This case is an extension of the setup in the previous commit. Add a
second partition several megabytes after the first. It looks like this:
[TABLE][PTN#1] [PTN#2]
<-- 1st MiB -><- several MiBs ->
Just need to make the gap 2 MiB or more so that it can be seen what the
resize/move dialog is allowing. Setup like this using an 8 MiB gap and
8 MiB partition #2.
For MSDOS use:
dd if=/dev/zero bs=1M of=/dev/sdb
(echo 1,2047; echo 18432,16384) | sfdisk -uS --force /dev/sdb
mkswap /dev/sdb2
For GPT use:
sgdisk --zap-all /dev/sdb
sgdisk --set-alignment=1 --new 1:34:2047 /dev/sdb
sgdisk --new 2:18432:34815 /dev/sdb
mkswap /dev/sdb2
In GParted try to move partition sdb2 to the left as much as possible,
or try to resize the start to the left as much as possible. GParted
insists on having a 1 MiB of padding before the start of sdb2, forcing
it to start at sector 4096, even though sector 2048 is free and aligns
to whole megabytes.
Delete the preceding partition. Now GParted allows sdb2 to be moved or
resize to start at sector 2048.
Fix another off by one error in the sector comparison for the
resizing/moving of partitions.
Closes#172 - GParted doesn't allow creation of a partition starting at
sector 2048 if there is a partition before it
[This commit message and test case is written assuming a drive with a
(logical) sector size of 512 bytes. GParted equally well works with
other sector sizes because the limit is expressed as 1 MiB / sector
size. Adjust the test case sector counts as needed when testing with
different sector sized drives.]
Prepare an MSDOS or GPT partitioned disk with the first partition within
the first 1 MiB.
For MSDOS use:
dd if=/dev/zero bs=1M of=/dev/sdb
echo 1,2047 | sfdisk -uS --force /dev/sdb
For GPT use:
sgdisk --zap-all /dev/sdb
sgdisk --set-alignment=1 --new 1:34:2047 /dev/sdb
In GParted create a new partition on /dev/sdb as near to the start of
the drive as possible. GParted insists on added an extra 1 MiB of space
before the new partition, making it start at sector 4096, even though
sector 2048 is free and aligns to whole megabytes.
Delete the preceding partition. Now GParted allows the new partition
to be created starting at sector 2048.
GParted only needs to add padding of 1 MiB to account for the partition
table at the start of the drive when the possible start is within the
first MiB, not already at the first MiB. Fix this off by one error in
the sector comparison.
The reason this has bug has never occurred before is because it is very
unusual to have the first partition entirely within the first 1 MiB.
Normally either the (start of) the drive is free so GParted creates an
unallocated partition object starting at sector 0, so adding 1 MiB of
padding to preserve the partition table is correct; or the first
partition starts at 1 MiB so the possible start for a second partition
is much later in the drive.
Closes#172 - GParted doesn't allow creation of a partition starting at
sector 2048 if there is a partition before it
Accessibility relations are essential for usage with screen readers. It
enables the screen reader to read the corresponding label along with the
value of a widget when it gains focus, rather than just the value of the
widget itself.
Test by running Orca screen reader and tab around the elements of the UI
and listen to what is read out. For example before it would be
"500 GiB", where as after it would be "Unused 500 GiB".
Closes!92 - Add accessibility relations
A user reported that scrolling the mouse wheel quickly crashes GParted
[1]. The minimum setup required to reproduce this crash is 3 drives
partitioned like this:
sda - any
sdb - some unallocated space
sdc - no unallocated space
Then move the pointer over the drive selection combobox and scroll the
mouse wheel quickly downwards.
The sequence of events goes like this:
1. The first scroll wheel down event causes the device combobox
selection to change to the second entry (sdb), which calls
combo_devices_changed() -> Refresh_Visual().
2. Refresh_Visual() sets selected_partition_ptr to point to the largest
unallocated space partition object in sdb.
3. The first Gtk event processing loop in Refresh_Visual() comes
across the next scroll wheel down event. This changes the selection
to the third entry (sdc), which makes a recursive call to
combo_devices_changed() -> Refresh_Visual().
4. Refresh_Visual() sets selected_partition_ptr to NULL as sdc has no
unallocated space and returns.
5. The first call to Refresh_Visual() resumes after the first Gtk event
loop, continuing the processing for drive sdb. As sdb has a
largest unallocated space partition (largest_unalloc_size >= 0),
DrawingAreaVisualDisk::set_selected() is called with the now
NULL selected_partition_ptr.
6. One of the DrawingAreaVisualDisk::set_selected() methods
dereferences the NULL pointer, crashing GParted.
As a comment says of selected_partition_ptr "Lifetime: Valid until the
next call to Refresh_Visual()." It just wasn't expected that the next
call to Refresh_Visual() would be half way through Refresh_Visual()
itself.
Considered but rejected fixes:
1. Remove automatic selection of the largest unallocated space.
Removes functionality.
2. Return at the top of Refresh_Visual() when called recursively.
This causes GParted to not update the main window with the latest
selected drive. In the above example the combobox would show sdc,
but the main window graphic and partition list would have only been
updated once showing sdb, the first scrolled selection.
Fix by only having a single Gtk event processing loop at the end of
Refresh_Visual() with the optional calls to select the largest
unallocated partition before that loop. This makes it impossible to
call the ::set_selected() methods with selected_partition_ptr modified
by a recursive call.
This fix reverts this earlier commit:
0fb8cce699
Reduce flashing redraw from automatic partition selection (#696149)
That commit was in GParted 0.20.0 when Gtk 2 was still used. Re-testing
now doesn't see any flashing redrawing from the automatic partition
selection, with GParted currently using Gtk 3.
[1] Debian bug #991998 - gparted segfaults if scrolling quickly the
device dropdown list
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=991998Closes#165 - GParted segfaults if scrolling quickly in the device
dropdown
Compiling GParted on an older distribution with gtk+-3.0 < 3.22.0, where
HAVE_GTK_SHOW_URI_ON_WINDOW is undefined, produces this warning message:
Win_GParted.cc: In member function 'void GParted::Win_GParted::show_help(const Glib::ustring&, const Glib::ustring&)':
Win_GParted.cc:1822:56: warning: operation on 'gscreen' may be undefined [-Wsequence-point]
GdkScreen *gscreen = gscreen = gdk_screen_get_default();
^
Found on Ubuntu 16.04 LTS with gtk+ 3.18.0.
Stop double assigning to gscreen. Fixes commit:
26f4dc504a
Replace deprecated gtk_show_uri() method for help window (!82)
Creating a grep process to check if a particular mount is still mounted
is an unnecessary overhead. All that is needed is for the Mount_Info
module to refresh it's copy of /proc/mounts and query that.
To keep the code as simple as possible just reload the whole of the
Mount_Info module and query the mount cache to determine if the
particular block device is still mounted at this particular mount point.
This therefore re-reads /proc/mounts (necessary) and /proc/swaps and
/etc/fstab (unnecessary). This is still much less overhead than
creating a separate grep process.
Closes!89 - Fix unmount error when unmounting below a bind mount point
Bind mounts duplicate part of the file system hierarchy to an additional
mount point [1]. When mounting and unmounting a second file system
below a duplicating bind mount Linux automatically presents this lower
file system as being mounted multiple times. GParted displays these
multiple mount points. However using GParted to unmount this lower file
system reports an error that the second mount point is no longer
mounted, because all were unmounted by the first unmount command.
Setup:
1. Mount an upper file system
# mkdir /mnt/1
# mount /dev/sdb1 /mnt/1
# fgrep sdb /proc/mounts
/dev/sdb1 /mnt/1 ext4 rw,seclabel,relatime,data=ordered 0 0
2. Bind mount it to a second directory
# mkdir /mnt/b1
# mount --bind /mnt/1 /mnt/b1
# fgrep sdb /proc/mounts
/dev/sdb1 /mnt/1 ext4 rw,seclabel,relatime,data=ordered 0 0
/dev/sdb1 /mnt/b1 ext4 rw,seclabel,relatime,data=ordered 0 0
3. Mount a file system below the first
# mkdir /mnt/1/lower
# mount /dev/sdb2 /mnt/1/lower
# fgrep sdb /proc/mounts
/dev/sdb1 /mnt/1 ext4 rw,seclabel,relatime,data=ordered 0 0
/dev/sdb1 /mnt/b1 ext4 rw,seclabel,relatime,data=ordered 0 0
/dev/sdb2 /mnt/1/lower xfs rw,seclabel,relatime,attr2,inode64,noquota 0 0
/dev/sdb2 /mnt/b1/lower xfs rw,seclabel,relatime,attr2,inode64,noquota 0 0
Two mount records for sdb2 were added to /proc/mounts from one mount
command.
Then use GParted to unmount sdb2. It reports this error dialog:
+-------------------------------------+
| |
| Could not unmount /dev/sdb2 |
| |
| # umount -v '/mnt/b1/lower' |
| umount: /mnt/b1/lower: not mounted. |
+-------------------------------------+
| [ OK ] |
+-------------------------------------+
Fix by checking that the file system is still mounted before each
unmount attempt.
[1] mount (8), Description, Bind mount operation
https://man7.org/linux/man-pages/man8/mount.8.html#DESCRIPTIONCloses!89 - Fix unmount error when unmounting below a bind mount point
Extra hint of warning status being represented by enumeration constant
STATUS_N_A is no longer needed since commit:
8c5c13d613
Rename OperationDetailStatus STATUS_N_A to STATUS_WARNING
Implemented the second half of the solution described in the previous
commit. Resolve UUID= and LABEL= references when searching in the
Mount_Info cache so that mount points of encrypted file systems listed
in /etc/fstab can be found using the later added FS_Info details.
Closes#162 - It is no longer possible to mount a LUKS encrypted file
system
ISSUE DETAILS
GParted no longer enables Partition > Mount on, for unmounted encrypted
file systems listed in /etc/fstab.
Steps to reproduce:
1. Create LUKS mapping and open.
# cryptsetup luksFormat /dev/sdb1 -
# cryptsetup luksOpen /dev/sdb1 sdb1_crypt
2. Create any file system.
# mkfs.ext4 /dev/mapper/sdb1_crypt
# uuid=`blkid -o value -s UUID /dev/mapper/sdb1_crypt`
3. Add /etc/fstab entry.
# mkdir /mnt/1
# echo "UUID=$uuid /mnt/1 ext4 defaults 0 0" >> /etc/fstab
4. Run GParted and try Partition > Mount on.
With GParted >= 1.3 no mount point is available. With GParted <= 1.2
mount point /mnt/1 is available.
EXPLANATION
Up until GParted 1.2.0 it worked like this:
1. Ran blkid and loaded the details for every file system into the
FS_Info cache. This included results for file systems in open LUKS
mappings, such as /dev/mapper/sdb1_crypt in the above example.
2. Read /etc/fstab, resolved UUID= and LABEL= references into block
device names and added those into the Mount_Info cache.
3. Looped through all partitions adding mount points known by the
Mount_Info cache.
After the changes for issue #131 "GParted hangs when non-named device is
hung" and issue #148 "Encrypted file systems are no longer recognised"
it works like this instead:
1. Runs blkid for specified devices and partitions only and loads file
system details into the FS_Info cache. Does not include open LUKS
mappings so no results for those file systems.
2. Loading of /etc/fstab into the Mount_Info cache is unable to resolve
UUID= and LABEL= references for file systems in LUKS mappings, so
they aren't included.
3. No mount points known for encrypted file systems.
Note that currently when an encrypted file system is added into the data
model it extends the FS_Info cache <2>, but this is after the Mount_Info
cache has been loaded <1>. Call flow is like this:
GParted_Core::set_devices_thread()
FS_Info::clear_cache()
FS_Info::load_cache_for_paths()
1> Mount_Info::load_cache()
...
set_device_from_disk()
set_device_one_partition() / set_device_partitions()
set_luks_partition()
detect_filesystem_in_encryption_mapping()
2> FS_Info::load_cache_for_paths()
...
set_mountpoints()
partition.add_mountpoints(Mount_Info::get_fstab_mountpoints())
SOLUTION
Also save unresolved UUID= and LABEL= references from /etc/fstab into
the Mount_Info cache. Then when searching the Mount_Info /etc/fstab
cache resolve encountered UUID= and LABEL= references.
THIS COMMIT
Also save unresolved UUID= and LABEL= references into the Mount_Info
cache.
Closes#162 - It is no longer possible to mount a LUKS encrypted file
system
E2label works the same way whether an ext2/3/4 file system is mounted or
not, by directly reading and writing the superblock from the partition
block device. (Technically the superblock will already be in the kernel
device buffer cache because the kernel has the ext2/3/4 file system
mounted and a reference to the superblock in the device buffer cache).
This is safe and supported as confirmed here [1]. As this method has
always worked, even on the oldest distributions, unconditionally enable
this feature.
# mkfs.ext4 -L label_1 /dev/sdb3
# mount /dev/sdb3 /mnt/3
# e2label /dev/sdb3 label_2
# blkid /dev/sdb3
/dev/sdb3: LABEL="label_2" ...
[1] Is labelling a mounted ext2/3/4 file system safe and supported?
https://lore.kernel.org/linux-ext4/CAMU1PDgNvW_3Jr91iii-Nh=DCuRytVG8ka3-J+a43gKwigx8Yg@mail.gmail.com/T/#u
Bug 600496 - Allow changing ext2/3 label without unmounting
Closes#163 - Feature request: set label on a mounted btrfs
XFS also supports labelling of the file system while it is mounted.
This was added into Linux kernel 4.18 [1] and xfsprogs 4.17.0 [2].
These versions are newer than available in older but still supported
distributions so we'll need to detect versions before enabling support.
These are the oldest releases of distributions which meet the
requirements.
Distro EOL Linux kernel xfsprogs
Debian 10 2024-Jun 4.19.0 4.20.0
RHEL 8 2029-May 4.18.0 5.0.0
Ubuntu 20.04 LTS 2030-Apr 5.4 5.3.0
As with btrfs a mounted XFS is labelled via it's mount point:
# mkfs.xfs -L label_1 /dev/sdb2
# mount /dev/sdb2 /mnt/2
# xfs_io -c 'label -s mnt_label_2' /mnt/2
label = "mnt_label_2"
# blkid /dev/sdb2
/dev/sdb2: LABEL="mnt_label_2" ...
And cleared with:
# xfs_io -c 'label -c' /mnt/2
label = ""
Note that in some error situations xfs_io reports exit status zero and
writes the failure message to stdout.
# xfs_io -c 'label -s "mnt label 3"' /mnt/2
bad argument count 4 to label, expected between 0 and 3 arguments
# echo $?
0
Therefore determine success based on stdout starting with 'label = "'
reporting the new label or not.
Also note that as seen in this failure case, it is not possible to set
an XFS label which contains a space character using xfs_io. However
that is nothing new as that can't be done using the existing xfs_admin
command for an unmounted XFS either.
# umount /mnt/2
# xfs_admin -L 'umnt label 4' /dev/sdb2
Usage: xfs_admin [-efjlpuV] [-c 0|1] [-L label] [-U uuid] device
# echo $?
2
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f7664b31975bd893190708e76b2c424328f0c49b
xfs: implement online get/set fs label
[2] https://git.kernel.org/pub/scm/fs/xfs/xfsprogs-dev.git/commit/?id=cfa10b0f972005b38ed294bca66cebf2f65298ec
xfs_io: add label command
Closes#163 - Feature request: set label on a mounted btrfs
Show support for online labelling using a second tick mark in the
Features dialog. This matches how online grow and shrink are shown.
Closes#163 - Feature request: set label on a mounted btrfs
Btrfs supports labelling of the file system while it is mounted. This
was added into Linux kernel 3.10 [1] and btrfs-progs 3.12 [2]. As the
oldest supported distributions have the needed versions or newer,
unconditionally enable without any checking for availability.
Distro EOL Linux kernel btrfs-progs
Debian 9 2022-Jun 4.19 4.7.3
RHEL / CentOS 7 2024-Jun 3.10.0 4.9.1
Ubuntu 18.04 LTS 2023-Apr 4.15.0 4.15.1
Unmounted btrfs is labelled via the block device containing it, where as
a mounted btrfs is labelled via it's mount point.
# mkfs.btrfs -L initial_label /dev/sdb1
# blkid /dev/sdb1
/dev/sdb1: LABEL="initial_label" ...
# btrfs filesystem label /dev/sdb1 unmounted_label_2
# blkid /dev/sdb1
/dev/sdb1: LABEL="unmounted_label_2" ...
# mount /dev/sdb1 /mnt/1
# btrfs filesystem label /dev/sdb1 mounted_label_3
# blkid /dev/sdb1
/dev/sdb1: LABEL="mounted_label_3" ...
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a8bfd4abea3da0e28f215e2a2b8c2f1ca27ebe80
Btrfs: set/change the label of a mounted file system
[2] https://git.kernel.org/pub/scm/linux/kernel/git/kdave/btrfs-progs.git/commit/?id=619dc61cae1420da2dec48f689d49b9b346abc15
Btrfs-progs: Change the label of a mounted file system
Closes#163 - Feature request: set label on a mounted btrfs
For the same reason as in the previous commit, the UUID is copied when
copying every file system type except for XFS, where a new XFS is
created with a new UUID.
Again preview of the copy operation expects the UUID to be copied.
(Look in Partition > Information of the source and pasted partitions
before the operation is applied).
Fix as before by specifying the desired file system UUID when creating
the new XFS as part of the copy operation.
However there is an extra complication. The XFS kernel driver refuses
to mount a file system with a duplicate UUID of an already mounted XFS.
# mkfs.xfs -L xfs_copy /dev/sdb1
# mount /dev/sdb1 /mnt/1
# tail -2 /var/log/messages
Jun 3 21:41:24 localhost kernel: XFS (sdb1): Mounting V5 Filesystem
Jun 3 21:41:24 localhost kernel: XFS (sdb1): Ending clean mount
# /dev/sdb1: LABEL="xfs_copy" UUID="d654fc7f-e417-4ec6-88e8-8a7d0d46b7d8" TYPE="xfs"
# mkfs.xfs -L xfs_copy -m uuid="d654fc7f-e417-4ec6-88e8-8a7d0d46b7d8" /dev/sdb2
# mount /dev/sdb2 /mnt/2
mount: wrong fs type, bad option, bad superblock on /dev/sdb2,
missing codepage or helper program, or other error.
In some cases useful info is found in syslog - try
dmesg | tail or so.
# echo $?
32
# tail -1 /var/log/messages
Jun 3 21:41:31 localhost kernel: XFS (sdb2): File system has duplicate UUID d654fc7f-e417-4ec6-88e8-8a7d0d46b7d8 - can't mount
Handle this specifying the needed option [1] when mounting the second
XFS during the copy.
# mount -o nouuid /dev/sdb2 /mnt/2
# mount | grep /dev/sdb
/dev/sdb1 on /mnt/1 type xfs (rw,relatime,seclabel,attr2,inode64,noquota)
/dev/sdb1 on /mnt/1 type xfs (rw,relatime,seclabel,nouuid,attr2,inode64,noquota)
Duplicating the UUID may seem troublesome, but it is being done:
1. To make the GParted copied XFS be as much a clone as possible, to
match what is does with other file systems.
2. It has a valid use case; of cloning a Linux installation to a new
drive or restoring a partition image backup. In these cases it is
much simpler if the UUID of the copy remains the same because it
avoids having to edit GRUB2 configuration and fstab file system
mounting which is nearly always done via UUID.
3. GParted has the new UUID operation, to change the UUID for cases
when a copied file system needs to be mounted at the same time as
the source.
[1] xfs(5) - xfs - layout, mount options, and supported file attributes
for the XFS filesystem
https://man7.org/linux/man-pages/man5/xfs.5.html
"MOUNT OPTIONS
...
nouuid Don't check for double mounted file systems using the file
system uuid.
"
Closes!85 - Make XFS copy duplicate the file system label and UUID
As GParted performs block copy of partitions then the label, which is
stored in the file system superblock, is also copied. This is true for
copies performed using the GParted internal block copy and for EXT2/3/4
and NTFS which are copied using the file system specific commands
e2image and ntfsclone respectively. However when an XFS file system is
copied the label is not copied because a new file system is created
using mkfs.xfs and the files copied using xfsdump | xfsrestore.
Preview of the copy operation in GParted also reflects the fact that the
label will be copied.
Fix this by simply specifying the desired label when creating the new
destination XFS.
Closes!85 - Make XFS copy duplicate the file system label and UUID
Debian (and derived) distros with the udisks2 [1] repository and the
additional 'udisks2-inhibit' executable had the location changed from:
/usr/lib/udisks2/
to:
/usr/libexec/udisks2/
with udisks2 version 2.8.4-2 and the following commit:
f6744a33 - Move the daemons to /usr/libexec now that's allowed in the policy
f6744a3364
Distros such as Fedora and openSUSE are unaffected as the udisks [2]
repository does not contain 'udisks2-inhibit'.
[1] udisks2 Debian (and derived) repository
https://salsa.debian.org/utopia-team/udisks2
[2] udisks repository
https://github.com/storaged-project/udisksCloses!84 - Handle change in path for udisks2-inhibit executable
User reported that GParted didn't detect their eMMC drive [1]. Not
recognised device name was /dev/mmcblk0. Confirmed that the regression
was introduced by this commit [2]. Fix the code and regular expression
used to recognise SD/MMC device names.
[1] GParted forum thread: eMMC drive not detected...?
http://gparted-forum.surf4.info/viewtopic.php?id=17994
[2] 52930f30ae
Refactor load_proc_partitions_info_cache() a bit (#131)
Closes!83 - Fix recognition of SD/MMC device names
Mike Fleetwood