For the same reason as in the previous commit, the UUID is copied when
copying every file system type except for XFS, where a new XFS is
created with a new UUID.
Again preview of the copy operation expects the UUID to be copied.
(Look in Partition > Information of the source and pasted partitions
before the operation is applied).
Fix as before by specifying the desired file system UUID when creating
the new XFS as part of the copy operation.
However there is an extra complication. The XFS kernel driver refuses
to mount a file system with a duplicate UUID of an already mounted XFS.
# mkfs.xfs -L xfs_copy /dev/sdb1
# mount /dev/sdb1 /mnt/1
# tail -2 /var/log/messages
Jun 3 21:41:24 localhost kernel: XFS (sdb1): Mounting V5 Filesystem
Jun 3 21:41:24 localhost kernel: XFS (sdb1): Ending clean mount
# /dev/sdb1: LABEL="xfs_copy" UUID="d654fc7f-e417-4ec6-88e8-8a7d0d46b7d8" TYPE="xfs"
# mkfs.xfs -L xfs_copy -m uuid="d654fc7f-e417-4ec6-88e8-8a7d0d46b7d8" /dev/sdb2
# mount /dev/sdb2 /mnt/2
mount: wrong fs type, bad option, bad superblock on /dev/sdb2,
missing codepage or helper program, or other error.
In some cases useful info is found in syslog - try
dmesg | tail or so.
# echo $?
32
# tail -1 /var/log/messages
Jun 3 21:41:31 localhost kernel: XFS (sdb2): File system has duplicate UUID d654fc7f-e417-4ec6-88e8-8a7d0d46b7d8 - can't mount
Handle this specifying the needed option [1] when mounting the second
XFS during the copy.
# mount -o nouuid /dev/sdb2 /mnt/2
# mount | grep /dev/sdb
/dev/sdb1 on /mnt/1 type xfs (rw,relatime,seclabel,attr2,inode64,noquota)
/dev/sdb1 on /mnt/1 type xfs (rw,relatime,seclabel,nouuid,attr2,inode64,noquota)
Duplicating the UUID may seem troublesome, but it is being done:
1. To make the GParted copied XFS be as much a clone as possible, to
match what is does with other file systems.
2. It has a valid use case; of cloning a Linux installation to a new
drive or restoring a partition image backup. In these cases it is
much simpler if the UUID of the copy remains the same because it
avoids having to edit GRUB2 configuration and fstab file system
mounting which is nearly always done via UUID.
3. GParted has the new UUID operation, to change the UUID for cases
when a copied file system needs to be mounted at the same time as
the source.
[1] xfs(5) - xfs - layout, mount options, and supported file attributes
for the XFS filesystem
https://man7.org/linux/man-pages/man5/xfs.5.html
"MOUNT OPTIONS
...
nouuid Don't check for double mounted file systems using the file
system uuid.
"
Closes!85 - Make XFS copy duplicate the file system label and UUID
As GParted performs block copy of partitions then the label, which is
stored in the file system superblock, is also copied. This is true for
copies performed using the GParted internal block copy and for EXT2/3/4
and NTFS which are copied using the file system specific commands
e2image and ntfsclone respectively. However when an XFS file system is
copied the label is not copied because a new file system is created
using mkfs.xfs and the files copied using xfsdump | xfsrestore.
Preview of the copy operation in GParted also reflects the fact that the
label will be copied.
Fix this by simply specifying the desired label when creating the new
destination XFS.
Closes!85 - Make XFS copy duplicate the file system label and UUID
Debian (and derived) distros with the udisks2 [1] repository and the
additional 'udisks2-inhibit' executable had the location changed from:
/usr/lib/udisks2/
to:
/usr/libexec/udisks2/
with udisks2 version 2.8.4-2 and the following commit:
f6744a33 - Move the daemons to /usr/libexec now that's allowed in the policy
f6744a3364
Distros such as Fedora and openSUSE are unaffected as the udisks [2]
repository does not contain 'udisks2-inhibit'.
[1] udisks2 Debian (and derived) repository
https://salsa.debian.org/utopia-team/udisks2
[2] udisks repository
https://github.com/storaged-project/udisksCloses!84 - Handle change in path for udisks2-inhibit executable
User reported that GParted didn't detect their eMMC drive [1]. Not
recognised device name was /dev/mmcblk0. Confirmed that the regression
was introduced by this commit [2]. Fix the code and regular expression
used to recognise SD/MMC device names.
[1] GParted forum thread: eMMC drive not detected...?
http://gparted-forum.surf4.info/viewtopic.php?id=17994
[2] 52930f30ae
Refactor load_proc_partitions_info_cache() a bit (#131)
Closes!83 - Fix recognition of SD/MMC device names
So far when prompting for the LUKS passphrase the dialog always looks
like this:
+------------------------------------------------+
| LUKS Passphrase /dev/sdb1 |
+------------------------------------------------+
| Enter LUKS passphrase to open /dev/sdb1 |
| Passphrase: [ ] |
| |
| |
| [ Cancel ] [ Unlock ] |
+------------------------------------------------+
Specifically the first line of the dialog says the reason to provide the
passphrase is to open the encryption mapping. Now the passphrase may
also be requested when resizing the encryption mapping, as part of a
resize of check operation, show the appropriate reason in the password
dialog.
Closes#59 - Resize of LUKS2 encrypted file system fails with "Nothing
to read on input"
A check operation involves (1) checking the file system, (2) growing the
encryption volume and (3) growing the file system. Therefore prompt for
the LUKS passphrase as required when composing a check operation too.
Closes#59 - Resize of LUKS2 encrypted file system fails with "Nothing
to read on input"
This is the final piece which enables GParted to pass the LUKS
passphrase when resizing an open LUKS encryption mapping when
'cryptsetup resize' will prompt for it.
Closes#59 - Resize of LUKS2 encrypted file system fails with "Nothing
to read on input"
This is the equivalent to what was previously done when adding opening
of LUKS mappings. Namely to add a way to pass the LUKS passphrase to
'cryptsetup luksOpen' via standard input. Previously the functionality
was added to Utils::execute_command() [1]. Now it is also needed to
pass the LUKS passphrase to 'cryptsetup resize', which is executed as
part of applying resize and check operations to an encrypted file
system. So add this functionality to FileSystem::execute_command().
For now writing to stdin is only needed for the one variant of
FileSystem::execute_command() which doesn't have progress tracking
callbacks. Writing to stdin can easily be added to the other progress
tracking callback variants of execute_command() when needed.
[1] 8dff80edc6
Add ability for small writes to stdin of child processes (#795617)
Closes#59 - Resize of LUKS2 encrypted file system fails with "Nothing
to read on input"
When composing a resize operation on an open encryption mapping, use the
existing LUKS password dialog to prompt for the passphrase, if and only
if 'cryptsetup resize' will prompt and GParted doesn't already have a
password. 'cryptsetup resize' will prompt for a LUKS passphrase when
the passphrase was stored in the kernel keyring service,
key_loc == KEYLOC_KeyRing. See the previous commit "Capture LUKS
mapping master encryption key location (#59)" for more details.
As commented in the code GParted specifically doesn't support the case
where the LUKS passphrase is changed while GParted is running and it
knew the old passphrase. When resizing an open encryption mapping
GParted will just pass the old out of date passphrase it knows and the
resize will fail like this:
# cryptsetup status sdb2_crypt | egrep 'type|key location'
type: LUKS2
key location: keyring
# dmsetup table --target crypt
sdb2_crypt: 0 491520 crypt aes-xts-plain64 :64:logon:cryptsetup:3d040240-97ba-4559-af98-72c3be500498-d0 0 8:18 32768
# echo -n oldpassword | cryptsetup -v --size 491520 resize sdb2_crypt
No key available with this passphrase.
Command failed with code -2 (no permission or bad passphrase).
# echo $?
2
To work around this either close and restart GParted or close and reopen
the encryption mapping. The former because GParted doesn't save
passwords across a restart so will prompt and the latter because GParted
will use the wrong old passphrase to try to open the mapping and then
prompt for the correct passphrase until successfully opened.
Closes#59 - Resize of LUKS2 encrypted file system fails with "Nothing
to read on input"
ISSUE OVERVIEW
When GParted tries to resize an open LUKS encryption mapping and the
volume (master) key was stored in the kernel keyring service [1] it
fails like this:
Check and repair file system ([Encrypted] ext4) on /dev/...(ERROR)
+ calibrate /dev/sdd1 (SUCCESS)
+ check file system on /dev/mapper/sdd1_crypt for errors...(SUCCESS)
+ grow encryption volume to fill the partition (ERROR)
+ cryptsetup -v resize 'sdd1_crypt' (ERROR)
Command failed with code -1 (wrong or missing parameters).
Nothing to read on input.
This error occurs with cryptsetup >= 2.0, kernel >= 4.10 and LUKS2
format because the crypt Device-Mapper target no longer has the volume
key so cryptsetup resize prompts for a passphrase, but GParted doesn't
provide it.
THIS COMMIT
Additionally capture the location of the volume (master) key location
for active encryption mappings. Do this the using the same method that
cryptsetup uses [2][3]. Namely if the first character of the KEY is a
":" then the key *was* stored in the kernel keyring service, otherwise
it *is* store in the Device-Mapper crypt target as previously.
# echo -n badpassword | cryptsetup luksFormat --type luks1 /dev/sdb1 -
# echo -n badpassword | cryptsetup luksOpen /dev/sdb1 sdb1_crypt
# cryptsetup status sdb1_crypt | egrep 'type|key location'
type: LUKS1
key location: dm-crypt
# echo -n badpassword | cryptsetup luksFormat --type luks2 /dev/sdb2 -
# echo -n badpassword | cryptsetup luksOpen /dev/sdb2 sdb2_crypt
# cryptsetup status sdb2_crypt | egrep 'type|key location'
type: LUKS2
key location: keyring
# dmsetup table --target crypt
sdb1_crypt: 0 520192 crypt aes-xts-plain64 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 0 8:17 4096
sdb2_crypt: 0 491520 crypt aes-xts-plain64 :64:logon:cryptsetup:3d040240-97ba-4559-af98-72c3be500498-d0 0 8:18 32768
^
First character of the KEY field --------------'
[1] Integration with the kernel keyring service
https://gitlab.com/cryptsetup/cryptsetup/blob/v2.0.0/docs/Keyring.txt
"
Starting with cryptsetup 2.0 we load [Volume Key] VK in kernel
keyring by default for LUKSv2 devices ...
In summary, the key description visible in dm-crypt table line is a
reference to VK that usually no longer exists in kernel keyring
service if you used cryptsetup to for device activation.
"
[2] cryptsetup/v2.3.5/lib/libdevmapper.c:_dm_target_query_crypt()
https://gitlab.com/cryptsetup/cryptsetup/-/blob/v2.3.5/lib/libdevmapper.c#L2031
if (key_[0] == ':')
*act_flags |= CRYPT_ACTIVATE_KEYRING_KEY;
[3] cryptsetup/v2.3.5/src/cryptsetup.c:action_status()
https://gitlab.com/cryptsetup/cryptsetup/-/blob/v2.3.5/src/cryptsetup.c#L839
log_std(" key location: %s\n", (cad.flags & CRYPT_ACTIVATE_KEYRING_KEY) ? "keyring" : "dm-crypt");
Closes#59 - Resize of LUKS2 encrypted file system fails with "Nothing
to read on input"
When GParted probes an open encryption mapping which is either blank or
contains a file system which libparted doesn't recognise, such as:
exfat, f2fs, lvm2 pv, minix or reiser4, then the partition also gets
this warning message:
/dev/mapper/sdb11_crypt: unrecognised disk label
Clear the message so that it isn't shown in the GUI.
Note that the message is still written to stderr by GParted, like all
libparted exceptions are. This is done by GParted's libparted exception
handler:
GParted_Core::ped_exception_handler()
_ped_exception_handler()
Closes#152 - GParted crashed when trying to probe an encrypted
partition containing content that libparted doesn't
recognise
The previous commit "Resolve empty drive displayed as blank minor logic
issue (#152)" left the code in set_device_and_disk() some what
unsightly.
Refactor the whole function. Use if fail return early pattern for
failure of the get_device() call at the start of the function. Reorder
the 4 cases into a single depth if then else if chain. Hopefully this
is a little easier to follow.
Closes#152 - GParted crashed when trying to probe an encrypted
partition containing content that libparted doesn't
recognise
The previous commit "Remove coding landmine in get_disk() (#152)" made
an empty drive without a disk label (partition table) display as
nothing, instead of the normal single unallocated partition with warning
"unrecognised disk label".
The previous commit said:
3. The two remaining direct calls to get_disk() where the strict
parameter is explicitly set to false, from set_device_from_disk()
and detect_filesystem_in_encryption_mapping(), are when scanning.
As the pass strict=false they don't allow the PedDevice deletion
to occur if no recognised disk label is found.
This is true, but get_disk(..., strict=false) additionally returned true
even if there was no disk label. And in set_device_from_disk() the
empty drive case is inside the if branch of the get_disk() call
returning true.
Simply fix this by calling get_disk(), ignoring the return value.
Closes#152 - GParted crashed when trying to probe an encrypted
partition containing content that libparted doesn't
recognise
Claude Paroz