 ) ;
|
||||
#236 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, 3.593145750507617200, -2.000000000000000000 ) ) ;
|
||||
#237 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#238 = APPROVAL_DATE_TIME ( #241, #185 ) ;
|
||||
#239 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#240 = ORIENTED_EDGE ( 'NONE', *, *, #277, .T. ) ;
|
||||
#241 = DATE_AND_TIME ( #243, #249 ) ;
|
||||
#242 = EDGE_LOOP ( 'NONE', ( #228, #381, #50, #395 ) ) ;
|
||||
#243 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#244 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 1.250000000000000200, -2.500000000000000000 ) ) ;
|
||||
#245 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -1.249999999999999800, 2.500000000000000000 ) ) ;
|
||||
#246 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#247 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.000000000000000000 ) ) ;
|
||||
#248 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#249 = LOCAL_TIME ( 15, 9, 33.00000000000000000, #251 ) ;
|
||||
#250 = PLANE ( 'NONE', #202 ) ;
|
||||
#251 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#252 = APPROVAL_PERSON_ORGANIZATION ( #253, #185, #127 ) ;
|
||||
#253 = PERSON_AND_ORGANIZATION ( #126, #289 ) ;
|
||||
#254 = EDGE_LOOP ( 'NONE', ( #77, #282, #372, #120 ) ) ;
|
||||
#255 = DATE_AND_TIME ( #256, #259 ) ;
|
||||
#256 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#257 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -2.000000000000000000 ) ) ;
|
||||
#258 = EDGE_CURVE ( 'NONE', #206, #313, #385, .T. ) ;
|
||||
#259 = LOCAL_TIME ( 15, 9, 33.00000000000000000, #260 ) ;
|
||||
#260 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#261 = PERSON_AND_ORGANIZATION ( #126, #289 ) ;
|
||||
#262 = CARTESIAN_POINT ( 'NONE', ( 2.453554596516420700, 6.000000000000002700, -2.000000000000000400 ) ) ;
|
||||
#263 = EDGE_CURVE ( 'NONE', #34, #68, #413, .T. ) ;
|
||||
#264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#265 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, 2.000000000000000000 ) ) ;
|
||||
#266 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.000000000000000000 ) ) ;
|
||||
#267 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #255, #93, ( #51 ) ) ;
|
||||
#268 = APPROVAL_DATE_TIME ( #270, #11 ) ;
|
||||
#269 = CARTESIAN_POINT ( 'NONE', ( -2.000000000000000000, 3.750000000000000400, -1.999999999999999600 ) ) ;
|
||||
#270 = DATE_AND_TIME ( #272, #273 ) ;
|
||||
#271 = AXIS2_PLACEMENT_3D ( 'NONE', #287, #57, #333 ) ;
|
||||
#272 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#273 = LOCAL_TIME ( 15, 9, 33.00000000000000000, #276 ) ;
|
||||
#274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#275 = ORIENTED_EDGE ( 'NONE', *, *, #263, .T. ) ;
|
||||
#276 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#277 = EDGE_CURVE ( 'NONE', #85, #327, #406, .T. ) ;
|
||||
#278 = APPROVAL_PERSON_ORGANIZATION ( #279, #11, #61 ) ;
|
||||
#279 = PERSON_AND_ORGANIZATION ( #126, #289 ) ;
|
||||
#280 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#281 = CARTESIAN_POINT ( 'NONE', ( 0.03553390593273781500, 5.249999999999999100, -2.000000000000000000 ) ) ;
|
||||
#282 = ORIENTED_EDGE ( 'NONE', *, *, #448, .T. ) ;
|
||||
#283 = EDGE_CURVE ( 'NONE', #534, #124, #408, .T. ) ;
|
||||
#284 = PERSON_AND_ORGANIZATION ( #126, #289 ) ;
|
||||
#285 = PRODUCT ( 'Lock', 'Lock', '', ( #158 ) ) ;
|
||||
#286 = CARTESIAN_POINT ( 'NONE', ( -0.8233520233941794600, 5.180977768534854800, 1.999999999999999600 ) ) ;
|
||||
#287 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.249999999999999800, 0.0000000000000000000 ) ) ;
|
||||
#288 = ORIENTED_EDGE ( 'NONE', *, *, #103, .F. ) ;
|
||||
#289 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ;
|
||||
#290 = SHAPE_DEFINITION_REPRESENTATION ( #306, #165 ) ;
|
||||
#291 = ORIENTED_EDGE ( 'NONE', *, *, #277, .F. ) ;
|
||||
#292 = DIRECTION ( 'NONE', ( 0.5144957554275252400, 0.0000000000000000000, -0.8574929257125449800 ) ) ;
|
||||
#293 = CARTESIAN_POINT ( 'NONE', ( 2.964466094067261400, 5.249999999999999100, -2.000000000000000000 ) ) ;
|
||||
#294 = AXIS2_PLACEMENT_3D ( 'NONE', #212, #14, #264 ) ;
|
||||
#295 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 6.250000000000000000, 2.000000000000000000 ) ) ;
|
||||
#296 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 1.250000000000000200, -2.501000000000000300 ) ) ;
|
||||
#297 = LINE ( 'NONE', #87, #444 ) ;
|
||||
#298 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#299 = ORIENTED_EDGE ( 'NONE', *, *, #338, .T. ) ;
|
||||
#300 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -1.249999999999999800, -2.500000000000000000 ) ) ;
|
||||
#301 = CARTESIAN_POINT ( 'NONE', ( -2.000000000000000000, 3.750000000000000400, 2.501000000000000300 ) ) ;
|
||||
#302 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 0.0000000000000000000, -2.501000000000000300 ) ) ;
|
||||
#303 = ORIENTED_EDGE ( 'NONE', *, *, #129, .T. ) ;
|
||||
#304 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#305 = VERTEX_POINT ( 'NONE', #175 ) ;
|
||||
#306 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #51 ) ;
|
||||
#307 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.000000000000000000 ) ) ;
|
||||
#308 = FACE_OUTER_BOUND ( 'NONE', #530, .T. ) ;
|
||||
#309 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 6.250000000000000000, -2.000000000000000000 ) ) ;
|
||||
#310 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#311 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #489, #25, #76, #418 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 4.712388980384689700, 6.283185307179586200 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#312 = FACE_OUTER_BOUND ( 'NONE', #493, .T. ) ;
|
||||
#313 = VERTEX_POINT ( 'NONE', #43 ) ;
|
||||
#314 = FACE_OUTER_BOUND ( 'NONE', #91, .T. ) ;
|
||||
#315 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258579600, 3.750000000000000400, -1.999999999999999600 ) ) ;
|
||||
#316 = FACE_OUTER_BOUND ( 'NONE', #59, .T. ) ;
|
||||
#317 = EDGE_CURVE ( 'NONE', #501, #502, #394, .T. ) ;
|
||||
#318 = FACE_OUTER_BOUND ( 'NONE', #532, .T. ) ;
|
||||
#319 = FACE_OUTER_BOUND ( 'NONE', #457, .T. ) ;
|
||||
#320 = CARTESIAN_POINT ( 'NONE', ( 3.332650799042643700, 5.498671657747176600, -2.000000000000000000 ) ) ;
|
||||
#321 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, -1.249999999999999800, 2.500000000000000000 ) ) ;
|
||||
#322 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #261, #339, ( #51 ) ) ;
|
||||
#323 = FACE_OUTER_BOUND ( 'NONE', #254, .T. ) ;
|
||||
#324 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258579600, 3.750000000000000400, 2.000000000000000000 ) ) ;
|
||||
#325 = ORIENTED_EDGE ( 'NONE', *, *, #317, .F. ) ;
|
||||
#326 = LINE ( 'NONE', #112, #346 ) ;
|
||||
#327 = VERTEX_POINT ( 'NONE', #458 ) ;
|
||||
#328 = AXIS2_PLACEMENT_3D ( 'NONE', #529, #533, #70 ) ;
|
||||
#329 = FACE_OUTER_BOUND ( 'NONE', #242, .T. ) ;
|
||||
#330 = CARTESIAN_POINT ( 'NONE', ( -2.299999999999992300, 1.250000000000000200, -1.999999999999999600 ) ) ;
|
||||
#331 = FACE_OUTER_BOUND ( 'NONE', #523, .T. ) ;
|
||||
#332 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, 2.000000000000000000 ) ) ;
|
||||
#333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#334 = FACE_OUTER_BOUND ( 'NONE', #364, .T. ) ;
|
||||
#335 = FACE_OUTER_BOUND ( 'NONE', #371, .T. ) ;
|
||||
#336 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #285 ) ) ;
|
||||
#337 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, -2.500000000000000000 ) ) ;
|
||||
#338 = EDGE_CURVE ( 'NONE', #12, #390, #396, .T. ) ;
|
||||
#339 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#340 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999994400, 3.593145750507619900, -2.000000000000000000 ) ) ;
|
||||
#341 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 6.250000000000000000, -2.501000000000000300 ) ) ;
|
||||
#342 = EDGE_CURVE ( 'NONE', #344, #68, #404, .T. ) ;
|
||||
#343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#344 = VERTEX_POINT ( 'NONE', #92 ) ;
|
||||
#345 = ORIENTED_EDGE ( 'NONE', *, *, #146, .F. ) ;
|
||||
#346 = VECTOR ( 'NONE', #180, 1000.000000000000000 ) ;
|
||||
#347 = VERTEX_POINT ( 'NONE', #159 ) ;
|
||||
#348 = LINE ( 'NONE', #393, #350 ) ;
|
||||
#349 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#350 = VECTOR ( 'NONE', #136, 1000.000000000000000 ) ;
|
||||
#351 = AXIS2_PLACEMENT_3D ( 'NONE', #301, #63, #343 ) ;
|
||||
#352 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.000000000000000000 ) ) ;
|
||||
#353 = FACE_OUTER_BOUND ( 'NONE', #426, .T. ) ;
|
||||
#354 = FACE_OUTER_BOUND ( 'NONE', #55, .T. ) ;
|
||||
#355 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999993300, 3.593145750507620300, -2.000000000000000000 ) ) ;
|
||||
#356 = ORIENTED_EDGE ( 'NONE', *, *, #138, .T. ) ;
|
||||
#357 = FACE_BOUND ( 'NONE', #531, .T. ) ;
|
||||
#358 = ORIENTED_EDGE ( 'NONE', *, *, #138, .F. ) ;
|
||||
#359 = FACE_OUTER_BOUND ( 'NONE', #398, .T. ) ;
|
||||
#360 = VECTOR ( 'NONE', #367, 1000.000000000000000 ) ;
|
||||
#361 = EDGE_CURVE ( 'NONE', #68, #206, #170, .T. ) ;
|
||||
#362 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258552700, 3.749999999999977800, 2.000000000000000000 ) ) ;
|
||||
#363 = PLANE ( 'NONE', #37 ) ;
|
||||
#364 = EDGE_LOOP ( 'NONE', ( #35, #462, #526, #94 ) ) ;
|
||||
#365 = FACE_OUTER_BOUND ( 'NONE', #64, .T. ) ;
|
||||
#366 = LINE ( 'NONE', #116, #360 ) ;
|
||||
#367 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#368 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.000000000000000000 ) ) ;
|
||||
#369 = VECTOR ( 'NONE', #122, 1000.000000000000000 ) ;
|
||||
#370 = EDGE_CURVE ( 'NONE', #173, #502, #515, .T. ) ;
|
||||
#371 = EDGE_LOOP ( 'NONE', ( #132, #460, #223, #484 ) ) ;
|
||||
#372 = ORIENTED_EDGE ( 'NONE', *, *, #103, .T. ) ;
|
||||
#373 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, -1.249999999999999800, 2.500000000000000000 ) ) ;
|
||||
#374 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, 1.999999999999999600 ) ) ;
|
||||
#375 = LINE ( 'NONE', #411, #369 ) ;
|
||||
#376 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, 1.999999999999999600 ) ) ;
|
||||
#377 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#378 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #237 ) ;
|
||||
#379 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, -1.249999999999999800, -2.500000000000000000 ) ) ;
|
||||
#380 = VECTOR ( 'NONE', #154, 1000.000000000000000 ) ;
|
||||
#381 = ORIENTED_EDGE ( 'NONE', *, *, #361, .F. ) ;
|
||||
#382 = VECTOR ( 'NONE', #125, 1000.000000000000000 ) ;
|
||||
#383 = ORIENTED_EDGE ( 'NONE', *, *, #146, .T. ) ;
|
||||
#384 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#385 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #40, #72, #355, #106 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 0.0000000000000000000, 1.570796326794896600 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#386 = EDGE_CURVE ( 'NONE', #313, #18, #375, .T. ) ;
|
||||
#387 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#388 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, -2.000000000000000000 ) ) ;
|
||||
#389 = ORIENTED_EDGE ( 'NONE', *, *, #97, .T. ) ;
|
||||
#390 = VERTEX_POINT ( 'NONE', #468 ) ;
|
||||
#391 = VECTOR ( 'NONE', #60, 1000.000000000000000 ) ;
|
||||
#392 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -2.500000000000000000 ) ) ;
|
||||
#393 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 0.0000000000000000000, 2.500000000000000000 ) ) ;
|
||||
#394 = LINE ( 'NONE', #269, #391 ) ;
|
||||
#395 = ORIENTED_EDGE ( 'NONE', *, *, #129, .F. ) ;
|
||||
#396 = LINE ( 'NONE', #337, #382 ) ;
|
||||
#397 = VECTOR ( 'NONE', #176, 1000.000000000000000 ) ;
|
||||
#398 = EDGE_LOOP ( 'NONE', ( #492, #525, #419, #167 ) ) ;
|
||||
#399 = CARTESIAN_POINT ( 'NONE', ( -0.8233520233941782300, 5.180977768534855700, -1.999999999999999800 ) ) ;
|
||||
#400 = CC_DESIGN_SECURITY_CLASSIFICATION ( #157, ( #189 ) ) ;
|
||||
#401 = VECTOR ( 'NONE', #499, 1000.000000000000000 ) ;
|
||||
#402 = VECTOR ( 'NONE', #405, 1000.000000000000000 ) ;
|
||||
#403 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 3.750000000000000400, 2.500000000000030200 ) ) ;
|
||||
#404 = LINE ( 'NONE', #296, #401 ) ;
|
||||
#405 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#406 = LINE ( 'NONE', #300, #402 ) ;
|
||||
#407 = EDGE_CURVE ( 'NONE', #19, #168, #463, .T. ) ;
|
||||
#408 = LINE ( 'NONE', #341, #397 ) ;
|
||||
#409 = ORIENTED_EDGE ( 'NONE', *, *, #338, .F. ) ;
|
||||
#410 = VERTEX_POINT ( 'NONE', #330 ) ;
|
||||
#411 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000000200, -2.501000000000000300 ) ) ;
|
||||
#412 = VECTOR ( 'NONE', #423, 1000.000000000000000 ) ;
|
||||
#413 = LINE ( 'NONE', #309, #435 ) ;
|
||||
#414 = CLOSED_SHELL ( 'NONE', ( #506, #478, #518, #480, #498, #513, #507, #487, #520, #521, #472, #469, #474, #514, #524 ) ) ;
|
||||
#415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#416 = VECTOR ( 'NONE', #31, 1000.000000000000000 ) ;
|
||||
#417 = ORIENTED_EDGE ( 'NONE', *, *, #108, .T. ) ;
|
||||
#418 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, 1.999999999999999600 ) ) ;
|
||||
#419 = ORIENTED_EDGE ( 'NONE', *, *, #477, .T. ) ;
|
||||
#420 = LINE ( 'NONE', #160, #412 ) ;
|
||||
#421 = VECTOR ( 'NONE', #151, 1000.000000000000000 ) ;
|
||||
#422 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, -1.249999999999999800, -2.500000000000000000 ) ) ;
|
||||
#423 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#424 = EDGE_CURVE ( 'NONE', #18, #186, #311, .T. ) ;
|
||||
#425 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, -2.500000000000000000 ) ) ;
|
||||
#426 = EDGE_LOOP ( 'NONE', ( #190, #417, #178, #356 ) ) ;
|
||||
#427 = VECTOR ( 'NONE', #82, 1000.000000000000000 ) ;
|
||||
#428 = ORIENTED_EDGE ( 'NONE', *, *, #97, .F. ) ;
|
||||
#429 = LINE ( 'NONE', #119, #421 ) ;
|
||||
#430 = LINE ( 'NONE', #403, #427 ) ;
|
||||
#431 = CARTESIAN_POINT ( 'NONE', ( -4.699999999999983300, 1.250000000000001100, 2.000000000000000000 ) ) ;
|
||||
#432 = CARTESIAN_POINT ( 'NONE', ( -2.794117647058814500, 1.250000000000000200, -1.176470588235292600 ) ) ;
|
||||
#433 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#434 = VECTOR ( 'NONE', #310, 1000.000000000000000 ) ;
|
||||
#435 = VECTOR ( 'NONE', #109, 1000.000000000000000 ) ;
|
||||
#436 = VECTOR ( 'NONE', #433, 1000.000000000000000 ) ;
|
||||
#437 = LINE ( 'NONE', #29, #434 ) ;
|
||||
#438 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#439 = VECTOR ( 'NONE', #5, 1000.000000000000000 ) ;
|
||||
#440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#441 = LINE ( 'NONE', #7, #416 ) ;
|
||||
#442 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ;
|
||||
#443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#444 = VECTOR ( 'NONE', #4, 1000.000000000000000 ) ;
|
||||
#445 = LINE ( 'NONE', #494, #436 ) ;
|
||||
#446 = VECTOR ( 'NONE', #384, 1000.000000000000000 ) ;
|
||||
#447 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, 2.000000000000000000 ) ) ;
|
||||
#448 = EDGE_CURVE ( 'NONE', #18, #535, #366, .T. ) ;
|
||||
#449 = LINE ( 'NONE', #244, #439 ) ;
|
||||
#450 = CARTESIAN_POINT ( 'NONE', ( 0.2599457969576740000, 5.999999999999998200, -1.999999999999999800 ) ) ;
|
||||
#451 = VECTOR ( 'NONE', #280, 1000.000000000000000 ) ;
|
||||
#452 = VECTOR ( 'NONE', #150, 1000.000000000000000 ) ;
|
||||
#453 = VECTOR ( 'NONE', #239, 1000.000000000000000 ) ;
|
||||
#454 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, 3.593145750507617200, -2.000000000000000000 ) ) ;
|
||||
#455 = LINE ( 'NONE', #197, #451 ) ;
|
||||
#456 = EDGE_CURVE ( 'NONE', #34, #173, #193, .T. ) ;
|
||||
#457 = EDGE_LOOP ( 'NONE', ( #10, #156, #217, #442 ) ) ;
|
||||
#458 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -1.249999999999999800, -2.500000000000000000 ) ) ;
|
||||
#459 = VECTOR ( 'NONE', #292, 1000.000000000000000 ) ;
|
||||
#460 = ORIENTED_EDGE ( 'NONE', *, *, #198, .T. ) ;
|
||||
#461 = LINE ( 'NONE', #2, #452 ) ;
|
||||
#462 = ORIENTED_EDGE ( 'NONE', *, *, #370, .T. ) ;
|
||||
#463 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #56, #286, #83, #376 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 5.266650814837012400, 6.283185307179586200 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9157260586911510900, 0.9157260586911510900, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#464 = VECTOR ( 'NONE', #377, 1000.000000000000000 ) ;
|
||||
#465 = LINE ( 'NONE', #432, #459 ) ;
|
||||
#466 = AXIS2_PLACEMENT_3D ( 'NONE', #182, #114, #415 ) ;
|
||||
#467 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258552700, 3.749999999999977800, -2.000000000000000000 ) ) ;
|
||||
#468 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, 2.500000000000000000 ) ) ;
|
||||
#469 = ADVANCED_FACE ( 'NONE', ( #359, #357 ), #479, .F. ) ;
|
||||
#470 = PLANE ( 'NONE', #328 ) ;
|
||||
#471 = LINE ( 'NONE', #422, #464 ) ;
|
||||
#472 = ADVANCED_FACE ( 'NONE', ( #365 ), #53, .F. ) ;
|
||||
#473 = VECTOR ( 'NONE', #123, 1000.000000000000000 ) ;
|
||||
#474 = ADVANCED_FACE ( 'NONE', ( #354 ), #208, .T. ) ;
|
||||
#475 = LINE ( 'NONE', #379, #473 ) ;
|
||||
#476 = VECTOR ( 'NONE', #187, 1000.000000000000000 ) ;
|
||||
#477 = EDGE_CURVE ( 'NONE', #44, #124, #348, .T. ) ;
|
||||
#478 = ADVANCED_FACE ( 'NONE', ( #335 ), #17, .F. ) ;
|
||||
#479 = PLANE ( 'NONE', #42 ) ;
|
||||
#480 = ADVANCED_FACE ( 'NONE', ( #331 ), #33, .F. ) ;
|
||||
#481 = LINE ( 'NONE', #227, #476 ) ;
|
||||
#482 = LINE ( 'NONE', #321, #453 ) ;
|
||||
#483 = CARTESIAN_POINT ( 'NONE', ( 3.332650799042643700, 5.498671657747176600, 1.999999999999999600 ) ) ;
|
||||
#484 = ORIENTED_EDGE ( 'NONE', *, *, #386, .F. ) ;
|
||||
#485 = LINE ( 'NONE', #295, #380 ) ;
|
||||
#486 = LINE ( 'NONE', #118, #491 ) ;
|
||||
#487 = ADVANCED_FACE ( 'NONE', ( #353 ), #250, .T. ) ;
|
||||
#488 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#489 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, 2.000000000000000000 ) ) ;
|
||||
#490 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#491 = VECTOR ( 'NONE', #23, 1000.000000000000000 ) ;
|
||||
#492 = ORIENTED_EDGE ( 'NONE', *, *, #71, .T. ) ;
|
||||
#493 = EDGE_LOOP ( 'NONE', ( #99, #303, #428, #215, #495, #496, #503, #504 ) ) ;
|
||||
#494 = CARTESIAN_POINT ( 'NONE', ( -4.699999999999983300, 6.250000000000000000, 2.000000000000000000 ) ) ;
|
||||
#495 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ;
|
||||
#496 = ORIENTED_EDGE ( 'NONE', *, *, #143, .T. ) ;
|
||||
#497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#498 = ADVANCED_FACE ( 'NONE', ( #329 ), #527, .F. ) ;
|
||||
#499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#500 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
|
||||
#501 = VERTEX_POINT ( 'NONE', #96 ) ;
|
||||
#502 = VERTEX_POINT ( 'NONE', #130 ) ;
|
||||
#503 = ORIENTED_EDGE ( 'NONE', *, *, #148, .F. ) ;
|
||||
#504 = ORIENTED_EDGE ( 'NONE', *, *, #448, .F. ) ;
|
||||
#505 = EDGE_CURVE ( 'NONE', #173, #168, #326, .T. ) ;
|
||||
#506 = ADVANCED_FACE ( 'NONE', ( #319 ), #181, .T. ) ;
|
||||
#507 = ADVANCED_FACE ( 'NONE', ( #316 ), #516, .T. ) ;
|
||||
#508 = DESIGN_CONTEXT ( 'detailed design', #246, 'design' ) ;
|
||||
#509 = ORIENTED_EDGE ( 'NONE', *, *, #133, .T. ) ;
|
||||
#510 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ;
|
||||
#511 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ;
|
||||
#512 = ORIENTED_EDGE ( 'NONE', *, *, #101, .F. ) ;
|
||||
#513 = ADVANCED_FACE ( 'NONE', ( #334 ), #102, .T. ) ;
|
||||
#514 = ADVANCED_FACE ( 'NONE', ( #312 ), #221, .T. ) ;
|
||||
#515 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #194, #28, #47, #315 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 0.0000000000000000000, 1.016534492342573600 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9157260586911510900, 0.9157260586911510900, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#516 = PLANE ( 'NONE', #294 ) ;
|
||||
#517 = CARTESIAN_POINT ( 'NONE', ( 2.964466094067261400, 5.249999999999999100, -2.000000000000000000 ) ) ;
|
||||
#518 = ADVANCED_FACE ( 'NONE', ( #323 ), #75, .T. ) ;
|
||||
#519 = AXIS2_PLACEMENT_3D ( 'NONE', #184, #497, #199 ) ;
|
||||
#520 = ADVANCED_FACE ( 'NONE', ( #314 ), #470, .T. ) ;
|
||||
#521 = ADVANCED_FACE ( 'NONE', ( #318 ), #363, .T. ) ;
|
||||
#522 = VERTEX_POINT ( 'NONE', #153 ) ;
|
||||
#523 = EDGE_LOOP ( 'NONE', ( #54, #74, #325, #3 ) ) ;
|
||||
#524 = ADVANCED_FACE ( 'NONE', ( #308 ), #235, .F. ) ;
|
||||
#525 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ;
|
||||
#526 = ORIENTED_EDGE ( 'NONE', *, *, #162, .T. ) ;
|
||||
#527 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, (
|
||||
( #100, #139 ),
|
||||
( #454, #171 ),
|
||||
( #517, #213 ),
|
||||
( #15, #265 ) ),
|
||||
.UNSPECIFIED., .F., .F., .F. )
|
||||
B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 2, 2 ),
|
||||
( 0.0000000000000000000, 1.000000000000000000 ),
|
||||
( 0.0000000000000000000, 1.000000000000000000 ),
|
||||
.UNSPECIFIED. )
|
||||
GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( (
|
||||
( 1.000000000000000000, 1.000000000000000000),
|
||||
( 0.8047378541243649400, 0.8047378541243649400),
|
||||
( 0.8047378541243649400, 0.8047378541243649400),
|
||||
( 1.000000000000000000, 1.000000000000000000) ) )
|
||||
REPRESENTATION_ITEM ( '' ) SURFACE ( ) );
|
||||
#528 = CARTESIAN_POINT ( 'NONE', ( -0.8233520233941782300, 5.180977768534855700, 1.999999999999999800 ) ) ;
|
||||
#529 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 1.250000000000000200, -2.500000000000000000 ) ) ;
|
||||
#530 = EDGE_LOOP ( 'NONE', ( #511, #512, #291, #45 ) ) ;
|
||||
#531 = EDGE_LOOP ( 'NONE', ( #98, #131, #510, #389 ) ) ;
|
||||
#532 = EDGE_LOOP ( 'NONE', ( #174, #358, #409, #141 ) ) ;
|
||||
#533 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#534 = VERTEX_POINT ( 'NONE', #121 ) ;
|
||||
#535 = VERTEX_POINT ( 'NONE', #431 ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
|
|
@ -0,0 +1,708 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP203' ),
|
||||
'1' );
|
||||
FILE_NAME ('Long_Hammer_Slide_Pin.STEP',
|
||||
'2013-11-14T05:09:22',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = ORIENTED_EDGE ( 'NONE', *, *, #546, .F. ) ;
|
||||
#2 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#3 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#4 = AXIS2_PLACEMENT_3D ( 'NONE', #241, #622, #56 ) ;
|
||||
#5 = CIRCLE ( 'NONE', #44, 1.250000000000000200 ) ;
|
||||
#6 = AXIS2_PLACEMENT_3D ( 'NONE', #379, #124, #505 ) ;
|
||||
#7 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#8 = TOROIDAL_SURFACE ( 'NONE', #40, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#9 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#10 = ORIENTED_EDGE ( 'NONE', *, *, #584, .F. ) ;
|
||||
#11 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #300 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #612, #283, #669 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#12 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#13 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#14 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#15 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#16 = DATE_AND_TIME ( #331, #404 ) ;
|
||||
#17 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#18 = EDGE_LOOP ( 'NONE', ( #163, #111 ) ) ;
|
||||
#19 = EDGE_LOOP ( 'NONE', ( #609, #177, #595, #86 ) ) ;
|
||||
#20 = EDGE_CURVE ( 'NONE', #660, #656, #643, .T. ) ;
|
||||
#21 = AXIS2_PLACEMENT_3D ( 'NONE', #416, #410, #406 ) ;
|
||||
#22 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#23 = ORIENTED_EDGE ( 'NONE', *, *, #109, .T. ) ;
|
||||
#24 = EDGE_LOOP ( 'NONE', ( #67, #95, #245, #640 ) ) ;
|
||||
#25 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#26 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #78 ) ;
|
||||
#27 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 3.827021247335477800E-016, 2.499999999999999600 ) ) ;
|
||||
#28 = CIRCLE ( 'NONE', #75, 1.250000000000000200 ) ;
|
||||
#29 = EDGE_CURVE ( 'NONE', #287, #440, #160, .T. ) ;
|
||||
#30 = FACE_OUTER_BOUND ( 'NONE', #18, .T. ) ;
|
||||
#31 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#32 = APPROVAL_ROLE ( '' ) ;
|
||||
#33 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#34 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 4.592425496802574000E-016, 3.750000000000000000 ) ) ;
|
||||
#35 = EDGE_LOOP ( 'NONE', ( #600, #498, #478, #260 ) ) ;
|
||||
#36 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#37 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#38 = CIRCLE ( 'NONE', #183, 5.000000000000000000 ) ;
|
||||
#39 = ORIENTED_EDGE ( 'NONE', *, *, #282, .F. ) ;
|
||||
#40 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #80, #455 ) ;
|
||||
#41 = ORIENTED_EDGE ( 'NONE', *, *, #302, .F. ) ;
|
||||
#42 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#43 = EDGE_CURVE ( 'NONE', #468, #548, #246, .T. ) ;
|
||||
#44 = AXIS2_PLACEMENT_3D ( 'NONE', #205, #558, #236 ) ;
|
||||
#45 = DATE_AND_TIME ( #598, #116 ) ;
|
||||
#46 = CC_DESIGN_APPROVAL ( #363, ( #444 ) ) ;
|
||||
#47 = VERTEX_POINT ( 'NONE', #482 ) ;
|
||||
#48 = EDGE_CURVE ( 'NONE', #47, #259, #377, .T. ) ;
|
||||
#49 = DATE_AND_TIME ( #97, #605 ) ;
|
||||
#50 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#51 = AXIS2_PLACEMENT_3D ( 'NONE', #261, #258, #209 ) ;
|
||||
#52 = ORIENTED_EDGE ( 'NONE', *, *, #616, .F. ) ;
|
||||
#53 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ;
|
||||
#54 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#55 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#56 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#57 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#58 = VECTOR ( 'NONE', #132, 1000.000000000000000 ) ;
|
||||
#59 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#60 = ORIENTED_EDGE ( 'NONE', *, *, #636, .T. ) ;
|
||||
#61 = CIRCLE ( 'NONE', #147, 1.250000000000000200 ) ;
|
||||
#62 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#63 = EDGE_CURVE ( 'NONE', #660, #665, #535, .T. ) ;
|
||||
#64 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#65 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#66 = DATE_AND_TIME ( #531, #194 ) ;
|
||||
#67 = ORIENTED_EDGE ( 'NONE', *, *, #371, .T. ) ;
|
||||
#68 = VECTOR ( 'NONE', #626, 1000.000000000000000 ) ;
|
||||
#69 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#70 = AXIS2_PLACEMENT_3D ( 'NONE', #581, #525, #304 ) ;
|
||||
#71 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -1.734723475976807400E-014, 0.0000000000000000000 ) ) ;
|
||||
#72 = EDGE_CURVE ( 'NONE', #47, #427, #359, .T. ) ;
|
||||
#73 = LINE ( 'NONE', #516, #58 ) ;
|
||||
#74 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#75 = AXIS2_PLACEMENT_3D ( 'NONE', #399, #92, #473 ) ;
|
||||
#76 = CIRCLE ( 'NONE', #112, 1.250000000000000200 ) ;
|
||||
#77 = VERTEX_POINT ( 'NONE', #104 ) ;
|
||||
#78 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#79 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#80 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#81 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
|
||||
#82 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ;
|
||||
#83 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#84 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#85 = AXIS2_PLACEMENT_3D ( 'NONE', #421, #113, #497 ) ;
|
||||
#86 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ;
|
||||
#87 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#88 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#89 = EDGE_CURVE ( 'NONE', #221, #427, #666, .T. ) ;
|
||||
#90 = APPROVAL ( #339, 'UNSPECIFIED' ) ;
|
||||
#91 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#92 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#93 = CIRCLE ( 'NONE', #294, 1.250000000000000200 ) ;
|
||||
#94 = ORIENTED_EDGE ( 'NONE', *, *, #460, .T. ) ;
|
||||
#95 = ORIENTED_EDGE ( 'NONE', *, *, #642, .T. ) ;
|
||||
#96 = EDGE_CURVE ( 'NONE', #569, #656, #685, .T. ) ;
|
||||
#97 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#98 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ;
|
||||
#99 = CIRCLE ( 'NONE', #264, 1.250000000000000200 ) ;
|
||||
#100 = CARTESIAN_POINT ( 'NONE', ( -22.49999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#101 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#102 = EDGE_LOOP ( 'NONE', ( #103, #356, #429, #459 ) ) ;
|
||||
#103 = ORIENTED_EDGE ( 'NONE', *, *, #63, .T. ) ;
|
||||
#104 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#105 = CIRCLE ( 'NONE', #332, 5.000000000000000000 ) ;
|
||||
#106 = CIRCLE ( 'NONE', #361, 3.750000000000000000 ) ;
|
||||
#107 = CIRCLE ( 'NONE', #225, 1.250000000000000200 ) ;
|
||||
#108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#109 = EDGE_CURVE ( 'NONE', #326, #207, #136, .T. ) ;
|
||||
#110 = ORIENTED_EDGE ( 'NONE', *, *, #460, .F. ) ;
|
||||
#111 = ORIENTED_EDGE ( 'NONE', *, *, #335, .T. ) ;
|
||||
#112 = AXIS2_PLACEMENT_3D ( 'NONE', #393, #88, #466 ) ;
|
||||
#113 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#114 = TOROIDAL_SURFACE ( 'NONE', #551, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#115 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#116 = LOCAL_TIME ( 15, 9, 22.00000000000000000, #222 ) ;
|
||||
#117 = VERTEX_POINT ( 'NONE', #14 ) ;
|
||||
#118 = AXIS2_PLACEMENT_3D ( 'NONE', #554, #178, #337 ) ;
|
||||
#119 = ORIENTED_EDGE ( 'NONE', *, *, #383, .F. ) ;
|
||||
#120 = AXIS2_PLACEMENT_3D ( 'NONE', #657, #325, #15 ) ;
|
||||
#121 = CC_DESIGN_APPROVAL ( #90, ( #161 ) ) ;
|
||||
#122 = VECTOR ( 'NONE', #57, 1000.000000000000000 ) ;
|
||||
#123 = CIRCLE ( 'NONE', #120, 5.000000000000000000 ) ;
|
||||
#124 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#125 = ORIENTED_EDGE ( 'NONE', *, *, #256, .T. ) ;
|
||||
#126 = AXIS2_PLACEMENT_3D ( 'NONE', #263, #645, #311 ) ;
|
||||
#127 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#128 = MECHANICAL_CONTEXT ( 'NONE', #78, 'mechanical' ) ;
|
||||
#129 = EDGE_CURVE ( 'NONE', #287, #603, #226, .T. ) ;
|
||||
#130 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
|
||||
#131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#132 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#133 = FACE_OUTER_BOUND ( 'NONE', #230, .T. ) ;
|
||||
#134 = EDGE_LOOP ( 'NONE', ( #314, #661, #203, #41 ) ) ;
|
||||
#135 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#136 = CIRCLE ( 'NONE', #599, 3.750000000000000000 ) ;
|
||||
#137 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#139 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 4.592425496802574000E-016, 3.750000000000000000 ) ) ;
|
||||
#140 = AXIS2_PLACEMENT_3D ( 'NONE', #667, #231, #557 ) ;
|
||||
#141 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#142 = LINE ( 'NONE', #368, #122 ) ;
|
||||
#143 = AXIS2_PLACEMENT_3D ( 'NONE', #679, #291, #17 ) ;
|
||||
#144 = ORIENTED_EDGE ( 'NONE', *, *, #511, .F. ) ;
|
||||
#145 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#146 = EDGE_CURVE ( 'NONE', #77, #586, #276, .T. ) ;
|
||||
#147 = AXIS2_PLACEMENT_3D ( 'NONE', #248, #632, #295 ) ;
|
||||
#148 = VERTEX_POINT ( 'NONE', #9 ) ;
|
||||
#149 = FACE_OUTER_BOUND ( 'NONE', #196, .T. ) ;
|
||||
#150 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#151 = EDGE_LOOP ( 'NONE', ( #629, #490, #646, #502 ) ) ;
|
||||
#152 = CIRCLE ( 'NONE', #501, 3.750000000000000000 ) ;
|
||||
#153 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#154 = AXIS2_PLACEMENT_3D ( 'NONE', #655, #165, #542 ) ;
|
||||
#155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#157 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#158 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#159 = AXIS2_PLACEMENT_3D ( 'NONE', #651, #318, #12 ) ;
|
||||
#160 = CIRCLE ( 'NONE', #21, 1.250000000000000200 ) ;
|
||||
#161 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #296, .NOT_KNOWN. ) ;
|
||||
#162 = ORIENTED_EDGE ( 'NONE', *, *, #422, .T. ) ;
|
||||
#163 = ORIENTED_EDGE ( 'NONE', *, *, #321, .T. ) ;
|
||||
#164 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#165 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#166 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#167 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#168 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 5.357829746269669600E-016, 3.750000000000000000 ) ) ;
|
||||
#169 = ORIENTED_EDGE ( 'NONE', *, *, #442, .T. ) ;
|
||||
#170 = CIRCLE ( 'NONE', #433, 2.500000000000000400 ) ;
|
||||
#171 = EDGE_CURVE ( 'NONE', #388, #148, #289, .T. ) ;
|
||||
#172 = CIRCLE ( 'NONE', #298, 5.000000000000000000 ) ;
|
||||
#173 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#174 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #444 ) ;
|
||||
#175 = ORIENTED_EDGE ( 'NONE', *, *, #499, .F. ) ;
|
||||
#176 = AXIS2_PLACEMENT_3D ( 'NONE', #411, #101, #484 ) ;
|
||||
#177 = ORIENTED_EDGE ( 'NONE', *, *, #532, .T. ) ;
|
||||
#178 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#179 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Long_Hammer_Slide_Pin', ( #683, #494 ), #11 ) ;
|
||||
#180 = AXIS2_PLACEMENT_3D ( 'NONE', #36, #135, #244 ) ;
|
||||
#181 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#182 = EDGE_CURVE ( 'NONE', #548, #468, #152, .T. ) ;
|
||||
#183 = AXIS2_PLACEMENT_3D ( 'NONE', #578, #250, #635 ) ;
|
||||
#184 = CYLINDRICAL_SURFACE ( 'NONE', #662, 5.000000000000000000 ) ;
|
||||
#185 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#186 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#187 = VERTEX_POINT ( 'NONE', #164 ) ;
|
||||
#188 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#189 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#190 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000001100, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#191 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#192 = AXIS2_PLACEMENT_3D ( 'NONE', #139, #524, #199 ) ;
|
||||
#193 = PERSON_AND_ORGANIZATION ( #580, #98 ) ;
|
||||
#194 = LOCAL_TIME ( 15, 9, 22.00000000000000000, #672 ) ;
|
||||
#195 = ORIENTED_EDGE ( 'NONE', *, *, #96, .F. ) ;
|
||||
#196 = EDGE_LOOP ( 'NONE', ( #366, #94, #351, #232 ) ) ;
|
||||
#197 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 3.827021247335478800E-016, 2.500000000000000400 ) ) ;
|
||||
#198 = AXIS2_PLACEMENT_3D ( 'NONE', #362, #320, #317 ) ;
|
||||
#199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ;
|
||||
#200 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #372, #81, ( #161 ) ) ;
|
||||
#201 = FACE_OUTER_BOUND ( 'NONE', #647, .T. ) ;
|
||||
#202 = CYLINDRICAL_SURFACE ( 'NONE', #262, 5.000000000000000000 ) ;
|
||||
#203 = ORIENTED_EDGE ( 'NONE', *, *, #204, .F. ) ;
|
||||
#204 = EDGE_CURVE ( 'NONE', #117, #148, #172, .T. ) ;
|
||||
#205 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 4.592425496802575000E-016, 3.750000000000000900 ) ) ;
|
||||
#206 = DATE_AND_TIME ( #65, #344 ) ;
|
||||
#207 = VERTEX_POINT ( 'NONE', #523 ) ;
|
||||
#208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#209 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#210 = ORIENTED_EDGE ( 'NONE', *, *, #182, .F. ) ;
|
||||
#211 = EDGE_LOOP ( 'NONE', ( #39, #594, #437, #195 ) ) ;
|
||||
#212 = AXIS2_PLACEMENT_3D ( 'NONE', #504, #378, #229 ) ;
|
||||
#213 = AXIS2_PLACEMENT_3D ( 'NONE', #686, #349, #42 ) ;
|
||||
#214 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#215 = ORIENTED_EDGE ( 'NONE', *, *, #321, .F. ) ;
|
||||
#216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#217 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #66, #514, ( #555 ) ) ;
|
||||
#218 = TOROIDAL_SURFACE ( 'NONE', #212, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#219 = ORIENTED_EDGE ( 'NONE', *, *, #309, .T. ) ;
|
||||
#220 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#221 = VERTEX_POINT ( 'NONE', #392 ) ;
|
||||
#222 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#223 = AXIS2_PLACEMENT_3D ( 'NONE', #288, #674, #341 ) ;
|
||||
#224 = VERTEX_POINT ( 'NONE', #197 ) ;
|
||||
#225 = AXIS2_PLACEMENT_3D ( 'NONE', #395, #91, #471 ) ;
|
||||
#226 = CIRCLE ( 'NONE', #233, 3.750000000000000000 ) ;
|
||||
#227 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #628, #130, ( #555 ) ) ;
|
||||
#228 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #193, #385, ( #161 ) ) ;
|
||||
#229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#230 = EDGE_LOOP ( 'NONE', ( #279, #144, #668, #530 ) ) ;
|
||||
#231 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#232 = ORIENTED_EDGE ( 'NONE', *, *, #499, .T. ) ;
|
||||
#233 = AXIS2_PLACEMENT_3D ( 'NONE', #364, #54, #418 ) ;
|
||||
#234 = CYLINDRICAL_SURFACE ( 'NONE', #348, 5.000000000000000000 ) ;
|
||||
#235 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ;
|
||||
#236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ;
|
||||
#237 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#238 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#239 = EDGE_CURVE ( 'NONE', #656, #468, #574, .T. ) ;
|
||||
#240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#241 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#242 = APPROVAL_DATE_TIME ( #49, #90 ) ;
|
||||
#243 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#245 = ORIENTED_EDGE ( 'NONE', *, *, #182, .T. ) ;
|
||||
#246 = CIRCLE ( 'NONE', #198, 3.750000000000000000 ) ;
|
||||
#247 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 4.592425496802574000E-016, 3.750000000000000000 ) ) ;
|
||||
#248 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000001100, 4.592425496802574000E-016, 3.750000000000000000 ) ) ;
|
||||
#249 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#250 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#251 = FACE_OUTER_BOUND ( 'NONE', #275, .T. ) ;
|
||||
#252 = AXIS2_PLACEMENT_3D ( 'NONE', #475, #253, #529 ) ;
|
||||
#253 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#254 = ORIENTED_EDGE ( 'NONE', *, *, #664, .F. ) ;
|
||||
#255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#256 = EDGE_CURVE ( 'NONE', #77, #676, #286, .T. ) ;
|
||||
#257 = FACE_OUTER_BOUND ( 'NONE', #376, .T. ) ;
|
||||
#258 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#259 = VERTEX_POINT ( 'NONE', #290 ) ;
|
||||
#260 = ORIENTED_EDGE ( 'NONE', *, *, #29, .F. ) ;
|
||||
#261 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#262 = AXIS2_PLACEMENT_3D ( 'NONE', #413, #157, #360 ) ;
|
||||
#263 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#264 = AXIS2_PLACEMENT_3D ( 'NONE', #34, #386, #82 ) ;
|
||||
#265 = DESIGN_CONTEXT ( 'detailed design', #185, 'design' ) ;
|
||||
#266 = TOROIDAL_SURFACE ( 'NONE', #118, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#267 = FACE_OUTER_BOUND ( 'NONE', #151, .T. ) ;
|
||||
#268 = FACE_OUTER_BOUND ( 'NONE', #528, .T. ) ;
|
||||
#269 = EDGE_LOOP ( 'NONE', ( #10, #556, #400, #235 ) ) ;
|
||||
#270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#271 = PERSON_AND_ORGANIZATION ( #580, #98 ) ;
|
||||
#272 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#273 = EDGE_CURVE ( 'NONE', #259, #221, #654, .T. ) ;
|
||||
#274 = FACE_OUTER_BOUND ( 'NONE', #35, .T. ) ;
|
||||
#275 = EDGE_LOOP ( 'NONE', ( #492, #631, #125, #419 ) ) ;
|
||||
#276 = CIRCLE ( 'NONE', #559, 5.000000000000000000 ) ;
|
||||
#277 = EDGE_LOOP ( 'NONE', ( #367, #299, #162, #23 ) ) ;
|
||||
#278 = FACE_OUTER_BOUND ( 'NONE', #678, .T. ) ;
|
||||
#279 = ORIENTED_EDGE ( 'NONE', *, *, #604, .F. ) ;
|
||||
#280 = AXIS2_PLACEMENT_3D ( 'NONE', #84, #623, #342 ) ;
|
||||
#281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#282 = EDGE_CURVE ( 'NONE', #665, #569, #602, .T. ) ;
|
||||
#283 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#285 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#286 = LINE ( 'NONE', #347, #374 ) ;
|
||||
#287 = VERTEX_POINT ( 'NONE', #389 ) ;
|
||||
#288 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#289 = LINE ( 'NONE', #315, #68 ) ;
|
||||
#290 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#291 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#292 = AXIS2_PLACEMENT_3D ( 'NONE', #59, #272, #659 ) ;
|
||||
#293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ;
|
||||
#294 = AXIS2_PLACEMENT_3D ( 'NONE', #247, #627, #293 ) ;
|
||||
#295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ;
|
||||
#296 = PRODUCT ( 'Long_Hammer_Slide_Pin', 'Long_Hammer_Slide_Pin', '', ( #128 ) ) ;
|
||||
#297 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#298 = AXIS2_PLACEMENT_3D ( 'NONE', #575, #249, #633 ) ;
|
||||
#299 = ORIENTED_EDGE ( 'NONE', *, *, #479, .T. ) ;
|
||||
#300 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #612, 'distance_accuracy_value', 'NONE');
|
||||
#301 = ORIENTED_EDGE ( 'NONE', *, *, #72, .F. ) ;
|
||||
#302 = EDGE_CURVE ( 'NONE', #660, #117, #650, .T. ) ;
|
||||
#303 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#304 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#306 = ORIENTED_EDGE ( 'NONE', *, *, #422, .F. ) ;
|
||||
#307 = TOROIDAL_SURFACE ( 'NONE', #126, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#308 = TOROIDAL_SURFACE ( 'NONE', #688, 3.750000000000000900, 1.250000000000000000 ) ;
|
||||
#309 = EDGE_CURVE ( 'NONE', #224, #207, #617, .T. ) ;
|
||||
#310 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#312 = APPROVAL_PERSON_ORGANIZATION ( #464, #90, #32 ) ;
|
||||
#313 = ORIENTED_EDGE ( 'NONE', *, *, #302, .T. ) ;
|
||||
#314 = ORIENTED_EDGE ( 'NONE', *, *, #567, .F. ) ;
|
||||
#315 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#316 = AXIS2_PLACEMENT_3D ( 'NONE', #71, #610, #281 ) ;
|
||||
#317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#318 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#320 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#321 = EDGE_CURVE ( 'NONE', #676, #187, #644, .T. ) ;
|
||||
#322 = EDGE_LOOP ( 'NONE', ( #254, #110 ) ) ;
|
||||
#323 = ORIENTED_EDGE ( 'NONE', *, *, #584, .T. ) ;
|
||||
#324 = CYLINDRICAL_SURFACE ( 'NONE', #140, 5.000000000000000000 ) ;
|
||||
#325 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#326 = VERTEX_POINT ( 'NONE', #634 ) ;
|
||||
#327 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#328 = CIRCLE ( 'NONE', #176, 5.000000000000000000 ) ;
|
||||
#329 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #173, #216 ) ;
|
||||
#330 = PERSON_AND_ORGANIZATION ( #580, #98 ) ;
|
||||
#331 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#332 = AXIS2_PLACEMENT_3D ( 'NONE', #189, #545, #137 ) ;
|
||||
#333 = ORIENTED_EDGE ( 'NONE', *, *, #383, .T. ) ;
|
||||
#334 = ORIENTED_EDGE ( 'NONE', *, *, #340, .T. ) ;
|
||||
#335 = EDGE_CURVE ( 'NONE', #187, #676, #639, .T. ) ;
|
||||
#336 = CC_DESIGN_APPROVAL ( #526, ( #555 ) ) ;
|
||||
#337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#338 = FACE_OUTER_BOUND ( 'NONE', #277, .T. ) ;
|
||||
#339 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#340 = EDGE_CURVE ( 'NONE', #440, #224, #649, .T. ) ;
|
||||
#341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#342 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#343 = APPROVAL_DATE_TIME ( #206, #526 ) ;
|
||||
#344 = LOCAL_TIME ( 15, 9, 22.00000000000000000, #485 ) ;
|
||||
#345 = ORIENTED_EDGE ( 'NONE', *, *, #677, .T. ) ;
|
||||
#346 = ORIENTED_EDGE ( 'NONE', *, *, #48, .T. ) ;
|
||||
#347 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#348 = AXIS2_PLACEMENT_3D ( 'NONE', #50, #589, #208 ) ;
|
||||
#349 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#350 = ORIENTED_EDGE ( 'NONE', *, *, #596, .T. ) ;
|
||||
#351 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ;
|
||||
#352 = EDGE_CURVE ( 'NONE', #287, #427, #615, .T. ) ;
|
||||
#353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#354 = APPROVAL_DATE_TIME ( #45, #363 ) ;
|
||||
#355 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#356 = ORIENTED_EDGE ( 'NONE', *, *, #282, .T. ) ;
|
||||
#357 = ORIENTED_EDGE ( 'NONE', *, *, #43, .F. ) ;
|
||||
#358 = AXIS2_PLACEMENT_3D ( 'NONE', #653, #319, #13 ) ;
|
||||
#359 = LINE ( 'NONE', #166, #520 ) ;
|
||||
#360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#361 = AXIS2_PLACEMENT_3D ( 'NONE', #561, #238, #620 ) ;
|
||||
#362 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#363 = APPROVAL ( #237, 'UNSPECIFIED' ) ;
|
||||
#364 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#365 = ORIENTED_EDGE ( 'NONE', *, *, #256, .F. ) ;
|
||||
#366 = ORIENTED_EDGE ( 'NONE', *, *, #532, .F. ) ;
|
||||
#367 = ORIENTED_EDGE ( 'NONE', *, *, #309, .F. ) ;
|
||||
#368 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#369 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#370 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#371 = EDGE_CURVE ( 'NONE', #656, #569, #613, .T. ) ;
|
||||
#372 = PERSON_AND_ORGANIZATION ( #580, #98 ) ;
|
||||
#373 = PERSON_AND_ORGANIZATION ( #580, #98 ) ;
|
||||
#374 = VECTOR ( 'NONE', #396, 1000.000000000000000 ) ;
|
||||
#375 = FACE_OUTER_BOUND ( 'NONE', #322, .T. ) ;
|
||||
#376 = EDGE_LOOP ( 'NONE', ( #350, #477, #607, #507 ) ) ;
|
||||
#377 = CIRCLE ( 'NONE', #51, 5.000000000000000000 ) ;
|
||||
#378 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#379 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#380 = FACE_OUTER_BOUND ( 'NONE', #470, .T. ) ;
|
||||
#381 = ORIENTED_EDGE ( 'NONE', *, *, #677, .F. ) ;
|
||||
#382 = ORIENTED_EDGE ( 'NONE', *, *, #479, .F. ) ;
|
||||
#383 = EDGE_CURVE ( 'NONE', #603, #287, #611, .T. ) ;
|
||||
#384 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#385 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#387 = CARTESIAN_POINT ( 'NONE', ( -22.49999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#388 = VERTEX_POINT ( 'NONE', #327 ) ;
|
||||
#389 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#390 = ORIENTED_EDGE ( 'NONE', *, *, #146, .T. ) ;
|
||||
#391 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#392 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, 5.000000000000000000 ) ) ;
|
||||
#393 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 4.592425496802574000E-016, 3.750000000000000000 ) ) ;
|
||||
#394 = AXIS2_PLACEMENT_3D ( 'NONE', #583, #618, #284 ) ;
|
||||
#395 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#396 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#397 = TOROIDAL_SURFACE ( 'NONE', #6, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#398 = FACE_OUTER_BOUND ( 'NONE', #102, .T. ) ;
|
||||
#399 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#400 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ;
|
||||
#401 = PLANE ( 'NONE', #593 ) ;
|
||||
#402 = ADVANCED_FACE ( 'NONE', ( #592 ), #614, .T. ) ;
|
||||
#403 = ADVANCED_FACE ( 'NONE', ( #553 ), #601, .F. ) ;
|
||||
#404 = LOCAL_TIME ( 15, 9, 22.00000000000000000, #562 ) ;
|
||||
#405 = CIRCLE ( 'NONE', #85, 5.000000000000000000 ) ;
|
||||
#406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#407 = EDGE_CURVE ( 'NONE', #665, #148, #591, .T. ) ;
|
||||
#408 = ORIENTED_EDGE ( 'NONE', *, *, #658, .F. ) ;
|
||||
#409 = ADVANCED_FACE ( 'NONE', ( #552 ), #414, .T. ) ;
|
||||
#410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#411 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#412 = ADVANCED_FACE ( 'NONE', ( #538 ), #577, .T. ) ;
|
||||
#413 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#414 = TOROIDAL_SURFACE ( 'NONE', #180, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#415 = ORIENTED_EDGE ( 'NONE', *, *, #146, .F. ) ;
|
||||
#416 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, -3.750000000000000900 ) ) ;
|
||||
#417 = ORIENTED_EDGE ( 'NONE', *, *, #63, .F. ) ;
|
||||
#418 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#419 = ORIENTED_EDGE ( 'NONE', *, *, #335, .F. ) ;
|
||||
#420 = ADVANCED_FACE ( 'NONE', ( #537 ), #585, .T. ) ;
|
||||
#421 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#422 = EDGE_CURVE ( 'NONE', #440, #326, #518, .T. ) ;
|
||||
#423 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #296 ) ) ;
|
||||
#424 = ADVANCED_FACE ( 'NONE', ( #274 ), #509, .F. ) ;
|
||||
#425 = TOROIDAL_SURFACE ( 'NONE', #522, 3.750000000000000900, 1.250000000000000000 ) ;
|
||||
#426 = FACE_OUTER_BOUND ( 'NONE', #691, .T. ) ;
|
||||
#427 = VERTEX_POINT ( 'NONE', #391 ) ;
|
||||
#428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#429 = ORIENTED_EDGE ( 'NONE', *, *, #371, .F. ) ;
|
||||
#430 = ADVANCED_FACE ( 'NONE', ( #508 ), #496, .F. ) ;
|
||||
#431 = ADVANCED_FACE ( 'NONE', ( #30 ), #401, .F. ) ;
|
||||
#432 = ADVANCED_FACE ( 'NONE', ( #149 ), #451, .T. ) ;
|
||||
#433 = AXIS2_PLACEMENT_3D ( 'NONE', #506, #181, #446 ) ;
|
||||
#434 = CIRCLE ( 'NONE', #435, 3.750000000000000000 ) ;
|
||||
#435 = AXIS2_PLACEMENT_3D ( 'NONE', #387, #83, #255 ) ;
|
||||
#436 = FACE_OUTER_BOUND ( 'NONE', #534, .T. ) ;
|
||||
#437 = ORIENTED_EDGE ( 'NONE', *, *, #20, .T. ) ;
|
||||
#438 = ADVANCED_FACE ( 'NONE', ( #480 ), #8, .T. ) ;
|
||||
#439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#440 = VERTEX_POINT ( 'NONE', #670 ) ;
|
||||
#441 = ADVANCED_FACE ( 'NONE', ( #426 ), #500, .F. ) ;
|
||||
#442 = EDGE_CURVE ( 'NONE', #207, #326, #434, .T. ) ;
|
||||
#443 = PLANE ( 'NONE', #316 ) ;
|
||||
#444 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #161, #265 ) ;
|
||||
#445 = ADVANCED_FACE ( 'NONE', ( #436 ), #576, .T. ) ;
|
||||
#446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#447 = ADVANCED_FACE ( 'NONE', ( #398 ), #397, .F. ) ;
|
||||
#448 = ADVANCED_FACE ( 'NONE', ( #375 ), #443, .T. ) ;
|
||||
#449 = ORIENTED_EDGE ( 'NONE', *, *, #596, .F. ) ;
|
||||
#450 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#451 = CYLINDRICAL_SURFACE ( 'NONE', #394, 5.000000000000000000 ) ;
|
||||
#452 = ADVANCED_FACE ( 'NONE', ( #453 ), #324, .T. ) ;
|
||||
#453 = FACE_OUTER_BOUND ( 'NONE', #19, .T. ) ;
|
||||
#454 = ADVANCED_FACE ( 'NONE', ( #380 ), #425, .F. ) ;
|
||||
#455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#456 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
|
||||
#457 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999300, 4.592425496802575000E-016, 3.750000000000000900 ) ) ;
|
||||
#458 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 5.357829746269669600E-016, 3.750000000000000000 ) ) ;
|
||||
#459 = ORIENTED_EDGE ( 'NONE', *, *, #20, .F. ) ;
|
||||
#460 = EDGE_CURVE ( 'NONE', #566, #388, #328, .T. ) ;
|
||||
#461 = ADVANCED_FACE ( 'NONE', ( #338 ), #308, .F. ) ;
|
||||
#462 = ADVANCED_FACE ( 'NONE', ( #267 ), #307, .F. ) ;
|
||||
#463 = ADVANCED_FACE ( 'NONE', ( #257 ), #234, .T. ) ;
|
||||
#464 = PERSON_AND_ORGANIZATION ( #580, #98 ) ;
|
||||
#465 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#466 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ;
|
||||
#467 = ORIENTED_EDGE ( 'NONE', *, *, #604, .T. ) ;
|
||||
#468 = VERTEX_POINT ( 'NONE', #489 ) ;
|
||||
#469 = ADVANCED_FACE ( 'NONE', ( #278 ), #202, .T. ) ;
|
||||
#470 = EDGE_LOOP ( 'NONE', ( #334, #219, #169, #306 ) ) ;
|
||||
#471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#472 = ADVANCED_FACE ( 'NONE', ( #251 ), #184, .T. ) ;
|
||||
#473 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#474 = ADVANCED_FACE ( 'NONE', ( #268 ), #218, .T. ) ;
|
||||
#475 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#476 = ADVANCED_FACE ( 'NONE', ( #133 ), #266, .T. ) ;
|
||||
#477 = ORIENTED_EDGE ( 'NONE', *, *, #72, .T. ) ;
|
||||
#478 = ORIENTED_EDGE ( 'NONE', *, *, #340, .F. ) ;
|
||||
#479 = EDGE_CURVE ( 'NONE', #224, #440, #170, .T. ) ;
|
||||
#480 = FACE_OUTER_BOUND ( 'NONE', #637, .T. ) ;
|
||||
#481 = EDGE_LOOP ( 'NONE', ( #415, #467, #519, #408 ) ) ;
|
||||
#482 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#483 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#485 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#487 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#488 = AXIS2_PLACEMENT_3D ( 'NONE', #517, #191, #570 ) ;
|
||||
#489 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#490 = ORIENTED_EDGE ( 'NONE', *, *, #96, .T. ) ;
|
||||
#491 = AXIS2_PLACEMENT_3D ( 'NONE', #513, #564, #240 ) ;
|
||||
#492 = ORIENTED_EDGE ( 'NONE', *, *, #636, .F. ) ;
|
||||
#493 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #16, #671, ( #444 ) ) ;
|
||||
#494 = AXIS2_PLACEMENT_3D ( 'NONE', #303, #682, #450 ) ;
|
||||
#495 = SHAPE_DEFINITION_REPRESENTATION ( #174, #179 ) ;
|
||||
#496 = TOROIDAL_SURFACE ( 'NONE', #252, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#498 = ORIENTED_EDGE ( 'NONE', *, *, #689, .T. ) ;
|
||||
#499 = EDGE_CURVE ( 'NONE', #148, #117, #690, .T. ) ;
|
||||
#500 = TOROIDAL_SURFACE ( 'NONE', #491, 3.750000000000000900, 1.250000000000000000 ) ;
|
||||
#501 = AXIS2_PLACEMENT_3D ( 'NONE', #87, #465, #138 ) ;
|
||||
#502 = ORIENTED_EDGE ( 'NONE', *, *, #43, .T. ) ;
|
||||
#503 = ORIENTED_EDGE ( 'NONE', *, *, #273, .T. ) ;
|
||||
#504 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#505 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#506 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#507 = ORIENTED_EDGE ( 'NONE', *, *, #273, .F. ) ;
|
||||
#508 = FACE_OUTER_BOUND ( 'NONE', #211, .T. ) ;
|
||||
#509 = TOROIDAL_SURFACE ( 'NONE', #70, 3.750000000000000900, 1.250000000000000000 ) ;
|
||||
#510 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#511 = EDGE_CURVE ( 'NONE', #586, #77, #405, .T. ) ;
|
||||
#512 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
|
||||
#513 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#514 = DATE_TIME_ROLE ( 'classification_date' ) ;
|
||||
#515 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ;
|
||||
#516 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 6.123233995736766300E-016, -5.000000000000000000 ) ) ;
|
||||
#517 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 4.592425496802574000E-016, 3.750000000000000000 ) ) ;
|
||||
#518 = CIRCLE ( 'NONE', #213, 1.250000000000000200 ) ;
|
||||
#519 = ORIENTED_EDGE ( 'NONE', *, *, #109, .F. ) ;
|
||||
#520 = VECTOR ( 'NONE', #158, 1000.000000000000000 ) ;
|
||||
#521 = AXIS2_PLACEMENT_3D ( 'NONE', #370, #64, #428 ) ;
|
||||
#522 = AXIS2_PLACEMENT_3D ( 'NONE', #74, #25, #510 ) ;
|
||||
#523 = CARTESIAN_POINT ( 'NONE', ( -22.49999999999999600, 5.357829746269669600E-016, 3.750000000000000000 ) ) ;
|
||||
#524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#525 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#526 = APPROVAL ( #188, 'UNSPECIFIED' ) ;
|
||||
#527 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #373, #512, ( #296 ) ) ;
|
||||
#528 = EDGE_LOOP ( 'NONE', ( #579, #417, #313, #175 ) ) ;
|
||||
#529 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#530 = ORIENTED_EDGE ( 'NONE', *, *, #442, .F. ) ;
|
||||
#531 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#532 = EDGE_CURVE ( 'NONE', #566, #117, #142, .T. ) ;
|
||||
#533 = APPROVAL_PERSON_ORGANIZATION ( #675, #363, #619 ) ;
|
||||
#534 = EDGE_LOOP ( 'NONE', ( #301, #346, #503, #53 ) ) ;
|
||||
#535 = CIRCLE ( 'NONE', #648, 3.750000000000000000 ) ;
|
||||
#536 = AXIS2_PLACEMENT_3D ( 'NONE', #588, #543, #486 ) ;
|
||||
#537 = FACE_OUTER_BOUND ( 'NONE', #134, .T. ) ;
|
||||
#538 = FACE_OUTER_BOUND ( 'NONE', #481, .T. ) ;
|
||||
#539 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#540 = CC_DESIGN_SECURITY_CLASSIFICATION ( #555, ( #161 ) ) ;
|
||||
#541 = ORIENTED_EDGE ( 'NONE', *, *, #29, .T. ) ;
|
||||
#542 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#544 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#545 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#546 = EDGE_CURVE ( 'NONE', #427, #221, #123, .T. ) ;
|
||||
#547 = ADVANCED_FACE ( 'NONE', ( #201 ), #114, .T. ) ;
|
||||
#548 = VERTEX_POINT ( 'NONE', #168 ) ;
|
||||
#549 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ;
|
||||
#550 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #544, #220 ) ;
|
||||
#551 = AXIS2_PLACEMENT_3D ( 'NONE', #597, #369, #62 ) ;
|
||||
#552 = FACE_OUTER_BOUND ( 'NONE', #652, .T. ) ;
|
||||
#553 = FACE_OUTER_BOUND ( 'NONE', #24, .T. ) ;
|
||||
#554 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#555 = SECURITY_CLASSIFICATION ( '', '', #456 ) ;
|
||||
#556 = ORIENTED_EDGE ( 'NONE', *, *, #129, .F. ) ;
|
||||
#557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#558 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#559 = AXIS2_PLACEMENT_3D ( 'NONE', #539, #214, #55 ) ;
|
||||
#560 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #185 ) ;
|
||||
#561 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#562 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#563 = CLOSED_SHELL ( 'NONE', ( #403, #438, #447, #420, #454, #412, #424, #409, #469, #463, #452, #432, #445, #472, #431, #448, #402, #441, #476, #461, #474, #430, #547, #462 ) ) ;
|
||||
#564 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#565 = APPROVAL_ROLE ( '' ) ;
|
||||
#566 = VERTEX_POINT ( 'NONE', #79 ) ;
|
||||
#567 = EDGE_CURVE ( 'NONE', #665, #660, #106, .T. ) ;
|
||||
#568 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#569 = VERTEX_POINT ( 'NONE', #27 ) ;
|
||||
#570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ;
|
||||
#571 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, 5.357829746269669600E-016, 3.750000000000000000 ) ) ;
|
||||
#572 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #568, #243 ) ;
|
||||
#573 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#574 = CIRCLE ( 'NONE', #572, 1.250000000000000200 ) ;
|
||||
#575 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#576 = CYLINDRICAL_SURFACE ( 'NONE', #663, 5.000000000000000000 ) ;
|
||||
#577 = TOROIDAL_SURFACE ( 'NONE', #280, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#578 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#579 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ;
|
||||
#580 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;
|
||||
#581 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#582 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #271, #285, ( #444 ) ) ;
|
||||
#583 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#584 = EDGE_CURVE ( 'NONE', #603, #221, #99, .T. ) ;
|
||||
#585 = TOROIDAL_SURFACE ( 'NONE', #143, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#586 = VERTEX_POINT ( 'NONE', #186 ) ;
|
||||
#587 = ORIENTED_EDGE ( 'NONE', *, *, #616, .T. ) ;
|
||||
#588 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#589 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#590 = AXIS2_PLACEMENT_3D ( 'NONE', #457, #131, #515 ) ;
|
||||
#591 = CIRCLE ( 'NONE', #488, 1.250000000000000200 ) ;
|
||||
#592 = FACE_OUTER_BOUND ( 'NONE', #269, .T. ) ;
|
||||
#593 = AXIS2_PLACEMENT_3D ( 'NONE', #145, #638, #305 ) ;
|
||||
#594 = ORIENTED_EDGE ( 'NONE', *, *, #567, .T. ) ;
|
||||
#595 = ORIENTED_EDGE ( 'NONE', *, *, #204, .T. ) ;
|
||||
#596 = EDGE_CURVE ( 'NONE', #259, #47, #105, .T. ) ;
|
||||
#597 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#598 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#599 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #483, #155 ) ;
|
||||
#600 = ORIENTED_EDGE ( 'NONE', *, *, #129, .T. ) ;
|
||||
#601 = TOROIDAL_SURFACE ( 'NONE', #223, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#602 = CIRCLE ( 'NONE', #192, 1.250000000000000200 ) ;
|
||||
#603 = VERTEX_POINT ( 'NONE', #458 ) ;
|
||||
#604 = EDGE_CURVE ( 'NONE', #77, #207, #93, .T. ) ;
|
||||
#605 = LOCAL_TIME ( 15, 9, 22.00000000000000000, #487 ) ;
|
||||
#606 = AXIS2_PLACEMENT_3D ( 'NONE', #310, #2, #353 ) ;
|
||||
#607 = ORIENTED_EDGE ( 'NONE', *, *, #546, .T. ) ;
|
||||
#608 = ORIENTED_EDGE ( 'NONE', *, *, #48, .F. ) ;
|
||||
#609 = ORIENTED_EDGE ( 'NONE', *, *, #664, .T. ) ;
|
||||
#610 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#611 = CIRCLE ( 'NONE', #521, 3.750000000000000000 ) ;
|
||||
#612 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#613 = CIRCLE ( 'NONE', #292, 2.499999999999999600 ) ;
|
||||
#614 = TOROIDAL_SURFACE ( 'NONE', #329, 3.750000000000000000, 1.250000000000000000 ) ;
|
||||
#615 = CIRCLE ( 'NONE', #358, 1.250000000000000200 ) ;
|
||||
#616 = EDGE_CURVE ( 'NONE', #259, #548, #76, .T. ) ;
|
||||
#617 = CIRCLE ( 'NONE', #590, 1.250000000000000200 ) ;
|
||||
#618 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#619 = APPROVAL_ROLE ( '' ) ;
|
||||
#620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#622 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#623 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#624 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#625 = APPROVAL_PERSON_ORGANIZATION ( #330, #526, #565 ) ;
|
||||
#626 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#627 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#628 = PERSON_AND_ORGANIZATION ( #580, #98 ) ;
|
||||
#629 = ORIENTED_EDGE ( 'NONE', *, *, #642, .F. ) ;
|
||||
#630 = AXIS2_PLACEMENT_3D ( 'NONE', #684, #624, #33 ) ;
|
||||
#631 = ORIENTED_EDGE ( 'NONE', *, *, #511, .T. ) ;
|
||||
#632 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ;
|
||||
#633 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#634 = CARTESIAN_POINT ( 'NONE', ( -22.49999999999999600, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#636 = EDGE_CURVE ( 'NONE', #586, #187, #73, .T. ) ;
|
||||
#637 = EDGE_LOOP ( 'NONE', ( #449, #587, #357, #381 ) ) ;
|
||||
#638 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#639 = CIRCLE ( 'NONE', #550, 5.000000000000000000 ) ;
|
||||
#640 = ORIENTED_EDGE ( 'NONE', *, *, #239, .F. ) ;
|
||||
#641 = VECTOR ( 'NONE', #37, 1000.000000000000000 ) ;
|
||||
#642 = EDGE_CURVE ( 'NONE', #569, #548, #61, .T. ) ;
|
||||
#643 = CIRCLE ( 'NONE', #536, 1.250000000000000200 ) ;
|
||||
#644 = CIRCLE ( 'NONE', #4, 5.000000000000000000 ) ;
|
||||
#645 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#646 = ORIENTED_EDGE ( 'NONE', *, *, #239, .T. ) ;
|
||||
#647 = EDGE_LOOP ( 'NONE', ( #52, #608, #345, #210 ) ) ;
|
||||
#648 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #150, #108 ) ;
|
||||
#649 = CIRCLE ( 'NONE', #154, 2.500000000000000400 ) ;
|
||||
#650 = CIRCLE ( 'NONE', #630, 1.250000000000000200 ) ;
|
||||
#651 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#652 = EDGE_LOOP ( 'NONE', ( #119, #323, #1, #549 ) ) ;
|
||||
#653 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#654 = LINE ( 'NONE', #297, #641 ) ;
|
||||
#655 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#656 = VERTEX_POINT ( 'NONE', #680 ) ;
|
||||
#657 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#658 = EDGE_CURVE ( 'NONE', #586, #326, #107, .T. ) ;
|
||||
#659 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#660 = VERTEX_POINT ( 'NONE', #573 ) ;
|
||||
#661 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ;
|
||||
#662 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #22, #439 ) ;
|
||||
#663 = AXIS2_PLACEMENT_3D ( 'NONE', #384, #673, #621 ) ;
|
||||
#664 = EDGE_CURVE ( 'NONE', #388, #566, #38, .T. ) ;
|
||||
#665 = VERTEX_POINT ( 'NONE', #571 ) ;
|
||||
#666 = CIRCLE ( 'NONE', #681, 5.000000000000000000 ) ;
|
||||
#667 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#668 = ORIENTED_EDGE ( 'NONE', *, *, #658, .T. ) ;
|
||||
#669 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#670 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, -2.500000000000000400 ) ) ;
|
||||
#671 = DATE_TIME_ROLE ( 'creation_date' ) ;
|
||||
#672 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#673 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#674 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#675 = PERSON_AND_ORGANIZATION ( #580, #98 ) ;
|
||||
#676 = VERTEX_POINT ( 'NONE', #141 ) ;
|
||||
#677 = EDGE_CURVE ( 'NONE', #47, #468, #28, .T. ) ;
|
||||
#678 = EDGE_LOOP ( 'NONE', ( #390, #60, #215, #365 ) ) ;
|
||||
#679 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#680 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, -2.499999999999999600 ) ) ;
|
||||
#681 = AXIS2_PLACEMENT_3D ( 'NONE', #7, #3, #270 ) ;
|
||||
#682 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#683 = MANIFOLD_SOLID_BREP ( 'Fillet1', #563 ) ;
|
||||
#684 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, -3.750000000000000000 ) ) ;
|
||||
#685 = CIRCLE ( 'NONE', #606, 2.499999999999999600 ) ;
|
||||
#686 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999300, 0.0000000000000000000, -3.750000000000000900 ) ) ;
|
||||
#687 = ORIENTED_EDGE ( 'NONE', *, *, #689, .F. ) ;
|
||||
#688 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #355, #156 ) ;
|
||||
#689 = EDGE_CURVE ( 'NONE', #603, #224, #5, .T. ) ;
|
||||
#690 = CIRCLE ( 'NONE', #159, 5.000000000000000000 ) ;
|
||||
#691 = EDGE_LOOP ( 'NONE', ( #687, #333, #541, #382 ) ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
|
|
@ -0,0 +1,192 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP203' ),
|
||||
'1' );
|
||||
FILE_NAME ('Short_Hammer_Slide_Pin.STEP',
|
||||
'2013-11-14T05:09:08',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#2 = PERSON_AND_ORGANIZATION ( #102, #144 ) ;
|
||||
#3 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#4 = MECHANICAL_CONTEXT ( 'NONE', #167, 'mechanical' ) ;
|
||||
#5 = SECURITY_CLASSIFICATION ( '', '', #11 ) ;
|
||||
#6 = FACE_OUTER_BOUND ( 'NONE', #77, .T. ) ;
|
||||
#7 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#8 = PERSON_AND_ORGANIZATION ( #102, #144 ) ;
|
||||
#9 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #114, 'distance_accuracy_value', 'NONE');
|
||||
#10 = DATE_AND_TIME ( #47, #76 ) ;
|
||||
#11 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
|
||||
#12 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#13 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ;
|
||||
#14 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#15 = DATE_AND_TIME ( #49, #157 ) ;
|
||||
#16 = LINE ( 'NONE', #99, #174 ) ;
|
||||
#17 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #8, #7, ( #41 ) ) ;
|
||||
#18 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#19 = ORIENTED_EDGE ( 'NONE', *, *, #168, .F. ) ;
|
||||
#20 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #27, #95, ( #5 ) ) ;
|
||||
#21 = DATE_TIME_ROLE ( 'classification_date' ) ;
|
||||
#22 = VERTEX_POINT ( 'NONE', #113 ) ;
|
||||
#23 = CC_DESIGN_APPROVAL ( #34, ( #41 ) ) ;
|
||||
#24 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#25 = ORIENTED_EDGE ( 'NONE', *, *, #135, .F. ) ;
|
||||
#26 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#27 = PERSON_AND_ORGANIZATION ( #102, #144 ) ;
|
||||
#28 = ORIENTED_EDGE ( 'NONE', *, *, #145, .T. ) ;
|
||||
#29 = DATE_AND_TIME ( #56, #169 ) ;
|
||||
#30 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#31 = APPROVAL_PERSON_ORGANIZATION ( #83, #34, #85 ) ;
|
||||
#32 = PERSON_AND_ORGANIZATION ( #102, #144 ) ;
|
||||
#33 = FACE_OUTER_BOUND ( 'NONE', #171, .T. ) ;
|
||||
#34 = APPROVAL ( #170, 'UNSPECIFIED' ) ;
|
||||
#35 = APPROVAL_ROLE ( '' ) ;
|
||||
#36 = CYLINDRICAL_SURFACE ( 'NONE', #87, 4.999999999999999100 ) ;
|
||||
#37 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#38 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ;
|
||||
#39 = PLANE ( 'NONE', #100 ) ;
|
||||
#40 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#41 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #130, .NOT_KNOWN. ) ;
|
||||
#42 = PERSON_AND_ORGANIZATION ( #102, #144 ) ;
|
||||
#43 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #130 ) ) ;
|
||||
#44 = CC_DESIGN_SECURITY_CLASSIFICATION ( #5, ( #41 ) ) ;
|
||||
#45 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #118 ) ;
|
||||
#46 = CC_DESIGN_APPROVAL ( #51, ( #5 ) ) ;
|
||||
#47 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#48 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #82, #73, ( #60 ) ) ;
|
||||
#49 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#50 = ORIENTED_EDGE ( 'NONE', *, *, #151, .T. ) ;
|
||||
#51 = APPROVAL ( #110, 'UNSPECIFIED' ) ;
|
||||
#52 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#53 = VECTOR ( 'NONE', #78, 1000.000000000000000 ) ;
|
||||
#54 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #68, #21, ( #5 ) ) ;
|
||||
#55 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #106, #146, ( #60 ) ) ;
|
||||
#56 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#57 = APPROVAL_ROLE ( '' ) ;
|
||||
#58 = CC_DESIGN_APPROVAL ( #59, ( #60 ) ) ;
|
||||
#59 = APPROVAL ( #134, 'UNSPECIFIED' ) ;
|
||||
#60 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #41, #80 ) ;
|
||||
#61 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#62 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #142, #89, ( #130 ) ) ;
|
||||
#63 = LINE ( 'NONE', #38, #53 ) ;
|
||||
#64 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#65 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#66 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#67 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#68 = DATE_AND_TIME ( #61, #173 ) ;
|
||||
#69 = FACE_OUTER_BOUND ( 'NONE', #119, .T. ) ;
|
||||
#70 = EDGE_LOOP ( 'NONE', ( #158, #25, #84, #121 ) ) ;
|
||||
#71 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #32, #93, ( #41 ) ) ;
|
||||
#72 = SHAPE_DEFINITION_REPRESENTATION ( #156, #172 ) ;
|
||||
#73 = DATE_TIME_ROLE ( 'creation_date' ) ;
|
||||
#74 = AXIS2_PLACEMENT_3D ( 'NONE', #79, #163, #81 ) ;
|
||||
#75 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #150 ) ;
|
||||
#76 = LOCAL_TIME ( 15, 9, 8.000000000000000000, #108 ) ;
|
||||
#77 = EDGE_LOOP ( 'NONE', ( #160, #117 ) ) ;
|
||||
#78 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#79 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#80 = DESIGN_CONTEXT ( 'detailed design', #118, 'design' ) ;
|
||||
#81 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#82 = DATE_AND_TIME ( #111, #149 ) ;
|
||||
#83 = PERSON_AND_ORGANIZATION ( #102, #144 ) ;
|
||||
#84 = ORIENTED_EDGE ( 'NONE', *, *, #131, .T. ) ;
|
||||
#85 = APPROVAL_ROLE ( '' ) ;
|
||||
#86 = AXIS2_PLACEMENT_3D ( 'NONE', #26, #52, #24 ) ;
|
||||
#87 = AXIS2_PLACEMENT_3D ( 'NONE', #161, #1, #37 ) ;
|
||||
#88 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ;
|
||||
#89 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
|
||||
#90 = APPROVAL_PERSON_ORGANIZATION ( #42, #59, #57 ) ;
|
||||
#91 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #9 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #114, #40, #129 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#92 = CIRCLE ( 'NONE', #116, 4.999999999999999100 ) ;
|
||||
#93 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
|
||||
#94 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #3, #127 ) ;
|
||||
#95 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
|
||||
#96 = CIRCLE ( 'NONE', #98, 4.999999999999999100 ) ;
|
||||
#97 = ORIENTED_EDGE ( 'NONE', *, *, #151, .F. ) ;
|
||||
#98 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #104, #30 ) ;
|
||||
#99 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ;
|
||||
#100 = AXIS2_PLACEMENT_3D ( 'NONE', #139, #67, #101 ) ;
|
||||
#101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#102 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;
|
||||
#103 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ;
|
||||
#104 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#105 = VERTEX_POINT ( 'NONE', #88 ) ;
|
||||
#106 = PERSON_AND_ORGANIZATION ( #102, #144 ) ;
|
||||
#107 = CYLINDRICAL_SURFACE ( 'NONE', #86, 4.999999999999999100 ) ;
|
||||
#108 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#109 = CIRCLE ( 'NONE', #122, 4.999999999999999100 ) ;
|
||||
#110 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#111 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#112 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#113 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ;
|
||||
#114 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#115 = ORIENTED_EDGE ( 'NONE', *, *, #131, .F. ) ;
|
||||
#116 = AXIS2_PLACEMENT_3D ( 'NONE', #64, #65, #66 ) ;
|
||||
#117 = ORIENTED_EDGE ( 'NONE', *, *, #168, .T. ) ;
|
||||
#118 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#119 = EDGE_LOOP ( 'NONE', ( #19, #28, #50, #115 ) ) ;
|
||||
#120 = APPROVAL_DATE_TIME ( #29, #34 ) ;
|
||||
#121 = ORIENTED_EDGE ( 'NONE', *, *, #141, .T. ) ;
|
||||
#122 = AXIS2_PLACEMENT_3D ( 'NONE', #138, #125, #12 ) ;
|
||||
#123 = AXIS2_PLACEMENT_3D ( 'NONE', #137, #175, #124 ) ;
|
||||
#124 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#125 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#126 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#128 = CIRCLE ( 'NONE', #123, 4.999999999999999100 ) ;
|
||||
#129 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#130 = PRODUCT ( 'Short_Hammer_Slide_Pin', 'Short_Hammer_Slide_Pin', '', ( #4 ) ) ;
|
||||
#131 = EDGE_CURVE ( 'NONE', #147, #22, #63, .T. ) ;
|
||||
#132 = APPROVAL_DATE_TIME ( #15, #51 ) ;
|
||||
#133 = FACE_OUTER_BOUND ( 'NONE', #70, .T. ) ;
|
||||
#134 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#135 = EDGE_CURVE ( 'NONE', #147, #105, #128, .T. ) ;
|
||||
#136 = APPROVAL_DATE_TIME ( #10, #59 ) ;
|
||||
#137 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#138 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#139 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#140 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#141 = EDGE_CURVE ( 'NONE', #22, #165, #109, .T. ) ;
|
||||
#142 = PERSON_AND_ORGANIZATION ( #102, #144 ) ;
|
||||
#143 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #167 ) ;
|
||||
#144 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ;
|
||||
#145 = EDGE_CURVE ( 'NONE', #105, #165, #16, .T. ) ;
|
||||
#146 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#147 = VERTEX_POINT ( 'NONE', #13 ) ;
|
||||
#148 = APPROVAL_PERSON_ORGANIZATION ( #2, #51, #35 ) ;
|
||||
#149 = LOCAL_TIME ( 15, 9, 8.000000000000000000, #140 ) ;
|
||||
#150 = CLOSED_SHELL ( 'NONE', ( #154, #155, #153, #152 ) ) ;
|
||||
#151 = EDGE_CURVE ( 'NONE', #165, #22, #92, .T. ) ;
|
||||
#152 = ADVANCED_FACE ( 'NONE', ( #33 ), #39, .F. ) ;
|
||||
#153 = ADVANCED_FACE ( 'NONE', ( #6 ), #162, .T. ) ;
|
||||
#154 = ADVANCED_FACE ( 'NONE', ( #69 ), #36, .T. ) ;
|
||||
#155 = ADVANCED_FACE ( 'NONE', ( #133 ), #107, .T. ) ;
|
||||
#156 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #60 ) ;
|
||||
#157 = LOCAL_TIME ( 15, 9, 8.000000000000000000, #18 ) ;
|
||||
#158 = ORIENTED_EDGE ( 'NONE', *, *, #145, .F. ) ;
|
||||
#159 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#160 = ORIENTED_EDGE ( 'NONE', *, *, #135, .T. ) ;
|
||||
#161 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#162 = PLANE ( 'NONE', #94 ) ;
|
||||
#163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#164 = ORIENTED_EDGE ( 'NONE', *, *, #141, .F. ) ;
|
||||
#165 = VERTEX_POINT ( 'NONE', #103 ) ;
|
||||
#166 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#167 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#168 = EDGE_CURVE ( 'NONE', #105, #147, #96, .T. ) ;
|
||||
#169 = LOCAL_TIME ( 15, 9, 8.000000000000000000, #166 ) ;
|
||||
#170 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#171 = EDGE_LOOP ( 'NONE', ( #164, #97 ) ) ;
|
||||
#172 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Short_Hammer_Slide_Pin', ( #75, #74 ), #91 ) ;
|
||||
#173 = LOCAL_TIME ( 15, 9, 8.000000000000000000, #126 ) ;
|
||||
#174 = VECTOR ( 'NONE', #112, 1000.000000000000000 ) ;
|
||||
#175 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,468 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP203' ),
|
||||
'1' );
|
||||
FILE_NAME ('Trigger_Spring_Cap.STEP',
|
||||
'2013-11-14T05:07:58',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#2 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #34 ) ;
|
||||
#3 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#4 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#5 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#6 = ORIENTED_EDGE ( 'NONE', *, *, #384, .F. ) ;
|
||||
#7 = LINE ( 'NONE', #251, #112 ) ;
|
||||
#8 = EDGE_CURVE ( 'NONE', #209, #437, #159, .T. ) ;
|
||||
#9 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#10 = VECTOR ( 'NONE', #197, 1000.000000000000000 ) ;
|
||||
#11 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998200, 0.0000000000000000000, -0.9999999999999997800 ) ) ;
|
||||
#12 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#13 = CIRCLE ( 'NONE', #360, 2.500000000000000000 ) ;
|
||||
#14 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#15 = VECTOR ( 'NONE', #161, 1000.000000000000000 ) ;
|
||||
#16 = FACE_BOUND ( 'NONE', #417, .T. ) ;
|
||||
#17 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#18 = LINE ( 'NONE', #420, #10 ) ;
|
||||
#19 = LINE ( 'NONE', #297, #15 ) ;
|
||||
#20 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#21 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#22 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000001800, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#23 = VECTOR ( 'NONE', #114, 1000.000000000000000 ) ;
|
||||
#24 = CIRCLE ( 'NONE', #361, 5.000000000000000900 ) ;
|
||||
#25 = LINE ( 'NONE', #262, #393 ) ;
|
||||
#26 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#27 = LINE ( 'NONE', #42, #97 ) ;
|
||||
#28 = CIRCLE ( 'NONE', #359, 2.500000000000001300 ) ;
|
||||
#29 = EDGE_CURVE ( 'NONE', #426, #407, #443, .T. ) ;
|
||||
#30 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#31 = DIRECTION ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#32 = CIRCLE ( 'NONE', #362, 5.000000000000000000 ) ;
|
||||
#33 = APPROVAL_PERSON_ORGANIZATION ( #392, #340, #186 ) ;
|
||||
#34 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#35 = VECTOR ( 'NONE', #84, 1000.000000000000000 ) ;
|
||||
#36 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#37 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#38 = EDGE_CURVE ( 'NONE', #389, #409, #160, .T. ) ;
|
||||
#39 = VECTOR ( 'NONE', #45, 1000.000000000000000 ) ;
|
||||
#40 = LINE ( 'NONE', #72, #23 ) ;
|
||||
#41 = VECTOR ( 'NONE', #175, 1000.000000000000000 ) ;
|
||||
#42 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#43 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#44 = LINE ( 'NONE', #153, #41 ) ;
|
||||
#45 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#46 = APPROVAL_DATE_TIME ( #135, #340 ) ;
|
||||
#47 = CIRCLE ( 'NONE', #377, 2.500000000000000000 ) ;
|
||||
#48 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#49 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#50 = PERSON_AND_ORGANIZATION ( #176, #195 ) ;
|
||||
#51 = VECTOR ( 'NONE', #385, 1000.000000000000000 ) ;
|
||||
#52 = CYLINDRICAL_SURFACE ( 'NONE', #366, 2.500000000000000000 ) ;
|
||||
#53 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #440, 'distance_accuracy_value', 'NONE');
|
||||
#54 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#55 = VERTEX_POINT ( 'NONE', #48 ) ;
|
||||
#56 = APPROVAL_PERSON_ORGANIZATION ( #217, #304, #248 ) ;
|
||||
#57 = DATE_AND_TIME ( #73, #444 ) ;
|
||||
#58 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#59 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #191 ) ) ;
|
||||
#60 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#61 = LINE ( 'NONE', #12, #39 ) ;
|
||||
#62 = CIRCLE ( 'NONE', #367, 2.500000000000000000 ) ;
|
||||
#63 = CIRCLE ( 'NONE', #364, 5.000000000000000000 ) ;
|
||||
#64 = CYLINDRICAL_SURFACE ( 'NONE', #380, 2.500000000000000000 ) ;
|
||||
#65 = LINE ( 'NONE', #324, #51 ) ;
|
||||
#66 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#67 = CYLINDRICAL_SURFACE ( 'NONE', #383, 2.500000000000001300 ) ;
|
||||
#68 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#69 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#70 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#71 = CC_DESIGN_SECURITY_CLASSIFICATION ( #139, ( #331 ) ) ;
|
||||
#72 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000001800, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#73 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#74 = FACE_OUTER_BOUND ( 'NONE', #343, .T. ) ;
|
||||
#75 = FACE_OUTER_BOUND ( 'NONE', #398, .T. ) ;
|
||||
#76 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#77 = PLANE ( 'NONE', #396 ) ;
|
||||
#78 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#79 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#80 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#81 = EDGE_CURVE ( 'NONE', #101, #55, #151, .T. ) ;
|
||||
#82 = FACE_OUTER_BOUND ( 'NONE', #365, .T. ) ;
|
||||
#83 = CYLINDRICAL_SURFACE ( 'NONE', #390, 5.000000000000000900 ) ;
|
||||
#84 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#85 = FACE_OUTER_BOUND ( 'NONE', #321, .T. ) ;
|
||||
#86 = FACE_OUTER_BOUND ( 'NONE', #445, .T. ) ;
|
||||
#87 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -3.500000000000000000 ) ) ;
|
||||
#88 = CC_DESIGN_APPROVAL ( #99, ( #139 ) ) ;
|
||||
#89 = FACE_BOUND ( 'NONE', #327, .T. ) ;
|
||||
#90 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#91 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#92 = FACE_OUTER_BOUND ( 'NONE', #273, .T. ) ;
|
||||
#93 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
|
||||
#94 = FACE_OUTER_BOUND ( 'NONE', #446, .T. ) ;
|
||||
#95 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#96 = FACE_OUTER_BOUND ( 'NONE', #341, .T. ) ;
|
||||
#97 = VECTOR ( 'NONE', #203, 1000.000000000000000 ) ;
|
||||
#98 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#99 = APPROVAL ( #357, 'UNSPECIFIED' ) ;
|
||||
#100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#101 = VERTEX_POINT ( 'NONE', #22 ) ;
|
||||
#102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#103 = VERTEX_POINT ( 'NONE', #270 ) ;
|
||||
#104 = FACE_OUTER_BOUND ( 'NONE', #206, .T. ) ;
|
||||
#105 = CYLINDRICAL_SURFACE ( 'NONE', #388, 5.000000000000000000 ) ;
|
||||
#106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#107 = DIRECTION ( 'NONE', ( 2.602085213965210600E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#108 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #57, #127, ( #139 ) ) ;
|
||||
#109 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#111 = FACE_OUTER_BOUND ( 'NONE', #418, .T. ) ;
|
||||
#112 = VECTOR ( 'NONE', #277, 1000.000000000000000 ) ;
|
||||
#113 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#114 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#115 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #451 ) ;
|
||||
#116 = SHAPE_DEFINITION_REPRESENTATION ( #269, #119 ) ;
|
||||
#117 = LINE ( 'NONE', #148, #35 ) ;
|
||||
#118 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, 2.500000000000000000, -0.9999999999999997800 ) ) ;
|
||||
#119 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Spring_Cap', ( #115, #349 ), #355 ) ;
|
||||
#120 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#121 = FACE_OUTER_BOUND ( 'NONE', #363, .T. ) ;
|
||||
#122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#123 = LINE ( 'NONE', #90, #356 ) ;
|
||||
#124 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#125 = LINE ( 'NONE', #144, #268 ) ;
|
||||
#126 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
|
||||
#127 = DATE_TIME_ROLE ( 'classification_date' ) ;
|
||||
#128 = VECTOR ( 'NONE', #246, 1000.000000000000000 ) ;
|
||||
#129 = CIRCLE ( 'NONE', #402, 5.000000000000000000 ) ;
|
||||
#130 = CIRCLE ( 'NONE', #404, 2.500000000000001300 ) ;
|
||||
#131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#132 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #50, #310, ( #139 ) ) ;
|
||||
#133 = VECTOR ( 'NONE', #247, 1000.000000000000000 ) ;
|
||||
#134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#135 = DATE_AND_TIME ( #216, #208 ) ;
|
||||
#136 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#137 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#138 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#139 = SECURITY_CLASSIFICATION ( '', '', #93 ) ;
|
||||
#140 = DATE_AND_TIME ( #220, #435 ) ;
|
||||
#141 = CIRCLE ( 'NONE', #401, 2.500000000000000000 ) ;
|
||||
#142 = PLANE ( 'NONE', #373 ) ;
|
||||
#143 = LINE ( 'NONE', #21, #128 ) ;
|
||||
#144 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#145 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#146 = VECTOR ( 'NONE', #156, 1000.000000000000000 ) ;
|
||||
#147 = APPROVAL_DATE_TIME ( #397, #304 ) ;
|
||||
#148 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -3.500000000000000000 ) ) ;
|
||||
#149 = EDGE_CURVE ( 'NONE', #55, #329, #154, .T. ) ;
|
||||
#150 = PERSON_AND_ORGANIZATION ( #176, #195 ) ;
|
||||
#151 = LINE ( 'NONE', #449, #133 ) ;
|
||||
#152 = VECTOR ( 'NONE', #14, 1000.000000000000000 ) ;
|
||||
#153 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#154 = CIRCLE ( 'NONE', #405, 5.000000000000000900 ) ;
|
||||
#155 = VECTOR ( 'NONE', #300, 1000.000000000000000 ) ;
|
||||
#156 = DIRECTION ( 'NONE', ( -2.602085213965210600E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#157 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #352 ) ;
|
||||
#158 = APPROVAL_ROLE ( '' ) ;
|
||||
#159 = LINE ( 'NONE', #326, #155 ) ;
|
||||
#160 = LINE ( 'NONE', #239, #146 ) ;
|
||||
#161 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#162 = ORIENTED_EDGE ( 'NONE', *, *, #81, .T. ) ;
|
||||
#163 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ;
|
||||
#164 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#165 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#167 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#168 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000001800, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#169 = ORIENTED_EDGE ( 'NONE', *, *, #422, .T. ) ;
|
||||
#170 = ORIENTED_EDGE ( 'NONE', *, *, #406, .F. ) ;
|
||||
#171 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 2.602085213965210600E-015 ) ) ;
|
||||
#172 = PLANE ( 'NONE', #395 ) ;
|
||||
#173 = DIRECTION ( 'NONE', ( -2.602085213965210600E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#174 = ORIENTED_EDGE ( 'NONE', *, *, #411, .F. ) ;
|
||||
#175 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#176 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ;
|
||||
#177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#178 = VERTEX_POINT ( 'NONE', #215 ) ;
|
||||
#179 = ORIENTED_EDGE ( 'NONE', *, *, #413, .F. ) ;
|
||||
#180 = ORIENTED_EDGE ( 'NONE', *, *, #419, .T. ) ;
|
||||
#181 = CIRCLE ( 'NONE', #358, 5.000000000000000000 ) ;
|
||||
#182 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ;
|
||||
#183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#184 = ORIENTED_EDGE ( 'NONE', *, *, #415, .F. ) ;
|
||||
#185 = ORIENTED_EDGE ( 'NONE', *, *, #416, .T. ) ;
|
||||
#186 = APPROVAL_ROLE ( '' ) ;
|
||||
#187 = ORIENTED_EDGE ( 'NONE', *, *, #415, .T. ) ;
|
||||
#188 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #381, #274, ( #331 ) ) ;
|
||||
#189 = ORIENTED_EDGE ( 'NONE', *, *, #421, .T. ) ;
|
||||
#190 = LINE ( 'NONE', #425, #261 ) ;
|
||||
#191 = PRODUCT ( 'Trigger_Spring_Cap', 'Trigger_Spring_Cap', '', ( #309 ) ) ;
|
||||
#192 = EDGE_CURVE ( 'NONE', #437, #389, #130, .T. ) ;
|
||||
#193 = ORIENTED_EDGE ( 'NONE', *, *, #433, .T. ) ;
|
||||
#194 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#195 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ;
|
||||
#196 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#197 = DIRECTION ( 'NONE', ( -2.602085213965210600E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#198 = DATE_AND_TIME ( #299, #225 ) ;
|
||||
#199 = ORIENTED_EDGE ( 'NONE', *, *, #413, .T. ) ;
|
||||
#200 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#201 = EDGE_CURVE ( 'NONE', #329, #407, #143, .T. ) ;
|
||||
#202 = ORIENTED_EDGE ( 'NONE', *, *, #423, .T. ) ;
|
||||
#203 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#204 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#205 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998200, 2.500000000000000000, -0.9999999999999997800 ) ) ;
|
||||
#206 = EDGE_LOOP ( 'NONE', ( #162, #6, #376, #187 ) ) ;
|
||||
#207 = ORIENTED_EDGE ( 'NONE', *, *, #424, .F. ) ;
|
||||
#208 = LOCAL_TIME ( 15, 7, 58.00000000000000000, #124 ) ;
|
||||
#209 = VERTEX_POINT ( 'NONE', #344 ) ;
|
||||
#210 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #428, #58, ( #331 ) ) ;
|
||||
#211 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ;
|
||||
#212 = ORIENTED_EDGE ( 'NONE', *, *, #369, .F. ) ;
|
||||
#213 = EDGE_CURVE ( 'NONE', #407, #325, #129, .T. ) ;
|
||||
#214 = ORIENTED_EDGE ( 'NONE', *, *, #368, .F. ) ;
|
||||
#215 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#216 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#217 = PERSON_AND_ORGANIZATION ( #176, #195 ) ;
|
||||
#218 = EDGE_CURVE ( 'NONE', #354, #209, #141, .T. ) ;
|
||||
#219 = DATE_TIME_ROLE ( 'creation_date' ) ;
|
||||
#220 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#221 = ORIENTED_EDGE ( 'NONE', *, *, #422, .F. ) ;
|
||||
#222 = ORIENTED_EDGE ( 'NONE', *, *, #149, .F. ) ;
|
||||
#223 = ORIENTED_EDGE ( 'NONE', *, *, #81, .F. ) ;
|
||||
#224 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ;
|
||||
#225 = LOCAL_TIME ( 15, 7, 58.00000000000000000, #284 ) ;
|
||||
#226 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.734723475976807100E-015 ) ) ;
|
||||
#227 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#230 = APPROVAL_PERSON_ORGANIZATION ( #150, #99, #158 ) ;
|
||||
#231 = VERTEX_POINT ( 'NONE', #168 ) ;
|
||||
#232 = PLANE ( 'NONE', #379 ) ;
|
||||
#233 = ORIENTED_EDGE ( 'NONE', *, *, #213, .F. ) ;
|
||||
#234 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, 2.500000000000000000, -0.9999999999999997800 ) ) ;
|
||||
#235 = ORIENTED_EDGE ( 'NONE', *, *, #201, .F. ) ;
|
||||
#236 = ORIENTED_EDGE ( 'NONE', *, *, #192, .T. ) ;
|
||||
#237 = ORIENTED_EDGE ( 'NONE', *, *, #38, .T. ) ;
|
||||
#238 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#239 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#240 = ORIENTED_EDGE ( 'NONE', *, *, #406, .T. ) ;
|
||||
#241 = ORIENTED_EDGE ( 'NONE', *, *, #218, .T. ) ;
|
||||
#242 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#243 = ORIENTED_EDGE ( 'NONE', *, *, #8, .T. ) ;
|
||||
#244 = ORIENTED_EDGE ( 'NONE', *, *, #149, .T. ) ;
|
||||
#245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#246 = DIRECTION ( 'NONE', ( -2.602085213965210600E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#247 = DIRECTION ( 'NONE', ( 1.734723475976807100E-015, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#248 = APPROVAL_ROLE ( '' ) ;
|
||||
#249 = ORIENTED_EDGE ( 'NONE', *, *, #264, .F. ) ;
|
||||
#250 = ORIENTED_EDGE ( 'NONE', *, *, #416, .F. ) ;
|
||||
#251 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#252 = ORIENTED_EDGE ( 'NONE', *, *, #384, .T. ) ;
|
||||
#253 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#255 = PLANE ( 'NONE', #386 ) ;
|
||||
#256 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -6.000000000000000000 ) ) ;
|
||||
#257 = ORIENTED_EDGE ( 'NONE', *, *, #201, .T. ) ;
|
||||
#258 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#259 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#260 = ORIENTED_EDGE ( 'NONE', *, *, #192, .F. ) ;
|
||||
#261 = VECTOR ( 'NONE', #1, 1000.000000000000000 ) ;
|
||||
#262 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998200, 2.500000000000000000, -0.9999999999999997800 ) ) ;
|
||||
#263 = ORIENTED_EDGE ( 'NONE', *, *, #378, .F. ) ;
|
||||
#264 = EDGE_CURVE ( 'NONE', #399, #329, #123, .T. ) ;
|
||||
#265 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ;
|
||||
#266 = CYLINDRICAL_SURFACE ( 'NONE', #387, 5.000000000000000000 ) ;
|
||||
#267 = ORIENTED_EDGE ( 'NONE', *, *, #431, .T. ) ;
|
||||
#268 = VECTOR ( 'NONE', #173, 1000.000000000000000 ) ;
|
||||
#269 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #346 ) ;
|
||||
#270 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -3.500000000000000000 ) ) ;
|
||||
#271 = ORIENTED_EDGE ( 'NONE', *, *, #38, .F. ) ;
|
||||
#272 = PERSON_AND_ORGANIZATION ( #176, #195 ) ;
|
||||
#273 = EDGE_LOOP ( 'NONE', ( #244, #249, #250, #252 ) ) ;
|
||||
#274 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
|
||||
#275 = LOCAL_TIME ( 15, 7, 58.00000000000000000, #353 ) ;
|
||||
#276 = ORIENTED_EDGE ( 'NONE', *, *, #433, .F. ) ;
|
||||
#277 = DIRECTION ( 'NONE', ( 1.734723475976807100E-015, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#278 = ORIENTED_EDGE ( 'NONE', *, *, #213, .T. ) ;
|
||||
#279 = ORIENTED_EDGE ( 'NONE', *, *, #29, .T. ) ;
|
||||
#280 = CC_DESIGN_APPROVAL ( #304, ( #331 ) ) ;
|
||||
#281 = PLANE ( 'NONE', #394 ) ;
|
||||
#282 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#283 = ORIENTED_EDGE ( 'NONE', *, *, #431, .F. ) ;
|
||||
#284 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#285 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#286 = ORIENTED_EDGE ( 'NONE', *, *, #424, .T. ) ;
|
||||
#287 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -6.000000000000000000 ) ) ;
|
||||
#288 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#289 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 2.602085213965210600E-015 ) ) ;
|
||||
#290 = ORIENTED_EDGE ( 'NONE', *, *, #411, .T. ) ;
|
||||
#291 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ;
|
||||
#292 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#293 = ORIENTED_EDGE ( 'NONE', *, *, #368, .T. ) ;
|
||||
#294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#297 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -6.000000000000000000 ) ) ;
|
||||
#298 = ORIENTED_EDGE ( 'NONE', *, *, #29, .F. ) ;
|
||||
#299 = CALENDAR_DATE ( 2013, 14, 11 ) ;
|
||||
#300 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#301 = APPROVAL_DATE_TIME ( #140, #99 ) ;
|
||||
#302 = ORIENTED_EDGE ( 'NONE', *, *, #421, .F. ) ;
|
||||
#303 = ORIENTED_EDGE ( 'NONE', *, *, #264, .T. ) ;
|
||||
#304 = APPROVAL ( #26, 'UNSPECIFIED' ) ;
|
||||
#305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#306 = ORIENTED_EDGE ( 'NONE', *, *, #419, .F. ) ;
|
||||
#307 = ORIENTED_EDGE ( 'NONE', *, *, #432, .T. ) ;
|
||||
#308 = ORIENTED_EDGE ( 'NONE', *, *, #218, .F. ) ;
|
||||
#309 = MECHANICAL_CONTEXT ( 'NONE', #34, 'mechanical' ) ;
|
||||
#310 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
|
||||
#311 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#312 = ORIENTED_EDGE ( 'NONE', *, *, #8, .F. ) ;
|
||||
#313 = ORIENTED_EDGE ( 'NONE', *, *, #432, .F. ) ;
|
||||
#314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#315 = ORIENTED_EDGE ( 'NONE', *, *, #369, .T. ) ;
|
||||
#316 = ORIENTED_EDGE ( 'NONE', *, *, #378, .T. ) ;
|
||||
#317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#321 = EDGE_LOOP ( 'NONE', ( #257, #298, #302, #303 ) ) ;
|
||||
#322 = VERTEX_POINT ( 'NONE', #256 ) ;
|
||||
#323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#324 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#325 = VERTEX_POINT ( 'NONE', #287 ) ;
|
||||
#326 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#327 = EDGE_LOOP ( 'NONE', ( #207, #211, #212, #214, #221 ) ) ;
|
||||
#328 = ADVANCED_FACE ( 'NONE', ( #111 ), #77, .T. ) ;
|
||||
#329 = VERTEX_POINT ( 'NONE', #447 ) ;
|
||||
#330 = ADVANCED_FACE ( 'NONE', ( #94, #16 ), #172, .F. ) ;
|
||||
#331 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #191, .NOT_KNOWN. ) ;
|
||||
#332 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #198, #219, ( #346 ) ) ;
|
||||
#333 = ADVANCED_FACE ( 'NONE', ( #96, #89 ), #281, .T. ) ;
|
||||
#334 = ADVANCED_FACE ( 'NONE', ( #92 ), #83, .T. ) ;
|
||||
#335 = ADVANCED_FACE ( 'NONE', ( #86 ), #105, .T. ) ;
|
||||
#336 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #408, #450, ( #346 ) ) ;
|
||||
#337 = ADVANCED_FACE ( 'NONE', ( #121 ), #266, .T. ) ;
|
||||
#338 = CC_DESIGN_APPROVAL ( #340, ( #346 ) ) ;
|
||||
#339 = ADVANCED_FACE ( 'NONE', ( #104 ), #255, .F. ) ;
|
||||
#340 = APPROVAL ( #412, 'UNSPECIFIED' ) ;
|
||||
#341 = EDGE_LOOP ( 'NONE', ( #185, #189, #193, #199, #202 ) ) ;
|
||||
#342 = ADVANCED_FACE ( 'NONE', ( #82 ), #67, .F. ) ;
|
||||
#343 = EDGE_LOOP ( 'NONE', ( #271, #283, #286, #290 ) ) ;
|
||||
#344 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#345 = ADVANCED_FACE ( 'NONE', ( #75 ), #64, .F. ) ;
|
||||
#346 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #331, #439 ) ;
|
||||
#347 = ADVANCED_FACE ( 'NONE', ( #85 ), #232, .F. ) ;
|
||||
#348 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #272, #126, ( #191 ) ) ;
|
||||
#349 = AXIS2_PLACEMENT_3D ( 'NONE', #68, #254, #91 ) ;
|
||||
#350 = ADVANCED_FACE ( 'NONE', ( #74 ), #142, .T. ) ;
|
||||
#351 = ADVANCED_FACE ( 'NONE', ( #374 ), #52, .F. ) ;
|
||||
#352 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
|
||||
#353 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ;
|
||||
#354 = VERTEX_POINT ( 'NONE', #87 ) ;
|
||||
#355 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #53 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #440, #165, #430 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#356 = VECTOR ( 'NONE', #434, 1000.000000000000000 ) ;
|
||||
#357 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#358 = AXIS2_PLACEMENT_3D ( 'NONE', #282, #100, #318 ) ;
|
||||
#359 = AXIS2_PLACEMENT_3D ( 'NONE', #259, #79, #295 ) ;
|
||||
#360 = AXIS2_PLACEMENT_3D ( 'NONE', #78, #294, #110 ) ;
|
||||
#361 = AXIS2_PLACEMENT_3D ( 'NONE', #95, #314, #131 ) ;
|
||||
#362 = AXIS2_PLACEMENT_3D ( 'NONE', #288, #106, #320 ) ;
|
||||
#363 = EDGE_LOOP ( 'NONE', ( #306, #276, #279, #278 ) ) ;
|
||||
#364 = AXIS2_PLACEMENT_3D ( 'NONE', #5, #229, #36 ) ;
|
||||
#365 = EDGE_LOOP ( 'NONE', ( #260, #263, #265, #267 ) ) ;
|
||||
#366 = AXIS2_PLACEMENT_3D ( 'NONE', #242, #17, #49 ) ;
|
||||
#367 = AXIS2_PLACEMENT_3D ( 'NONE', #80, #296, #113 ) ;
|
||||
#368 = EDGE_CURVE ( 'NONE', #103, #178, #62, .T. ) ;
|
||||
#369 = EDGE_CURVE ( 'NONE', #178, #372, #65, .T. ) ;
|
||||
#370 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#371 = DIRECTION ( 'NONE', ( 2.602085213965210600E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#372 = VERTEX_POINT ( 'NONE', #145 ) ;
|
||||
#373 = AXIS2_PLACEMENT_3D ( 'NONE', #37, #171, #371 ) ;
|
||||
#374 = FACE_OUTER_BOUND ( 'NONE', #400, .T. ) ;
|
||||
#375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#376 = ORIENTED_EDGE ( 'NONE', *, *, #423, .F. ) ;
|
||||
#377 = AXIS2_PLACEMENT_3D ( 'NONE', #391, #177, #204 ) ;
|
||||
#378 = EDGE_CURVE ( 'NONE', #372, #437, #44, .T. ) ;
|
||||
#379 = AXIS2_PLACEMENT_3D ( 'NONE', #76, #289, #107 ) ;
|
||||
#380 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #138, #438 ) ;
|
||||
#381 = PERSON_AND_ORGANIZATION ( #176, #195 ) ;
|
||||
#382 = VERTEX_POINT ( 'NONE', #205 ) ;
|
||||
#383 = AXIS2_PLACEMENT_3D ( 'NONE', #285, #69, #102 ) ;
|
||||
#384 = EDGE_CURVE ( 'NONE', #442, #55, #61, .T. ) ;
|
||||
#385 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#386 = AXIS2_PLACEMENT_3D ( 'NONE', #3, #226, #31 ) ;
|
||||
#387 = AXIS2_PLACEMENT_3D ( 'NONE', #227, #194, #319 ) ;
|
||||
#388 = AXIS2_PLACEMENT_3D ( 'NONE', #137, #370, #166 ) ;
|
||||
#389 = VERTEX_POINT ( 'NONE', #258 ) ;
|
||||
#390 = AXIS2_PLACEMENT_3D ( 'NONE', #429, #164, #66 ) ;
|
||||
#391 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#392 = PERSON_AND_ORGANIZATION ( #176, #195 ) ;
|
||||
#393 = VECTOR ( 'NONE', #43, 1000.000000000000000 ) ;
|
||||
#394 = AXIS2_PLACEMENT_3D ( 'NONE', #98, #317, #134 ) ;
|
||||
#395 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #9, #70 ) ;
|
||||
#396 = AXIS2_PLACEMENT_3D ( 'NONE', #292, #109, #323 ) ;
|
||||
#397 = DATE_AND_TIME ( #120, #275 ) ;
|
||||
#398 = EDGE_LOOP ( 'NONE', ( #291, #293, #307, #308 ) ) ;
|
||||
#399 = VERTEX_POINT ( 'NONE', #238 ) ;
|
||||
#400 = EDGE_LOOP ( 'NONE', ( #169, #163, #170, #174 ) ) ;
|
||||
#401 = AXIS2_PLACEMENT_3D ( 'NONE', #196, #4, #228 ) ;
|
||||
#402 = AXIS2_PLACEMENT_3D ( 'NONE', #20, #245, #375 ) ;
|
||||
#403 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#404 = AXIS2_PLACEMENT_3D ( 'NONE', #54, #305, #122 ) ;
|
||||
#405 = AXIS2_PLACEMENT_3D ( 'NONE', #403, #183, #448 ) ;
|
||||
#406 = EDGE_CURVE ( 'NONE', #409, #354, #47, .T. ) ;
|
||||
#407 = VERTEX_POINT ( 'NONE', #441 ) ;
|
||||
#408 = PERSON_AND_ORGANIZATION ( #176, #195 ) ;
|
||||
#409 = VERTEX_POINT ( 'NONE', #11 ) ;
|
||||
#410 = EDGE_CURVE ( 'NONE', #103, #354, #117, .T. ) ;
|
||||
#411 = EDGE_CURVE ( 'NONE', #382, #409, #25, .T. ) ;
|
||||
#412 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
|
||||
#413 = EDGE_CURVE ( 'NONE', #322, #231, #63, .T. ) ;
|
||||
#414 = EDGE_CURVE ( 'NONE', #325, #101, #32, .T. ) ;
|
||||
#415 = EDGE_CURVE ( 'NONE', #231, #101, #40, .T. ) ;
|
||||
#416 = EDGE_CURVE ( 'NONE', #442, #399, #24, .T. ) ;
|
||||
#417 = EDGE_LOOP ( 'NONE', ( #236, #237, #240, #241, #243 ) ) ;
|
||||
#418 = EDGE_LOOP ( 'NONE', ( #312, #313, #315, #316 ) ) ;
|
||||
#419 = EDGE_CURVE ( 'NONE', #322, #325, #19, .T. ) ;
|
||||
#420 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#421 = EDGE_CURVE ( 'NONE', #399, #426, #18, .T. ) ;
|
||||
#422 = EDGE_CURVE ( 'NONE', #382, #103, #13, .T. ) ;
|
||||
#423 = EDGE_CURVE ( 'NONE', #231, #442, #7, .T. ) ;
|
||||
#424 = EDGE_CURVE ( 'NONE', #436, #382, #125, .T. ) ;
|
||||
#425 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, -1.000000000000000000 ) ) ;
|
||||
#426 = VERTEX_POINT ( 'NONE', #234 ) ;
|
||||
#427 = EDGE_CURVE ( 'NONE', #372, #436, #28, .T. ) ;
|
||||
#428 = PERSON_AND_ORGANIZATION ( #176, #195 ) ;
|
||||
#429 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#430 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#431 = EDGE_CURVE ( 'NONE', #436, #389, #27, .T. ) ;
|
||||
#432 = EDGE_CURVE ( 'NONE', #178, #209, #190, .T. ) ;
|
||||
#433 = EDGE_CURVE ( 'NONE', #426, #322, #181, .T. ) ;
|
||||
#434 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#435 = LOCAL_TIME ( 15, 7, 58.00000000000000000, #311 ) ;
|
||||
#436 = VERTEX_POINT ( 'NONE', #253 ) ;
|
||||
#437 = VERTEX_POINT ( 'NONE', #30 ) ;
|
||||
#438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#439 = DESIGN_CONTEXT ( 'detailed design', #352, 'design' ) ;
|
||||
#440 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#441 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, 0.0000000000000000000, -0.9999999999999997800 ) ) ;
|
||||
#442 = VERTEX_POINT ( 'NONE', #136 ) ;
|
||||
#443 = LINE ( 'NONE', #118, #152 ) ;
|
||||
#444 = LOCAL_TIME ( 15, 7, 58.00000000000000000, #60 ) ;
|
||||
#445 = EDGE_LOOP ( 'NONE', ( #179, #180, #182, #184 ) ) ;
|
||||
#446 = EDGE_LOOP ( 'NONE', ( #222, #223, #224, #233, #235 ) ) ;
|
||||
#447 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#449 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#450 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
|
||||
#451 = CLOSED_SHELL ( 'NONE', ( #351, #335, #333, #330, #334, #347, #337, #339, #342, #350, #345, #328 ) ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Loading…
Reference in New Issue