To be consistent with all previous bug messages being translatable.
Also only mark the bug as a warning instead of an error because the bug
doesn't cause any disk drive operations to fail.
Bug 790842 - Report libparted messages into operation details at the
point at which they occur
An action file is always needed with polkit to describe the privileged
actions that are available to the subject (client program). For GParted
the only available action is to run the gparted shell script as root.
Note that the polkit action file will be installed into location
$(prefix)/share/polkit-1/actions. This is required by the GNU Coding
Standards [1] and to prevent 'make distcheck' from failing [2]. However
polkit only uses /usr/share/polkit-1/actions for it's action files [3].
This dilemma was discussed in this Bugzilla bug 776437 and on the
general Automake discussion email list [4]. The solution is to simply
document in the README file that a manual additional installation step
may be required.
The action file is marked as translatable with the underscore (_) of the
_description and _message tags identifying the string to be translated.
Use of INTLTOOL_POLICY_RULE in Makefile.am to merge translations into
the polkit action file necessitates increasing the minimum version of
intltool to 0.36.0 where it was first introduced in intltool.m4. This
will prevent GParted building on RedHat/CentOS 5 which only has intltool
0.35.0. But that doesn't matter because RedHat/CentOS 5 reached end of
life on 31st March 2017.
[1] GNU Coding Standards, 7.2.5 Variables for Installation Directories
https://www.gnu.org/prep/standards/standards.html#Directory-Variables
[2] Automake Manual, 27.10 Installing to Hard-Coded Locations
https://www.gnu.org/software/automake/manual/automake.html#Hard_002dCoded-Install-Paths
"My package needs to populate the installation directory of another
package at install-time. I can easily compute that installation
directory in configure, but if I install files therein,
'make distcheck' fails. How else should I do?"
[3] polkit(8), Declaring Actions
https://www.freedesktop.org/software/polkit/docs/latest/polkit.8.html#polkit-declaring-actions
"A mechanism need to declare a set of actions in order to use
polkit. Actions correspond to operations that clients can request
the mechanism to carry out and are defined in XML files that the
mechanism installs into the /usr/share/polkit-1/actions directory."
[4] Not installing to hard-coded locations vs polkit's fixed location
http://lists.gnu.org/archive/html/automake/2017-08/msg00015.html
Bug 776437 - GParted fails to run as root under Wayland
Add support for detecting UDF file systems and formatting hard disks
with revision 2.01 UDF file systems using udftools. Formatting optical
disks or any other media types is not supported yet. Changing label or
UUID after formatting is not supported as the tools do not yet exist.
Bug 784533 - Add support for UDF file system
As the source code is managed in GIT and there is a .gitignore file in
the top level directory specifying file names to exclude from version
control, then the old per-directory .cvsignore files for CVS are
redundant.
Add the only missing and applicable entry from src/.cvsignore of '.libs'
to .gitignore and remove all the .cvsignore files.
Running 'make check' is failing, reporting that 2 of the Google Test
files need to be translated.
$ make check
...
Making check in po
make[1]: Entering directory `/home/centos/programming/c/gparted/po'
rm -f missing notexist
srcdir=. /usr/bin/intltool-update -m
The following files contain translations and are currently not in use. Please
consider adding these to the POTFILES.in file, located in the po/ directory.
lib/gtest/include/gtest/internal/gtest-filepath.h
lib/gtest/src/gtest.cc
If some of these files are left out on purpose then please add them to
POTFILES.skip instead of POTFILES.in. A file 'missing' containing this list
of left out files has been written in the current directory.
Please report to https://bugzilla.gnome.org/enter_bug.cgi?product=gparted
if [ -r missing -o -r notexist ]; then \
exit 1; \
fi
make[1]: *** [check] Error 1
make[1]: Leaving directory `/home/centos/programming/c/gparted/po'
make: *** [check-recursive] Error 1
'make check' is failing
This is not true, the files do not contain translatable strings. This
is a match for known intltool bug:
False positives from intltool-update -m
https://bugs.launchpad.net/intltool/+bug/545862
Fix by adding the problem file names into POTFILES.skip.
Bug 781978 - Add Google Test C++ test framework
The command 'make distcheck' runs a build in dist directory subdirs
and then runs intltool -m which in turn complains about translations
in a built file:
The following files contain translations and are currently not in
use. Please consider adding these to the POTFILES.in file, located
in the po/ directory.
sub/gparted.desktop.in
See also upstream intltool issue bug report:
intltool confused by separate build-dir
https://bugs.launchpad.net/intltool/+bug/1117944
Bug 778628 - Work around automake-1.15 & intltool complaining about
translations in build dir
Files were named Block_Copy and the class was named block_copy. Change
to the primary naming convention of CamelCase class name and matching
file names.
Also make CopyBlocks::copy_block() a private method as it is only used
internally within the class.
Bug 775932 - Refactor mostly applying of operations
The GParted_Core::mount_info and GParted_Core::fstab_info maps and the
methods that manipulate them are self-contained. Therefore move them to
a separate Mount_Info module and reduce the size of the monster
GParted_Core slightly.
In some cases creating an LVM2 Physical Volume on top of a DMRaid array
reports no usage information and this partition warning:
Unable to read the contents of this file system!
Because of this some operations may be unavailable.
The cause might be a missing software package.
The following list of software packages is required for lvm2
pv file system support: lvm2.
For example on Ubuntu 14.04 LTS (with GParted built with
--enable-libparted-dmraid) create an LVM2 PV in a DMRaid array
partition. GParted uses this command:
# lvm pvcreate -M 2 /dev/mapper/isw_bacdehijbd_MyArray0p2
But LVM reports the PV having a different name:
# lvm pvs
PV VG Fmt Attr PSize PFree
/dev/disk/by-id/dm-name-isw_bacdehijbd_MyArray0p2 lvm2 a-- 1.00g 1.00g
This alternate name is loaded into the LVM2_PV_Info module cache. Hence
when GParted queries partition /dev/mapper/isw_bacdehijbd_MyArray0p2 it
has no PV information against that name and reports unknown usage.
However they are actually the same block special device; major 252,
minor 2:
# ls -l /dev/mapper/isw_bacdehijbd_MyArray0p2
brw-rw---- 1 root disk 252, 2 Jul 2 11:09 /dev/mapper/isw_bacdehijbd_MyArray0p2
# ls -l /dev/disk/by-id/dm-name-isw_bacdehijbd_MyArray0p2
lrwxrwxrwx 1 root root 10 Jul 2 11:09 /dev/disk/by-id/dm-name-isw_bacdehijbd_MyArray0p2 -> ../../dm-2
# ls -l /dev/dm-2
brw-rw---- 1 root disk 252, 2 Jul 2 11:09 /dev/dm-2
To determine if two names refer to the same block special device their
major, minor numbers need to be compared, instead of string comparing
their names.
Implement class BlockSpecial which encapsulates the name and major,
minor numbers for a block special device. Also performs comparison as
needed. See bug 767842 comments 4 and 5 for further investigation and
decision for choosing to implement a class.
Replace name strings in the LVM2_PV_Info module with BlockSpecial
objects performing correct block special device comparison.
Bug 767842 - File system usage missing when tools report alternate block
device names
Piotr Drąg